The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview
Abstract
Hybrid and electric vehicle technology has seen rapid development in recent years. The motor and the generator are at the heart of the vehicle drive and energy system and often utilize expensive rare-earth permanent magnet (PM) material. This paper reviews and addresses the research work that has been carried out to reduce the amount of rare-earth material that is used while maintaining the high efficiency and performance that rare-earth PM machines offer. These new machines can use either less rare-earth PM material, weaker ferrite magnets, or no magnets; and they need to meet the high performance that the more usual interior PM synchronous motor with sintered neodymium-iron-boron magnets provides. These machines can take the form of PM-assisted synchronous reluctance machines, induction machines, switched reluctance machines, wound rotor synchronous machines (claw pole or biaxially excited), double-saliency machines with ac or dc stator current control, or brushless dc multiple-phase reluctance machines.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,496
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 3×
“configuration in the Toyota Hybrid Synergy II version (2004) [4].”
BackgroundMethodInfluentialEnergy Storage Systems for Automotive Applications
Lukic, S. M., Cao, J., Bansal, R. C., Rodriguez, F., & Emadi, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918390 · Cited by 1,025
Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study
Zeraoulia, M., Benbouzid, M. E. H., & Diallo, D. (2006) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2006.878719 · Cited by 691
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669
Evaluation of the 2010 Toyota Prius Hybrid Synergy Drive System
Burress, T. A., Campbell, S. L., Coomer, C., Ayers, C. W., Wereszczak, A. A., Cunningham, J. P., Marlino, L. D., Seiber, L. E., & Lin, H.-T. (2011) · doi:10.2172/1007833 · Cited by 517
Electric and Hybrid Vehicles: Design Fundamentals
Husain, I. (2021) · Cited by 517
Comparison of Induction and PM Synchronous Motor Drives for EV Application Including Design Examples
Pellegrino, G., Vagati, A., Boazzo, B., & Guglielmi, P. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2227092 · Cited by 461
Fault-Tolerant Interior-Permanent-Magnet Machines for Hybrid Electric Vehicle Applications
Parsa, L., & Toliyat, H. A. (2007) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2007.896978 · Cited by 317
Self-citationReddy, P. B., El-Refaie, A. M., Huh, K.-K., Tangudu, J. K., & Jahns, T. M. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2012.2195316 · Cited by 253
Kiyota, K., & Chiba, A. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2227091 · Cited by 253
Takeno, M., Chiba, A., Hoshi, N., Ogasawara, S., Takemoto, M., & Rahman, M. A. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2199952 · Cited by 226
Performance Evaluation of a High-Power-Density PMASynRM With Ferrite Magnets
Ooi, S., Morimoto, S., Sanada, M., et al. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2253293 · Cited by 200
Wang, J., Yuan, X., & Atallah, K. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2227867 · Cited by 184
Dorrell, D. G., Knight, A. M., Evans, L., & Popescu, M. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165460 · Cited by 165
Self-citationComparison of different motor design drives for hybrid electric vehicles
Dorrell, D. G., Knight, A. M., Popescu, M., Evans, L., & Staton, D. A. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5618318 · Cited by 163
Self-citationFlux-Switching Motors for Automotive Applications
Pollock, C., Pollock, H., Barron, R., Coles, J. R., Moule, D., Court, A., & Sutton, R. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880842 · Cited by 163
Fault-Tolerant In-Wheel Motor Topologies for High-Performance Electric Vehicles
Ifedi, C. J., Mecrow, B. C., Brockway, S. T. M., Boast, G. S., Atkinson, G. J., & Kostic-Perovic, D. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2252131 · Cited by 158
Direct-Driven Interior Magnet Permanent-Magnet Synchronous Motors for a Full Electric Sports Car
Nerg, J. K., Rilla, M., Ruuskanen, V., Pyrhonen, J. J., & Ruotsalainen, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2248340 · Cited by 144
Drive Cycle Generation for Design Optimization of Electric Vehicles
Schwarzer, V., & Ghorbani, R. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2219889 · Cited by 122
Dorrell, D. G., Hsieh, M., & Knight, A. M. (2012) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2011.2175443 · Cited by 118
Self-citationWound Rotor Salient Pole Synchronous Machine Drive for Electric Traction
Rossi, C., Casadei, D., Pilati, A., & Marano, M. (2006) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2006.256689 · Cited by 93
Dorrell, D. G. (2012) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2012.6389578 · Cited by 84
Self-citationIntelligent Sensorless ABS for In-Wheel Electric Vehicles
Dadashnialehi, A., Bab‐Hadiashar, A., Cao, Z., & Kapoor, A. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2266085 · Cited by 68
Patil, R. M., Kelly, J. C., Filipi, Z. S., & Fathy, H. K. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2243850 · Cited by 53
Sergeant, P., & den Bossche, A. P. M. V. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2258310 · Cited by 47
Comparative study of electric drives for EV/HEV propulsion system
Wang, W., & Fahimi, B. (2012) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars.2012.6387497 · Cited by 29
Cited by
Yang, Z., Shang, F., Brown, I. P., & Krishnamurthy, M. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2470092 · Cited by 718
Bostanci, E., Moallem, M., Parsapour, A., & Fahimi, B. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2649883 · Cited by 430
Wen, J., Zhao, D., & Zhang, C. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.09.055 · Cited by 422
Gan, C., Wu, J., Sun, Q., Kong, W., Li, H., & Hu, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2837111 · Cited by 286
Liu, T., Zou, Y., Liu, D., & Sun, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2475419 · Cited by 278
Metadata
- Authors
- Boldea, I., Tutelea, L. N., Parsa, L., & Dorrell, D.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-10
- Volume
- 61
- Issue
- 10
- Pages
- 5696-5711
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2056538626
- Cited by
- 813
- References
- 27
- FWCI
- 33.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.