The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power Devices
Abstract
This paper presents an isolated on-board vehicular battery charger that utilizes silicon carbide (SiC) power devices to achieve high density and high efficiency for application in electric vehicles (EVs) and plug-in hybrid EVs (PHEVs). The proposed level 2 charger has a two-stage architecture where the first stage is a bridgeless boost ac-dc converter and the second stage is a phase-shifted full-bridge isolated dc-dc converter. The operation of both topologies is presented and the specific advantages gained through the use of SiC power devices are discussed. The design of power stage components, the packaging of the multichip power module, and the system-level packaging is presented with a primary focus on system density and a secondary focus on system efficiency. In this work, a hardware prototype is developed and a peak system efficiency of 95% is measured while operating both power stages with a switching frequency of 200 kHz. A maximum output power of 6.1 kW results in a volumetric power density of 5.0 kW/L and a gravimetric power density of 3.8 kW/kg when considering the volume and mass of the system including a case.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“2279950 are required to meet the increasing demands for automotive electrical power while minimizing the weight and volume of the system, to lessen the impact on vehicular system packaging, and to maximize the efficiency of the system [2], [3].”
BackgroundDesign considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter
Sabate, J. A., Vlatkovic, V., Ridley, R. B., Lee, F. C., & Cho, B. H. (1990) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1990.66420 · Cited by 1,015
Biela, J., Schweizer, M., Waffler, S., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072896 · Cited by 892
Performance Evaluation of Bridgeless PFC Boost Rectifiers
Huber, L., Jang, Y., & Jovanovic, M. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921107 · Cited by 865
Emadi, A., Williamson, S. S., & Khaligh, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872378 · Cited by 714
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
An assessment of wide bandgap semiconductors for power devices
Hudgins, J. L., Simin, G. S., Santi, E., & Khan, M. A. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.810840 · Cited by 610
Power Conversion With SiC Devices at Extremely High Ambient Temperatures
Funaki, T., Balda, J. C., Junghans, J., Kashyap, A. S., Mantooth, H. A., Barlow, F., Kimoto, T., & Hikihara, T. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900561 · Cited by 333
A high-performance single-phase rectifier with input power factor correction
Martinez, R., & Enjeti, P. N. (1996) · IEEE Transactions on Power Electronics · doi:10.1109/63.486181 · Cited by 279
An Automotive Onboard 3.3-kW Battery Charger for PHEV Application
Gautam, D. S., Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2210259 · Cited by 274
Impact of SiC Devices on Hybrid Electric and Plug-In Hybrid Electric Vehicles
Zhang, H., Tolbert, L. M., & Ozpineci, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2102734 · Cited by 255
SiC power diodes provide breakthrough performance for a wide range of applications
Hefner, A. R., Singh, R., Lai, J.-S., Berning, D. W., Bouche, S., & Chapuy, C. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.911152 · Cited by 185
Plug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility
Wirasingha, S. G., Schofield, N., & Emadi, A. (2008) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2008.4677702 · Cited by 177
A High-Temperature SiC Three-Phase AC–DC Converter Design for >$100 ^{\circ}$C Ambient Temperature
Wang, R., Boroyevich, D., Ning, P., Wang, Z., Wang, F. “., Mattavelli, P., Ngo, K. D. T., & Rajashekara, K. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2199131 · Cited by 126
A 1-MHz hard-switched silicon carbide DC–DC converter
Abou-Alfotouh, A. M., Radun, A. V., Chang, H., & Winterhalter, C. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.876891 · Cited by 93
Investigation of 1.2 kV SiC MOSFET for high frequency high power applications
Sheng, H., Chen, Z., Wang, F., & Millner, A. R. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433441 · Cited by 93
An overview of Cree silicon carbide power devices
Richmond, J., Ryu, S., Das, M. K., Krishnaswami, S., Hodge, S. J., Agarwal, A., & Palmour, J. W. (2005) · IEEE Workshop on Power Electronics in Transportation · doi:10.1109/pet.2004.1393789 · Cited by 66
Efficiency optimization of high power density Dual Active Bridge DC-DC converter
Guidi, G., Pavlovsky, M., Kawamura, A., Imakubo, T., & Sasaki, Y. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5542146 · Cited by 52
Cole, Z., Passmore, B., Whitaker, B., Barkley, A., McNutt, T. R., & Lostetter, A. B. (2012) · IMAPSource Proceedings · doi:10.4071/isom-2012-thp33 · Cited by 8
Self-citation
Cited by
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Technology Development of Electric Vehicles: A Review
Sun, X., Li, Z., Wang, X., & Li, C. (2019) · Energies · doi:10.3390/en13010090 · Cited by 476
Xue, L., Shen, Z., Boroyevich, D., Mattavelli, P., & Diaz, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2413815 · Cited by 420
Chakraborty, S., Vu, H.-N., Hasan, M. M., Tran, D.-D., Baghdadi, M. E., & Hegazy, O. (2019) · Energies · doi:10.3390/en12081569 · Cited by 384
Multi-Objective Optimization of 50 kW/85 kHz IPT System for Public Transport
Bosshard, R., & Kolar, J. W. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2598755 · Cited by 317
Metadata
- Authors
- Whitaker, B., Barkley, A., Cole, Z., Passmore, B., Martin, D., McNutt, T. R., Lostetter, A. B., Lee, J. S., & Shiozaki, K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2014-05
- Volume
- 29
- Issue
- 5
- Pages
- 2606-2617
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2039914397
- Cited by
- 441
- References
- 20
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.