A Low-Power, High CMRR Neural Amplifier System Employing CMOS Inverter-Based OTAs With CMFB Through Supply Rails
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Multichannel neural amplifiers are commonly implemented with a shared reference whose input impedance is several times lower than that of the corresponding signal inputs. This huge impedance mismatch significantly degrades the total common mode rejection ratio (TCMRR) regardless of the amplifier's intrinsic CMRR (ICMRR). This study reports a multichannel neural amplifier system that eliminates this impedance mismatch problem by using single-ended CMOS-inverter-based preamplifiers for both the reference and signal inputs. A common-mode feedback (CMFB) loop through the supply rails of the preamplifiers is implemented to enhance their ac input common mode range to 220 mVpp and their ICMRR to more than 90 dB at low frequencies. The ICMRR is maintained above 80 dB up to 1 kHz by minimizing the load drive mismatch between the signal and reference preamplifiers. Implemented in a CMOS 65 nm process, this 16-channel amplifier system operates at 1 V and consumes 118 μW. It has input referred noise of 4.13 μVrms, leading to a noise efficiency factor (NEF) and a power efficiency factor (PEF) of 3.19 and 10.17, respectively. In vivo recordings of cortical neurons of a macaque were successfully acquired, demonstrating the ability of the amplifier to acquire neural signals in an unshielded environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neuronal ensemble control of prosthetic devices by a human with tetraplegia
Hochberg, L. R., Serruya, M. D., Friehs, G. M., Mukand, J. A., Saleh, M., Caplan, A. H., Branner, A., Chen, D., Penn, R. D., & Donoghue, J. P. (2006) · Nature · doi:10.1038/nature04970 · Cited by 3,295
A low-power low-noise cmos for amplifier neural recording applications
Harrison, R. R., & Charles, C. (2003) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2003.811979 · Cited by 1,695
A 128-Channel 6 mW Wireless Neural Recording IC With Spike Feature Extraction and UWB Transmitter
Chae, M. S., Yang, Z., Yuce, M. R., Hoang, L., & Liu, W. (2009) · IEEE Transactions on Neural Systems and Rehabilitation Engineering · doi:10.1109/tnsre.2009.2021607 · Cited by 369
Muller, R., Gambini, S., & Rabaey, J. M. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2163552 · Cited by 338
The Design of Integrated Circuits to Observe Brain Activity
Harrison, R. R. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.922581 · Cited by 330 · cited 1×
“The low-side cut-off frequency fL is tuned to be less than 10 mHz to reduce the pseudoresistor’s thermal noise contribution to the amplifier system, as proposed in [20] and [30].”
MethodA three-dimensional neural recording microsystem with implantable data compression circuitry
Olsson, R. H., & Wise, K. D. (2005) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2005.858479 · Cited by 245 · cited 1×
“In this work, the CC_LNA employs a CMOS-inverter-based OTA (CI_OTA) that has only a single major current-consuming path and adopts current-reuse [12] to increase the transconductance, therefore having a higher power efficiency than its differential counterparts [23], [27].”
MethodEnergy Efficient Low-Noise Neural Recording Amplifier With Enhanced Noise Efficiency Factor
Majidzadeh, V., Schmid, A., & Leblebici, Y. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2010.2078815 · Cited by 165 · cited 2×
“Commercially available electrodes typically have electrode impedances (at 1 kHz) ranging from 10 kΩ to 5 MΩ [17], and the majority of neural amplifiers report input capacitances (and impedance at 1 kHz) ranging from 10 pF (16 MΩ) [18] to 20 pF (8 MΩ) [19].”
BackgroundA 100-Channel 1-mW Implantable Neural Recording IC
Zou, X., Liu, L., Cheong, J. H., Yao, L., Li, P., Cheng, M.-Y., Goh, W. L., Rajkumar, R., Dawe, G. S., Cheng, K.-W., et al. (2013) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2013.2249175 · Cited by 132 · cited 2×
“In this work, the CC_LNA employs a CMOS-inverter-based OTA (CI_OTA) that has only a single major current-consuming path and adopts current-reuse [12] to increase the transconductance, therefore having a higher power efficiency than its differential counterparts [23], [27].”
BackgroundMethodMicera, S., Rossini, P. M., Rigosa, J., Citi, L., Carpaneto, J., Raspopovic, S., Tombini, M., Cipriani, C., Assenza, G., Carrozza, M. C., et al. (2011) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-8-53 · Cited by 100 · cited 1×
“N EURAL amplifiers are essential building blocks in numerous neuroscience experiments [1]–[3] and in neural prostheses [4]–[8], which are becoming increasingly widespread for the treatment of several neurological diseases.”
BackgroundA Compact, Low Input Capacitance Neural Recording Amplifier
Ng, K. A., & Xu, Y. P. (2013) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2013.2280066 · Cited by 81 · cited 4×
“The low-side cut-off frequency fL is tuned to be less than 10 mHz to reduce the pseudoresistor’s thermal noise contribution to the amplifier system, as proposed in [20] and [30].”
BackgroundMethodSelf-citation
Cited by
Chandrakumar, H., & Markovic, D. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2016.2645611 · Cited by 237
“4(a)] is among the most popular topologies used [14], [22]–[25].”
BackgroundNason, S. R., Vaskov, A. K., Willsey, M. S., Welle, E. J., An, H., Vu, P. P., Bullard, A. J., Nu, C. S., Kao, J. C., Shenoy, K. V., et al. (2020) · Nature Biomedical Engineering · doi:10.1038/s41551-020-0591-0 · Cited by 113
Multi-Channel Neural Recording Implants: A Review
Hashemi Noshahr, F., Nabavi, M., & Sawan, M. (2020) · Sensors · doi:10.3390/s20030904 · Cited by 66
“A few examples of such multistage amplifiers are provided in [58–62].”
BackgroundJeon, H., Bang, J.-S., Jung, Y., Choi, I., & Je, M. (2019) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2019.2930903 · Cited by 62
“The measurement results of the input-referred noise and CMRR are presented in Fig.”
InfluentialAn ultra-low-power neural signal acquisition analog front-end IC
Tran, L., & Cha, H.-K. (2021) · Microelectronics Journal · doi:10.1016/j.mejo.2020.104950 · Cited by 26
Metadata
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2016-03
- Volume
- 51
- Issue
- 3
- Pages
- 724-737
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2296102483
- Cited by
- 145
- References
- 10
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.