The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
A Study on Magnetic Field Repeater in Wireless Power Transfer
Abstract
It is shown that the distance of wireless power transfer is significantly increased by placing intermediate resonators (repeaters) between transmitter and receiver. The guidelines are provided to use the repeaters effectively. We first briefly review how the repeaters enhance the transfer distance. Next, the aspect of resonant frequency splitting is studied separately both for even and odd numbers of repeaters. The transferred power, efficiency, and output impedance phase are evaluated for each repeater configuration. These provide the guidelines to select the optimum repeater positions and numbers. We also propose and study a new kind of repeater which can be placed (biased) even in the vicinity of transmitter or receiver. This increases the flexibility in choosing the repeater position. The net effect of such biased repeater is approximately doubling the effective coupling coefficient between transmitter and receiver. Experimental results are provided to prove the concepts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Sample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
RamRakhyani, A. K., Mirabbasi, S., & Chiao, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2010.2072782 · Cited by 945
Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Low, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
A contactless electrical energy transmission system for portable-telephone battery chargers
Jang, Y., & Jovanovic, M. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812472 · Cited by 484
A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.904025 · Cited by 439
Design of radio-frequency powered coils for implant instruments
Ko, W. H., Liang, S. P., & Fung, C. D. F. (1977) · Medical & Biological Engineering & Computing · doi:10.1007/bf02457921 · Cited by 374
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Design of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
Feedback Analysis and Design of RF Power Links for Low-Power Bionic Systems
Baker, M. W., & Sarpeshkar, R. (2007) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2007.893180 · Cited by 317
Contactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
Power harvesting and telemetry in CMOS for implanted devices
Sauer, C., Stanacevic, M., Cauwenberghs, G., & Thakor, N. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.858183 · Cited by 249
A contactless electrical energy transmission system
Pedder, D. A. G., Brown, A. D., & Skinner, J. A. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744372 · Cited by 242
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
An optimal design methodology for inductive power link with class-E amplifier
Kendir, G. A., Liu, W., Wang, G., Sivaprakasam, M., Bashirullah, R., Humayun, M. S., & Weiland, J. D. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.846208 · Cited by 222
Efficiency Analysis of Magnetic Resonance Wireless Power Transfer With Intermediate Resonant Coil
Kim, J., Son, H.-C., Kim, K.-H., & Park, Y.-J. (2011) · IEEE Antennas and Wireless Propagation Letters · doi:10.1109/lawp.2011.2150192 · Cited by 210
Relay Effect of Wireless Power Transfer Using Strongly Coupled Magnetic Resonances
Zhang, F., Hackworth, S. A., Fu, W., Li, C., Mao, Z., & Sun, M. (2011) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2010.2087010 · Cited by 197
An Airborne Radar Power Supply With Contactless Transfer of Energy—Part I: Rotating Transformer
Papastergiou, K. D., & Macpherson, D. E. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.902044 · Cited by 139
Magnetic Metamaterials as 1-D Data Transfer Channels: An Application for Magneto-Inductive Waves
Stevens, C. J., Chan, C. W. T., Stamatis, K., & Edwards, D. J. (2010) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2010.2045562 · Cited by 74
Wireless powering of single-chip systems with integrated coil and external wire-loop resonator
Segura-Quijano, F. E., García-Cantón, J., Sacristán, J., Osés, T., & Baldi, A. (2008) · Applied Physics Letters · doi:10.1063/1.2887885 · Cited by 45
Resonantly coupled antennas for passive sensors
Rindorf, L., Lading, L., & Breinbjerg, O. (2008) · Italian National Conference on Sensors · doi:10.1109/icsens.2008.4716759 · Cited by 34
Cited by
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Wireless Power Transmission With Self-Regulated Output Voltage for Biomedical Implant
Ahn, D., & Hong, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273472 · Cited by 315
Self-citationBarman, S. D., Reza, A. W., Kumar, N., Karim, M. E., & Munir, A. B. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.031 · Cited by 303
Luo, Z., & Wei, X. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2723867 · Cited by 285
Metadata
- Authors
- Ahn, D., & Hong, S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-01
- Volume
- 60
- Issue
- 1
- Pages
- 360-371
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1972436942
- Cited by
- 351
- References
- 25
- FWCI
- 14.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.