Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Open accessThe DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
The fault diagnosis of rotating electrical machines has received an intense amount of research interest during the last 30 years. Reducing maintenance costs and preventing unscheduled downtimes, which result in losses of production and financial incomes, are the priorities of electrical drives manufacturers and operators. In fact, both correct diagnosis and early detection of incipient faults lead to fast unscheduled maintenance and short downtime for the process under consideration. They also prevent the harmful and sometimes devastating consequences of faults and failures. This topic has become far more attractive and critical as the population of electric machines has greatly increased in recent years. The total number of operating electrical machines in the world was around 16.1 billion in 2011, with a growth rate of about 50% in the last five years [1].
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Signal processing in the frequency domain using FFT is established and still widely used as the basic diagnostic approach [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
In the citing paper
“The popularity of this method is related to its simplicity, low cost and online machine state monitoring capabilities [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationA Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Self-citationDetection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377 · cited 3×
“EncaaV [42] cPVPcP [43] ncaV [44] nrcE [45]”
BackgroundSelf-citationHenao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Self-citationOpen-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents
Sleszynski, W., Nieznanski, J., & Cichowski, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2023640 · Cited by 300
A New Approach for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Source Inverters
Estima, J. O., & Marques Cardoso, A. J. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2168800 · Cited by 298
Self-citationOpen-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications
Freire, N. M. A., Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2207655 · Cited by 277
Self-citationA Probabilistic Fault Detection Approach: Application to Bearing Fault Detection
Zhang, B., Sconyers, C., Byington, C., Patrick, R., Orchard, M. E., & Vachtsevanos, G. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2058072 · Cited by 269
Riera-Guasp, M., Antonino-Daviu, J. A., Pineda-Sanchez, M., Puche-Panadero, R., & Perez-Cruz, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004378 · Cited by 267
Self-citationStudy of Rotor Faults in Induction Motors Using External Magnetic Field Analysis
Ceban, A., Pusca, R., & Romary, R. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2163285 · Cited by 249
Self-citationAdvanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines
Gritli, Y., Zarri, L., Rossi, C., Filippetti, F., Capolino, G.-A., & Casadei, D. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236992 · Cited by 193
Self-citationStone, G. C., Boulter, E. A., Culbert, I., & Dhirani, H. (2004) · IEEE Electrical Insulation Magazine · doi:10.1109/mei.2004.1307097 · Cited by 170
Incipient Bearing Fault Detection via Motor Stator Current Noise Cancellation Using Wiener Filter
Zhou, W., Lu, B., Habetler, T. G., & Harley, R. G. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023566 · Cited by 165
Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis
Toliyat, H. A., Nandi, S., Choi, S., & Kelk, H. M. (2012) · CRC Press eBooks · doi:10.1201/b13008 · Cited by 162
Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters
Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055772 · Cited by 157
Recent advances in fault diagnosis by Park's vector approach
Estima, J. O., Freire, N. M. A., & Cardoso, A. J. M. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525187 · Cited by 134
Self-citationFilippetti, F., Bellini, A., & Capolino, G. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525180 · Cited by 130
Self-citationKia, S. H., Henao, H., & Capolino, G. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.292 · Cited by 123
Self-citationElectrical machines fault diagnosis by stray flux analysis
Romary, R., Pusca, R., Lecointe, J., & Brudny, J. F. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525184 · Cited by 106
Self-citationAmarnath, M., & Krishna, I. R. P. (2012) · IET Science Measurement & Technology · doi:10.1049/iet-smt.2011.0082 · Cited by 97
Bruzzese, C., & Joksimović, G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2087296 · Cited by 96
Self-citationBoukra, T., Lebaroud, A., & Clerc, G. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2216242 · Cited by 91
Recent Important Changes in IEEE Motor and Generator Winding Insulation Diagnostic Testing Standards
Stone, G. C. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.840977 · Cited by 91
Diagnosis of Induction Machines' Rotor Faults in Time-Varying Conditions
Stefani, A., Bellini, A., & Filippetti, F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2016517 · Cited by 83
Self-citationClimente-Alarcon, V., Antonino-Daviu, J. A., Riera-Guasp, M., Puche-Panadero, R., & Escobar, L. (2012) · Electric Power Systems Research · doi:10.1016/j.epsr.2012.05.001 · Cited by 78 · cited 1×
“Regarding quadratic transforms, in [52], a method based on a pretreatment of the diagnosis signal through optimized notch filters is proposed for reducing cross terms but avoiding the use of kernels, keeping the characteristic high resolution of the WVD unaltered.”
MethodSelf-citationŽarko, D., Ban, D., Vazdar, I., & Jarica, V. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2160515 · Cited by 77
Wu, L., Huang, X., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900542 · Cited by 59
García, J. R., Romeral, L., Rosero, E., & Urresty, J.-C. (2009) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802777 · Cited by 57
Efficient digital signal processing techniques for induction machines fault diagnosis
Kia, S. H., Henao, H., & Capolino, G. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525183 · Cited by 53
Self-citationAn ESPRIT-SAA-Based Detection Method for Broken Rotor Bar Fault in Induction Motors
Xu, B., Sun, L., Xu, L., & Xu, G. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2012.2194148 · Cited by 51
Stator winding failures: contamination, surface discharge, tracking
Dymond, J. H., Stranges, N., Younsi, K., & Hayward, J. E. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/28.993182 · Cited by 48
KAMEARI, A. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43870 · Cited by 46
Analytical computation of an AC machine external magnetic field
Romary, R., Roger, D., & Brudny, J. F. (2009) · The European Physical Journal Applied Physics · doi:10.1051/epjap/2009102 · Cited by 46
Kia, S. H., Henao, H., & Capolino, G. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350079 · Cited by 40
Self-citationKral, C., Pirker, F., Pascoli, G., & Kapeller, H. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2005176 · Cited by 38
Some digital signal processing techniques for induction machines diagnosis
Kia, S. H., Henao, H., & Capolino, G. (2011) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2011.6063643 · Cited by 37
Self-citation(2024) · IEEE Standards · doi:10.1109/ieeestd.2024.10636032 · Cited by 36
Detection of stator winding insulation failures: On-line and off-line tests
Cabanas, M. F., Norniella, J. G., Melero, M. G., Rojas, C. H., Cano, J. M., Pedrayes, F., & Orcajo, G. A. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525181 · Cited by 32
Gritli, Y., Rossi, C., Zarri, L., Filippetti, F., Chatti, A., & Casadei, D. (2011) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2011.6063697 · Cited by 29
Self-citationWindings monitoring of wound rotor induction machines under fluctuating load conditions
Kia, S. H., Henao, H., & Capolino, G. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119868 · Cited by 28
Self-citationToward Practical Quantification of Induction Drive Mixed Eccentricity
Concari, C., Franceschini, G., & Tassoni, C. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124434 · Cited by 27
Contribution to the study of leakage fields at the ends of rotating electrical machines
Tavner, P. J., Hammond, P., & Penman, J. (1978) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1978.0286 · Cited by 27
Monitoring partial discharges on 4-kV motor windings
Tetrault, S. M., Stone, G. C., & Sedding, H. G. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.767022 · Cited by 26
Diagnosis of induction machines under non-stationary conditions: Concepts and tools
Riera‐Guasp, M., Pons-Llinares, J., Climente-Alarcón, V., Vedreno-Santos, F., Pineda‐Sanchez, M., Daviu, J. A. A., Puche‐Panadero, R., Pérez‐Cruz, J., & Roger-Folch, J. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525182 · Cited by 19
Self-citationStrangas, E. G. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525188 · Cited by 18
Self-citationVedreno-Santos, F., Riera‐Guasp, M., Henao, H., Pineda‐Sanchez, M., & Daviu, J. A. A. (2012) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2012.6388979 · Cited by 17
Self-citationVedreño‐Santos, F., Riera‐Guasp, M., Henao, H., & Pineda‐Sanchez, M. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350102 · Cited by 10
Self-citationBruzzese, C. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525185 · Cited by 10
Self-citationTest of insulation of bars and coils of high-voltage machines
(2015) · BSI Standards · doi:10.3403/01908666u · Cited by 3
Research works printed but not linked: 4
- cardoso, 0, The Park's vector approach: A general tool for diagnostics of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1997), 261
- cabanas, 0, Experimental application of axial leakage flux to the detection of rotor asymmetries, mechanical anomalies and inter-turn short-circuits in working induction motors, Proc Int Conf Electric Machines (ICEM), 420
- 2000, IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery
- cardoso, 0, The Park's vector approach: New developments in on-line fault diagnosis of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1999), 89
Cited by
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
Self-citationA Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Caesarendra, W., & Tjahjowidodo, T. (2017) · Machines · doi:10.3390/machines5040021 · Cited by 427
Glowacz, A., Glowacz, W., Glowacz, Z., & Kozik, J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.036 · Cited by 374
Metadata
- Authors
- Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S.
- Affiliations
- Université de Picardie Jules Verne (FR)
- University of Bologna (IT)
- Sapienza University of Rome (IT)
- Michigan State University (US)
- University of Beira Interior (PT)
- Venue
- IEEE Industrial Electronics Magazine
- Published
- 2014-06
- Volume
- 8
- Issue
- 2
- Pages
- 31-42
- ISSN
- 1932-4529 (ISSN-L)
- OpenAlex
- W1983638645
- Cited by
- 602
- References
- 54
- Citations by year
- 2026: 23 · 2025: 39 · 2024: 37 · 2023: 42 · 2022: 64 · 2021: 54 · 2020: 57 · 2019: 79 · 2018: 54 · 2017: 71 · 2016: 48 · 2015: 26 · 2014: 7
- FWCI
- 56.41
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Industrial Electronics Magazine (publishedVersion)
- Consultation of the Doctoral Thesis Database (TESEO) (Ministerio de Educación, Cultura y Deporte) (submittedVersion, cc-by-nc-nd)
- IRIS Research product catalog (Sapienza University of Rome) (submittedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- fault diagnosis, rotating electrical machines, early fault detection, predictive maintenance, maintenance cost reduction, unplanned downtime, electric drives, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.