Ultralight Metallic Microlattices
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
A route is developed for fabricating extremely low-density, hollow-strut metallic lattices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In corks microstructure, one‐dimensional (1D) nanofibers of cell walls intimately align in a highly oriented manner to reach reasonable strength.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“Further, an individual cell of tens of micrometers in size intricately connects with each other to produce a 3D honeycomb‐like architecture, which is helpful to maximize bulk superplastic modulus.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“In nature, corks have been recognized as one of the oldest materials exploited by human beings because of their exceptional mechanical robustness.[ 14 , 15 , 16 ]”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process
Tillotson, T. M., & Hrubesh, L. W. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80427-2 · Cited by 343
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
Research works printed but not linked: 1
- M. Chanda S. K. Roy Plastics Technology Handbook (CRC Press Boca Raton FL 2007).
Cited by
Items 401–500 of 1,001
Amendola, A., Carpentieri, G., Feo, L., & Fraternali, F. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.031 · Cited by 87
“It is seen that the 0 / E Ec and 0 / G Gc ratios vary with φ according to non-linear laws, which proves evidence of a bending-dominated response of the examined structures [18]-[20] (quadratic regressions of the FEM results are represented by solid lines in Figure 5).”
BackgroundMethodWu, Q., Gao, Y., Wei, X., Mousanezhad, D., Ma, L., Vaziri, A., & Xiong, J. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.09.024 · Cited by 87
Mechanisms of Failure in Nanoscale Metallic Glass
Gu, X. W., Jafary‐Zadeh, M., Chen, D. Z., Wu, Z., Zhang, Y., Srolovitz, D. J., & Greer, J. R. (2014) · Nano Letters · doi:10.1021/nl5027869 · Cited by 97
Self-citationUltralight Mesoporous Magnetic Frameworks by Interfacial Assembly of Prussian Blue Nanocubes
Kong, B., Tang, J., Wu, Z., Wei, J., Wu, H., Wang, Y., Zheng, G., & Zhao, D. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308625 · Cited by 86
Lei, Z., Liu, L., Zhao, H., Liang, F., Chang, S., Li, L., Zhang, Y., Lin, Z., Kröger, J., & Lei, Y. (2020) · Nature Communications · doi:10.1038/s41467-019-14170-6 · Cited by 86
Zhang, H., Zhou, H. R., Zhou, Z., Zeng, H., Zhang, X., Jian-zhong, Y., Lei, H., & Han, F. (2021) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2021.111082 · Cited by 94
Cheng, H., Zhu, X., Cheng, X., Cai, P., Liu, J., Yao, H., Zhang, L., & Duan, J. (2023) · Nature Communications · doi:10.1038/s41467-023-36965-4 · Cited by 86
Hassanieh, S. A., Alhantoobi, A., Khan, K. A., & Khan, M. (2021) · Polymers · doi:10.3390/polym13223882 · Cited by 85
“To fabricate these complex centimeter-scale-sized lattice structures, several additive manufacturing techniques have been developed, such as fused filament fabrication (FFF) [12], selective laser sintering (SLS), direct laser writing (DLW) [13–15], selective laser melting [16,17], and direct ink writing [18].”
Lightweight Liquid Metal Entity
Yuan, B., Zhao, C., Sun, X., & Liu, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910709 · Cited by 85
Enabling three-dimensional architected materials across length scales and timescales
Surjadi, J. U., & Portela, C. M. (2025) · Nature Materials · doi:10.1038/s41563-025-02119-8 · Cited by 84
“Despite this progress, most research has focused on the static properties of small, periodic-unit-cell tessellations that rely on additive manufacturing 3–8 , which has limited scalability and prevents accurate determination of application-critical properties such as fracture toughness 9 .”
InfluentialLaser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Small · doi:10.1002/smll.201500612 · Cited by 84
Topology optimization of energy absorbing structures with maximum damage constraint
Li, L., Zhang, G., & Khandelwal, K. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5531 · Cited by 84
Intrinsically Polar Elastic Metamaterials
Bilal, O. R., Süsstrunk, R., Daraio, C., & Huber, S. D. (2017) · Advanced Materials · doi:10.1002/adma.201700540 · Cited by 87
Chen, J., Xu, W., Wei, Z., Wei, K., & Yang, X. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106527 · Cited by 83
Design, fabrication and applications of soft network materials
Liu, J., Yan, D., Pang, W., & Zhang, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.05.007 · Cited by 84
Design and Fabrication of Hollow Rigid Nanolattices via Two‐ P hoton Lithography
Montemayor, L. C., Meza, L. R., & Greer, J. R. (2013) · Advanced Engineering Materials · doi:10.1002/adem.201300254 · Cited by 83
Self-citationHoneytubes: Hollow lattice truss reinforced honeycombs for crushing protection
Yin, S., Li, J., Liu, B., Meng, K., Huan, Y., Nutt, S., & Xu, J. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.11.007 · Cited by 83
Unconventional Janus Properties of Enokitake-like Gold Nanowire Films
Wang, Y., Gong, S. P., Gómez, D. E., Ling, Y., Yap, L. W., Simon, G. P., & Cheng, W. (2018) · ACS Nano · doi:10.1021/acsnano.8b04748 · Cited by 84
Su, X., Li, X., Ong, C. Y. A., Herng, T. S., Wang, Y., Peng, E., & Ding, J. (2019) · Advanced Science · doi:10.1002/advs.201801670 · Cited by 84
Maloney, K. J., Roper, C. S., Jacobsen, A. J., Carter, W. B., Valdevit, L., & Schaedler, T. A. (2013) · APL Materials · doi:10.1063/1.4818168 · Cited by 82
Self-citationHierarchically porous ceramics via direct writing of preceramic polymer-triblock copolymer inks
Bowen, J. J., Mooraj, S., Goodman, J. A., Peng, S., Street, D. P., Román‐Manso, B., Davidson, E., Martin, K. L., Rueschhoff, L. M., Schiffres, S. N., et al. (2022) · Materials Today · doi:10.1016/j.mattod.2022.07.002 · Cited by 82
Structural engineering of three-dimensional phononic crystals
Delpero, T., Stefan Schoenwald, A., Zemp, A., & Bergamini, A. (2015) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.10.033 · Cited by 82
Surface functionalization – a new functional dimension added to 3D printing
Jiang, P., Ji, Z., Wang, X., & Zhou, F. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc02850a · Cited by 82
Zhang, X., Yu, Q., Zhao, C., Shi, D., Geng, M., Zheng, J., Lü, T., & Wang, P. (2023) · Thin-Walled Structures · doi:10.1016/j.tws.2023.111498 · Cited by 81
Mechanical properties of copper octet-truss nanolattices
He, Z., Wang, F., Zhu, Y., Wu, H., & Park, H. S. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.01.019 · Cited by 81
“For example, metallic micro-lattices can recover under large compression strain and exhibit energy absorption capabilities similar to rubbery polymers like elastomers ( Schaedler et al., 2011 ).”
BackgroundTopology optimization for concurrent design of layer-wise graded lattice materials and structures
Zhang, H.-K., Wang, Y., & Kang, Z. (2019) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2019.01.006 · Cited by 84
Three-dimensional micro/nanoscale architectures: fabrication and applications
Xu, Q., Lv, Y., Dong, C., Sreenivasan, S. T., Tian, A., Zhang, H., Tang, Y., Yu, Z., & Li, N. (2015) · Nanoscale · doi:10.1039/c5nr02048d · Cited by 83
Wen, W., Wu, J., & Cao, M. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.07.002 · Cited by 84
Elastic architected materials with extreme damping capacity
Haghpanah, B., Shirazi, A., Salari‐Sharif, L., Izard, A. G., & Valdevit, L. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.09.014 · Cited by 80
Self-citationVibration Tests of 3D Printed Satellite Structure Made of Lattice Sandwich Panels
Zhang, X., Zhou, H. R., Shi, W., Zeng, F., Zeng, H., & Chen, G. (2018) · AIAA Journal · doi:10.2514/1.j057241 · Cited by 80
Design of self-supporting lattices for additive manufacturing
Zhou, H. R., Cao, X., Li, C., Zhang, X., Fan, H., Lei, H., & Fang, D. (2021) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2021.104298 · Cited by 80
Emerging acousto-mechanical metamaterials: From physics-guided design to coupling-driven performance
Li, Z., Wang, X., Wang, Z., Li, X., Yu, X., Ramakrishna, S., Lu, Y., & Li, C. (2025) · Materials Today · doi:10.1016/j.mattod.2025.06.029 · Cited by 79
Resilient aligned carbon nanotube/graphene sandwiches for robust mechanical energy storage
Tang, C., Zhang, Q., Zhao, M., Tian, G., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.05.005 · Cited by 79
Direct metal writing: Controlling the rheology through microstructure
Chen, W., Thornley, L., Coe, H. G., Tonneslan, S. J., Vericella, J. J., Zhu, C., Duoss, E. B., Hunt, R., Wight, M. J., Apelian, D., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4977555 · Cited by 83
High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties
Gao, L., Song, J. Y., Jiao, Z., Liao, W., Luan, J., Surjadi, J. U., Li, J., Zhang, H., Sun, D. B., Liu, C. T., et al. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700625 · Cited by 79
Toward Lighter, Stiffer Materials
Schaedler, T. A., Jacobsen, A. J., & Carter, W. B. (2013) · Science · doi:10.1126/science.1243996 · Cited by 79
Self-citationZhu, S., Tan, X., Wang, B., Chen, S., Hu, J., Ma, L., & Wu, L. (2019) · Extreme Mechanics Letters · doi:10.1016/j.eml.2019.100548 · Cited by 79
High-Sensitivity Measurement of Density by Magnetic Levitation
Nemiroski, A., Kumar, A. A., Soh, S., Harburg, D. V., Yu, H., & Whitesides, G. M. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.5b03918 · Cited by 78
Liu, Y., Wang, X. S., Xu, Y., Xue, Z., Zhang, Y., Ning, X., Cheng, X., Xue, Y., Lu, D., Zhang, Q., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1907732116 · Cited by 82
Liu, T., Mai, X., Chen, H., Ren, J., Liu, Z., Li, Y., Gao, L., Wang, N., Zhang, J., He, H., et al. (2018) · Nanoscale · doi:10.1039/c7nr09260a · Cited by 77
Additive manufactured semi-plate lattice materials with high stiffness, strength and toughness
Li, T., Jarrar, F. S., Al‐Rub, R. K. A., & Cantwell, W. J. (2021) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2021.111153 · Cited by 77
Chen, Y., Fan, D., Lyu, S., Li, G., Jiang, F., & Wang, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05085 · Cited by 77
From 1D electrospun nanofibers to advanced multifunctional fibrous 3D aerogels
Dilamian, M., Joghataei, M., Ashrafi, Z., Bohr, C., Mathur, S., & Maleki, H. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.100964 · Cited by 75
Compression behavior of strut-reinforced hierarchical lattice—Experiment and simulation
Wang, Z., Zhou, Y. Z., Wang, X., & Wei, K. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106749 · Cited by 76
Multifunctional protective aerogel with superelasticity over −196 to 500 °C
Liu, B., Cao, M., Zhang, Y., Wang, Y., & Zhao, H. (2022) · Nano Research · doi:10.1007/s12274-022-4699-2 · Cited by 76
From pixels to voxels: A mechanistic perspective on volumetric 3D-printing
Thijssen, Q., Toombs, J. T., Li, C. C., Taylor, H., & Vlierberghe, S. V. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101755 · Cited by 76
Zhao, Z., Wang, E. F., Yan, H., Kono, Y., Wen, B., Bai, L., Shi, F., Zhang, J., Kenney‐Benson, C., Park, C., et al. (2015) · Nature Communications · doi:10.1038/ncomms7212 · Cited by 76
Enhancing the tensile properties of EBM as-built thin parts: Effect of HIP and chemical etching
Persenot, T., Martin, G., Dendievel, R., Buffière, J., & Maire, É. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.01.035 · Cited by 76
Ultralow Thermal Conductivity and Mechanical Resilience of Architected Nanolattices
Dou, N. G., Jagt, R. A., Portela, C. M., Greer, J. R., & Minnich, A. J. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01191 · Cited by 76
Self-citationLozanovski, B., Downing, D., Tran, P., Shidid, D., Qian, M., Choong, P., Brandt, M., & Leary, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101092 · Cited by 76
Understanding Mechanical Response of Elastomeric Graphene Networks
Ni, N., Barg, S., García‐Tuñón, E., Perez, F. M., Miranda, M., Lu, C., Mattevi, C., & Saiz, E. (2015) · Scientific Reports · doi:10.1038/srep13712 · Cited by 78
Liu, W., Song, H., Wang, Z., Wang, J., & Huang, C. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108065 · Cited by 75
Folding at the Microscale: Enabling Multifunctional 3D Origami‐Architected Metamaterials
Lin, Z., Novelino, L. S., Wei, H., Alderete, N. A., Paulino, G. H., Espinosa, H. D., & Krishnaswamy, S. (2020) · Small · doi:10.1002/smll.202002229 · Cited by 75
Exploring the property space of periodic cellular structures based on crystal networks
Lumpe, T. S., & Stanković, T. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2003504118 · Cited by 85
“This results in the purposeful design of cellular structures with advanced macroscopic mechanical properties such as negative Poisson’s ratios (4, 5), excellent strength-toweight ratios (6, 7), and controlled instabilities (8, 9).”
BackgroundNoronha, J., Qian, M., Leary, M., Kyriakou, E., & Brandt, M. (2021) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100940 · Cited by 75
Altamimi, S., Lee, D.-W., Barsoum, I., Rowshan, R., Jasiuk, I., & Al‐Rub, R. K. A. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202101379 · Cited by 75
Imperfection‐Enabled Strengthening of Ultra‐Lightweight Lattice Materials
Ding, J., Ma, Q., Li, X., Zhang, L., Yang, H., Qu, S., Wang, M. Y., Zhai, W., Gao, H., & Song, X. (2024) · Advanced Science · doi:10.1002/advs.202402727 · Cited by 75
Hierarchical composite honeycombs
Zhao, L., Zheng, Q., Fan, H., & Jin, F. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.03.009 · Cited by 75
Zhang, W., Chen, J., Li, X., & Lü, Y. (2020) · Small · doi:10.1002/smll.202004190 · Cited by 75
Wang, Y., & Kang, Z. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.12.018 · Cited by 75
Multiscale modeling and optimization of the mechanics of hierarchical metamaterials
Kochmann, D. M., Hopkins, J. B., & Valdevit, L. (2019) · MRS Bulletin · doi:10.1557/mrs.2019.228 · Cited by 77
Self-citationZhang, X., Ni, X., He, M., Gao, Y., Li, C., Mo, X., Sun, G., & You, B. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00724b · Cited by 74
Broadband mechanical metamaterial absorber enabled by fused filament fabrication 3D printing
Lim, D. D., Park, J., Lee, J., Noh, D., Lee, J., Choi, J., & Choi, W. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102856 · Cited by 98
Yu, Z. Q., Savinov, R., Matura, M., Zhang, P., & Shi, J. (2025) · Thin-Walled Structures · doi:10.1016/j.tws.2025.113490 · Cited by 74
Stiff auxetics: Hierarchy as a route to stiff, strong lattice based auxetic meta-materials
Rayneau-Kirkhope, D. (2018) · Scientific Reports · doi:10.1038/s41598-018-30822-x · Cited by 74
Materials by design: Using architecture in material design to reach new property spaces
Montemayor, L. C., Chernow, V. F., & Greer, J. R. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.263 · Cited by 73
Self-citationDesign and mechanical properties of elastically isotropic trusses
Latture, R. M., Begley, M. R., & Zok, F. W. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.2 · Cited by 73
The extreme mechanics of micro- and nanoarchitected materials
Schwaiger, R., Meza, L. R., & Li, X. (2019) · MRS Bulletin · doi:10.1557/mrs.2019.230 · Cited by 73
Gröttrup, J., Paulowicz, I., Schuchardt, A., Kaidas, V., Kaps, S., Lupan, O. I., Adelung, R., & Mishra, Y. K. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.02.099 · Cited by 72
Zhao, W. D., Yue, C., Liu, L., Leng, J., & Liu, Y. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.116360 · Cited by 72
Computational discovery of microstructured composites with optimal stiffness-toughness trade-offs
Li, B., Deng, B., Shou, W., Oh, T.-H., Hu, Y., Luo, Y., Shi, L., & Matusik, W. (2024) · Science Advances · doi:10.1126/sciadv.adk4284 · Cited by 72
“Recent development in additive manufacturing allows materials to be arranged combinatorially in space, enabling designs that were impossible to physically realize before, including high-performance structural materials ( 8 – 10 ) and functional objects ( 7 , 11 ).”
BackgroundYang, L., Zhang, Y., Cai, W., Tan, J., Hansen, H., Wang, H., Chen, Y., Zhu, M., & Mu, J. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00906h · Cited by 77
Ultra-lightweight paper foams: processing and properties
Madani, A., Zeinoddini, S. S., Varahmi, S., Turnbull, H., Phillion, A. B., Olson, J. A., & Martinez, D. M. (2014) · Cellulose · doi:10.1007/s10570-014-0197-3 · Cited by 77
Xiang, C., Wang, C., Guo, R., Lan, J., Lin, S., Jiang, S., Lai, X., Zhang, Y., & Xiao, H. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2900-5 · Cited by 73
New insights into nickel-free superelastic titanium alloys for biomedical applications
Ramezannejad, A., Xu, W., Xiao, W. L., Fox, K. E., Liang, D., & Qian, M. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.100783 · Cited by 74
On the Competition for Ultimately Stiff and Strong Architected Materials
Andersen, M. N., Wang, F., & Sigmund, O. (2020) · Video Proceedings of Advanced Materials · doi:10.5185/vpoam.2021.02149 · Cited by 71
Kovachki, N., Liu, B., Sun, X., Zhou, H., Bhattacharya, K., Ortíz, M., & Stuart, A. M. (2021) · Mechanics of Materials · doi:10.1016/j.mechmat.2021.104156 · Cited by 71
“, size and shape of components, can be controlled by material manufacturing such as 3D printing at different length-scales [94, 78, 80].”
BackgroundEnergy dissipation and shock isolation using novel metamaterials
Ma, H., Wang, K., Zhao, H., Shi, W., Xue, J., Zhou, Y., Li, Q., Wang, G., & Yan, B. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107464 · Cited by 71
3D Nanomagnetism in Low Density Interconnected Nanowire Networks
Burks, E. C., Gilbert, D. A., Murray, P. D., Flores, C., Felter, T. E., Charnvanichborikarn, S., Kucheyev, S. O., Colvin, J. D., Yin, G., & Liu, K. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c04366 · Cited by 70
“org/uc/item/30h1593x Journal Nano letters, 21(1) ISSN 1530-6984 Authors Burks, Edward C Gilbert, Dustin A Murray, Peyton D et al.”
BackgroundCotton-derived bulk and fiber aerogels grafted with nitrogen-doped graphene
Wang, C., Li, Y., He, X., Ding, Y., Peng, Q., Zhao, W., Shi, E., Wu, S., & Cao, A. (2015) · Nanoscale · doi:10.1039/c5nr00996k · Cited by 70
Mesoscale design of multifunctional 3D graphene networks
Sherrell, P. C., & Mattevi, C. (2016) · Materials Today · doi:10.1016/j.mattod.2015.12.004 · Cited by 72
Wei, K., Wang, K., Cheng, X., Peng, Y. L., Li, M., & Yang, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.009 · Cited by 70
Wang, F., Wang, Y., Zhan, W., Yu, S., Zhong, W.-H. K., Sui, G., & Yang, X. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.082 · Cited by 69
“Generally, if the density of a material is less than 10 mg cm 3 [46], it can be regarded as a ultra-light material.”
BackgroundBiomass-derived tubular carbon materials: progress in synthesis and applications
Sun, J., Wu, Z., Ma, C., Xu, M., Luo, S., Li, W. H., & Liu, S. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02412d · Cited by 69
Dai, Z., Liu, L., Qi, X., Kuang, J., Wei, Y., Zhu, H., & Zhang, Z. (2016) · Scientific Reports · doi:10.1038/srep18930 · Cited by 72
Zhou, M., Hou, J., Guo, Z., Luo, C., Zeng, Y., Mou, S., Xiao, P., Zhong, A., Yuan, Q., Yang, J., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab52ea · Cited by 70
Hu, E., Seetoh, I. P., & Lai, C. Q. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107190 · Cited by 69
Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning
Weeks, R. D., Truby, R. L., Uzel, S. G. M., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202206958 · Cited by 70
Guo, X. Y., Li, X., Wang, E., Fuh, J. Y. H., Lu, W. F., & Zhai, W. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103792 · Cited by 68
Irshad, M. S., Arshad, N., Maqsood, G., Ahmed, I., Shakoor, B., Asghar, M. S., Ghazanfar, U., Lin, L., Shah, M. A. K. Y., Ahmed, I., et al. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101018 · Cited by 69
Stretch–bend-hybrid hierarchical composite pyramidal lattice cores
Yin, S., Wu, L., & Nutt, S. (2012) · Composite Structures · doi:10.1016/j.compstruct.2012.11.004 · Cited by 68
“In that work, the out-of-plane compressive strength of hollow CPL cores was reportedly about twice that of solid truss counterparts [6], and the specific strength surpassed that of the world’s lightest structures [10].”
BackgroundAbad, E. M. K., Arabnejad, S., & Pasini, D. (2012) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.08.003 · Cited by 68
“thermal insulation, sound resistance and shock energy damping, and thus to be of potential use in a broad range of applications, including battery electrodes, catalyst supports, vibration insulators, jet-engine nacelles, ultra lightweight sandwich panels, and biomedical implants [3–8].”
BackgroundDirect Laser Writing of Low‐Density Interdigitated Foams for Plasma Drive Shaping
Oakdale, J. S., Smith, R. F., Forien, J., Smith, W., Ali, S. J., Aji, L. B. B., Willey, T. M., Ye, J., van Buuren, T., Worthington, M. A., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702425 · Cited by 71
Multifunctional Polymer Nanocomposites Reinforced by 3D Continuous Ceramic Nanofillers
Ahn, C., Kim, S., Jung, J., Park, J., Kim, T., Lee, S. E., Jang, D., Hong, J., Han, S. M., & Jeon, S. (2018) · ACS Nano · doi:10.1021/acsnano.8b03264 · Cited by 68
Architected porous metals in electrochemical energy storage
Egorov, V., & O’Dwyer, C. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.011 · Cited by 67
“Metallic porous materials can exist in a variety of forms, such as foams, sponges, micro/nanolattices, micro/nanoarrays etc.[19-21, 23, 24] Structurally, porous materials can be categorized as stochastic (random) and ordered (mostly periodic, but aperiodic 3D-tiling is also possible), depending on the”
BackgroundMethod3D Laser Nanoprinting of Functional Materials
Liu, S., Hou, Z., Lin, L., Li, Z., & Sun, H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211280 · Cited by 66
Quasi-static energy absorption of hollow microlattice structures
Liu, Y., Schaedler, T. A., Jacobsen, A. J., & Chen, X. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.06.024 · Cited by 66
Self-citationTarantino, M. G., Zerhouni, O., & Danas, K. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.020 · Cited by 66
“This feature is in contrast with the periodicity of most of lattices and trusses composed of webs or trusses [9],[25].”
MethodResultYap, X. Y., Seetoh, I. P., Goh, W. L., Ye, P., Zhao, Y., Du, Z., Lai, C. Q., & Gan, C. L. (2020) · SSRN Electronic Journal · doi:10.2139/ssrn.3693594 · Cited by 66
Design, material, function, and fabrication of metamaterials
ZADPOOR, A. A., Mirzaali, M. J., Valdevit, L., & Hopkins, J. B. (2023) · APL Materials · doi:10.1063/5.0144454 · Cited by 67
“1(b)], 2,124,129–131 negative stiffness, 132–134 negative thermal expansion, 67,71 ultra-high stiffness, 15,63,135 directional compliance, 136 and penta-mode [i.e., fluid-like, Fig.”
Self-citation
Metadata
- Authors
- Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B.
- Affiliations
- HRL Laboratories (United States) (US)
- University of California, Irvine (US)
- California Institute of Technology (US)
- Corresponding author
- Schaedler, T. A.
- Venue
- Science
- Published
- 2011-11-18
- Volume
- 334
- Issue
- 6058
- Pages
- 962-965
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2077098498
- Cited by
- 1,784
- References
- 25
- Citations by year
- 2026: 112 · 2025: 144 · 2024: 124 · 2023: 166 · 2022: 144 · 2021: 156 · 2020: 137 · 2019: 157 · 2018: 144 · 2017: 141 · 2016: 104 · 2015: 105 · 2014: 56 · 2013: 50 · 2012: 42
- FWCI
- 84.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- CaltechAUTHORS (California Institute of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Keywords
- ultralight materials, cellular materials, electroless nickel plating, template etching, energy absorption, hierarchy, compression recovery, thermal insulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.