Power Cycling Reliability of Power Module: A Survey
Open accessThe DOI matches its Crossref record; 91 of the 94 references it cites were found in a registry or an index.
Abstract
Electronic devices using semiconductors such as insulated-gate bipolar transistors, metal-oxide-semiconductor field-effect transistors, and diodes are extensively used in electrical traction applications such as locomotive, elevators, subways, and cars. The long-term reliability of such power modules is then highly demanded, and their main reliability criterion is their power cycling capability. Thus, a power cycling test is the most important reliability test for power modules. This test consists in periodically applying a current to a device mounted onto a heat sink. This leads to power loss in the entire module and results in a rise in the semiconductor temperature. In this paper, the different kinds of semiconductors and power modules used for traction applications are described. Experimental and simulation methods employed for power cycling tests are presented. Modules' weak points and fatigue processes are pointed out. Then, a detailed statistical review of publications from 1994 to 2015 dealing with power cycling is presented. This review gives a clear overview of all studies dealing with power cycling that were carried out until now. It reveals the principal trends in power electronic devices and highlights the main reliability issues for which an important lack of knowledge remains.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 2×
“Bond wires are often reported as the weakest component of power modules, responsible for device failures [15], [16], [37].”
BackgroundSemiconductor Power Devices: Physics, Characteristics, Reliability
Lutz, J., Schlangenotto, H., Scheuermann, U., & De Doncker, R. (2011) · Springer eBooks · doi:10.1007/978-3-642-11125-9 · Cited by 706
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Fast power cycling test of IGBT modules in traction application
Held, M., Jacob, P., Nicoletti, G., Scacco, P., & Poech, M.-H. (2002) · Proceedings of Second International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1997.618742 · Cited by 585
(2008) · Cited by 578
Reliability of power cycling for igbt power semiconductor modules
Morozumi, A., Yamada, K., Miyasaka, T., Sumi, S., & Seki, Y. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.810661 · Cited by 256
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232
Power cycling induced failure mechanisms in solder layers
Herrmann, T., Feller, M., Lutz, J., Bayerer, R., & Licht, T. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417702 · Cited by 116
Hamidi, A., Beck, N., Thomas, K., & Herr, E. (1999) · Microelectronics Reliability · doi:10.1016/s0026-2714(99)00164-x · Cited by 106
Research works printed but not linked: 17
- liew, 0, Electromigration interconnect lifetime under AC and pulsed DC stress, Proc IEEE 27th Int Rel Symp, 215
- 2010, Halbleiterbauelemente—Mechanische und klimatische Prüfverfahren—Teil 34 Lastwechselprüfung
- 2013, Environmental test methods for semiconductor devices Part 1 Test methods 1000 through 1999
- 2007, Power Cycling
- khong, 2007, Fiabilité Prédictive de Composants de Puissance Soumis a des Tests de Fatigue Accélérée
- scheuermann, 0, Power cycling lifetime of advanced power modules for different temperature swings, Proc PCIM Eur, 59
- ong, 0, Heavy Al ribbon interconnect: An alternative solution for hybrid power packaging, Proc IMAPS Int J Microcircuits Electron Packag, 1
- guth, 0, New assembly and interconnects beyond sintering methods, Proc PCIM, 1
- stupar, 0, Lifetime model for solder layers, Proc ECPE Workshop, 1
- böttcher, 0, Laboratory setup for power cycling of IGBT modules with monitoring of ON-state voltage and thermal resistance for state of aging detection, Proc Int Exhib Conf Power Electron Intell Motion Renew Energy Manage PCIM, 1
- hutzler, 2014, Power Cycling Community 1995–2014, Bodo's Power Syst, 2014, 78
- thoben, 0, Modelling and experimental investigations on degradation of microcomponents in power cycling, Proc Ansys Paper, 1
- farassat, 2007, More performance at lower cost—Heavy aluminium ribbon bonding, 1
- 2014, Data sheet for power discrete device SO8-FL
- benzler, 0, New module generation for higher lifetime, Proc Bodo's Power Syst, 30
- jacques, 2010, Etude de la Fatigue Thermomécanique des Composants de Puissance de Type TRIAC Soumis a des Cycles Actifs de Températures
- bouarroudj-berkani, 2008, Etude de la thermo-mécanique de modules electroniques de puissance en ambiance de températures elevées pour des applications de traction de véhicules electriques et hybrides
Cited by
Items 201–239 of 239
Thermomechanical Reliability of Bond Wires in Power Modules Subjected to Power Cycling
Boutaleb, M., Roqueta, F., Moreau, F., Brenet, Y., & Barreau, L. (2025) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime65125.2025.11006624
“In the field of power electronics, reliability tests have identified primary failure mechanisms related to bond wire fatigue, solder degradation, reconstruction of metallization layers, adhesion and delamination issues between different layers, and cracking [8] [9] [10] [1 l].”
Jang, Y. B. (2025) · Microelectronics Reliability · doi:10.1016/j.microrel.2025.115831
Utsch, D., Turowski, T., Hecht, C., Thielen, N., Ockel, M., Franke, J. E., & Risch, F. (2025) · Ceramics · doi:10.3390/ceramics8030105
“In DCB technology, Al 2 O 3 and AlN ceramics are frequently used, with AlN requiring pre-oxidation in order to enable the bonding process [9,13–16].”
Li, X., Xia, Z., Han, L., Ma, K., Sun, Y., Liu, X., Song, Y., Chen, A., Zhang, X., Zhou, Y., et al. (2025) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept67137.2025.11157585 · Cited by 1
“Moreover, high operating temperatures accelerate thermomechanical stress at the bond interface, leading to fatigue, delamination, or bond lift-off [4].”
Wang, H., Ren, C., Liu, J., Chen, Z., Liu, F., Zhang, L., Meng, Q., Dong, L. R., Tan, J., Li, D., et al. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3624101
“The reliability of IGCTs is a critical issue, and junction temperature is a key factor affecting device reliability [4], [5].”
Ando, T., Kato, F., Senzaki, J., & Sato, H. (2025) · Transactions of The Japan Institute of Electronics Packaging · doi:10.5104/jiepeng.18.e25-001-1
Kolter, P., Ulbing, A., & Warmuth, A. (2025) · International Conference on Electrical Drives and Power Electronics (EDPE) · doi:10.1109/edpe66853.2025.11224103
“Hence, to extract the degradation status, it is necessary to know the junction temperature since it is the key parameter according to the devices lifetime [6], [7].”
Comparative FEA Analysis of Cu Clip and Al Wire Bonding in Power Discrete Packages
Choi, N.-Y., & Zhang, S.-U. (2025) · European Microelectronics and Packaging Conference · doi:10.23919/empc63132.2025.11222439
“As an alternative to address these issues, Cu Clip Bonding technology has gained attention [6].”
Buxbaum, C., Gajanur, N., Abbaszada, M. A., Mazumder, S. K., & McCluskey, F. P. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259680
“Power Cycling Tests (PCTs) are widely used to assess the reliability of power semiconductor devices under electrical and thermal stress [3][4][5].”
Luo, P., Shen, A., & Tang, Q. (2025) · IEEE International Symposium on Sensorless Control for Electrical Drives (SLED) · doi:10.1109/sled63792.2025.11154722
“According to the Coffin – Manson law, the operational lifetime of IGBT is negatively related to the junction temperature fluctuation [2].”
Kovács, M., & Józsa, V. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5718818
Effect of Low-Temperature Storage on Power Cycling Lifetime of Power Semiconductor Devices
Chang, K., Wang, X., Pan, M., Deng, E., Wei, Y., Yan, Y., & Huang, Y. (2026) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2026.3651460
“Section II introduces two types of power semiconductor devices with di ff erent package structures as the devices under tests (DUTs) and describes the principles of the power cycling test (PCT) for evaluating long-term operation and package reliability [17], together with the storage conditions.”
Seong, J., Choi, A. Y., Jeon, J., Lim, J., & Yoon, S. W. (2026) · IEEE Access · doi:10.1109/access.2026.3658650
A Damage Path Dependence Mode Identification Method for SiC MOSFETs Due to Power Cycling Test
Chen, C., Wang, H. L., Wang, C., Sun, Q., Guo, Y., & Zhai, G. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3658662
“A 5% –20% increase in V ds( on ) is considered the end of life (EOL) criterion in [33].”
An Accelerated Lifetime Model of SiC MOSFETs Considering Distribution Characteristics
Wang, H., Wang, C., Wang, Z., Guo, Y., Gao, J., & Zhai, G. (2025) · International Conference on System Reliability and Safety Engineering (SRSE) · doi:10.1109/srse67406.2025.11357411
“Power cycling test can be divided into two types: DC power cycling test and AC power cycling test [13].”
Improvement in bond wire reliability by adjustments in bond wire microstructure via heat treatment
Seltsam, J., Sippel, M., Kuglstatter, M., Schmidt, R., Dreher, P., Franke, J., & Höppel, H. W. (2026) · Microelectronics Reliability · doi:10.1016/j.microrel.2026.116025
Hu, M., Liu, W., Lyu, Z., Li, Z., Niu, S., & Chau, K. T. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3667037
“Furthermore, the fluctuation of junction temperature ( ∆ T j ) induces thermomechanical stress due to mismatched thermal expansion coe ffi cients within the device packaging, significantly impacting device lifetime [6], [7].”
A High Accuracy Lifetime Estimation Method for SiC MOSFETs Based on CNN-LSTM Networks
Ding, X., Wang, B., Yang, Y., Zhao, M., Yang, K., & Peng, L. (2026) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2026.3673635
“According to the IEC 60749-34 [29], ECPE guideline AQG 324 [30], and prior studies reported in [7], [11], [31], [32], [33], and [34], constant current and constant on / o ff time control strategy which closely reflects practical operating conditions of power devices, is adopted in this paper.”
Wu, W., Zhou, W., Chen, Y., Hou, B., & Zhang, J. (2025) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-xian66756.2025.11427846
“Power cycling test (PCT) is typically performed under low pressure and constant current conditions[28].”
AI surrogate models for lifetime prediction in power electronic modules
Ghrabli, M., Aldea, E., Berkani, M., & Chamoin, L. (2026) · Microelectronics Reliability · doi:10.1016/j.microrel.2026.116102
Thermal-Structural Modeling of a SiC-Based Power Module Subjected to Spatial Temperature Gradients
Mirone, G., Bua, G., & Barbagallo, R. (2026) · Conference of the Italian Association for Stress Analysis (AIAS) · doi:10.3390/engproc2026131005
Pan, M., Deng, E., Wei, Y., Chang, G., Zhou, W., Chen, J., Sun, H., Yan, Y., Liu, H., & Huang, Y. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3680175
“The PCT primarily assesses the aging caused by the mismatch in the coe ffi cients of thermal expansion (CTE) among di ff erent packaging materials under cyclic junction temperature swing ( ∆ T j ) [12].”
Fatigue thermomécanique des connexions dans les modules de puissance à semi-conducteurs.
Pellecuer, G. (2019) · theses.fr (ABES) · doi:10.70675/b0578c64z8528z4096z8793za6db1f29cc01 · Cited by 2
Condition and Health Monitoring of Modular Multilevel Converter for HVDC grids
Velazco, D. (2023) · theses.fr (ABES) · doi:10.70675/cdcd607fz268cz443bz8daazefedc0f8f044
Agogo-Mawuli, D., Lee, S., Barua, H., Chowdhury, S., Ozpineci, B., & Mantooth, H. A. (2025) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc65958.2025.11475300
“𝑇𝑇 𝑗𝑗 Rainflow counting and Miner’s rule are then applied to estimate accumulated damage (AD) and evaluate PM lifetime and reliability [9].”
THERMAL SPIKE MITIGATION: THERMOELECTRIC MANAGEMENT OF PRIMARY COOLING OVERLOAD
Westerfield, K. E., & VanderVeer, J. R. (2026) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2026.mes.061179
Design for reliability in induction heating applications
Esteve, V. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-45231-4.00005-4
A Comparative Review of Junction Temperature Monitoring for SiC-Based Power Semiconductor Devices
Zhu, G., Li, X., Xiong, S., & Wang, C. (2026) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2026.3689949
“PRA mainly includes bond-wire failure, solder degradation, and top metallization degradation [113], [114].”
AI-assisted vibration-based fault diagnosis of IGBT modules in electric vehicles
Khasanov, F., Khalikova, L. U., & Yuldasheva, A. (2026) · Vibroengineering PROCEDIA · doi:10.21595/vp.2026.26227
“Although fatigue under thermal and power cycling has been widely studied, early detection of vibration-induced degradation remains insufficiently addressed [2], [3].”
Investigation of degradations in p-GaN gate power HEMTs after power cycling test
Kim, T., Kinam, S., Kim, K., & 강인호 (2026) · Microelectronics Reliability · doi:10.1016/j.microrel.2026.116206
Morel, C., & Morel, J.-Y. (2026) · Energies · doi:10.3390/en19132977
Bradford, P., & Wang, H. (2026) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-nagasaki2026-ec64663.2026.11597344
“In [5] and [8] power cycling is used to test the reliability of Silicon (Si) power devices.”
Исабекова, Т. И., & Расуловна, Ш. А. (2026) · Russian Microelectronics · doi:10.1134/s1063739726600305
“The R _on( N ) and R _th( N ) dependences are power-law,, which is typical of fatigue processes [13, 22].”
Laser Marking Process and Reliability of Power Modules
Li, X., Yang, M., Lu, J., & Kang, Y. (2026) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept71373.2026.11690314
“Therefore, reliable QR code marking on the side frame is of great importance for ensuring manufacturing traceability in automotive power module production [1] .”
Blocking-State Reliability Characterization of GaN HEMTs for Lunar Power Applications
Rana, D., Khadka, P., Qiu, T., & Zhang, Z. (2026) · IEEE Workshop on Power Electronics for Aerospace Applications (PEASA) · doi:10.1109/peasa69433.2026.11709505
“Under thermal cycling alone, package-related failure mechanisms, including bond-wire fatigue, solder fatigue, and interface delamination, are considered major reliability concerns [28], particularly under the extreme temperature variations associated with the lunar day–night cycle.”
Gao, X., Wang, Y., Ma, C., Jia, Q., Ma, L., Zou, G., & 郭福 (2026) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2026.111177
A Review of Condition Monitoring and Lifetime Prediction for Power Semiconductor Devices
Molenaar, M., Shekhar, A., & Bauer, P. (2026) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc69244.2026.11726138
“The authors of [11] reviewed 70 publications that performed power cycling tests, but the majority used IGBTs while only 10% focus on MOSFETs.”
Du, L., Du, T., & Chen, C. (2026) · Journal of Applied Physics · doi:10.1063/5.0353762
Metadata
- Authors
- Durand, C., Klingler, M., Coutellier, D., & Naceur, H.
- Affiliations
- Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielles et Humaines (FR)
- Robert Bosch (Germany) (DE)
- Centre National de la Recherche Scientifique (FR)
- Venue
- IEEE Transactions on Device and Materials Reliability
- Published
- 2016-03
- Volume
- 16
- Issue
- 1
- Pages
- 80-97
- ISSN
- 1530-4388 (ISSN-L)
- 1558-2574
- OpenAlex
- W2294980933
- Cited by
- 239
- References
- 94
- Citations by year
- 2026: 26 · 2025: 29 · 2024: 24 · 2023: 29 · 2022: 26 · 2021: 29 · 2020: 19 · 2019: 25 · 2018: 17 · 2017: 12 · 2016: 3
- FWCI
- 8.76
- Type
- journal article
- Language
- en
- Open access
- green
- uphf.hal.science
- Locations
- IEEE Transactions on Device and Materials Reliability (publishedVersion)
- HAL (submittedVersion, other-oa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- power cycling reliability, power modules, power devices, traction applications, IGBT, metal-oxide-semiconductor field-effect transistors, power cycling test, fatigue process, heat sinks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.