The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Deep Generative Design: Integration of Topology Optimization and Generative Models
Open accessAbstract
Deep learning has recently been applied to various research areas of design optimization. This study presents the need and effectiveness of adopting deep learning for generative design (or design exploration) research area. This work proposes an artificial intelligent (AI)-based deep generative design framework that is capable of generating numerous design options which are not only aesthetic but also optimized for engineering performance. The proposed framework integrates topology optimization and generative models (e.g., generative adversarial networks (GANs)) in an iterative manner to explore new design options, thus generating a large number of designs starting from limited previous design data. In addition, anomaly detection can evaluate the novelty of generated designs, thus helping designers choose among design options. The 2D wheel design problem is applied as a case study for validation of the proposed framework. The framework manifests better aesthetics, diversity, and robustness of generated designs than previous generative design methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Very Deep Convolutional Networks for Large-Scale Image Recognition
Simonyan, K., & Zisserman, A. (2014) · arXiv · doi:10.48550/arxiv.1409.1556 · Cited by 114,148
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Labaca-Castro, R. (2023) · Machine Learning under Malware Attack · doi:10.1007/978-3-658-40442-0_9 · Cited by 19,272
GAN(Generative Adversarial Nets)
(2017) · Journal of Japan Society for Fuzzy Theory and Intelligent Informatics · doi:10.3156/jsoft.29.5_177_2 · Cited by 19,270
Unsupervised representation learning with deep convolutional generative adversarial networks
Radford, A., Metz, L., & Chintala, S. (2015) · arXiv · doi:10.48550/arxiv.1511.06434 · Cited by 12,235
(2016) · Cited by 11,679
Conditional Generative Adversarial Nets
Mirza, M., & Osindero, S. (2014) · arXiv · doi:10.48550/arxiv.1411.1784 · Cited by 8,863
GANs Trained by a Two Time-Scale Update Rule Converge to a Local Nash Equilibrium
Heusel, M., Ramsauer, H., Unterthiner, T., Nessler, B., & Hochreiter, S. (2017) · arXiv · doi:10.48550/arxiv.1706.08500 · Cited by 8,365
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
A 99 line topology optimization code written in Matlab
Sigmund, O. (2001) · Structural and Multidisciplinary Optimization · doi:10.1007/s001580050176 · Cited by 2,688
Arjovsky, M., Chintala, S., & Bottou, L. (2017) · arXiv · doi:10.48550/arxiv.1701.07875 · Cited by 2,225
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Morphology-based black and white filters for topology optimization
Sigmund, O. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-006-0087-x · Cited by 1,727
Efficient topology optimization in MATLAB using 88 lines of code
Andreassen, E., Clausen, A., Schevenels, M., Lazarov, B. S., & Sigmund, O. (2010) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0594-7 · Cited by 1,710
Anomaly Detection Using Autoencoders with Nonlinear Dimensionality Reduction
Sakurada, M., & Yairi, T. (2014) · Proceedings of the MLSDA 2014 2nd Workshop on Machine Learning for Sensory Data Analysis · doi:10.1145/2689746.2689747 · Cited by 1,438
Topology optimization of non-linear elastic structures and compliant mechanisms
Bruns, T. E., & Tortorelli, D. A. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(00)00278-4 · Cited by 1,385
On the Design of Compliant Mechanisms Using Topology Optimization*
Sigmund, O. (1997) · Mechanics of Structures and Machines · doi:10.1080/08905459708945415 · Cited by 1,384
Guest, J. K., Prévost, J. H., & Belytschko, T. (2004) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1064 · Cited by 1,300
Filters in topology optimization
Bourdin, B. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.116 · Cited by 1,221
InfoGAN: Interpretable Representation Learning by Information Maximizing Generative Adversarial Nets
Chen, X., Duan, Y., Houthooft, R., Schulman, J., Sutskever, I., & Abbeel, P. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1606.03657 · Cited by 1,156
Energy-based Generative Adversarial Network
Zhao, J., Mathieu, M., & LeCun, Y. (2016) · arXiv · doi:10.48550/arxiv.1609.03126 · Cited by 912 · cited 1×
“From this point of view, an autoencoder architecture is used for the discriminator [44].”
MethodConvolutional Neural Networks for Steady Flow Approximation
Guo, X., Li, W., & Iorio, F. (2016) · Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining · doi:10.1145/2939672.2939738 · Cited by 702
BEGAN: Boundary Equilibrium Generative Adversarial Networks
Berthelot, D., Schumm, T., & Metz, L. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1703.10717 · Cited by 654
Donahue, J., Krähenbühl, P., & Darrell, T. J. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1605.09782 · Cited by 616
Adversarially Learned Inference
Dumoulin, V., Belghazi, M. I., Poole, B., Mastropietro, O., Lamb, A., Arjovsky, M., & Courville, A. C. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1606.00704 · Cited by 579
A practical generative design method
Krish, S. (2011) · Computer-Aided Design · doi:10.1016/j.cad.2010.09.009 · Cited by 446
Volume preserving nonlinear density filter based on heaviside functions
Xu, S., Cai, Y., & Cheng, G. (2010) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-009-0452-7 · Cited by 426
Deep learning for determining a near-optimal topological design without any iteration
Yu, Y., Hur, T., Jung, J., & Jang, I. G. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-2101-5 · Cited by 353
Towards integrated performance-driven generative design tools
Shea, K., Aish, R., & Gourtovaia, M. (2005) · Automation in Construction · doi:10.1016/j.autcon.2004.07.002 · Cited by 341
CausalGAN: Learning Causal Implicit Generative Models with Adversarial TrainingPreprint
Kocaoglu, M., Snyder, C., Dimakis, A. G., & Vishwanath, S. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1709.02023 · Cited by 314
Neural networks for topology optimization
Sosnovik, I., & Oseledets, I. (2019) · Russian Journal of Numerical Analysis and Mathematical Modelling · doi:10.1515/rnam-2019-0018 · Cited by 302
Accelerating Eulerian Fluid Simulation With Convolutional Networks
Tompson, J., Schlachter, K., Sprechmann, P., & Perlin, K. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1607.03597 · Cited by 280
Microstructural Materials Design Via Deep Adversarial Learning Methodology
Yang, Z., Li, X., Catherine Brinson, L., Choudhary, A. N., Chen, W., & Agrawal, A. (2018) · Journal of Mechanical Design · doi:10.1115/1.4041371 · Cited by 235
Cang, R., Li, H., Yao, H., Jiao, Y., & Ren, Y. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.03.074 · Cited by 217
Cang, R., Xu, Y., Chen, S., Liu, Y., Jiao, Y., & Yi Ren, M. (2017) · Journal of Mechanical Design · doi:10.1115/1.4036649 · Cited by 188
3D Topology Optimization using Convolutional Neural NetworksPreprint
Banga, S., Gehani, H., Bhilare, S., Patel, S., & Kara, L. B. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1808.07440 · Cited by 155
Deep Learning the Physics of Transport PhenomenaPreprint
Farimani, A. B., Gomes, J., & Pande, V. S. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1709.02432 · Cited by 144
Dream Lens: Exploration and Visualization of Large-Scale Generative Design Datasets
Matejka, J., Glueck, M., Bradner, E., Hashemi, A., Grossman, T., & Fitzmaurice, G. (2018) · Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems · doi:10.1145/3173574.3173943 · Cited by 144
Guo, T., Lohan, D. J., Cang, R., Ren, M. Y., & Allison, J. T. (2018) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2018-0804 · Cited by 96
Generative Design: What it is? How is it being used? Why it’s a game changer
McKnight, M. (2017) · KnE Engineering · doi:10.18502/keg.v2i2.612 · Cited by 82
Estimating and Exploring the Product Form Design Space Using Deep Generative Models
Burnap, A., Liu, Y., Pan, Y., Lee, H., Gonzalez, R., & Papalambros, P. Y. (2016) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2016-60091 · Cited by 78
One-shot generation of near-optimal topology through theory-driven machine learning
Cang, R., Yao, H., & Ren, Y. (2019) · Computer-Aided Design · doi:10.1016/j.cad.2018.12.008 · Cited by 75
Design Automation by Integrating Generative Adversarial Networks and Topology Optimization
Oh, S., Jung, Y., Lee, I., & Kang, N. (2018) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2018-85506 · Cited by 59
Self-citationImproving Design Preference Prediction Accuracy Using Feature Learning
Burnap, A., Pan, Y., Liu, Y., Ren, Y., Lee, H., Gonzalez, R., & Papalambros, P. Y. (2016) · Journal of Mechanical Design · doi:10.1115/1.4033427 · Cited by 42
A Convolutional Neural Network Model for Predicting a Product's Function, Given Its Form
Dering, M. L., & Tucker, C. S. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037309 · Cited by 38
Deep Design: Product Aesthetics for Heterogeneous Markets
Pan, Y., Burnap, A., Hartley, J., Gonzalez, R., & Papalambros, P. Y. (2017) · ACM SIGKDD Conference on Knowledge Discovery and Data Mining (KDD) · doi:10.1145/3097983.3098176 · Cited by 29
Multidomain Demand Modeling in Design for Market Systems.
Kang, N. (2014) · Deep Blue (University of Michigan) · Cited by 10
Self-citationVertolli, M. O., & Davies, J. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1708.02237 · Cited by 9
Cited by
Artificial intelligence and machine learning in design of mechanical materials
Guo, K., Yang, Z., Yu, C.-H., & Buehler, M. J. (2021) · Materials Horizons · doi:10.1039/d0mh01451f · Cited by 735
Deep Generative Models in Engineering Design: A Review
Regenwetter, L., Nobari, A. H., & Ahmed, F. (2022) · Journal of Mechanical Design · doi:10.1115/1.4053859 · Cited by 356
Elahi, M., Afolaranmi, S. O., Martinez Lastra, J. L., & Perez Garcia, J. A. (2023) · Discover Artificial Intelligence · doi:10.1007/s44163-023-00089-x · Cited by 303
Design for additive manufacturing: Framework and methodology
Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.05.006 · Cited by 289
Generative AI design for building structures
Liao, W., Lu, X., Fei, Y., Gu, Y., & Huang, Y. (2024) · Automation in Construction · doi:10.1016/j.autcon.2023.105187 · Cited by 213
Metadata
- Authors
- Oh, S., Jung, Y., Kim, S., Lee, I., & Kang, N.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 2019-09-16
- Volume
- 141
- Issue
- 11
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W2961923021
- Cited by
- 449
- References
- 50
- FWCI
- 27.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.