The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
Open accessAbstract
This paper presents an overview of motor drive technologies used for safety-critical aerospace applications, with a particular focus placed on the choice of candidate machines and their drive topologies. Aircraft applications demand high reliability, high availability, and high power density while aiming to reduce weight, complexity, fuel consumption, operational costs, and environmental impact. New electric driven systems can meet these requirements and also provide significant technical and economic improvements over conventional mechanical, hydraulic, or pneumatic systems. Fault-tolerant motor drives can be achieved by partitioning and redundancy through the use of multichannel three-phase systems or multiple single-phase modules. Analytical methods are adopted to compare caged induction, reluctance, and PM motor technologies and their relative merits. The analysis suggests that the dual (or triple) three-phase PMAC motor drive may be a favored choice for general aerospace applications, striking a balance between necessary redundancy and undue complexity, while maintaining a balanced operation following a failure. The modular single-phase approach offers a good compromise between size and complexity but suffers from high total harmonic distortion of the supply and high torque ripple when faulted. For each specific aircraft application, a parametrical optimization of the suitable motor configuration is needed through a coupled electromagnetic and thermal analysis, and should be verified by finite-element analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiphase Electric Machines for Variable-Speed Applications
Levi, E. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918488 · Cited by 2,157
EL-Refaie, A. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030211 · Cited by 1,373
Welchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724
Design considerations for fractional-slot winding configurations of synchronous machines
Bianchi, N., Bolognani, S., Pre, M. D., & Grezzani, G. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.876070 · Cited by 447
Power Electronics and Motor Drives Recent Progress and Perspective
Bose, B. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2002726 · Cited by 431
Experimental fault-tolerant control of a PMSM drive
Bolognani, S., Zordan, M., & Zigliotto, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873223 · Cited by 382
Fault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376 · cited 1×
“To improve fault tolerance, it would be ideal to have a multiple of independent single-phase drives [19], [44], [47],”
BackgroundSelf-citationA strategy for improving reliability of field-oriented controlled induction motor drives
Liu, T.-H., Fu, J.-R., & Lipo, T. A. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.245714 · Cited by 374
Jack, A. G., Mecrow, B. C., & Haylock, J. A. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.511646 · Cited by 368
Self-citationImproved Reliability in Solid-State AC Drives by Means of Multiple Independent Phase Drive Units
Jahns, T. M. (1980) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1980.4503793 · Cited by 358
Jack, A. G., Mecrow, B. C., & Haylock, J. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530372 · Cited by 306
Self-citationFault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMF
Dwari, S., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2045322 · Cited by 289
Design and Testing of a Four-Phase Fault-Tolerant Permanent-Magnet Machine for an Engine Fuel Pump
Mecrow, B. C., Jack, A. G., Atkinson, D. J., Green, S. R., Atkinson, G. J., King, A., & Green, B. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.832074 · Cited by 252
Self-citationThe safety critical electric machines and drives in the more electric aircraft: A survey
Boglietti, A., Cavagnino, A., Tenconi, A., Vaschetto, S., & di Torino, P. (2009) · 2009 35th Annual Conference of IEEE Industrial Electronics · doi:10.1109/iecon.2009.5415238 · Cited by 239
Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications
de Lillo, L., Empringham, L., Wheeler, P. W., Khwan-On, S., Gerada, C., Othman, M. N., & Huang, X. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036026 · Cited by 198
An induction motor drive system with improved fault tolerance
Beltrao de Rossiter Correa, M., Brandao Jacobina, C., Cabral da Silva, E. R., & Nogueira Lima, A. M. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.924770 · Cited by 174
Analysis and Tests of a Dual Three-Phase 12-Slot 10-Pole Permanent-Magnet Motor
Barcaro, M., Bianchi, N., & Magnussen, F. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2070784 · Cited by 173
Zhang, H., Mollet, F., Saudemont, C., & Robyns, B. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046575 · Cited by 158
Operation of fault tolerant machines with winding failures
Haylock, J. A., Mecrow, B. C., Jack, A. G., & Atkinson, D. J. (1999) · IEEE Transactions on Energy Conversion · doi:10.1109/60.815095 · Cited by 148
Self-citationAn induction motor drive system with improved fault tolerance
Correa, M. B. D. R., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2000.883112 · Cited by 146
The Analysis of Losses in High-Power Fault-Tolerant Machines for Aerospace Applications
Atkinson, G. J., Mecrow, B. C., Jack, A. G., Atkinson, D. J., Sangha, P., & Benarous, M. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880869 · Cited by 145
Self-citationFault detection and management system for fault tolerant switched reluctance motor drives
Stephens, C. M. (2003) · doi:10.1109/papcon.1992.186280 · Cited by 142
The More Electric Aircraft: the past and the future?
Jones, R. I. (1999) · doi:10.1049/ic:19990830 · Cited by 137
Remedial strategies for brushless DC drive failures
Speed, R., & Wallace, A. K. (1990) · IEEE Transactions on Industry Applications · doi:10.1109/28.54251 · Cited by 131
Analysis and tests of a dual three-phase 12-slot 10-pole permanent magnet motor
Barcaro, M., Bianchi, N., & Magnussen, F. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316094 · Cited by 124
Impact of Stator Winding of a Five-Phase Permanent-Magnet Motor on Postfault Operations
Bianchi, N., Bolognani, S., & Pré, M. D. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.920645 · Cited by 121
Fault detection and management system for fault-tolerant switched reluctance motor drives
Stephens, C. M. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.108460 · Cited by 116
Safety-critical design of electromechanical actuation systems in commercial aircraft
Bennett, J. W., Mecrow, B. C., Atkinson, D. J., & Atkinson, G. J. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0304 · Cited by 111
Self-citationMulti-phase fault-tolerant brushless DC motor drives
Gopalarathnam, T., Toliyat, H. A., & Moreira, J. C. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2000.882107 · Cited by 91
A collaborative approach to the More Electric Aircraft
Cutts, S. J. (2002) · IET International Conference on Power Electronics, Machines and Drives (PEMD) · doi:10.1049/cp:20020118 · Cited by 78
A Prototype Electrical Actuator for Aircraft Flaps
Bennett, J. W., Mecrow, B. C., Jack, A. G., & Atkinson, D. J. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2046278 · Cited by 57
Self-citationA strategy for improving reliability of motor drive systems using a four-leg three-phase converter
Ribeiro, R. L. A., Jacobina, C. B., Lima, A. M. N., et al. (2002) · doi:10.1109/apec.2001.911676 · Cited by 53
Reluctance motor control for fault-tolerant capability
Qin, D., Luo, X., & Lipo, T. A. (2002) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.1997.604282 · Cited by 32
Wolmarans, J. J., Polinder, H., Ferreira, J. A., & Clarenbach, D. (2009) · European Conference on Power Electronics and Applications · Cited by 16
Cited by
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
Barrero, F., & Duran, M. J. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2447733 · Cited by 927
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part II
Duran, M. J., & Barrero, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2448211 · Cited by 658
Electrical Power Generation in Aircraft: Review, Challenges, and Opportunities
Madonna, V., Giangrande, P., & Galea, M. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2834142 · Cited by 636
A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor Drives
Munim, W. N. W. A., Duran, M. J., Che, H. S., Bermudez, M., Gonzalez-Prieto, I., & Rahim, N. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2632118 · Cited by 292
Jiang, Y., Zhang, Z., Jiang, W., Geng, W., & Huang, J. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0754 · Cited by 45
Metadata
- Authors
- Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-09
- Volume
- 59
- Issue
- 9
- Pages
- 3523-3531
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1978050119
- Cited by
- 1,026
- References
- 34
- FWCI
- 20.72
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.