Power Cycling Reliability of Power Module: A Survey
Open accessThe DOI matches its Crossref record; 91 of the 94 references it cites were found in a registry or an index.
Abstract
Electronic devices using semiconductors such as insulated-gate bipolar transistors, metal-oxide-semiconductor field-effect transistors, and diodes are extensively used in electrical traction applications such as locomotive, elevators, subways, and cars. The long-term reliability of such power modules is then highly demanded, and their main reliability criterion is their power cycling capability. Thus, a power cycling test is the most important reliability test for power modules. This test consists in periodically applying a current to a device mounted onto a heat sink. This leads to power loss in the entire module and results in a rise in the semiconductor temperature. In this paper, the different kinds of semiconductors and power modules used for traction applications are described. Experimental and simulation methods employed for power cycling tests are presented. Modules' weak points and fatigue processes are pointed out. Then, a detailed statistical review of publications from 1994 to 2015 dealing with power cycling is presented. This review gives a clear overview of all studies dealing with power cycling that were carried out until now. It reveals the principal trends in power electronic devices and highlights the main reliability issues for which an important lack of knowledge remains.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 2×
“Bond wires are often reported as the weakest component of power modules, responsible for device failures [15], [16], [37].”
BackgroundSemiconductor Power Devices: Physics, Characteristics, Reliability
Lutz, J., Schlangenotto, H., Scheuermann, U., & De Doncker, R. (2011) · Springer eBooks · doi:10.1007/978-3-642-11125-9 · Cited by 706
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Fast power cycling test of IGBT modules in traction application
Held, M., Jacob, P., Nicoletti, G., Scacco, P., & Poech, M.-H. (2002) · Proceedings of Second International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1997.618742 · Cited by 585
(2008) · Cited by 578
Reliability of power cycling for igbt power semiconductor modules
Morozumi, A., Yamada, K., Miyasaka, T., Sumi, S., & Seki, Y. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.810661 · Cited by 256
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232
Power cycling induced failure mechanisms in solder layers
Herrmann, T., Feller, M., Lutz, J., Bayerer, R., & Licht, T. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417702 · Cited by 116
Hamidi, A., Beck, N., Thomas, K., & Herr, E. (1999) · Microelectronics Reliability · doi:10.1016/s0026-2714(99)00164-x · Cited by 106
Research works printed but not linked: 17
- liew, 0, Electromigration interconnect lifetime under AC and pulsed DC stress, Proc IEEE 27th Int Rel Symp, 215
- 2010, Halbleiterbauelemente—Mechanische und klimatische Prüfverfahren—Teil 34 Lastwechselprüfung
- 2013, Environmental test methods for semiconductor devices Part 1 Test methods 1000 through 1999
- 2007, Power Cycling
- khong, 2007, Fiabilité Prédictive de Composants de Puissance Soumis a des Tests de Fatigue Accélérée
- scheuermann, 0, Power cycling lifetime of advanced power modules for different temperature swings, Proc PCIM Eur, 59
- ong, 0, Heavy Al ribbon interconnect: An alternative solution for hybrid power packaging, Proc IMAPS Int J Microcircuits Electron Packag, 1
- guth, 0, New assembly and interconnects beyond sintering methods, Proc PCIM, 1
- stupar, 0, Lifetime model for solder layers, Proc ECPE Workshop, 1
- böttcher, 0, Laboratory setup for power cycling of IGBT modules with monitoring of ON-state voltage and thermal resistance for state of aging detection, Proc Int Exhib Conf Power Electron Intell Motion Renew Energy Manage PCIM, 1
- hutzler, 2014, Power Cycling Community 1995–2014, Bodo's Power Syst, 2014, 78
- thoben, 0, Modelling and experimental investigations on degradation of microcomponents in power cycling, Proc Ansys Paper, 1
- farassat, 2007, More performance at lower cost—Heavy aluminium ribbon bonding, 1
- 2014, Data sheet for power discrete device SO8-FL
- benzler, 0, New module generation for higher lifetime, Proc Bodo's Power Syst, 30
- jacques, 2010, Etude de la Fatigue Thermomécanique des Composants de Puissance de Type TRIAC Soumis a des Cycles Actifs de Températures
- bouarroudj-berkani, 2008, Etude de la thermo-mécanique de modules electroniques de puissance en ambiance de températures elevées pour des applications de traction de véhicules electriques et hybrides
Cited by
Items 101–200 of 239
Lai, W., Xing, Z., Yao, R., Ding, X., Shi, J., Min, Y., Li, H., Yang, C. C., Han, W., & Yuan, Y. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3397779 · Cited by 10
“When the thermal resistance R th for one chip in the module increases by 20% [20], [21], [22], the chip is considered to be a failure.”
BackgroundForndran, F., Heilmann, J., Metzler, M., Leicht, M., & Wunderle, B. (2021) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime52062.2021.9410830 · Cited by 9
“Usually, the reliability is tested using accelerated fatigue tests such as active thermal cycling (aTC) or power cycling [3] and passive thermal cycling (pTC) [4].”
BackgroundAnalysis of thermal cycling effects in power devices under non-constant cumulative stress
Vaccaro, A., & Magnone, P. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773598 · Cited by 10
Zhang, X., Zhao, X., Li, W., Wang, Z., Liao, A., Song, Y., Wang, Y., Wang, Y., & Zhang, L. (2023) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2023.3243737 · Cited by 9
“from 25 C to 150 C correspondingly [29].”
BackgroundSun, Y., Ma, K., Song, Y., Zi, T., Liu, X., Feng, Z., Zhou, Y., & Liu, S. (2023) · Micromachines · doi:10.3390/mi14091695 · Cited by 8
gEOL: A Gradient-Based End-of-Life Criterion for Power Semiconductor Modules
Zhang, Y., Zhang, Y., & Wang, H. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3339342 · Cited by 8
“The case study presented in this letter focuses on top-side contacting degradation (bond wires lift-off and metallization layer reconstruction), which is one of the common failure mechanisms [3].”
BackgroundOh, J., Kim, I., Hwang, I., Choi, B., & Kim, N. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3472910 · Cited by 9
“In academia, thermal resistance ( R th ) and V ce , sat are the two most frequently used fault precursors for power cycling IGBT modules [17].”
BackgroundDeng, E., & Lutz, J. (2020) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd46842.2020.9170083 · Cited by 8
“The PCT (Power Cycling Test) is defined as the most important test for the reliability evaluation of power electronics with repetitive junction temperature swings [1].”
BackgroundDvorzak, M., Magnien, J., Kleb, U., Kraker, E., & Mücke, M. (2022) · Applied Sciences · doi:10.3390/app121910063 · Cited by 8
Smart SiC MOSFET accelerated lifetime testing
Baker, N., & Iannuzzo, F. (2018) · Microelectronics Reliability · doi:10.1016/j.microrel.2018.07.067 · Cited by 9
Second life potential of electric vehicle power electronics for more circular economies
Alatise, O. M., Wu, R., Deb, A., & Gonzalez, J. A. O. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.115238 · Cited by 7
Kilian, B., Gleichauf, J., Maniar, Y., Wittler, O., & Schneider‐Ramelow, M. (2024) · Microelectronics Reliability · doi:10.1016/j.microrel.2024.115388 · Cited by 10
Sun, Y., Zhang, H., Chen, R., Li, D., Cheng, X., Liu, J., & Gao, J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3395426 · Cited by 7
“However, the reliability of high-power thyristors is significantly influenced by temperature [5], and thermal fatigue is the most common failure mechanism of high-power thyristors [6].”
BackgroundSun, P. F., Liang, Y., Wang, L., Wang, Y., Zou, M., & Zeng, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3265419 · Cited by 7
“Besides, the power module needs to be tested by comprehensive experiments to evaluate its reliability before being applied to the field application [10], [11].”
Insulated Gate Bipolar Transistor Reliability Study Based on Electro-Thermal Coupling Simulation
Yang, X., Zhai, X., Long, S., Li, M., Dong, H., & He, Y. (2023) · Electronics · doi:10.3390/electronics12092116 · Cited by 7
Sitta, A., Mauromicale, G., Sequenzia, G., Messina, A. A., Renna, M., & Calabretta, M. (2021) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime52062.2021.9410870 · Cited by 7
“An unified mode which can account at the same time creep and plasticity seems to be the best approach for solder mechanical modeling [9].”
MethodImplications of short-circuit events on power cycling of 1.2-kV/20-A SiC MOSFET power modules
Du, H., Ceccarelli, L., Iannuzzo, F., & Reigosa, P. D. (2019) · Microelectronics Reliability · doi:10.1016/j.microrel.2019.06.065 · Cited by 6
“By means of accelerated power cycling test, the wear-out reliability issues can be investigated within very short time [1].”
BackgroundIn Situ Degradation Monitoring Methods during Lifetime Testing of Power Electronic Modules
Schiffmacher, A., Strahringer, D., Malasani, S., Wilde, J., Kempiak, C., & Lindemann, A. (2021) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc32696.2021.00149 · Cited by 6
Evaluating Cu Printed Interconnects “Sinterconnects” versus Wire Bonds for Switching Converters
Hasan, M. N., Polom, T. A., Holzmann, D., Malagò, P., Binder, A., & Roshanghias, A. (2022) · Electronics · doi:10.3390/electronics11091373 · Cited by 6
Qin, F., Zhao, J., An, T., Dai, J., Dai, Y., & Chen, P. (2020) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2020.3021399 · Cited by 6
“The Al metallization in an IGBT module offers many advantages in terms of high ductility and strong bonding properties [2], and it is mainly used to establish electrical interconnections between the chips”
GaN Power Devices for Electrified Transportation: Status, Challenges, and Perspectives
Zhang, H., Huang, Y., Cui, H., Yang, X., Yang, Z., Guo, J., Jin, H., Li, D., Zhang, Y., Yang, Q., et al. (2026) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2026.3656259 · Cited by 6
“AQG 324 further strengthens thermal-stress evaluation by introducing power cycling (PC) to capture bondwire lifto ff , solder fatigue, and other failures [46].”
Degradation mechanism analysis for SiC power MOSFETs under repetitive power cycling stress
Rao, Y., Chen, Y., He, Z., Chen, Y., Liu, C., Xu, X., Liu, Y., & Lu, G. (2021) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac37dd · Cited by 6
A novel integrated approach to optimize copper wire bonding processes and manufacturing
Calabretta, M., & Sitta, A. (2022) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-022-00844-x · Cited by 5
“Therefore, wire bonding is often the weakest part of such classes of power devices, for example the power modules [3].”
BackgroundLiang, N., Zhang, Z., Gou, Y., Liu, C., Yang, Z., Chen, J., Zhuo, F., & Wang, F. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507978 · Cited by 5
“Under thermal variations, the CTE mismatch leads to incompatible thermal strains along materials interfaces and initiates delamination [16], therefore interfacial delamination is the other major reliability issue.”
BackgroundTian, J., Ma, C., Duan, Q., Zhang, Z., Wang, F., Zhuo, F., & Yi, H. (2019) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2019.8922381 · Cited by 5
“Lightning over-voltage is brought by thunder climate change and the over-voltage distribution inside the converter valve and protecting circuit [5].”
BackgroundStella, F., Pellegrino, G., & Armando, E. G. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124302 · Cited by 5
“It is well known from the literature that with the aging of the component the component increases [18] and [19].”
BackgroundKumar, S., Sarita, K., Saket, R. K., Dheer, D. K., Bansal, R. C., & Mekhilef, S. (2021) · International Transactions on Electrical Energy Systems · doi:10.1002/2050-7038.12952 · Cited by 8
Power cycling and temperature endurance test of a GaN switching cell with substrate integrated chips
Dechant, E., Seliger, N., & Kennel, R. M. (2019) · Microelectronics Reliability · doi:10.1016/j.microrel.2019.06.064 · Cited by 5
Heat Spreading and Heat Removal Needs of a Novel Power Electronics Package with Integrated Cooling
Muslu, A. M., Wong, R., Smet, V., & Joshi, Y. K. (2021) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm51669.2021.9503214 · Cited by 6
“Failure modes associated with contact stress, substrate cracking, and wire bond breakage are commonly observed in standard packages [1], [2], [3].”
BackgroundLan, D., Li, G., Zeng, Q. H., Yi, G., Ding, S., Qiao, L., Gao, F., & Li, S. (2026) · Chip · doi:10.1016/j.chip.2025.100188 · Cited by 7
Mauromicale, G., Calabretta, M., Scarcella, G., Scelba, G., & Sitta, A. (2022) · Journal of Electronic Packaging · doi:10.1115/1.4056413 · Cited by 6
Zhao, S., An, T., & Qin, F. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3562891 · Cited by 5
Power Density as the Key Enabler for Electrified Mobility
Alleyne, A. G. (2018) · Polytechnica · doi:10.1007/s41050-018-0002-4 · Cited by 4
“Over time, and if sufficiently large, this stress leads to failure just like any other mechanical stress cycling phenomenon (Khasaka et al., 2015) (Durand et al., 2016).”
BackgroundSoldati, A., Dalboni, M., Menozzi, R., & Concari, C. (2021) · Electronics · doi:10.3390/electronics10222745 · Cited by 6
Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronics
Gschwandl, M., Friedrich, B., Pfost, M., Antretter, T., Fuchs, P., Mitev, I., Tao, Q., & Schingale, A. (2022) · Microelectronics Reliability · doi:10.1016/j.microrel.2022.114537 · Cited by 4
Forndran, F., Heilmann, J., Metzler, M., Leicht, M., & Wunderle, B. (2021) · International Workshop on Thermal Investigations of ICs and Systems · doi:10.1109/therminic52472.2021.9626522 · Cited by 4
Thermal simulation of a 7kW interleaved module for fast automotive charger
Anoldo, L., Piccione, G. G., Mauromicale, G., Sitta, A., Fazio, E., Calabretta, M., Lionetto, A., Messina, A. A., Guardo, M. D., & Patanè, S. (2021) · IEEE International Conference on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe) · doi:10.1109/eeeic/icpseurope51590.2021.9584683 · Cited by 4
Large-area sintering of nano-copper for power module packaging and thermal-shock reliability
Zhu, R., Wang, Y., Jia, Q., Gao, X., Liu, R., dan, L., Zou, G., & Guo, F. (2025) · Applied Materials Today · doi:10.1016/j.apmt.2025.103065 · Cited by 8
Soldati, A., Menozzi, R., & Concari, C. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236131 · Cited by 3
“Reliability and prognostics can be promoted by knowledge of the junction temperature, which is recognized as an important stressor for the device assembly, especially when in thermal cycling [2].”
BackgroundQCM-Enabled SiC Three-Phase Traction Inverter
Shen, Y., Jiang, Y., Shillaber, L., Zhao, H. L., & Long, T. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595990 · Cited by 3
Reliability Prediction Platform of SiC Half Bridge Power Module
Syu, J.-Y., Huang, Y. C., Liu, Y. C., Chiu, P. K., Kao, K., & Chang, T. (2023) · International Conference on Electronics Packaging (ICEP) · doi:10.23919/icep58572.2023.10129725 · Cited by 3
“In addition, failure locations often occur at weaker interfaces, such as internal bonding wires and die-attached solder, which reduce thermal and electric performance [3].”
BackgroundComparative study of lead-free alloys submitted to thermomechanical ageing
Friaa, H., Guédon-Gracia, A., Frémont, H., Raphael, R., & Rocheron, L. (2024) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime60745.2024.10491424 · Cited by 3
“On the other hand, viscoplastic is determined by plastic deformations and consolidating creep [17] [18].”
BackgroundFatigue behavior of aluminum and copper metallization for SiC during APC
Losbichler, D., Klingler, M., Orso, S., & Wunderle, B. (2024) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime60745.2024.10491567 · Cited by 3
“Active power cycling tests are known as standard test for power modules to test thermomechanical fatigue [14], [15].”
BackgroundSelf-citationYang, J., Wang, X., Zhang, S., & Yan, H. (2024) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec60922.2024.10583516 · Cited by 3
Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics
Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P., Mitev, I., Tao, Q., & Schingale, A. (2021) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime52062.2021.9410862 · Cited by 3
“To validate the simulation results a PTC test [9]– [11] was conducted.”
MethodAlvi, M. H., Sheng, M., Lorenz, R. D., & Jahns, T. M. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124383 · Cited by 3
“The thermo-mechanical stress associated with bondwires and double-sided cooling is driving a shift to ribbon interconnects and leadframes, both of which are ultrasonically welded [18][19] [20].”
BackgroundState-of-the-art of Power Cycling Lifetime Models for Power Electronics
Wang, W., Ren, B., Pan, M., Zhou, Y., Deng, E., & Huang, Y. (2025) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2024.000095 · Cited by 3
Long, H., Chen, Y., Hou, B., & Zhou, C. (2024) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-beijing63284.2024.10874635 · Cited by 2
Zöllner, N., Schilling, O., Übelacker, D., Heise, T., & Eckel, H.-G. (2025) · Microelectronics Reliability · doi:10.1016/j.microrel.2025.115665 · Cited by 2
Abbas, W., Lu, C. B., Hou, Y. K., Xia, Q., Khan, G. A., Lee, H. H., & Loo, K. H. (2025) · Microelectronics Reliability · doi:10.1016/j.microrel.2025.115949 · Cited by 2
Zhu, M., Wang, L., Yang, F., Pei, Y., Ma, Z., & Liu, Y. (2026) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2026.3665508 · Cited by 2
Kegley, L. E., Foster, T., Seal, S., Shaw, R., McPherson, B. R., Passmore, B., Schupbach, M., & McNutt, T. R. (2019) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp.2019.8799100 · Cited by 2
“Based on the fixed parameters used within this test methodology, ∆Tj and Tjmax increase above the initially established operating point as the thermal stackup within the DUT begins to degrade – therefore, the test methodology herein is considered to be “the method closest to application and the most severe one” [9].”
BackgroundMethodInfluentialReliability Prediction Of An Unmanned Ground Vehicular Computer Based Parts Count Method
Fu, L., & Liu, P. (2019) · IEEE International Conference on Unmanned Systems (ICUS) · doi:10.1109/icus48101.2019.8996034 · Cited by 2
Felke, F., Groth, A., Hempel, M., Czerny, B., Khatibi, G., Döhler, T., & Geißler, U. (2024) · Microelectronics Reliability · doi:10.1016/j.microrel.2024.115337 · Cited by 2
“Heavy wire bonds of high purity Al, Al alloys and recently Cu are broadly used for interconnection in power electronic modules [1 – 3].”
BackgroundA Dynamic Current Sharing Method using Novel Clip Considering Mutual Inductance Coupling
Zheng, Z., Lv, J., Yan, Y., Liu, B., Zhang, Y., Ren, L., Liu, J., Chen, C., Kang, Y., Zhang, X., et al. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977168 · Cited by 2
“Additionally, the high operating temperature of SiC devices increases the risk of bonding wire failure [15].”
SiC MOSFET Chip Embedded Switching-Cell for Multilevel Converters
Raya, M., Solà, E., Vellvehi, M., Perpiñà, X., Lasserre, P., Busquets‐Monge, S., & Jordà, X. (2025) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.23919/ispsd62843.2025.11118194 · Cited by 2
“For instance, bond wires, reduce the reliability [1] and add a significant parasitic inductance [2] [3], increasing switching losses and limiting the maximum switching frequency.”
Modulation Strategy with a Minimal Number of Commutations for a Five-Level H-Bridge NPC Inverter
Becker, F., Jamshidpour, E., Poure, P., & Saadate, S. (2019) · Electronics · doi:10.3390/electronics8040454 · Cited by 2
“According to surveys [22,23], one of the semiconductor aging processes is the accumulation of electrical switching cycles (∆V and ∆i cycles) that cause metallurgical defects on the semiconductor die and change the electrical characteristics as well [23].”
BackgroundEffect of power module layer thickness on reliability
Zhao, Y., Liu, Z., Wang, Z., Li, G., & Ji, B. (2022) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec54735.2022.9846537 · Cited by 2
Numerical simulation of thermal-mechanical of IGBT Al metalization layer under power cycling
Zheng, X., An, T., Qin, F., Gong, Y., Dai, Y., & Chen, P. (2022) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept56209.2022.9872747 · Cited by 2
“Al metallization layer is a thin film material sputtered on the surface of IGBT chip [2], which is mainly used to connect the emitter on the surface of IGBT chip and realize the bonding between Al lead and chip [3].”
BackgroundCalabretta, M., Sitta, A., Messina, A. A., Oliveri, S. M., & Sequenzia, G. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-15928-2_99 · Cited by 2
Finite Elements Analysis of LED's Solder Joints During Power Thermal Cycling
Maarouf, K., Roucoules, C., & Klöcker, H. (2022) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc55720.2022.9939493 · Cited by 2
“The researches dedicated to solder joints failures during Power thermal cycling in LED modules are summarized in [8].”
BackgroundForndran, F., Heilmann, J., Metzler, M., Leicht, M., & Wunderle, B. (2022) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc55720.2022.9939558 · Cited by 2
“Widely-used accelerated stress tests for automotive power electronics are active thermal cycling and passive thermal cycling [2], [3].”
BackgroundGradient-based End-of-life Criterion of Power Semiconductor Modules
Zhang, Y., Zhang, Y., Yao, B., Zhao, S., & Wang, H. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131296 · Cited by 3
“As reported in [4], the selected EOL criterion in most of the analyzed 70 publications are consistent with the recommendations by [7].”
ResultAdvanced Method of Pure Solder Layer Thermal Resistance Measurement in Power Cycling
Liu, J., Zhao, Y., Deng, E., Pan, M., & Huang, Y. (2023) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec58067.2023.10166397 · Cited by 2
Active Power Cycling of SiC Modules Extended by Long-Term Monitoring of After Test
Bąba, S., Palesa, G., Wisniewski, J., Manka, F., & Gierałtowski, A. (2024) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe-powereng60842.2024.10604341 · Cited by 2
“• On-time ( T ON ) and Off-time ( T OFF ) were adjusted to mimic real-life operating conditions, which limits possibility to compare results with test performed in accordance to standards (e.g. [ 4], [5]) [6].”
MethodThermal Modeling and Degradation Profiling of E-Mode GaN HEMTs for Aging Characterization
Sayed, H., & Krishnamoorthy, H. S. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3481056 · Cited by 4
“This results in solder joint cracks and wire bond lift-offs, with the degradation observable through changes in on-state resistance and thermal resistance, as noted in references [7] and [31], [32], [33], [34], [35].”
BackgroundPascal, Y. (2019) · theses.fr (ABES) · doi:10.70675/3ac79b20z613bz47a2zb8aazeac7aed49765 · Cited by 3
Ren, H., Zhao, S., Jian, M., Wang, W., Yu, W., Wang, F., Han, Z., Li, Z., Li, Q., & Wang, J. (2024) · Microelectronics Reliability · doi:10.1016/j.microrel.2024.115527 · Cited by 2
Wu, P., Fan, Y., Mei, X., Qian, H., & Wang, L. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3544806 · Cited by 5
Xiao, S., Liu, Y., Li, L., Lin, F., & Miao, Y. (2025) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2025.3565618 · Cited by 1
“This process results in thermo-mechanical fatigue failure [6], [7].”
Yan, Y., Xie, L., Deng, E., Wang, W., He, Q., Sun, H., Pan, M., & Huang, Y. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3618687 · Cited by 1
“Power cycling test (PCT), which is one of the most important reliability tests, is widely applied in the reliability evaluation of power electronics of various rated voltage and current levels [2], [3].”
Rana, D., Khadka, P., Qiu, T., & Zhang, Z. (2026) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec51134.2026.11516770 · Cited by 1
Thermal analysis of IGBT by isogeometric boundary element method
Guo, Y., Yu, H., Gong, Y., & Qin, F. (2020) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept50128.2020.9202534 · Cited by 1
“INTRODUCTION Insulated gate bipolar transistor (IGBT) is widely applied in many fields [1].”
BackgroundAlvi, M. H., Sheng, M., Lorenz, R. D., & Jahns, T. M. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235335 · Cited by 1
“Generally, the leadframe interconnects also benefit from having a higher reliability and thermal performance than bondwires [12].”
BackgroundAccelerated Ageing Test and Lifetime Prediction of MOSFETs
Maxa, J., & Nowottnick, M. (2021) · European Microelectronics and Packaging Conference · doi:10.23919/empc53418.2021.9584958 · Cited by 1
Numerical Study on Semi-elliptical Crack in Heavy Aluminum Bonding Wires for IGBT Module
Liu, X., Huang, Q., Zhu, W., & Wang, L. (2022) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc56328.2022.10013213 · Cited by 1
“φ − = (1) % & ' ( " ' ) ' )) ' ' $*(+, ' ' $ *(, ' ' $ % ,-*-.”
BackgroundA new SiC power module assembly based on silver sintering bonding
Wang, L., Lei, Z., Liang, R., Rietveld, G., & Hueting, R. J. E. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264386 · Cited by 1
“STPak SiC MOSFETs [10] comprise an advanced copper clip topside interconnection technology which can significantly reduce the electrical and thermal resistance and package inductance, and improve the current distribution in the SiC chips [11].”
BackgroundKuang, K., Lan, Y., & Zhou, Z. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10860930 · Cited by 1
Lifespan Dependence of Power Converters in Wind Energy Systems
Parra, M., Reusser, C. A., Kouro, S., & Alcaide, A. M. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10860952 · Cited by 1
Ageing Mitigation Control Method for Power Devices in Multilevel Inverters in Standalone PV Systems
Aly, M., Ahmed, E. M., & Shoyama, M. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557707 · Cited by 1
“Power cycling tests show that alleviating thermal stresses from power devices can effectively improve the reliability and extend the lifetime of MIs [11]–[13].”
BackgroundMechanical Characterization of Power Electronics Solder Materials
Calabretta, M., Sitta, A., Messina, A. A., Oliveri, S. M., & Sequenzia, G. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-91234-5_72 · Cited by 1
A measurement structure for in-situ electrical monitoring of cyclic delamination
Moser, S. J., Tscharnuter, D., Nelhiebel, M., Reisinger, M., Zechner, J., & Cordill, M. J. (2022) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2022.128715 · Cited by 1
Chen, Y., Mei, Y., Ning, P., & Lu, G. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3278453 · Cited by 2
“The thermal resistance degradation was mainly attributed to the cyclic variation of temperatures and the CTE mismatch between the interconnections with the other components [9].”
BackgroundAnalysis of Igbt Wire Bonds Failure Using Extended Finite Element MethodPreprint
Nwanoro, K. C., Lu, H., Yin, C., & Bailey, C. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4108224 · Cited by 1
Power Integrity Design of Distributed Power System for UGV Computer
Fu, L., Liu, P., & Zhong, S. (2019) · IEEE International Conference on Distributed Computing Systems (ICDCS) · doi:10.1109/icdcs.2019.00142
“At the same time, the power system of the new UGV computer is facing stringent requirements such as higher power supply, lower voltage ripple and higher reliability [6, 7, 8].”
BackgroundStudy on Lifetime Model of Power Devices Based on Junction Temperature
Chen, Y., Zhang, P., Hou, B., & Huang, H. (2019) · International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering · doi:10.1109/qr2mse46217.2019.9021225
“Power cycling [11-14] is divided into two groups, each group of 14 samples.”
BackgroundLifetime Prediction Model of IGBT Modules in EMU
Zhu, B., Wang, L., Zhang, L., Li, M., & Wang, Y. (2020) · Lecture notes in electrical engineering · doi:10.1007/978-981-15-2862-0_57
Fracture Toughness Characterization of Copper-Resin Interface in Power Electronics Application
Calabretta, M., Sitta, A., Oliveri, S. M., & Sequenzia, G. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-91234-5_55
Jian, L. (2022) · Journal of Sensors · doi:10.1155/2022/4909942 · Cited by 4
“Aiming at high-precision picking and unloading operations, ABB currently launches the IRB360 FlexPicker TM second-generation triangular robot solution [25].”
BackgroundKaboli, S., Peyghami, S., & Blaabjerg, F. (2022) · Wiley eBooks · doi:10.1002/9781119772217.ch7
Lu, Z., & Iannuzzo, F. (2023) · Microelectronics Reliability · doi:10.1016/j.microrel.2023.115138 · Cited by 1
Reliability of WBG, results of a Pre-Scoping Study
Zhang, K., Iannuzzo, F., & Christiansen, C. H. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264334
“Indicators, which are external electrical parameters reflecting internal failure modes, are utilized to determine the number of cycles to failure in Accelerated Life Tests (ALTs) when the indicator values meet the defined failure criteria [3].”
MethodReliability Analysis of Power Integrated Circuits Using Finite Element Method with Hybrid Mesh
Zhang, F., Feng, M.-Z., Zhou, J.-H., Li, B.-H., Pu, B., & Chu, X. (2023) · IEEE International Symposium on Electromagnetic Compatibility · doi:10.1109/isemc58300.2023.10370630
Experimental Reliability Assessment of ACEPACK SMIT Power Module
Amoroso, D. M., Schifano, B., Calabretta, M., Mauromicale, G., & Sequenzia, G. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-52075-4_49
Zhang, Y., Zhang, Y., Yao, B., & Wang, H. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509199
“Over the past two decades, a variety of studies have focused on this topic, employing the power cycling test as an effective tool [5].”
BackgroundOnline Condition Monitoring Methods of Inverter IGBT Based on Output Voltage
Wang, Z., Ye, Z., Chen, C., & Zhuo, B. (2023) · IEEE Conference on Energy Internet and Energy System Integration (EI2) · doi:10.1109/ei259745.2023.10512870
Cost-Effective Test Bench for Accelerated Thermal Cycling of Cryogenically Cooled Power Electronics
Ostapchuk, M. A., Shishov, D., & Zanegin, S. Y. (2024) · International Siberian workshops and tutorials on electron devices and materials · doi:10.1109/edm61683.2024.10615012
Zhao, S., Wang, Q., An, T., & Qin, F. (2024) · IEEE Access · doi:10.1109/access.2024.3519663 · Cited by 1
“An insulated gate bipolar transistor (IGBT) is a core component in energy conversion and transmission devices and is widely used in the aerospace industry, electric vehicles and other fields [1], [2].”
Multi-Chip Temperature Imbalance of SiC MOSFETs in MOSFET vs. Body-Diode Conduction
Baker, N., Iannuzzo, F., & Bęczkowski, S. (2025) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp61784.2025.10971548 · Cited by 1
Metadata
- Authors
- Durand, C., Klingler, M., Coutellier, D., & Naceur, H.
- Affiliations
- Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielles et Humaines (FR)
- Robert Bosch (Germany) (DE)
- Centre National de la Recherche Scientifique (FR)
- Venue
- IEEE Transactions on Device and Materials Reliability
- Published
- 2016-03
- Volume
- 16
- Issue
- 1
- Pages
- 80-97
- ISSN
- 1530-4388 (ISSN-L)
- 1558-2574
- OpenAlex
- W2294980933
- Cited by
- 239
- References
- 94
- Citations by year
- 2026: 26 · 2025: 29 · 2024: 24 · 2023: 29 · 2022: 26 · 2021: 29 · 2020: 19 · 2019: 25 · 2018: 17 · 2017: 12 · 2016: 3
- FWCI
- 8.76
- Type
- journal article
- Language
- en
- Open access
- green
- uphf.hal.science
- Locations
- IEEE Transactions on Device and Materials Reliability (publishedVersion)
- HAL (submittedVersion, other-oa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- power cycling reliability, power modules, power devices, traction applications, IGBT, metal-oxide-semiconductor field-effect transistors, power cycling test, fatigue process, heat sinks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.