The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Nanoimprint lithography: An old story in modern times? A review
Open accessAbstract
Nanoimprint lithography (NIL) is a high throughput, high-resolution parallel patterning method in which a surface pattern of a stamp is replicated into a material by mechanical contact and three dimensional material displacement. This can be done by shaping a liquid followed by a curing process for hardening, by variation of the thermomechanical properties of a film by heating and cooling, or by any other kind of shaping process using the difference in hardness of a mold and a moldable material. The local thickness contrast of the resulting thin molded film can be used as a means to pattern an underlying substrate on wafer level by standard pattern transfer methods, but also directly in applications where a bulk modified functional layer is needed. Therefore it is mainly aimed toward fields in which electron beam and high-end photolithography are costly and do not provide sufficient resolution at reasonable throughput. The aim of this review is to play between two poles: the need to establish standard processes and tools for research and industry, and the issues that make NIL a scientific endeavor. It is not the author’s intention to duplicate the content of the reviews already published, but to look on the NIL process as a whole. The author will also address some issues, which are not covered by the other reviews, e.g., the origin of NIL and the misconceptions, which sometimes dominate the debate about problems of NIL, and guide the reader to issues, which are often forgotten or overlooked.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588605 · Cited by 1,729
Sub-10 nm imprint lithography and applications
Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589752 · Cited by 1,113
Review on micro molding of thermoplastic polymers
Heckele, M., & Schomburg, W. K. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/3/r01 · Cited by 915
The glass transition in thin polymer films
Forrest, J. A., & Dalnoki-Veress, K. (2001) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(01)00060-4 · Cited by 829
A Long Pollen Record from Lowland Amazonia: Forest and Cooling in Glacial Times
Colinvaux, P. A., De Oliveira, P. E., Moreno, J. E., Miller, M. C., & Bush, M. B. (1996) · Science · doi:10.1126/science.274.5284.85 · Cited by 796
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Mold-assisted nanolithography: A process for reliable pattern replication
Haisma, J., Verheijen, M., van den Heuvel, K., & van den Berg, J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588604 · Cited by 659
Fabrication of 5nm linewidth and 14nm pitch features by nanoimprint lithography
Austin, M. D., Ge, H., Wu, W., Li, M., Yu, Z., Wasserman, D., Lyon, S. A., & Chou, S. Y. (2004) · Applied Physics Letters · doi:10.1063/1.1766071 · Cited by 613
Springer Handbook of Nanotechnology
(2007) · Springer eBooks · doi:10.1007/978-3-540-29857-1 · Cited by 592
Step and flash imprint lithography: a new approach to high-resolution patterning
Colburn, M., Johnson, S. C., Stewart, M. D., Damle, S., Bailey, T. C., Choi, B., Wedlake, M., Michaelson, T. B., Sreenivasan, S. V., Ekerdt, J. G., et al. (1999) · SPIE Proceedings · doi:10.1117/12.351155 · Cited by 571
Adhesion and stiction: Mechanisms, measurement techniques, and methods for reduction
Bhushan, B. (2003) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.1627336 · Cited by 483
Printing meets lithography: Soft approaches to high-resolution patterning
Michel, B., Bernard, A., Bietsch, A., Delamarche, E., Geissler, M., Juncker, D., Kind, H., Renault, J.-P., Rothuizen, H., Schmid, H., et al. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.455.0697 · Cited by 471
Srinivasan, U., Houston, M. R., Howe, R. T., & Maboudian, R. (1998) · Journal of Microelectromechanical Systems · doi:10.1109/84.679393 · Cited by 422
Polymer Imprint Lithography with Molecular-Scale Resolution
Hua, F., Sun, Y., Gaur, A., Meitl, M. A., Bilhaut, L., Rotkina, L., Wang, J., Geil, P., Shim, M., Rogers, J. A., et al. (2004) · Nano Letters · doi:10.1021/nl048355u · Cited by 413
Burton, Z., & Bhushan, B. (2005) · Nano Letters · doi:10.1021/nl050861b · Cited by 393
Siegel, R. W., Hu, E., Cox, D. M., Goronkin, H., Jelinski, L., Koch, C. C., Mendel, J., Roco, M. C., & Shaw, D. T. (1999) · Springer eBooks · doi:10.1007/978-94-015-9185-0 · Cited by 380
(1997) · CRC Press eBooks · doi:10.1201/9781482272802 · Cited by 346
Roller nanoimprint lithography
Tan, H., Gilbertson, A., & Chou, S. Y. (1998) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.590438 · Cited by 317
Defect analysis in thermal nanoimprint lithography
Hirai, Y., Yoshida, S., & Takagi, N. (2003) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1629289 · Cited by 175
Reversal imprinting by transferring polymer from mold to substrate
Huang, X. D., Bao, L.-R., Cheng, X., Guo, L. J., Pang, S. W., & Yee, A. F. (2002) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1523404 · Cited by 147
Hot embossing in microfabrication. Part II: Rheological characterization and process analysis
Juang, Y., Lee, L. J., & Koelling, K. W. (2002) · Polymer Engineering and Science · doi:10.1002/pen.10971 · Cited by 122
Sub-20-nm Alignment in Nanoimprint Lithography Using Moiré Fringe
Li, N., Wu, W., & Chou, S. Y. (2006) · Nano Letters · doi:10.1021/nl0603395 · Cited by 121
Arrays of nano-dots for cellular engineering
Gadegaard, N., Thoms, S., MacIntyre, D. S., McGhee, K. F., Gallagher, J. O., Casey, B., & Wilkinson, C. D. W. (2003) · Microelectronic Engineering · doi:10.1016/s0167-9317(03)00067-4 · Cited by 100
High‐Resolution Nanoimprinting with a Robust and Reusable Polymer Mold
Barbero, D. R., Saifullah, M. S. M., Hoffmann, P., Mathieu, H. J., Anderson, D. V., Jones, G. A., Welland, M. E., & Steiner, U. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600710 · Cited by 94
Multilayer resist methods for nanoimprint lithography on nonflat surfaces
Sun, X., Zhuang, L., Zhang, W., & Chou, S. Y. (1998) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.590437 · Cited by 90
Schift, H., Jaszewski, R. W., Dávid, C., et al. (1999) · Microelectronic Engineering · doi:10.1016/s0167-9317(99)00030-1 · Cited by 83
Self-citationNanoembossing of thermoplastic polymers for microfluidic applications
Studer, V., Pépin, A., & Chen, Y. (2002) · Applied Physics Letters · doi:10.1063/1.1479202 · Cited by 82
Characterization and application of a UV-based imprint technique
Otto, M., Bender, M., Hadam, B., Spangenberg, B., & Kurz, H. (2001) · Microelectronic Engineering · doi:10.1016/s0167-9317(01)00536-6 · Cited by 79
Why optical lithography will live forever
Brunner, T. A. (2003) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1619954 · Cited by 71
Materials for step and flash imprint lithography (S-FIL®)
Long, B. K., Keitz, B. K., & Willson, C. G. (2007) · Journal of Materials Chemistry · doi:10.1039/b705388f · Cited by 69
Flow behavior at the embossing stage of nanoimprint lithography
Jeong, J., Choi, Y.-S., Shin, Y.-J., Lee, J., Park, K.-T., Lee, E.-S., & Lee, S. (2002) · Fibers and Polymers · doi:10.1007/bf02892627 · Cited by 61
Mechanical Properties of Poly-methyl methacrylate (PMMA) for Nano Imprint Lithography
Hirai, Y., Yoshikawa, T., Takagi, N., et al. (2003) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.16.615 · Cited by 55
Nomura, S., Kojima, H., Ohyabu, Y., Kuwabara, K., Miyauchi, A., & Uemura, T. (2006) · Journal of Artificial Organs · doi:10.1007/s10047-006-0329-0 · Cited by 40
Siloxane Copolymers for Nanoimprint Lithography
Choi, P. Y., Fu, P. F., & Guo, L. J. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600257 · Cited by 40
Light from Si via dislocation loops
Homewood, K. P., & Lourenco, M. A. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00677-7 · Cited by 37
Coarse-grain method for modeling of stamp and substrate deformation in nanoimprint
Sirotkin, V. V., Svintsov, A. A., Schift, H., et al. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.007 · Cited by 24
Self-citationBioMEMS and Biomedical Nanotechnology
Ferrari, M., Lee, L. J., & Lee, L. J. (2006) · Springer eBooks · doi:10.1007/b136237 · Cited by 24
Liao, W., & Hsu, S. L. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/6/065303 · Cited by 22
Step-and-Repeat Photo-Nanoimprint System Using Active Orientation Head
Hiroshima, H., Komuro, M., Kurashima, Y., et al. (2004) · Japanese Journal of Applied Physics · doi:10.1143/jjap.43.4012 · Cited by 15
Cited by
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Block copolymer based nanostructures: Materials, processes, and applications to electronics
Kim, H.-C., Park, S.-M., & Hinsberg, W. D. (2010) · Chemical Reviews · doi:10.1021/cr900159v · Cited by 1,017
Cantilever-like micromechanical sensors
Boisen, A., Dohn, S., Keller, S. S., Schmid, S., & Tenje, M. (2011) · Reports on Progress in Physics · doi:10.1088/0034-4885/74/3/036101 · Cited by 566
Natural and bioinspired nanostructured bactericidal surfaces
Tripathy, A., Sen, P., Su, B., & Briscoe, W. H. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.07.030 · Cited by 510
Degradable thermosets based on labile bonds or linkages: A review
Ma, S., & Webster, D. C. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.07.008 · Cited by 449
Metadata
- Authors
- Schift, H.
- Venue
- Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 2008-03-01
- Volume
- 26
- Issue
- 2
- Pages
- 458-480
- ISSN
- 1071-1023 (ISSN-L)
- 1520-8567
- OpenAlex
- W2068276297
- Cited by
- 726
- References
- 41
- FWCI
- 35.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.