Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Open accessThe DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
The fault diagnosis of rotating electrical machines has received an intense amount of research interest during the last 30 years. Reducing maintenance costs and preventing unscheduled downtimes, which result in losses of production and financial incomes, are the priorities of electrical drives manufacturers and operators. In fact, both correct diagnosis and early detection of incipient faults lead to fast unscheduled maintenance and short downtime for the process under consideration. They also prevent the harmful and sometimes devastating consequences of faults and failures. This topic has become far more attractive and critical as the population of electric machines has greatly increased in recent years. The total number of operating electrical machines in the world was around 16.1 billion in 2011, with a growth rate of about 50% in the last five years [1].
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Signal processing in the frequency domain using FFT is established and still widely used as the basic diagnostic approach [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
In the citing paper
“The popularity of this method is related to its simplicity, low cost and online machine state monitoring capabilities [11].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [11]
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Self-citationA Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Prieto, M. D., Cirrincione, G., Espinosa, A. G., Ortega, J. A., & Henao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2219838 · Cited by 461
Self-citationDetection and location of interturn short circuits in the stator windings of operating motors
Penman, J., Sedding, H. G., Lloyd, B. A., & Fink, W. T. (1994) · IEEE Transactions on Energy Conversion · doi:10.1109/60.368345 · Cited by 394
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377 · cited 3×
“EncaaV [42] cPVPcP [43] ncaV [44] nrcE [45]”
BackgroundSelf-citationHenao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Self-citationOpen-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents
Sleszynski, W., Nieznanski, J., & Cichowski, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2023640 · Cited by 300
Research works printed but not linked: 4
- cardoso, 0, The Park's vector approach: A general tool for diagnostics of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1997), 261
- cabanas, 0, Experimental application of axial leakage flux to the detection of rotor asymmetries, mechanical anomalies and inter-turn short-circuits in working induction motors, Proc Int Conf Electric Machines (ICEM), 420
- 2000, IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery
- cardoso, 0, The Park's vector approach: New developments in on-line fault diagnosis of electrical machines, power electronics and adjustable speed drives, Proc IEEE Int Symp Diagnostics for Electrical Machines Power Electronics and Drives (SDEMPED'1999), 89
Cited by
Gangsar, P., & Tiwari, R. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106908 · Cited by 605
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
Self-citationA Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Caesarendra, W., & Tjahjowidodo, T. (2017) · Machines · doi:10.3390/machines5040021 · Cited by 427
Glowacz, A., Glowacz, W., Glowacz, Z., & Kozik, J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.036 · Cited by 374
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“The popularity of this method is related to its simplicity, low cost and online machine state monitoring capabilities [11].”
MethodCondition Monitoring and Fault Diagnosis of Induction Motors: A Review
Choudhary, A., Goyal, D., Shimi, S. L., & Akula, A. (2019) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-018-9286-z · Cited by 302
Frosini, L., Harlisca, C., & Szabo, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2361115 · Cited by 264
Bearing fault detection by one-dimensional convolutional neural networks
Eren, L. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/8617315 · Cited by 250
Diagnosis of the three-phase induction motor using thermal imaging
Glowacz, A., & Glowacz, Z. (2017) · Infrared Physics & Technology · doi:10.1016/j.infrared.2016.12.003 · Cited by 239
A Comprehensive Study on Shaft Voltages and Bearing Currents in Rotating Machines
Plazenet, T., Boileau, T., Caironi, C., & Nahid‐Mobarakeh, B. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2818663 · Cited by 222
Artificial Intelligence-Based Technique for Fault Detection and Diagnosis of EV Motors: A Review
Lang, W., Hu, Y., Gong, C., Zhang, X., Xu, H., & Deng, J. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3110318 · Cited by 220
Yang, B., Liu, R., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2662215 · Cited by 218
AlShorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., & AlShorman, A. (2020) · Shock and Vibration · doi:10.1155/2020/8843759 · Cited by 215
“However, this field still faces many challenges [35, 230, 231]. section summarizes the challenges and the future trends of AI methods in CM and FDD of rolling element bearings for IM [232–235”
BackgroundA New Feature Extraction Method Based on EEMD and Multi-Scale Fuzzy Entropy for Motor Bearing
Zhao, H., Sun, M., Deng, W., & Yang, X. (2016) · Entropy · doi:10.3390/e19010014 · Cited by 209
Recent Industrial Applications of Infrared Thermography: A Review
Alfredo Osornio-Rios, R., Antonino-Daviu, J. A., & de Jesus Romero-Troncoso, R. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2884738 · Cited by 206
Duan, F., Dai, L., Chang, W., Chen, Z., Zhu, C., & Li, W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497212 · Cited by 198
Advanced Induction Motor Rotor Fault Diagnosis Via Continuous and Discrete Time–Frequency Tools
Pons-Llinares, J., Antonino-Daviu, J. A., Riera-Guasp, M., Bin Lee, S., Kang, T.-J., & Yang, C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2355816 · Cited by 180
Self-citationData-Driven Fault Diagnosis for Electric Drives: A Review
Gonzalez-Jimenez, D., del Olmo, J., Poza, J., Garramiola, F., & Madina, P. (2021) · Sensors · doi:10.3390/s21124024 · Cited by 174
A Simple, Fast, and Robust Open-Phase Fault Detection Technique for Six-Phase Induction Motor Drives
Duran, M. J., González‐Prieto, I., Rios-Garcia, N., & Barrero, F. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2670924 · Cited by 169
Falekas, G., & Karlis, A. D. (2021) · Energies · doi:10.3390/en14185933 · Cited by 168
Gangsar, P., & Tiwari, R. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.03.016 · Cited by 166
Open-Switch Fault Detection in Five-Phase Induction Motor Drives Using Model Predictive Control
González‐Prieto, I., Duran, M. J., Rios-Garcia, N., Barrero, F., & Martín, C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2748052 · Cited by 158
Kumar, R., Andriollo, M., Cirrincione, G., Cirrincione, M., & Tortella, A. (2022) · Energies · doi:10.3390/en15238938 · Cited by 156
Bazan, G. H., Scalassara, P. R., Endo, W., Goedtel, A., Godoy, W. F., & Palácios, R. H. C. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.09.031 · Cited by 149
An Early Stage Interturn Fault Diagnosis of PMSMs by Using Negative-Sequence Components
Jeong, H., Moon, S., & Kim, S. W. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2677355 · Cited by 149
Multi-Scale Permutation Entropy Based on Improved LMD and HMM for Rolling Bearing Diagnosis
Gao, Y., Villecco, F., Li, M., & Song, W. (2017) · Entropy · doi:10.3390/e19040176 · Cited by 149
Review of Machine Learning Based Fault Detection for Centrifugal Pump Induction Motors
Sunal, C. E., Dyo, V., & Velisavljević, V. (2022) · IEEE Access · doi:10.1109/access.2022.3187718 · Cited by 144
Current-Based Open-Circuit Fault Diagnosis for PMSM Drives With Model Predictive Control
Huang, W., Du, J., Hua, W., Lu, W., Bi, K., Zhu, Y., & Fan, Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3061448 · Cited by 140
Magnetic Flux Analysis for the Condition Monitoring of Electric Machines: A Review
Zamudio-Ramírez, I., Osornio-Rios, R. A., Daviu, J. A. A., Razik, H., & Romero-Troncoso, R. D. J. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3070581 · Cited by 130
Merizalde, Y., Hernández-Callejo, L., & Duque-Pérez, Ó. (2017) · Energies · doi:10.3390/en10071056 · Cited by 127
Diagnosis of stator faults of the single-phase induction motor using acoustic signals
Glowacz, A., & Glowacz, Z. (2017) · Applied Acoustics · doi:10.1016/j.apacoust.2016.10.012 · Cited by 124
Ma, S., Chu, F., & Han, Q. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.02.055 · Cited by 124
Graph neural network-based fault diagnosis: a reviewPreprint
Chen, Z., Xu, J., Alippi, C., Ding, S. X., Shardt, Y. A. W., Peng, T., & Yang, C. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2111.08185 · Cited by 120
Hang, J., Wu, H., Zhang, J., Ding, S., Huang, Y., & Hua, W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3011450 · Cited by 117
Głowacz, A., & Głowacz, Z. (2016) · Measurement · doi:10.1016/j.measurement.2016.07.008 · Cited by 114
Du, B., Wu, S., Han, S., & Cui, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2496900 · Cited by 112
Thermal Imaging and Vibration-Based Multisensor Fault Detection for Rotating Machinery
Janssens, O., Loccufier, M., & Hoecke, S. V. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873175 · Cited by 111
Cost-Effective Three-Phase PMSM Drive Tolerant to Open-Phase Fault
Kontarcek, A., Bajec, P., Nemec, M., Ambrozic, V., & Nedeljkovic, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2437357 · Cited by 106
Reliability and Operation of High-Efficiency Induction Motors
Ferreira, F. J. T. E., Ge, B., & de Almeida, A. T. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2600677 · Cited by 104
An Ensemble Convolutional Neural Networks for Bearing Fault Diagnosis Using Multi-Sensor Data
Liu, Y., Yan, X., Zhang, C.-A., & Wen, L. (2019) · Sensors · doi:10.3390/s19235300 · Cited by 103
Verucchi, C., Bossio, J. M., Bossio, G. R., & Acosta, G. G. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.04.035 · Cited by 101
Deep convolutional neural network based on adaptive gradient optimizer for fault detection in SCIM
Kumar, P., & Hati, A. S. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.10.052 · Cited by 96
Irhoumah, M., Pusca, R., Lefèvre, É., Mercier, D., Romary, R., & Demian, C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745408 · Cited by 95
Self-citationPietrzak, P., Wolkiewicz, M., & Orłowska-Kowalska, T. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3189076 · Cited by 95
Liu, X., Miao, W., Xu, Q. C., Cao, L., Liu, C., & Pong, P. W. T. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2918018 · Cited by 94
Gangsar, P., & Tiwari, R. (2018) · Measurement · doi:10.1016/j.measurement.2018.12.011 · Cited by 93
Novel Three-Stage Feature Fusion Method of Multimodal Data for Bearing Fault Diagnosis
Wang, D., Li, Y., Jia, L., Song, Y., & Liu, Y. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3071232 · Cited by 93
Recent Progress in Self-Powered Wireless Sensors and Systems Based on TENG
Li, Y., Yu, J., Wei, Y., Wang, Y., Feng, Z., Cheng, L., Huo, Z., Lei, Y., & Sun, Q. (2023) · Sensors · doi:10.3390/s23031329 · Cited by 93
Zhang, X., Zhao, J., Fu, X., Lin, Y. H., Qi, Y., Zhou, H., & Zhang, C. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107209 · Cited by 91
A smart and intuitive machine condition monitoring in the Industry 4.0 scenario
Dinardo, G., Fabbiano, L., & Vacca, G. (2018) · Measurement · doi:10.1016/j.measurement.2018.05.041 · Cited by 91
Sapena-Bañó, Á., Burriel-Valencia, J., Pineda‐Sanchez, M., Puche‐Panadero, R., & Riera‐Guasp, M. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2016.2626008 · Cited by 86
Self-citationA Review of Techniques Used for Induction Machine Fault Modelling
Terron-Santiago, C., Martínez‐Román, J., Puche‐Panadero, R., & Sapena-Bañó, Á. (2021) · Sensors · doi:10.3390/s21144855 · Cited by 84
Advancements in Induction Motor Fault Diagnosis and Condition Monitoring: A Comprehensive Review
Hamani, K., Kuchař, M., Kubatko, M., & Kirschner, Š. (2025) · Sensors · doi:10.3390/s25195942 · Cited by 83
Review of Condition-Based Maintenance Strategies for Offshore Wind Energy
Kang, J., Sobral, J., & Soares, C. G. (2019) · Journal of Marine Science and Application · doi:10.1007/s11804-019-00080-y · Cited by 83
Condition-based maintenance methods for marine renewable energy
Mérigaud, A., & Ringwood, J. V. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.07.071 · Cited by 82
GMPSO-VMD Algorithm and Its Application to Rolling Bearing Fault Feature Extraction
Ding, J., Huang, L., Xiao, D., & Li, X. (2020) · Sensors · doi:10.3390/s20071946 · Cited by 81
Advanced Signal Processing Methods for Condition Monitoring
Jaroš, R., Byrtus, R., Dohnal, J., Danys, L., Baroš, J., Koziorek, J., Zmij, P., & Martínek, R. (2022) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-022-09834-4 · Cited by 81
Saucedo-Dorantes, J. J., Delgado-Prieto, M., Ortega-Redondo, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J. (2016) · Shock and Vibration · doi:10.1155/2016/5467643 · Cited by 80
“In many applications, induction motors are connected to gearboxes [7, 8], and it is important to identify faulty conditions at an early stage while these elements are under operation along with the related kinematic chain.”
BackgroundKhodja, M.-E.-A., Aimer, A. F., Boudinar, A. H., Benouzza, N., & Bendiabdellah, A. (2019) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-019-00096-y · Cited by 80
A Review of Intelligent Fault Diagnosis for High-Speed Trains: Qualitative Approaches
Cheng, C., Wang, J., Chen, H., Chen, Z., Luo, H., & Xie, P. (2020) · Entropy · doi:10.3390/e23010001 · Cited by 80
Combination of Noninvasive Approaches for General Assessment of Induction Motors
Picazo-Rodenas, M. J., Daviu, J. A. A., Climente-Alarcón, V., Royo, R., & Mota-Villar, A. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2382880 · Cited by 78
Han, Q., Ding, Z., Xu, X., Wang, T., & Chu, F. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.06.010 · Cited by 78
Securing Electric Vehicle Performance: Machine Learning-Driven Fault Detection and Classification
Khan, M. U. I., Pathan, M. I., Rahman, M. M., Islam, M. M., Chowdhury, M. A. R., Anower, M. S., Rana, M. M., Alam, M. S., Hasan, M., Sobuj, M. S. I., et al. (2024) · IEEE Access · doi:10.1109/access.2024.3400913 · Cited by 78
Reliable Detection of Rotor Bars Breakage in Induction Motors via MUSIC and ZSC
Moríñigo-Sotelo, D., Romero-Troncoso, R. D. J., Panagiotou, P. A., Daviu, J. A. A., & Gyftakis, K. N. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2764846 · Cited by 76
Tra, V., Kim, J., Khan, S. A., & Kim, J.-M. (2017) · Sensors · doi:10.3390/s17122834 · Cited by 76
Reliability and operation of high-efficiency induction motors
Ferreira, F. J. T. E., Ge, B., & de Almeida, A. T. (2015) · IEEE/IAS Industrial and Commercial Power Systems Technical Conference · doi:10.1109/icps.2015.7266412 · Cited by 75
Qin, A., Hu, Q., Lv, Y., & Zhang, Q. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2885377 · Cited by 74
Ruan, D., Chen, X., Gühmann, C., & Yan, J. (2023) · Lubricants · doi:10.3390/lubricants11020074 · Cited by 73
Pradhan, M. M. P. (2025) · American Journal of Scholarly Research and Innovation · doi:10.63125/j33gtf31 · Cited by 72
Dalvand, F., Kalantar, A., & Safizadeh, M. S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2464294 · Cited by 71
Comparative Experimental Investigation of the Broken Bar Fault Detectability in Induction Motors
Gyftakis, K. N., Daviu, J. A. A., Garcia-Hernandez, R., McCulloch, M. D., Howey, D. A., & Cardoso, A. J. M. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2015.2505663 · Cited by 71
Atta, M. E. E.-D., Ibrahim, D. K., & Gilany, M. I. (2022) · IEEE Access · doi:10.1109/access.2022.3200058 · Cited by 70
Induction Motor Bearing Fault Analysis Using a Root-MUSIC Method
Boudinar, A. H., Benouzza, N., Bendiabdellah, A., & Khodja, M.-E.-A. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2581143 · Cited by 70
Maintenance Models Applied to Wind Turbines. A Comprehensive Overview
Merizalde, Y., Hernández-Callejo, L., Duque-Pérez, Ó., & Alonso‐Gómez, V. (2019) · Energies · doi:10.3390/en12020225 · Cited by 70
Bruzzese, C. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2284554 · Cited by 69
Self-citationNovel Diagnostic Techniques for Rotating Electrical Machines—A Review
Frosini, L. (2020) · Energies · doi:10.3390/en13195066 · Cited by 67
“Insulation is one of the most fault-prone electrical machine components: for example, the proportion of stator winding insulation faults is between 21% and 40% of total faults in IMs, according to the type and dimension of the machine [8].”
BackgroundCondition Parameter Estimation for Photovoltaic Buck Converters Based on Adaptive Model Observers
Cen, Z., & Stewart, P. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2618320 · Cited by 67
Irhoumah, M., Pusca, R., Lefèvre, É., Mercier, D., & Romary, R. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2899560 · Cited by 67
Self-citationAlexakos, C. T., Karnavas, Y. L., Drakaki, M., & Tziafettas, I. A. (2021) · Machine Learning and Knowledge Extraction · doi:10.3390/make3010011 · Cited by 66
ARG-Mask RCNN: An Infrared Insulator Fault-Detection Network Based on Improved Mask RCNN
Ming, Z., Wang, J., & Li, B. (2022) · Sensors · doi:10.3390/s22134720 · Cited by 65
A Novel Weak Signal Detection Method via Chaotic Synchronization Using Chua's Circuit
Li, G., & Zhang, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2620103 · Cited by 64
Gyftakis, K. N., Cardoso, A. J. M., & Daviu, J. A. A. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.046 · Cited by 64
Efficiency Assessment of Induction Motors Operating Under Different Faulty Conditions
Garcia, M., Panagiotou, P. A., Daviu, J. A. A., & Gyftakis, K. N. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2885719 · Cited by 64
Skowron, M., Wolkiewicz, M., Orłowska-Kowalska, T., & Kowalski, C. T. (2019) · Applied Sciences · doi:10.3390/app9040616 · Cited by 64
A Normalized Frequency-Domain Energy Operator for Broken Rotor Bar Fault Diagnosis
Li, H., Feng, G., Zhen, D., Gu, F., & Ball, A. D. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3009011 · Cited by 63
Hajary, A., Kianinezhad, R., Seifossadat, S. G., Mortazavi, S. S., & Saffarian, A. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2901598 · Cited by 61
Wang, S., Selesnick, I., Cai, G., Ding, B., & Chen, X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.02.053 · Cited by 61
Shahriar, M. R., Borghesani, P., & Tan, A. C. C. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782240 · Cited by 60
Data-Driven Cyber-Attack Detection for PV Farms via Time-Frequency Domain Features
Guo, L., Zhang, J., Ye, J., Coshatt, S. J., & Song, W. (2021) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2021.3136559 · Cited by 59
Fault diagnosis for induction generator-based wind turbine using ensemble deep learning techniques
Attallah, O., Ibrahim, R. A., & Zakzouk, N. E. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.09.139 · Cited by 59
Classification of Faults in Multicore Cable via Time–Frequency Domain Reflectometry
Bang, S. S., & Shin, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2920606 · Cited by 59
Mueller, P. N., Woelfl, L., & Can, S. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106834 · Cited by 58
Ameid, T., Menacer, A., Talhaoui, H., & Harzelli, I. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0143-2 · Cited by 58
A Review of Modeling and Diagnostic Techniques for Eccentricity Fault in Electric Machines
Liu, Z., Zhang, P., He, S., & Huang, J. E. (2021) · Energies · doi:10.3390/en14144296 · Cited by 57
Gritli, Y., Bellini, A., Rossi, C., Casadei, D., Filippetti, F., & Capolino, G. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062337 · Cited by 57
Self-citationGarcia-Calva, T. A., Moríñigo-Sotelo, D., García-Pérez, A., Camarena‐Martinez, D., & Romero-Troncoso, R. D. J. (2019) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2019.2917405 · Cited by 57
Gear fault diagnosis using discrete wavelet transform and deep neural networks
Heydarzadeh, M., Kia, S. H., Nourani, M., Henao, H., & Capolino, G. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793549 · Cited by 56
Self-citationDiagnosis of Stator Faults Severity in Induction Motors Using Two Intelligent Approaches
Palácios, R. H. C., da Silva, I. N., Goedtel, A., Godoy, W. F., & Lopes, T. D. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2696978 · Cited by 56
Pietrzak, P., & Wolkiewicz, M. (2021) · Electronics · doi:10.3390/electronics10151786 · Cited by 54
Metadata
- Authors
- Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S.
- Affiliations
- Université de Picardie Jules Verne (FR)
- University of Bologna (IT)
- Sapienza University of Rome (IT)
- Michigan State University (US)
- University of Beira Interior (PT)
- Venue
- IEEE Industrial Electronics Magazine
- Published
- 2014-06
- Volume
- 8
- Issue
- 2
- Pages
- 31-42
- ISSN
- 1932-4529 (ISSN-L)
- OpenAlex
- W1983638645
- Cited by
- 602
- References
- 54
- Citations by year
- 2026: 23 · 2025: 39 · 2024: 37 · 2023: 42 · 2022: 64 · 2021: 54 · 2020: 57 · 2019: 79 · 2018: 54 · 2017: 71 · 2016: 48 · 2015: 26 · 2014: 7
- FWCI
- 56.41
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Industrial Electronics Magazine (publishedVersion)
- Consultation of the Doctoral Thesis Database (TESEO) (Ministerio de Educación, Cultura y Deporte) (submittedVersion, cc-by-nc-nd)
- IRIS Research product catalog (Sapienza University of Rome) (submittedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- fault diagnosis, rotating electrical machines, early fault detection, predictive maintenance, maintenance cost reduction, unplanned downtime, electric drives, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.