Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Open accessThe DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
The fault diagnosis of rotating electrical machines has received an intense amount of research interest during the last 30 years. Reducing maintenance costs and preventing unscheduled downtimes, which result in losses of production and financial incomes, are the priorities of electrical drives manufacturers and operators. In fact, both correct diagnosis and early detection of incipient faults lead to fast unscheduled maintenance and short downtime for the process under consideration. They also prevent the harmful and sometimes devastating consequences of faults and failures. This topic has become far more attractive and critical as the population of electric machines has greatly increased in recent years. The total number of operating electrical machines in the world was around 16.1 billion in 2011, with a growth rate of about 50% in the last five years [1].
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Signal processing in the frequency domain using FFT is established and still widely used as the basic diagnostic approach [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
In the citing paper
“The popularity of this method is related to its simplicity, low cost and online machine state monitoring capabilities [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationA Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Self-citationDetection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377 · cited 3×
“EncaaV [42] cPVPcP [43] ncaV [44] nrcE [45]”
BackgroundSelf-citationHenao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Self-citationOpen-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents
Sleszynski, W., Nieznanski, J., & Cichowski, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2023640 · Cited by 300
Research works printed but not linked: 4
- cardoso, 0, The Park's vector approach: A general tool for diagnostics of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1997), 261
- cabanas, 0, Experimental application of axial leakage flux to the detection of rotor asymmetries, mechanical anomalies and inter-turn short-circuits in working induction motors, Proc Int Conf Electric Machines (ICEM), 420
- 2000, IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery
- cardoso, 0, The Park's vector approach: New developments in on-line fault diagnosis of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1999), 89
Cited by
Items 201–300 of 661
Vlachou, V. I., Karakatsanis, T. S., & Efstathiou, D. E. (2025) · Applied System Innovation · doi:10.3390/asi8050154 · Cited by 24
Yang, S.-C., Chen, G., & Jian, D.-R. (2017) · IEEE Access · doi:10.1109/access.2017.2651113 · Cited by 23
Wei, H., Zhang, Y., Yu, L., Zhang, M., & Teffah, K. (2018) · Energies · doi:10.3390/en11061508 · Cited by 23
Panagiotou, P. A., Arvanitakis, I., Lophitis, N., Daviu, J. A. A., & Gyftakis, K. N. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2018.5512 · Cited by 23
Devarajan, G., Chinnusamy, M., & Kaliappan, L. (2020) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-020-01857-8 · Cited by 23
RetractedTime-Frequency Analysis Based on Minimum-Norm Spectral Estimation to Detect Induction Motor Faults
Garcia-Calva, T. A., Moríñigo-Sotelo, D., Duque-Pérez, Ó., García-Pérez, A., & Romero-Troncoso, R. D. J. (2020) · Energies · doi:10.3390/en13164102 · Cited by 23
Kompella, K. C. D., Rongala, N. S., Rayapudi, S. R., & Mannam, V. G. R. (2021) · IET Electric Power Applications · doi:10.1049/elp2.12049 · Cited by 23
Navarro-Navarro, Á., Zamudio-Ramírez, I., Biot-Monterde, V., Osornio-Rios, R. A., & Daviu, J. A. A. (2022) · Energies · doi:10.3390/en15072511 · Cited by 23
Condition Monitoring of Bearing Faults Using the Stator Current and Shrinkage Methods
Duque-Pérez, Ó., Pozo-Gallego, C. D., Moríñigo-Sotelo, D., & Godoy, W. F. (2019) · Energies · doi:10.3390/en12173392 · Cited by 23
Kuruppu, S. S., & Zou, Y. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.3010898 · Cited by 22
Smart classifier based prognostics and health management of induction motor
Jigyasu, R., Shrivastava, V., & Singh, S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.11.677 · Cited by 22
Biot-Monterde, V., Navarro-Navarro, Á., Zamudio-Ramírez, I., Daviu, J. A. A., & Osornio-Rios, R. A. (2022) · Sensors · doi:10.3390/s23010316 · Cited by 21
Ranzinger, L., Uhrig, S., & Tenbohlen, S. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3315341 · Cited by 21
Ertarğın, M., Orhan, A., Yıldırım, Ö., & Gürgenç, T. (2025) · Measurement · doi:10.1016/j.measurement.2025.117539 · Cited by 21
Saleh, S. A., & Ozkop, E. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2608945 · Cited by 21
Zurita, D., Delgado-Prieto, M., Saucedo-Dorantes, J. J., Carino, J. A., Osornio-Rios, R. A., Ortega, J. A., & Romero-Troncoso, R. D. J. (2016) · Shock and Vibration · doi:10.1155/2016/2683269 · Cited by 21
An accurate inter-turn short circuit faults model dedicated to induction motors
Babaa, F., & Bennis, O. (2020) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijece.v11i1.pp9-16 · Cited by 21
The Role of Fault Detection and Diagnosis in Induction Motors
Khaleel, M., Şimşir, M., Yusupov, Z., Yasser, N., El-Khozondar, H. J., & Ahmed, A. A. (2023) · International Journal of Electrical Engineering and Sustainability · doi:10.65998/ijees.v1i1.13 · Cited by 21
Research on an Adaptive Variational Mode Decomposition with Double Thresholds for Feature Extraction
Deng, W., Liu, H., Zhang, S., Liu, H., Zhao, H., & Wu, J. (2018) · Symmetry · doi:10.3390/sym10120684 · Cited by 21
Gangsar, P., & Tiwari, R. (2019) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · doi:10.1115/1.4043268 · Cited by 21
Chouhan, A., Gangsar, P., Porwal, R., & Mechefske, C. (2020) · Vibroengineering PROCEDIA · doi:10.21595/vp.2020.21334 · Cited by 21
Merizalde, Y., Hernández-Callejo, L., Duque-Pérez, Ó., & López-Meraz, R. A. (2020) · Applied Sciences · doi:10.3390/app10217389 · Cited by 20
Marzebali, M. H., Bazghandi, R., & Abolghasemi, V. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3201950 · Cited by 20
Gros, I.-C., Lü, X., Oprea, C. A., Lü, T., & Pintilie, L. (2023) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped54949.2023.10271490 · Cited by 20
Overview of Diagnostic Methods for Rotating Electrical Machines
Djagarov, N. F., Enchev, G., Grozdev, Z., & Djagarova, J. (2020) · International Conference on Energy Efficiency and Agricultural Engineering (EE&AE) · doi:10.1109/eeae49144.2020.9279018 · Cited by 20
Garcia-Calva, T. A., Moríñigo-Sotelo, D., & Romero-Troncoso, R. D. J. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2021.3124803 · Cited by 20
Fault Diagnosis for Rolling Bearings under Variable Conditions Based on Visual Cognition
Cheng, Y., Zhou, B., Lü, C., & Yang, C. (2017) · Materials · doi:10.3390/ma10060582 · Cited by 20
Liu, J., Chen, A., & Zhao, N. (2018) · Energies · doi:10.3390/en11010232 · Cited by 20
Advancements in fault detection and diagnosis methods for electric vehicles: a review
Kumar, M. P., Velpula, S., Saiprakash, C., & Sahoo, B. (2025) · Discover Applied Sciences · doi:10.1007/s42452-025-07758-9 · Cited by 19
Synchronous Salient Poles Fault Localization by SFRA and Fault Diagram Method
Mayora, H., Mugarra, A., Guerrero, J. M., & Platero, C. A. (2022) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2022.3182817 · Cited by 19
Martínez, M., Daviu, J. A. A., Dunai, L., Conejero, J. A., & de Córdoba, P. F. (2024) · Mathematics · doi:10.3390/math12244032 · Cited by 19
Li, J., Cheng, M., Wei, Y.-B., & Dai, Z. (2025) · Control Engineering Practice · doi:10.1016/j.conengprac.2025.106312 · Cited by 19
Zulkifli, N. Z., Bhukya, R., Bingi, K., Ibrahim, R., & Omar, M. (2025) · Machines · doi:10.3390/machines13050400 · Cited by 19
Control of Three-Phase Induction Machine Drives During Open-Circuit Fault: A Review
Tabasian, R., Ghanbari, M., Esmaeli, A., & Jannati, M. (2020) · IETE Journal of Research · doi:10.1080/03772063.2020.1724833 · Cited by 19
Induction Machine Stator Fault Tracking Using the Growing Curvilinear Component Analysis
Kumar, R., Randazzo, V., Cirrincione, G., Cirrincione, M., Pasero, E. G. A., Tortella, A., & Andriollo, M. (2020) · IEEE Access · doi:10.1109/access.2020.3047202 · Cited by 19
Zhao, S., Chen, Y., Rehman, A. U., Liang, F., Wang, S., Zhao, Y., Deng, W., Ma, Y., & Cheng, Y. (2021) · International Conference on Sensing, Measurement & Data Analytics in the era of Artificial Intelligence (ICSMD) · doi:10.1109/icsmd53520.2021.9670783 · Cited by 19
Lee, C., Zhuo, G., & Le, T. (2022) · Sensors · doi:10.3390/s22134705 · Cited by 19
Weighted Kernel Entropy Component Analysis for Fault Diagnosis of Rolling Bearings
Zhou, H., Shi, T., Liao, G., Xuan, J., Duan, J., Su, L., He, Z., & Lai, W. (2017) · Sensors · doi:10.3390/s17030625 · Cited by 19
He, H., Zhou, N., Guo, J., Zhang, Z., Lü, B., & Sun, C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.226 · Cited by 19
Zhang, Y., Wang, A., & Zuo, H. (2019) · Sensors · doi:10.3390/s19040824 · Cited by 19
Dong, K., Xu, K., Wang, L., Zhang, C., Jin, F., & Song, J. (2023) · Nonlinear Dynamics · doi:10.1007/s11071-023-09001-9 · Cited by 18
Partial Discharge Detection and Localization: Using Software-Defined Radio
Mohamed, H., Lazaridis, P. I., Mather, P. J., Tachtatzis, C., Judd, M. D., Atkinson, R. C., & Glover, I. A. (2019) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2019.2942209 · Cited by 18
Condition Assessment of Rotating Electrical Machines using SFRA - A Survey
Mayora, H., Álvarez, R. E., Bossio, G. R., & Calo, E. (2021) · IEEE Electrical Insulation Conference (EIC) · doi:10.1109/eic49891.2021.9612397 · Cited by 18
Bucci, G., Ciancetta, F., Fioravanti, A., Fiorucci, E., Mari, S., & Silvestri, A. (2023) · Sensors · doi:10.3390/s23052583 · Cited by 18
A Machine Condition Monitoring Framework Using Compressed Signal Processing
Rani, M., Dhok, S. B., & Deshmukh, R. B. (2020) · Sensors · doi:10.3390/s20010319 · Cited by 18
Chromatic Monitoring of Gear Mechanical Degradation Based on Acoustic Emission
Delgado-Prieto, M., & Zurita, D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2701761 · Cited by 17
Detection of Broken Rotor Bars in Induction Machines using Machine Learning Methods
Quabeck, S., Shangguan, W., Scharfenstein, D., & Doncker, R. W. D. (2020) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems50442.2020.9291033 · Cited by 17
Pushing Mechatronic Applications to the Limits via Smart Motion Control
Čech, M., Beltman, A.-J., & Ozols, K. (2021) · Applied Sciences · doi:10.3390/app11188337 · Cited by 17
Qian, W., Li, S., & Lu, J. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2022.104749 · Cited by 17
An Open-Circuit Fault Detection Method of PMSM Fed by Dual Inverter With High Robustness
Jiang, C., Liu, H., Wheeler, P. W., Wu, F., & Huo, J. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3263160 · Cited by 17
Fu, Q., Yue, S., He, B., & Fu, N. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2018.5397 · Cited by 17
Diagnosis of wind turbine faults using generator current signature analysis: a review
Merizalde, Y., Hernández-Callejo, L., Duque-Pérez, Ó., & Alonso‐Gómez, V. (2019) · Journal of Quality in Maintenance Engineering · doi:10.1108/jqme-02-2019-0020 · Cited by 17
Bonci, A., Fredianelli, L., Kermenov, R., Longarini, L., Longhi, S., Pompei, G., Prist, M., & Verdini, C. (2024) · Applied Sciences · doi:10.3390/app14198686 · Cited by 16
Fault detection in gear box with induction motors: an experimental study
Verucchi, C., Bossio, G. R., Bossio, J. M., & Acosta, G. G. (2016) · IEEE Latin America Transactions · doi:10.1109/tla.2016.7555245 · Cited by 16
Variable-frequency electric drive with a function of compensation for induction motor asymmetry
Zagirnyak, M. V., Kalinov, A. P., & Melnykov, V. (2017) · IEEE Ukraine Conference on Electrical and Computer Engineering (UKRCON) · doi:10.1109/ukrcon.2017.8100505 · Cited by 16
Tu, D., Zheng, J., Jiang, Z., & Pan, H. (2018) · Entropy · doi:10.3390/e20050360 · Cited by 16
Growing Curvilinear Component Analysis (GCCA) for Stator Fault Detection in Induction Machines
Cirrincione, G., Randazzo, V., Kumar, R., Cirrincione, M., & Pasero, E. G. A. (2019) · Smart innovation, systems and technologies · doi:10.1007/978-981-13-8950-4_22 · Cited by 15
Generation of a diagnosis model for hybrid-electric vehicles using machine learning
Meckel, S., Schuessler, T., Jaisawal, P. K., Yang, J.-U., & Obermaisser, R. (2020) · Microprocessors and Microsystems · doi:10.1016/j.micpro.2020.103071 · Cited by 15
Jung, W., Yun, S.-H., Lim, Y.-S., Cheong, S., Bae, J., & Park, Y. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968718 · Cited by 15
A new diagnostic instrument to detect generalized roughness in rolling bearings for induction motors
Frosini, L., Magnaghi, M., Albini, A., & Magrotti, G. (2015) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2015.7303696 · Cited by 15
Safa, H. H., Ebrahimi, M., Zarchi, H. A., & Abshari, M. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0201-6 · Cited by 15
A novel robust fault detection method for induction motor rotor by using unknown input observer
Soleymani, R., Nekoui, M. A., & Moarefianpour, A. (2019) · Systems Science & Control Engineering · doi:10.1080/21642583.2019.1578296 · Cited by 15
Skowron, M. (2020) · Bulletin of the Polish Academy of Sciences Technical Sciences · doi:10.24425/bpasts.2020.134664 · Cited by 15
Fault-tolerant control of an induction motor with broken stator electric circuit
Zagirnyak, M. V., Kalinov, A. P., Melnykov, V., & Stakhiv, P. (2016) · Electric Power Networks (EPNet) · doi:10.1109/epnet.2016.7999372 · Cited by 14
Review and Conceptual Design of FPGA-based Application for Data-Driven Power Electronic Systems
Zsuga, Á., & Dineva, A. A. (2021) · Conference on Electrical Machines, Drives and Power Systems (ELMA) · doi:10.1109/elma52514.2021.9503033 · Cited by 14
Fault Diagnosis Using Imbalanced Data of Rolling Bearings Based on a Deep Migration Model
Wang, H., & Zhang, X. (2024) · IEEE Access · doi:10.1109/access.2024.3350785 · Cited by 14
Fan, Y. J., Zhu, W., Zhang, X., & Zhang, L. (2015) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2015.7385220 · Cited by 14
Detection of External Rotor PMSM Inter-Turn Short Circuit Fault using Extended Kalman Filter
Belkhadir, A., Pusca, R., Romary, R., Belkhayat, D., & Zidani, Y. (2023) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped54949.2023.10271465 · Cited by 13
Self-citationChen, M., Zhang, B., Li, H., Gao, X. J., Wang, J., & Zhang, J. (2024) · Sensors · doi:10.3390/s24123747 · Cited by 13
Overview of IoT Security Challenges and Sensors Specifications in PMSM for Elevator Applications
Vlachou, E. I., Vlachou, V. I., Efstathiou, D. E., & Karakatsanis, T. S. (2024) · Machines · doi:10.3390/machines12120839 · Cited by 13
Wavelet Transformation-Based Diagnosis of Turn-to-Turn Faults in Vector Control Drive system
Eldeeb, H. H., Zhao, H., & Mohammed, O. A. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912295 · Cited by 13
Sikora, M., Szczyrba, K., Wróbel, Ł., & Michalak, M. (2019) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein.2019.2.19 · Cited by 13
Ameid, T., Ammar, A., Talhaoui, H., Azzoug, Y., & Chebaani, M. (2023) · Soft Computing · doi:10.1007/s00500-023-08443-y · Cited by 13
Wang, J., Cui, L., & Xu, Y. (2018) · Entropy · doi:10.3390/e20070510 · Cited by 13
Kumar, R., Cirrincione, G., Cirrincione, M., Andriollo, M., & Tortella, A. (2018) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2018.8507213 · Cited by 13
Vibration and Acoustics Analyses of Tapered Roller Bearing
Ansari, A. K., & Kumar, P. (2023) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-023-00991-9 · Cited by 12
Fault detection in magnetic wedges of induction motor
Bossio, G. R., de la Barrera, P. M., Bossio, J. M., Verucchi, C., & Leidhold, R. (2015) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2015.7281519 · Cited by 12
Reliable detection of broken rotor bars in induction motors via MUSIC and ZSC methods
Moríñigo-Sotelo, D., Romero-Troncoso, R. D. J., Daviu, J. A. A., & Gyftakis, K. N. (2016) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2016.7732932 · Cited by 12
Analysis of stator faults in induction machines using growing curvilinear component analysis
Kumar, R., Randazzo, V., Cirrincione, G., Cirrincione, M., & Pasero, E. G. A. (2017) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2017.8056240 · Cited by 12
Electric Stator Faults Detection in Induction Motor based on Fuzzy Logic Technique
LAKROUT, A., Bendjebbar, M., & Henini, N. (2018) · International Conference on Applied Smart Systems (ICASS) · doi:10.1109/icass.2018.8651983 · Cited by 12
Carino, J. A., Delgado-Prieto, M., Zurita, D., Picot, A., Ortega, J. A., & Romero-Troncoso, R. D. J. (2019) · ISA Transactions · doi:10.1016/j.isatra.2019.07.025 · Cited by 12
Detection of Broken Rotor Bars in a Cage Induction Machine Using DC Injection Braking
Jerkan, D. G., Reljic, D. D., Todorović, I., Isakov, I., Porobić, V., & Dujić, D. (2022) · IEEE Access · doi:10.1109/access.2022.3173352 · Cited by 12
Vibration-Based Adaptive Novelty Detection Method for Monitoring Faults in a Kinematic Chain
Carino, J. A., Saucedo-Dorantes, J. J., Zurita, D., Delgado-Prieto, M., Ortega, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J. (2016) · Shock and Vibration · doi:10.1155/2016/2417856 · Cited by 12
Yu, L., Zhang, Y., Huang, W., & Teffah, K. (2017) · Energies · doi:10.3390/en10040552 · Cited by 12
Induction Motor’s Bearing Fault Diagnosis Using an Improved Short Time Fourier Transform
Boudinar, A. H., Aimer, A. F., Khodja, M.-E.-A., & Benouzza, N. (2018) · Lecture notes in electrical engineering · doi:10.1007/978-3-319-97816-1_31 · Cited by 12
Martinez-Montes, E., Chillarón, L. J., Gilabert-Marzal, J., Daviu, J. A. A., & Quijano-López, A. (2018) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2018.8507224 · Cited by 12
Pérez‐Cruz, J., Puche‐Panadero, R., Pineda‐Sanchez, M., Riera‐Guasp, M., Martínez‐Román, J., & Sapena-Bañó, Á. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062390 · Cited by 11
Self-citationZhou, X., Hu, Q., Cui, P., Xu, X., & Mao, K. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3281683 · Cited by 11
Multiphase current imbalance localisation method applied to natural fault‐tolerant strategies
Salas‐Biedma, P., González‐Prieto, I., Duran, M. J., Bermúdez, M., & Barrero, F. (2020) · IET Electric Power Applications · doi:10.1049/iet-epa.2019.0985 · Cited by 11
Xiao, Y., Deng, S., Han, F., Wang, X., Jiang, Y., & Peng, K. (2022) · IEEE Access · doi:10.1109/access.2022.3195184 · Cited by 11
Condition monitoring of electrical machines and its relation to industrial internet
Belahcen, A., Gyftakis, K. N., Martinez, J., Climente-Alarcón, V., & Vaimann, T. (2015) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2015.7194535 · Cited by 11
A model-based signal processing method for fault diagnosis in PMSM machine
Heydarzadeh, M., Zafarani, M., Uğur, E., Akin, B., & Nourani, M. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096575 · Cited by 11
Li, Q. '., Hu, W. G., Peng, E., & Liang, S. Y. (2018) · Entropy · doi:10.3390/e20040263 · Cited by 11
Statistical Vibration-Based Fault Diagnosis Approach Applied To Brushless DC Motors
Alameh, K., Hoblos, G., & Barakat, G. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.09.599 · Cited by 11
Dehina, W., Boumehraz, M., & Kratz, F. (2020) · International Transactions on Electrical Energy Systems · doi:10.1002/2050-7038.12737 · Cited by 11
Fault Diagnosis in Electrical Machines for Traction Applications: Current Trends and Challenges
Pastura, M., & Zigliotto, M. (2024) · Energies · doi:10.3390/en17215440 · Cited by 10
AI-Driven Resilient Fault Diagnosis of Bearings in Rotating Machinery
Naqvi, S. M. W. U. H., Arif, A., Khan, A. A., Bangash, F., Sirewal, G. J., & Huang, B. (2025) · Sensors · doi:10.3390/s25227092 · Cited by 10
Canseven, H. T., Sadık, E. Ş., Cömert, M., & Ünsal, A. (2026) · IET Power Electronics · doi:10.1049/pel2.70203 · Cited by 10
Chikkam, S., & Singh, S. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00835-y · Cited by 10
Barmpatza, A. C. (2023) · Machines · doi:10.3390/machines11060647 · Cited by 10
Metadata
- Authors
- Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S.
- Affiliations
- Université de Picardie Jules Verne (FR)
- University of Bologna (IT)
- Sapienza University of Rome (IT)
- Michigan State University (US)
- University of Beira Interior (PT)
- Venue
- IEEE Industrial Electronics Magazine
- Published
- 2014-06
- Volume
- 8
- Issue
- 2
- Pages
- 31-42
- ISSN
- 1932-4529 (ISSN-L)
- OpenAlex
- W1983638645
- Cited by
- 602
- References
- 54
- Citations by year
- 2026: 23 · 2025: 39 · 2024: 37 · 2023: 42 · 2022: 64 · 2021: 54 · 2020: 57 · 2019: 79 · 2018: 54 · 2017: 71 · 2016: 48 · 2015: 26 · 2014: 7
- FWCI
- 56.41
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Industrial Electronics Magazine (publishedVersion)
- Consultation of the Doctoral Thesis Database (TESEO) (Ministerio de Educación, Cultura y Deporte) (submittedVersion, cc-by-nc-nd)
- IRIS Research product catalog (Sapienza University of Rome) (submittedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- fault diagnosis, rotating electrical machines, early fault detection, predictive maintenance, maintenance cost reduction, unplanned downtime, electric drives, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.