The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Sub-10 nm imprint lithography and applications
Abstract
New developments, further details, and applications of imprint lithography are presented. Arrays of 10 nm diameter and 40 nm period holes were imprinted not only in polymethylmethacrylate (PMMA) on silicon, but also in PMMA on gold substrates. The smallest hole diameter imprinted in PMMA is 6 nm. All the PMMA patterns were transferred to a metal using a liftoff. In addition, PMMA mesa’s of a size from 45 nm to 50 μm were obtained in a single imprint. Moreover, imprint lithography was used to fabricate the silicon quantum dot, wire, and ring transistors, which showed the same behavior as those fabricated using electron (e)-beam lithography. Finally, imprint lithography was used to fabricate nanocompact disks with 10 nm features and 400 Gbits/in.2 data density—near three orders of magnitude higher than current critical dimensions (CDs). A silicon scanning probe was used to read back the data successfully. The study of wear indicates that due to the ultrasmall force in tapping mode, both the nano-CD and the scanning probe will not show noticeable wear after a large number of scans.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Self-citationImprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
Self-citationLyding, J. W., Shen, T.-C., Hubacek, J. S., Tucker, J. R., & Abeln, G. C. (1994) · Applied Physics Letters · doi:10.1063/1.111722 · Cited by 489
Imprint lithography with sub-10 nm feature size and high throughput
Chou, S. Y., & Krauss, P. R. (1997) · Microelectronic Engineering · doi:10.1016/s0167-9317(96)00097-4 · Cited by 372
Self-citationReplication of 175-Å lines and spaces in polymethylmethacrylate using x-ray lithography
Flanders, D. C. (1980) · Applied Physics Letters · doi:10.1063/1.91287 · Cited by 72
Cited by
Nanostructured Plasmonic Sensors
Stewart, M. E., Anderton, C. R., Thompson, L. B., Maria, J., Gray, S. K., Rogers, J. A., & Nuzzo, R. G. (2008) · Chemical Reviews · doi:10.1021/cr068126n · Cited by 2,415
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Self-citationMolecular Rulers for Scaling Down Nanostructures
Hatzor, A., & Weiss, P. S. (2001) · Science · doi:10.1126/science.1057553 · Cited by 1,681
One-Dimensional Titanium Dioxide Nanomaterials: Nanotubes
Lee, K., Mazare, A., & Schmuki, P. (2014) · Chemical Reviews · doi:10.1021/cr500061m · Cited by 1,185
Patterning surfaces with functional polymers
Nie, Z., & Kumacheva, E. (2008) · Nature Materials · doi:10.1038/nmat2109 · Cited by 935
Ordered magnetic nanostructures: fabrication and properties
Martı́n, J. I., Nogués, J., Liu, K., Vicent, J. L., & Schuller, I. K. (2003) · Journal of Magnetism and Magnetic Materials · doi:10.1016/s0304-8853(02)00898-3 · Cited by 889
Polymer–fullerene bulk heterojunction solar cells
Deibel, C., & Dyakonov, V. (2010) · Reports on Progress in Physics · doi:10.1088/0034-4885/73/9/096401 · Cited by 825
Nanofabricated and self-assembled magnetic structures as data storage media
Terris, B. D., & Thomson, T. (2005) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/38/12/r01 · Cited by 800
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Self-citationNanoimprint lithography: An old story in modern times? A review
Schift, H. (2008) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2890972 · Cited by 726
Recent advances in designing superhydrophobic surfaces
Celia, E., Darmanin, T., Taffin de Givenchy, E., Amigoni, S., & Guittard, F. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.03.041 · Cited by 711
Fabrication of 5nm linewidth and 14nm pitch features by nanoimprint lithography
Austin, M. D., Ge, H., Wu, W., Li, M., Yu, Z., Wasserman, D., Lyon, S. A., & Chou, S. Y. (2004) · Applied Physics Letters · doi:10.1063/1.1766071 · Cited by 613
Self-citationViscoelastic Properties of Polymers: Relevance for Hot Embossing Lithography
Hoffmann, T. (2003) · Nanostructure Science and Technology · doi:10.1007/978-1-4419-9204-8_3 · Cited by 559
Technologies for nanofluidic systems: top-down vs. bottom-up—a review
Mijatovic, D., Eijkel, J. C. T., & van den Berg, A. (2005) · Lab on a Chip · doi:10.1039/b416951d · Cited by 509
Cell–Material Interactions Revealed Via Material Techniques of Surface Patterning
Yao, X., Peng, R., & Ding, J. (2013) · Advanced Materials · doi:10.1002/adma.201301762 · Cited by 501
Surface Modification of Polymers: Methods and Applications
Nemani, S. K., Annavarapu, R. K., Mohammadian, B., Raiyan, A., Heil, J., Haque, M. A., Abdelaal, A., & Sojoudi, H. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801247 · Cited by 484
Biochemical sensors based on polymer microrings with sharp asymmetrical resonance
Chao, C.-Y., & Guo, L. J. (2003) · Applied Physics Letters · doi:10.1063/1.1605261 · Cited by 470
Self-citationJung, Y. S., & Ross, C. A. (2007) · Nano Letters · doi:10.1021/nl070924l · Cited by 449
Polymer microring resonators for biochemical sensing applications
Chao, C.-Y., Fung, W., & Guo, L. J. (2006) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2005.862945 · Cited by 442
Self-citationLithography and Other Patterning Techniques for Future Electronics
Pease, R. F., & Chou, S. Y. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2007.911853 · Cited by 399
Self-citationArray-based architecture for FET-based, nanoscale electronics
DeHon, A. (2003) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2003.808508 · Cited by 375
UNCONVENTIONAL NANOFABRICATION
Gates, B. D., Xu, Q., Love, J. C., Wolfe, D. B., & Whitesides, G. M. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.052803.091100 · Cited by 324
Micro- and nanofluidics for DNA analysis
Tegenfeldt, J. O., Prinz, C., Huang, R. L., Austin, R. H., Chou, S. Y., Cox, E. C., Sturm, J. C., & Cao, H. (2004) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2526-0 · Cited by 320
Self-citationSemiconductor Nanowire Fabrication by Bottom-Up and Top-Down Paradigms
Hobbs, R. G., Petkov, N., & Holmes, J. D. (2012) · Chemistry of Materials · doi:10.1021/cm300570n · Cited by 320
Designer nanoparticles: incorporating size, shape and triggered release into nanoscale drug carriers
Caldorera-Moore, M., Guimard, N., Shi, L., & Roy, K. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425240903579971 · Cited by 304
Nanofabrication: Conventional and nonconventional methods
Chen, Y., & Pépin, A. (2001) · ELECTROPHORESIS · doi:10.1002/1522-2683(200101)22:2<187::aid-elps187>3.0.co;2-0 · Cited by 301
Axonal outgrowth on nano-imprinted patterns
Johansson, F., Carlberg, P., Danielsen, N., Montelius, L., & Kanje, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.047 · Cited by 300
Review of manufacturing processes for soft biomimetic robots
Cho, K.-J., Koh, J.-S., Kim, S., Chu, W.-S., Hong, Y., & Ahn, S.-H. (2009) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-009-0064-6 · Cited by 278
Entropically Driven Colloidal Crystallization on Patterned Surfaces
Lin, K.-H., Crocker, J. C., Prasad, V., Schofield, A., Weitz, D. A., Lubensky, T. C., & Yodh, A. G. (2000) · Physical Review Letters · doi:10.1103/physrevlett.85.1770 · Cited by 267
Biradar, M. R., Sagdic, G., Yuan, C., Marui, R., & Ober, C. K. (2026) · Chemical Reviews · doi:10.1021/acs.chemrev.5c01043 · Cited by 6
Metadata
- Authors
- Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L.
- Venue
- Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 1997-11-01
- Volume
- 15
- Issue
- 6
- Pages
- 2897-2904
- ISSN
- 1071-1023 (ISSN-L)
- 1520-8567
- OpenAlex
- W2005485153
- Cited by
- 1,113
- References
- 5
- FWCI
- 15.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.