The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Sub-10 nm imprint lithography and applications
Abstract
New developments, further details, and applications of imprint lithography are presented. Arrays of 10 nm diameter and 40 nm period holes were imprinted not only in polymethylmethacrylate (PMMA) on silicon, but also in PMMA on gold substrates. The smallest hole diameter imprinted in PMMA is 6 nm. All the PMMA patterns were transferred to a metal using a liftoff. In addition, PMMA mesa’s of a size from 45 nm to 50 μm were obtained in a single imprint. Moreover, imprint lithography was used to fabricate the silicon quantum dot, wire, and ring transistors, which showed the same behavior as those fabricated using electron (e)-beam lithography. Finally, imprint lithography was used to fabricate nanocompact disks with 10 nm features and 400 Gbits/in.2 data density—near three orders of magnitude higher than current critical dimensions (CDs). A silicon scanning probe was used to read back the data successfully. The study of wear indicates that due to the ultrasmall force in tapping mode, both the nano-CD and the scanning probe will not show noticeable wear after a large number of scans.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Self-citationImprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
Self-citationLyding, J. W., Shen, T.-C., Hubacek, J. S., Tucker, J. R., & Abeln, G. C. (1994) · Applied Physics Letters · doi:10.1063/1.111722 · Cited by 489
Imprint lithography with sub-10 nm feature size and high throughput
Chou, S. Y., & Krauss, P. R. (1997) · Microelectronic Engineering · doi:10.1016/s0167-9317(96)00097-4 · Cited by 372
Self-citationReplication of 175-Å lines and spaces in polymethylmethacrylate using x-ray lithography
Flanders, D. C. (1980) · Applied Physics Letters · doi:10.1063/1.91287 · Cited by 72
Cited by
Nanostructured Plasmonic Sensors
Stewart, M. E., Anderton, C. R., Thompson, L. B., Maria, J., Gray, S. K., Rogers, J. A., & Nuzzo, R. G. (2008) · Chemical Reviews · doi:10.1021/cr068126n · Cited by 2,415
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Self-citationMolecular Rulers for Scaling Down Nanostructures
Hatzor, A., & Weiss, P. S. (2001) · Science · doi:10.1126/science.1057553 · Cited by 1,681
One-Dimensional Titanium Dioxide Nanomaterials: Nanotubes
Lee, K., Mazare, A., & Schmuki, P. (2014) · Chemical Reviews · doi:10.1021/cr500061m · Cited by 1,185
Metadata
- Authors
- Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L.
- Venue
- Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 1997-11-01
- Volume
- 15
- Issue
- 6
- Pages
- 2897-2904
- ISSN
- 1071-1023 (ISSN-L)
- 1520-8567
- OpenAlex
- W2005485153
- Cited by
- 1,113
- References
- 5
- FWCI
- 15.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.