The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Multisensor Feature Fusion for Bearing Fault Diagnosis Using Sparse Autoencoder and Deep Belief Network
Abstract
To assess health conditions of rotating machinery efficiently, multiple accelerometers are mounted on different locations to acquire a variety of possible faults signals. The statistical features are extracted from these signals to identify the running status of a machine. However, the acquired vibration signals are different due to sensor's arrangement and environmental interference, which may lead to different diagnostic results. In order to improve the fault diagnosis reliability, a new multisensor data fusion technique is proposed. First, time-domain and frequency-domain features are extracted from the different sensor signals, and then these features are input into multiple two-layer sparse autoencoder (SAE) neural networks for feature fusion. Finally, fused feature vectors can be regarded as the machine health indicators, and be used to train deep belief network (DBN) for further classification. To verify the effectiveness of the proposed SAE-DBN scheme, the bearing fault experiments were conducted on a bearing test platform, and the vibration data sets under different running speeds were collected for algorithm validation. For comparison, different feature fusion methods were also applied to multisensor fusion in the experiments. Experimental results demonstrated that the proposed approach can effectively identify the machine running conditions and significantly outperform other fusion methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2008) · Journal of Machine Learning Research · Cited by 33,051
A fast learning algorithm for deep belief nets
Hinton, G. E., Osindero, S., & Teh, Y.-W. (2006) · Neural Computation · doi:10.1162/neco.2006.18.7.1527 · Cited by 16,336
Learning Deep Architectures for AI
Bengio, Y. (2009) · Foundations and Trends® in Machine Learning · doi:10.1561/2200000006 · Cited by 9,239
A Practical Guide to Training Restricted Boltzmann Machines
Hinton, G. E. (2012) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-35289-8_32 · Cited by 2,852
A sparse auto-encoder-based deep neural network approach for induction motor faults classification
Sun, W., Shao, S., Zhao, R., Yan, R., Zhang, X., & Chen, X. (2016) · Measurement · doi:10.1016/j.measurement.2016.04.007 · Cited by 698
Bearing Health Monitoring Based on Hilbert–Huang Transform, Support Vector Machine, and Regression
Soualhi, A., Medjaher, K., & Zerhouni, N. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2330494 · Cited by 665
Failure diagnosis using deep belief learning based health state classification
Tamilselvan, P., & Wang, P. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2013.02.022 · Cited by 630
Rolling bearing fault diagnosis using an optimization deep belief network
Shao, H., Jiang, H., Zhang, X., & Niu, M. (2015) · Measurement Science and Technology · doi:10.1088/0957-0233/26/11/115002 · Cited by 517
Tran, V. T., AlThobiani, F., & Ball, A. (2014) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.12.026 · Cited by 386
Haghighat, M., Abdel-Mottaleb, M., & Alhalabi, W. (2016) · IEEE Transactions on Information Forensics and Security · doi:10.1109/tifs.2016.2569061 · Cited by 379
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Self-citationA review on the application of deep learning in system health management
Khan, S., & Yairi, T. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.024 · Cited by 1,133
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
A survey on deep learning based bearing fault diagnosis
Hoang, D.-T., & Kang, H.-J. (2019) · Neurocomputing · doi:10.1016/j.neucom.2018.06.078 · Cited by 866
State of the Art in Defect Detection Based on Machine Vision
Ren, Z., Fang, F., Yan, N., & Wu, Y. (2022) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-021-00343-6 · Cited by 799
Bearing fault diagnosis base on multi-scale CNN and LSTM model
Chen, X., Zhang, B., & Gao, D. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01600-2 · Cited by 739
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Data-Driven Methods for Predictive Maintenance of Industrial Equipment: A Survey
Zhang, W., Yang, D., & Wang, H. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2905565 · Cited by 732
Neupane, D., & Seok, J. (2020) · IEEE Access · doi:10.1109/access.2020.2990528 · Cited by 568
Sun, C., Ma, M., Zhao, Z., Tian, S., Yan, R., & Chen, X. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2881543 · Cited by 519
Jia, F., Lei, Y., Guo, L., Lin, J., & Xing, S. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.07.032 · Cited by 517
Deep Transfer Learning for Bearing Fault Diagnosis: A Systematic Review Since 2016
Chen, X., Yang, R., Xue, Y., Huang, M., Ferrero, R., & Wang, Z. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3244237 · Cited by 516
Deep-Convolution-Based LSTM Network for Remaining Useful Life Prediction
Ma, M., & Mao, Z. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2991796 · Cited by 514
Chen, Z., Mauricio, A., Li, W., & Gryllias, K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106683 · Cited by 470
Self-citationDCNN-Based Multi-Signal Induction Motor Fault Diagnosis
Shao, S., Yan, R., Lu, Y., Wang, P., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2925247 · Cited by 442
An Improved Quantum-Inspired Differential Evolution Algorithm for Deep Belief Network
Deng, W., Liu, H., Xu, J., Zhao, H., & Song, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2983233 · Cited by 429
Limited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
Li, Y., Song, Y., Jia, L., Gao, S., Li, Q., & Qiu, M. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3008010 · Cited by 399
Mechanical fault diagnosis using Convolutional Neural Networks and Extreme Learning Machine
Chen, Z., Gryllias, K., & Li, W. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106272 · Cited by 390
Self-citationZhao, B., Zhang, X., Li, H., & Yang, Z. (2020) · Knowledge-Based Systems · doi:10.1016/j.knosys.2020.105971 · Cited by 386
A Motor Current Signal-Based Bearing Fault Diagnosis Using Deep Learning and Information Fusion
Hoang, D. T., & Kang, H. J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2933119 · Cited by 378
A review of deep learning used in the hyperspectral image analysis for agriculture
Wang, C., Liu, B., Liu, L., Zhu, Y., Hou, J., Liu, P., & Li, X. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-021-10018-y · Cited by 362
Bearing performance degradation assessment using long short-term memory recurrent network
Zhang, B., Zhang, S., & Li, W. (2019) · Computers in Industry · doi:10.1016/j.compind.2018.12.016 · Cited by 354
Self-citationA New Intelligent Bearing Fault Diagnosis Method Using SDP Representation and SE-CNN
Wang, H., Xu, J., Yan, R., & Gao, R. X. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2956332 · Cited by 353
Azamfar, M., Singh, J., Bravo-Imaz, I., & Lee, J. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106861 · Cited by 353
Intelligent Fault Diagnosis for Rotary Machinery Using Transferable Convolutional Neural Network
Chen, Z., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2917233 · Cited by 342
Self-citationWang, H., Li, S., Song, L., & Cui, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2018.12.013 · Cited by 338
Deep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2019.2963092 · Cited by 323
Diagnosisformer: An efficient rolling bearing fault diagnosis method based on improved Transformer
Hou, Y., Wang, J., Chen, Z., Ma, J., & Li, T. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106507 · Cited by 321
Self-citationA novel approach of multisensory fusion to collaborative fault diagnosis in maintenance
Shao, H., Lin, J., Zhang, L., Galar, D., & Kumar, U. (2021) · Information Fusion · doi:10.1016/j.inffus.2021.03.008 · Cited by 320
Auto-Encoders in Deep Learning—A Review with New Perspectives
Chen, S., & Guo, W. (2023) · Mathematics · doi:10.3390/math11081777 · Cited by 318
Multi-scale deep intra-class transfer learning for bearing fault diagnosis
Wang, X., Shen, C., Xia, M., Wang, D., Zhu, J., & Zhu, Z. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107050 · Cited by 313
Deep learning for prognostics and health management: State of the art, challenges, and opportunities
Rezaeianjouybari, B., & Shang, Y. (2020) · Measurement · doi:10.1016/j.measurement.2020.107929 · Cited by 310
Gawde, S., Patil, S., Kumar, S., Kamat, P., Kotecha, K., & Abraham, A. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106139 · Cited by 306
Hakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Deep Coupling Autoencoder for Fault Diagnosis With Multimodal Sensory Data
Ma, M., Sun, C., & Chen, X. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2793246 · Cited by 304
Elahi, M., Afolaranmi, S. O., Martinez Lastra, J. L., & Perez Garcia, J. A. (2023) · Discover Artificial Intelligence · doi:10.1007/s44163-023-00089-x · Cited by 303
Domain Adversarial Transfer Network for Cross-Domain Fault Diagnosis of Rotary Machinery
Chen, Z., He, G., Li, J., Liao, Y., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2995441 · Cited by 300
Self-citationYu, W., & Zhao, C. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2931255 · Cited by 295
Convolutional neural network based bearing fault diagnosis of rotating machine using thermal images
Choudhary, A., Mian, T., & Fatima, S. (2021) · Measurement · doi:10.1016/j.measurement.2021.109196 · Cited by 292
Han, T., Li, Y.-F., & Qian, M. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3088489 · Cited by 288
Domain Adversarial Graph Convolutional Network for Fault Diagnosis Under Variable Working Conditions
Li, T., Zhao, Z., Sun, C., Yan, R., & Chen, X. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3075016 · Cited by 280
A comparative review on multi-modal sensors fusion based on deep learning
Tang, Q., Liang, J., & Zhu, F. (2023) · Signal Processing · doi:10.1016/j.sigpro.2023.109165 · Cited by 280
Cheng, C., Zhou, B., Ma, G., Wu, D., & Yuan, Y. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.05.040 · Cited by 271
Multi-Sensor data fusion in intelligent fault diagnosis of rotating machines: A comprehensive review
Kibrete, F., Engida Woldemichael, D., & Shimels Gebremedhen, H. (2024) · Measurement · doi:10.1016/j.measurement.2024.114658 · Cited by 270
Ding, Y., Zhuang, J., Ding, P., & Jia, M. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108126 · Cited by 253
Faults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review
Chen, Y., Liang, S., Li, W., Liang, H., & Wang, C. (2019) · Applied Sciences · doi:10.3390/app9102116 · Cited by 194
Self-citationContrastive learning based self-supervised time-series analysis
Pöppelbaum, J., Chadha, G. S., & Schwung, A. (2022) · Applied Soft Computing · doi:10.1016/j.asoc.2021.108397 · Cited by 131
Metadata
- Authors
- Chen, Z., & Li, W.
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2017-07
- Volume
- 66
- Issue
- 7
- Pages
- 1693-1702
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2603304445
- Cited by
- 883
- References
- 22
- FWCI
- 50.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.