Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Open accessThe DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
The fault diagnosis of rotating electrical machines has received an intense amount of research interest during the last 30 years. Reducing maintenance costs and preventing unscheduled downtimes, which result in losses of production and financial incomes, are the priorities of electrical drives manufacturers and operators. In fact, both correct diagnosis and early detection of incipient faults lead to fast unscheduled maintenance and short downtime for the process under consideration. They also prevent the harmful and sometimes devastating consequences of faults and failures. This topic has become far more attractive and critical as the population of electric machines has greatly increased in recent years. The total number of operating electrical machines in the world was around 16.1 billion in 2011, with a growth rate of about 50% in the last five years [1].
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Signal processing in the frequency domain using FFT is established and still widely used as the basic diagnostic approach [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
In the citing paper
“The popularity of this method is related to its simplicity, low cost and online machine state monitoring capabilities [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationA Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Self-citationDetection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377 · cited 3×
“EncaaV [42] cPVPcP [43] ncaV [44] nrcE [45]”
BackgroundSelf-citationHenao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Self-citationOpen-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents
Sleszynski, W., Nieznanski, J., & Cichowski, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2023640 · Cited by 300
Research works printed but not linked: 4
- cardoso, 0, The Park's vector approach: A general tool for diagnostics of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1997), 261
- cabanas, 0, Experimental application of axial leakage flux to the detection of rotor asymmetries, mechanical anomalies and inter-turn short-circuits in working induction motors, Proc Int Conf Electric Machines (ICEM), 420
- 2000, IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery
- cardoso, 0, The Park's vector approach: New developments in on-line fault diagnosis of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1999), 89
Cited by
Items 301–400 of 661
Condition Monitoring and Fault Diagnosis of Generators in Power Networks
Yang, B., Li, F., Ye, J., & Song, W. (2019) · IEEE Power Engineering Society General Meeting · doi:10.1109/pesgm40551.2019.8973427 · Cited by 10
Detection of Broken Rotor Bars in Induction Machines using Machine Learning Methods
Quabeck, S., Shangguan, W., Scharfenstein, D., & Doncker, R. W. D. (2021) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.21000651 · Cited by 10
Stator Fault Detection in Induction Motors by Autoregressive Modeling
Garcia-Guevara, F. M., Villalobos-Piña, F. J., Álvarez-Salas, R., Cabal‐Yépez, E., & Gonzalez-Garcia, M. A. (2016) · Mathematical Problems in Engineering · doi:10.1155/2016/3409756 · Cited by 10
Bruzzese, C., Tessarolo, A., & Santini, E. (2016) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2016.7732835 · Cited by 10
Self-citationFireţeanu, V., Leconte, V., & Constantin, A.-I. (2017) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/optim.2017.7975006 · Cited by 10
Irhoumah, M., Mercier, D., Pusca, R., Lefèvre, É., & Romary, R. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8217417 · Cited by 10
Self-citationPerformance of the Stator Winding Fault Diagnosis in Sensorless Induction Motor Drive
Tarchała, G., & Wolkiewicz, M. (2019) · Energies · doi:10.3390/en12081507 · Cited by 10
Luo, G., Habetler, T. G., & Hurwitz, J. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912275 · Cited by 10
Advances in diagnosis of electrical machines through external magnetic field
Pusca, R., & Romary, R. (2015) · International Conference on Electronics, Computers and Artificial Intelligence (ECAI) · doi:10.1109/ecai.2015.7301137 · Cited by 10
Self-citationBarusu, M. R., Umamaheswari, S., & Meganathan, D. (2018) · IET Power Electronics · doi:10.1049/iet-pel.2017.0267 · Cited by 10
Jankowska, K., & Ewert, P. (2021) · Power Electronics and Drives · doi:10.2478/pead-2021-0008 · Cited by 9
“Most of the methods are based on the analysis of the diagnostic signal (Henao et al., 2014).”
MethodFerraris, L., Pošković, E., & Franchini, F. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062414 · Cited by 9
Bearing fault diagnosis based on Lasso regularization method
Duque-Pérez, Ó., Pozo-Gallego, C. D., Moríñigo-Sotelo, D., & Godoy, W. F. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062376 · Cited by 9
Koutrakos, K., & Mitronikas, E. D. (2024) · Applied Sciences · doi:10.3390/app14104318 · Cited by 9
Merizalde, Y., Hernández-Callejo, L., Duque-Pérez, Ó., & Alonso‐Gómez, V. (2021) · Applied Sciences · doi:10.3390/app11156942 · Cited by 9
Jeong, H., Lee, H., Kim, S., & Kim, S. W. (2022) · Sensors · doi:10.3390/s22124597 · Cited by 9
Skowron, M., Kowalski, C. T., & Orłowska-Kowalska, T. (2022) · Energies · doi:10.3390/en15197008 · Cited by 9
Ebrahimi, M., Kazemi, M. V., & Gholamian, S. A. (2022) · Electric Power Components and Systems · doi:10.1080/15325008.2022.2136789 · Cited by 9
PMSM Model with Phase-to-Phase Short-Circuit and Diagnosis by ESA and EPVA
Bouchareb, C., & Naït‐Saïd, M. S. (2016) · Advances in Electrical and Electronic Engineering · doi:10.15598/aeee.v14i5.1928 · Cited by 9
Ewert, P. (2019) · Power Electronics and Drives · doi:10.2478/pead-2019-0001 · Cited by 9
Simplified automatic fault detection in wind turbine induction generators
Brigham, K., Zappalá, D., Crabtree, C., & Donaghy‐Spargo, C. (2020) · Wind Energy · doi:10.1002/we.2478 · Cited by 9
Fu, Q., Guo, Q., Zhang, W., Cui, W., & Zhao, L. (2021) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.2984 · Cited by 9
Combined Electrical Faults Detection and Diagnosis Using Current Signature Analysis
Babaa, F., Bennis, O., Kratz, F., & Hadri-Hamida, A. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605509 · Cited by 9
Application of anomaly technique in wind turbine bearing fault detection
Purarjomandlangrudi, A., Nourbakhsh, G., Ghaemmaghami, H., & Tan, A. C. C. (2014) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2014.7048774 · Cited by 9
The enhancements of broken bar fault detection in induction motors
Bendiabdellah, A., Boudinar, A. H., Benouzza, N., & Khodja, M.-E.-A. (2015) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/optim.2015.7426972 · Cited by 9
Real-time remote monitoring of an air compressor using MTConnect standard protocol
Verma, N. K., Dev, R., Dhar, N. K., Singh, D. J., & Salour, A. (2017) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2017.7998314 · Cited by 9
Fault Diagnosis in Electric Generators: Methods, Trends and Challenges
Ptochos, K., Koutrakos, K., & Mitronikas, E. D. (2025) · Energies · doi:10.3390/en18236210 · Cited by 8
Wireless Health Monitoring System for Rotor Eccentricity Faults Detection in Induction Machine
Ouachtouk, I., Hani, S. E., & Dahi, K. (2017) · Advances in Electrical and Electronic Engineering · doi:10.15598/aeee.v15i3.2193 · Cited by 8
A Topological and Neural Based Technique for Classification of Faults in Induction Machines
Kumar, R., Cirrincione, G., Cirrincione, M., Tortella, A., & Andriollo, M. (2018) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems.2018.8549509 · Cited by 8
Duda, A., & Sułowicz, M. (2020) · Energies · doi:10.3390/en13143544 · Cited by 8
Time‐Frequency Domain Analysis
Nandi, A. K., & Ahmed, H. (2019) · Wiley eBooks · doi:10.1002/9781119544678.ch5 · Cited by 8
An improved diagnostic system to detect inter-turns short circuits in low voltage stator windings
Frosini, L., Magnaghi, M., & Albini, A. (2015) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2015.7194533 · Cited by 8
Kumar, P. S., Xie, L., Soong, B., & Lee, M. Y. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2821266 · Cited by 8
A Fault Diagnosis Strategy for Rotor Windings Inter-turn Short Circuit of Synchronous Condenser
Wei, C. Y., Sun, L., Wang, W., Lin, Y., Tian, W., & Cheng, M. (2019) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2019.8921627 · Cited by 8
Messtechnik und Prüfstände für Verbrennungsmotoren
Borgeest, K. (2016) · Springer eBooks · doi:10.1007/978-3-658-10118-3 · Cited by 8
Gritli, Y., Rossi, C., Casadei, D., & Filippetti, F. (2016) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2016.7732934 · Cited by 8
Self-citationDetection of mechanical faults in induction machines with infrared thermography: Field cases
Lopez-Perez, D., & Daviu, J. A. A. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793604 · Cited by 8
Yapay Sinir Ağlarıyla Asenkron Motor Çoklu Arızalarının Tespiti ve Sınıflandırılması
Kaya, K., & Ünsal, A. (2021) · Journal of Polytechnic · doi:10.2339/politeknik.933826 · Cited by 8
Mitra, S. K., & Koley, C. (2016) · International Conference on Control, Instrumentation, Energy & Communication · doi:10.1109/ciec.2016.7513756 · Cited by 8
Vu, H., Yahoui, H., & Hammouri, H. (2019) · International Transactions on Electrical Energy Systems · doi:10.1002/2050-7038.12019 · Cited by 8
Benninger, M., & Liebschner, M. (2024) · Energies · doi:10.3390/en17153723 · Cited by 7
Burriel-Valencia, J., Puche‐Panadero, R., Martínez‐Román, J., Sapena-Bañó, Á., & Pineda‐Sanchez, M. (2019) · Sensors · doi:10.3390/s19163471 · Cited by 7
Wavelet entropy to estimate the winding insulation healthiness in induction motors
Zamudio-Ramírez, I., Osornio-Rios, R. A., Romero-Troncoso, R. D. J., & Daviu, J. A. A. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8927544 · Cited by 7
Gritli, Y., Rossi, C., Rizzoli, G., Zarri, L., Tani, A., & Casadei, D. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605521 · Cited by 7
Detection of Shaft Misalignment of a PMSM using Zoom-FFT
Koutrakos, K., & Mitronikas, E. D. (2023) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped54949.2023.10271410 · Cited by 7
Kumar, P. S., Xie, L., & Soong, B. (2016) · International Conference on Electrical Machines and Systems (ICEMS) · Cited by 7
An Open-phase Fault Detection Method for Six-phase Induction Motor Drives
Rios-Garcia, N., Duran, M. J., González‐Prieto, I., Martín, C., & Barrero, F. (2017) · Renewable Energy and Power Quality Journal · doi:10.24084/repqj15.358 · Cited by 7
Hussein, I. M., Al‐Hamouz, Z., Abido, M. A., & Milhem, A. S. (2018) · Energies · doi:10.3390/en11010197 · Cited by 7
Design for improved fault tolerance in large synchronous machines
Tessarolo, A., & Luise, F. (2015) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2015.7194488 · Cited by 7
Automatic fault diagnosis in PMSM using adaptive filtering and wavelet transform
Heydarzadeh, M., Zafarani, M., Akin, B., & Nourani, M. (2017) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2017.8002381 · Cited by 7
Broken rotor bar fault classification for induction motor based on support vector machine-SVM
Mohsun, N. A. (2017) · International Conference on Engineering & MIS (ICEMIS) · doi:10.1109/icemis.2017.8273104 · Cited by 7
Novelty Detection based Condition Monitoring Scheme Applied to Electromechanical Systems
Delgado-Prieto, M., Carino, J. A., Saucedo-Dorantes, J. J., Osornio-Rios, R. A., Romeral, L., & Romero-Troncoso, R. D. J. (2018) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2018.8502503 · Cited by 7
Survey of real-time fault diagnosis techniques for electromechanical systems
Kia, S. H., Henao, H., & Capolino, G. (2017) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2017.7947761 · Cited by 7
Self-citationRotor mounted wireless sensors for condition monitoring of brushless synchronous generator
Kumar, P. S., Xie, L., Thiha, K., Soong, B., Vaiyapuri, V., & Nadarajan, S. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8216544 · Cited by 7
Online stator end winding thermography using infrared sensor array
Kumar, P. S., Xie, L., Sathik, M. H. M., & Vaiyapuri, V. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341361 · Cited by 7
Palácios, R. H. C. (2016) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.18.2016.tde-03062016-110622 · Cited by 7
Aswad, R. A. K., Számel, L., & Jassim, B. M. H. (2025) · IEEE Access · doi:10.1109/access.2025.3637859 · Cited by 6
Salas‐Biedma, P., González‐Prieto, I., & Duran, M. J. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8927022 · Cited by 6
Stator Phase Current STFT analysis for the PMSM Stator Winding Fault Diagnosis
Pietrzak, P., & Wolkiewicz, M. (2022) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam53979.2022.9841990 · Cited by 6
Zamudio-Ramírez, I., Biot-Monterde, V., Navarro-Navarro, Á., Daviu, J. A. A., Osornio-Rios, R. A., Mäki-Ontto, P., Salmia, L., & Fajt, T. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968667 · Cited by 6
Daviu, J. A. A., Martínez-Giménez, F., Peris, A., Ramezanzadeh, N., & Ródenas, F. (2024) · Mathematics · doi:10.3390/math12071057 · Cited by 6
AI-Based Speed Adaptive Fault Diagnosis in Induction Motors Using Vibration Signal
Atif, M., Khan, F., Azmat, S., & Bibi, A. (2024) · International Conference on Frontiers of Information Technology (FIT) · doi:10.1109/fit63703.2024.10838415 · Cited by 6
Deep Learning Based Fault Detection Method in DC Motor Start
Yousefnejad, S., Bagheri, F., Alshawi, R., Hoque, M. T., & Amiri, E. (2025) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2025.3560559 · Cited by 6
Using Motor Current Analysis for Broken Rotor Bar Fault Detection in Rotary Machines
Sharma, A., Verma, P. K., Mathew, L., & Chatterji, S. (2018) · International Conference on Communication and Electronics Systems (ICCES) · doi:10.1109/cesys.2018.8724071 · Cited by 6
Yang, Q., Dong, K., Song, J., Jin, F., Mo, W., & Hui, Y. (2021) · IEEE International Conference on Communication Software and Networks · doi:10.1109/iccsn52437.2021.9463633 · Cited by 6
Gangsar, P., Ali, Z., Chouksey, M., & Parey, A. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-4222-7_55 · Cited by 6
Observer-Based Active Fault-Tolerant Control of an Asymmetric Twin Wind Turbine
Makni, M., Haidar, I., Barbot, J., Plestan, F., Féki, N., & Abbès, M. S. (2022) · Information · doi:10.3390/info13030113 · Cited by 6
Shelehov, I. V., Барченко, Н. Л., Prylepa, D., & Bibyk, M. (2022) · Radio Electronics Computer Science Control · doi:10.15588/1607-3274-2022-18 · Cited by 6
He, R., Qiao, J., Peng, Y., Yin, X., Wang, Y., Zhang, H., & Wang, W. (2022) · Applied Sciences · doi:10.3390/app12157783 · Cited by 6
Realtime Non-invasive Fault Diagnosis of Three-phase Induction Motor
Nguyen, V. K., Tran, V.-K., Nguyen, M. K., Thach, V. T. E., Pham, T. L. H., & Nguyen, C.-N. (2022) · Technical Education Science/Giáo dục Kỹ thuật · doi:10.54644/jte.72b.2022.1231 · Cited by 6
Condition Monitoring of Industrial Elevators Based on Machine Learning Models
Raia, M. R., Ailincai, A., Băicoianu, A., Husar, C., & Irimia, C. (2023) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa54631.2023.10275563 · Cited by 6
Yang, S.-C., Hsu, Y., Chou, P., Jian, D.-R., & Chen, G. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8095808 · Cited by 6
Shao, M., Yang, G., Sun, G., & Su, J. (2019) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2019.8921763 · Cited by 6
Poce, M., Casiello, G., Ferrari, L., Dei, L. F. N., & Saponara, S. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-3-030-66729-0_15 · Cited by 6
Broken rotor bars fault detection in induction motors based on current envelope and neural network
Mustafa, M. O. (2021) · Eastern-European Journal of Enterprise Technologies · doi:10.15587/1729-4061.2021.227315 · Cited by 6
Indirect monitoring and early detection of faults in trains' motors
Jain, A., Barmada, S., Crisostomi, E., Romano, F., Tavano, F., & Tucci, M. (2018) · IET Electrical Systems in Transportation · doi:10.1049/iet-est.2017.0056 · Cited by 6
Use of a combined SVD-Kalman filter approach for induction motor broken rotor bars identification
Azouzi, K., Boudinar, A. H., Aimer, A. F., & Bendiabdellah, A. (2018) · Journal of Microwaves Optoelectronics and Electromagnetic Applications · doi:10.1590/2179-10742018v17i11136 · Cited by 6
Propositional logic concept for fault diagnosis in complex systems
Biçen, Y. (2020) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2020.01.011 · Cited by 6
Proposal of noninvasive failure diagnosis of electrical motor using googlenet
Tung, H. V., Khanh, N. V., & Ngon, N. C. (2021) · Technical Education Science/Giáo dục Kỹ thuật · doi:10.54644/jte.66.2021.1070 · Cited by 6
de Souza, R. P. P., Agulhari, C. M., Goedtel, A., Moríñigo-Sotelo, D., Duque-Pérez, Ó., & Fernandez-Cavero, V. (2025) · Control Engineering Practice · doi:10.1016/j.conengprac.2024.106233 · Cited by 5
Wodecki, J., Michalak, A., Hebda-Sobkowicz, J., Zimroz, R., Wyłomańska, A., Wolkiewicz, M., Szabat, K., Weisse, S., & Valire, J. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3595985 · Cited by 5
Enhancing non-stationary rotodynamic monitoring through current signature analysis
Cruz-Rangel, D., Ocampo-Martinez, C., & Díaz-Rozo, J. (2026) · Expert Systems with Applications · doi:10.1016/j.eswa.2026.131258 · Cited by 5
Industrial Motor Bearing Fault Detection Using Vibration Analysis
Misra, R., Shinghal, K., Saxena, A. K., & Agarwal, A. (2019) · Algorithms for intelligent systems · doi:10.1007/978-981-15-0633-8_86 · Cited by 5
MCRCNet: A Bearing Fault Diagnosis Method for Unknown Faults Based on Transfer Learning
Xu, G., Guo, R., Yin, Z., & Zhang, F. (2025) · Applied Sciences · doi:10.3390/app15020921 · Cited by 5
Wijaya, C., Liu, J.-Z., Wang, I.-J., King, J.-K., & Yang, C. (2025) · IEEE Access · doi:10.1109/access.2025.3580729 · Cited by 5
Industrial machinery diagnosis by means of normalized time-frequency maps
Picot, A., Zurita, D., Carino, J. A., Fournier, E., Régnier, J., & Ortega, J. A. (2015) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2015.7303684 · Cited by 5
Bruzzese, C., & Santini, E. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2016.7752071 · Cited by 5
Self-citationZimovets, V. I., Shamatrin, S. V., Olada, D. E., & Kalashnykova, N. I. (2020) · Journal of Engineering Sciences · doi:10.21272/jes.2020.7(1).e4 · Cited by 5
Bir Asenkron Motorun Mekanik Titreşim Sinyallerinin Ölçülerek Arıza Analizinin Yapılması
Çeven, S., & Bayır, R. (2020) · European Journal of Science and Technology · doi:10.31590/ejosat.780063 · Cited by 5
Fault Diagnosis and Condition Monitoring of Aircraft Electro-Mechanical Actuators
Mazzoleni, M., Rito, G. D., & Previdi, F. (2021) · Advances in industrial control · doi:10.1007/978-3-030-61799-8_4 · Cited by 5
Application of the System for Electrical Equipment Diagnostics and Its Analysis
Plotnikova, I. V., Sheveleva, E., & Нариманов, Р. К. (2022) · Studies in systems, decision and control · doi:10.1007/978-3-030-99060-2_11 · Cited by 5
Equipment for Monitoring Synchronous Generators Condition through External Magnetic Field Waveforms
Grillo, L. O. S., Wengerkievicz, C. A. C., dos Santos, H. F., Batistela, N. J., Kuo‐Peng, P., Sadowski, N., Matsuo, T. K., de Souza, C. L., de Freitas, L. M., & Nascimento, R. J. (2022) · Journal of Microwaves Optoelectronics and Electromagnetic Applications · doi:10.1590/2179-10742022v21i4268102 · Cited by 5
Gillis, T., Fagnard, J.-F., & Vanderbemden, P. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3305820 · Cited by 5
Gangsar, P., Singh, V., Chouksey, M., & Parey, A. (2023) · Mechanisms and machine science · doi:10.1007/978-981-99-4721-8_21 · Cited by 5
Machine Learning for Anomaly Detection in Induction Motors
Mari, S., Bucci, G., Ciancetta, F., Fiorucci, E., & Fioravanti, A. (2023) · IEEE International Conference on Metrology for eXtended Reality, Artificial Intelligence and Neural Engineering (MetroXRAINE) · doi:10.1109/metroxraine58569.2023.10405548 · Cited by 5
Detection of Broken Rotor Bars in Presence of Load Oscillations
Drobnič, K., Nemec, M., Lavrič, H., Ambrozic, V., & Fišer, R. (2025) · IEEE Access · doi:10.1109/access.2025.3546705 · Cited by 5
Bearing fault detection of electrical machines used in automotive applications
Szabó, L., Fodorean, D., & Vasilache, A. (2016) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2016.7732825 · Cited by 5
Ferraris, L., Franchini, F., & Pošković, E. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2933801 · Cited by 5
Murcia-Sepúlveda, N., Cruz‐Duarte, J. M., Martin-Diaz, I., García-Pérez, A., Rosales, J. J., Avina‐Cervantes, J. G., & Correa, R. (2019) · Energies · doi:10.3390/en12193736 · Cited by 5
Condition monitoring based on locating defects via strain gauge analysis
Valeev, A. R. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109587 · Cited by 5
Metadata
- Authors
- Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S.
- Affiliations
- Université de Picardie Jules Verne (FR)
- University of Bologna (IT)
- Sapienza University of Rome (IT)
- Michigan State University (US)
- University of Beira Interior (PT)
- Venue
- IEEE Industrial Electronics Magazine
- Published
- 2014-06
- Volume
- 8
- Issue
- 2
- Pages
- 31-42
- ISSN
- 1932-4529 (ISSN-L)
- OpenAlex
- W1983638645
- Cited by
- 602
- References
- 54
- Citations by year
- 2026: 23 · 2025: 39 · 2024: 37 · 2023: 42 · 2022: 64 · 2021: 54 · 2020: 57 · 2019: 79 · 2018: 54 · 2017: 71 · 2016: 48 · 2015: 26 · 2014: 7
- FWCI
- 56.41
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Industrial Electronics Magazine (publishedVersion)
- Consultation of the Doctoral Thesis Database (TESEO) (Ministerio de Educación, Cultura y Deporte) (submittedVersion, cc-by-nc-nd)
- IRIS Research product catalog (Sapienza University of Rome) (submittedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- fault diagnosis, rotating electrical machines, early fault detection, predictive maintenance, maintenance cost reduction, unplanned downtime, electric drives, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.