High-Efficiency Bidirectional Buck–Boost Converter for Photovoltaic and Energy Storage Systems in a Smart Grid
The DOI matches its Crossref record; 29 of the 31 references it cites were found in a registry or an index.
Abstract
This paper proposes a new bidirectional buck-boost converter, which is a key component in a photovoltaic and energy storage system (ESS). Conventional bidirectional buck-boost converters for ESSs operate in discontinuous conduction mode (DCM) to achieve zero-voltage switching turn-ON for switches. However, operation in DCM causes high ripples in the output voltage and current, as well as low power-conversion efficiency. To improve the performance of the conventional converter, the proposed converter has a new combined structure of a cascaded buck-boost converter and an auxiliary capacitor. The combined structure of the proposed converter reduces the output current ripple by providing a current path and the efficiency is increased. A prototype was built and tested to verify the effectiveness of the converter. The proposed converter has a maximum efficiency of 98%, less than 5.14 Vp.pof output voltage ripple, and less than 7.12 Ap.pof output current ripple. These results were obtained at an input voltage of 160 V, switching frequency of 45 kHz, output voltage of 80-320 V, and output power of 16-160 W. The experimental results show that the proposed converter has improved performance compared to the conventional converter.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“First, the increased number of components leads to a larger overall size and higher manufacturing costs [42].”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [42]
In the citing paper
“Coupled inductor technology was initially introduced in unidirectional ´ Cuk converters to reduce input and output current ripple, which enhances circuit performance and efficiency [42].”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [42]
In the citing paper
“More specifically, the bidirectional Buck-Boost converter operates in the forward mode by stepping the input voltage either up or down to the desired output voltage [42].”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [42]
Citations
Cites
Energy Storage Systems for Transport and Grid Applications
Vazquez, S., Lukic, S. M., Galvan, E., Franquelo, L. G., & Carrasco, J. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2076414 · Cited by 1,347
A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles
Tremblay, O., Dessaint, L.-A., & Dekkiche, A.-I. (2007) · 2007 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2007.4544139 · Cited by 1,244
Liu, X., Aichhorn, A., Liu, L., & Li, H. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2177501 · Cited by 486
Building Integrated Photovoltaic System With Energy Storage and Smart Grid Communication
Sechilariu, M., Wang, B., & Locment, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2222852 · Cited by 332
Design and Analysis of a Full-Bridge LLC-Based PEV Charger Optimized for Wide Battery Voltage Range
Wang, H., Dusmez, S., & Khaligh, A. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2288772 · Cited by 293
A Novel Low-Loss Modulation Strategy for High-Power Bidirectional Buck ${\bm +}$ Boost Converters
Waffler, S., & Kolar, J. W. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2015881 · Cited by 276
Analysis and Implementation of a Novel Bidirectional DC–DC Converter
Yang, L.-S., & Liang, T.-J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134060 · Cited by 261
A stand-alone photovoltaic supercapacitor battery hybrid energy storage system
Glavin, M. E., Chan, P. K. W., Armstrong, S., & Hurley, W. G. (2008) · 2008 13th International Power Electronics and Motion Control Conference · doi:10.1109/epepemc.2008.4635510 · Cited by 259
Power Electronics, Smart Grid, and Renewable Energy Systems
Bose, B. K. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2745621 · Cited by 242 · cited 1×
“Therefore, an energy storage system (ESS) is needed in a smart grid to provide stability and efficiently manage the renewable energy [1-3].”
BackgroundSwitching Power Supplies A - Z
(2012) · Elsevier eBooks · doi:10.1016/c2010-0-68564-6 · Cited by 215
Caricchi, F., Crescimbini, F., Capponi, F. G., & Solero, L. (2002) · APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1998.647705 · Cited by 206
Evaluation of MPP Voltage and Power of mc-Si PV Modules in Partial Shading Conditions
Paraskevadaki, E. V., & Papathanassiou, S. A. (2011) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2126021 · Cited by 164
Residential Demand Response for Renewable Energy Resources in Smart Grid Systems
Park, L., Jang, Y., Cho, S., & Kim, J. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2704282 · Cited by 146
Lee, Y.-J., Khaligh, A., Chakraborty, A., & Emadi, A. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014066 · Cited by 125
Nonisolated Bidirectional Zero-Voltage-Switching DC–DC Converter
Do, H.-L. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2111387 · Cited by 107
A method for modeling the current–voltage curve of a PV module for outdoor conditions
Marion, B. (2002) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.403 · Cited by 102
Analysis of dual-carrier modulator for bidirectional noninverting buck–boost converter
Aharon, I., Kuperman, A., & Shmilovitz, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2315993 · Cited by 97 · cited 2×
“2(c)) were introduced for use in cases of overlapping input and output voltages [19-28].”
BackgroundMethodCaricchi, F., Crescimbini, F., & Napoli, A. D. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1995.469045 · Cited by 71
A Bidirectional Multilevel Boost–Buck DC–DC Converter
Busquets-Monge, S., Alepuz, S., & Bordonau, J. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2105508 · Cited by 71
Jones, D. C., & Erickson, R. W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2198924 · Cited by 56
Family of non-isolated zero current transition bi-directional converters with one auxiliary switch
Ahmadi, M., Mohammadi, M. R., Adib, E., & Farzanehfard, H. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2011.0098 · Cited by 53
A simple model of photovoltaic module electric characteristics
Boke, U. (2007) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417572 · Cited by 53
Khan, M. A., Husain, I., & Sozer, Y. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2305157 · Cited by 50
A new adaptive switching frequency modulation for optimizing low power cascaded buck-boost converter
Chen, X., Pise, A. A., Batarseh, I. E., & Elmes, J. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096732 · Cited by 19
On a battery/supercapacitor powered SRM drive for EV with integrated on-board charger
He, J., Hu, K., & Liaw, C. M. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125491 · Cited by 14
Performance Improvement of a Bidirectional DC-DC Converter for Battery Chargers using an LCLC Filter
Moon, S.-H., Jou, S.-T., & Lee, K. (2015) · Journal of Electrical Engineering and Technology · doi:10.5370/jeet.2015.10.2.560 · Cited by 10
Design and implementation of a high-efficiency bidirectional DC-DC converter
Young, C., Cheng, Y.-S., Peng, B., Chi, S.-H., & Yang, Z.-Z. (2015) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec.2015.7361611 · Cited by 8
A study of grid-connected PV-AC module with active power decoupling and ESS
Won, D.-J., Noh, Y.-S., Ryu, M.-Y., Won, C.-Y., & Lim, H.-W. (2014) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2014.6894989 · Cited by 5
Zhang, X., Chen, W., & Lü, Z. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592428 · Cited by 4
Research works printed but not linked: 4
- ridley, 2016, Magnetics core loss, Lecture Ridley Engineering
- wen, 2014, Analysis of buck converter efficiency, Application Note Richtek Technology
- lim, 2017, Nonisolated two-phase bidirectional DC-DC converter with zero-voltage-transition for battery energy storage system, J Elect Eng Technol, 12, 2237
- du, 0, Review of nonisolated bi-directional DC–DC converters for plug-in hybrid electric vehicle charge station application at municipal parking decks, Proc IEEE Appl Power Electron Conf, 1145
Cited by
Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
A Novel SiC-Based Multifunctional Onboard Battery Charger for Plug-In Electric Vehicles
Nguyen, H. V., Lee, D., & Blaabjerg, F. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3026034 · Cited by 115
Alatai, S., Salem, M., Ishak, D., Das, H. S., Nazari, M. A., Bughneda, A., & Jamil, M. K. M. (2021) · Applied Sciences · doi:10.3390/app112110172 · Cited by 129
Overview of Technical Specifications for Grid-Connected Microgrid Battery Energy Storage Systems
Khalid, A., Stevenson, A., & Sarwat, A. I. (2021) · IEEE Access · doi:10.1109/access.2021.3132223 · Cited by 114
Pires, V. F., Cordeiro, A., Foito, D., & Silva, J. F. (2021) · IEEE Access · doi:10.1109/access.2021.3122877 · Cited by 95
Metadata
- Authors
- Lee, H.-S., & Yun, J.-J.
- Affiliations
- Pohang University of Science and Technology (KR)
- Daegu University (KR)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-05
- Volume
- 34
- Issue
- 5
- Pages
- 4316-4328
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2883184743
- Cited by
- 123
- References
- 31
- Citations by year
- 2026: 9 · 2025: 16 · 2024: 26 · 2023: 21 · 2022: 17 · 2021: 21 · 2020: 9 · 2019: 4
- FWCI
- 3.25
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Funders
- National Research Foundation of Korea
- Ministry of Science, ICT and Future Planning (2015R1c1A1a01056107)
- Korea Electric Power Corporation (R17XA05-15)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Keywords
- bidirectional buck-boost converter, photovoltaic systems, energy storage systems, smart grid, discontinuous conduction mode, zero-voltage switching, output current ripple reduction, power conversion efficiency, auxiliary capacitor
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.