Ultralight Metallic Microlattices
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
A route is developed for fabricating extremely low-density, hollow-strut metallic lattices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In corks microstructure, one‐dimensional (1D) nanofibers of cell walls intimately align in a highly oriented manner to reach reasonable strength.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“Further, an individual cell of tens of micrometers in size intricately connects with each other to produce a 3D honeycomb‐like architecture, which is helpful to maximize bulk superplastic modulus.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“In nature, corks have been recognized as one of the oldest materials exploited by human beings because of their exceptional mechanical robustness.[ 14 , 15 , 16 ]”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process
Tillotson, T. M., & Hrubesh, L. W. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80427-2 · Cited by 343
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
Research works printed but not linked: 1
- M. Chanda S. K. Roy Plastics Technology Handbook (CRC Press Boca Raton FL 2007).
Cited by
Items 501–600 of 1,001
Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V
Traxel, K. D., Groden, C., Valladares, J., & Bandyopadhyay, A. K. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.140925 · Cited by 68
“found that ultrathin lattices (<10 milligrams per cubic centimeter) could tolerate up to 50% compressive strain before undergoing permanent deformation [10].”
BackgroundFeng, X., Surjadi, J. U., Fan, R., Li, X., Zhou, W., Zhao, S., & Lü, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2020.10.003 · Cited by 67
Al‐Rub, R. K. A., Lee, D.-W., Khan, K. A., & Palazotto, A. N. (2020) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0001759 · Cited by 64
Mechanical properties of 3D hybrid double arrow-head structure with tunable Poisson's ratio
Guo, M.-F., Yang, H., Zhou, Y., & Ma, L. (2021) · Aerospace Science and Technology · doi:10.1016/j.ast.2021.107177 · Cited by 64
Micro-engineered architected metamaterials for cell and tissue engineering
Wang, C., Vangelatos, Z., Grigoropoulos, C. P., & Ma, Z. (2022) · Materials Today Advances · doi:10.1016/j.mtadv.2022.100206 · Cited by 64
Li, X., Zhu, L., Kasuga, T., Nogi, M., & Koga, H. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144010 · Cited by 64
“Although the compression stress at a strain of 80% decreased to approximately 70%, its energy loss coefficient (the ratio of the energy dissipated within the material to the compression energy [26]) remained almost unchanged (Fig.”
Guo, Z., Yang, F., Li, P., Li, L., Zhao, M., Shi, J., Zhang, L., & Cai, Y. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.117777 · Cited by 64
Yang, H., Zhang, J., Wang, J., Hu, J., Wu, Z., Pan, F., & Wu, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202410217 · Cited by 109
Wang, X., Pakdel, A., Zhi, C., Watanabe, K., Sekiguchi, T., Golberg, D. V., & Bando, Y. (2012) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/24/31/314205 · Cited by 64
Preparation and structural evolution of SiOC preceramic aerogel during high-temperature treatment
Du, B., Hong, C., Wang, A., Zhou, S., Qu, Q., Zhou, S., & Zhang, X. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.212 · Cited by 64
Three-Dimensional Reticulated, Spongelike, Resilient Aerogels Assembled by SiC/Si3N4 Nanowires
Zhang, X., Zhang, Y., Qu, Y., Wu, J., Zhang, S., & Yang, J. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04917 · Cited by 64
Zhang, J., Liu, Y., Babamiri, B. B., Zhou, Y., Dargusch, M. S., Hazeli, K., & Zhang, M. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102887 · Cited by 63
Node-reinforced hollow-strut metal lattice materials for higher strength
Noronha, J., Dash, J., Leary, M., Downing, D., Kyriakou, E., Brandt, M., & Qian, M. (2023) · Scripta Materialia · doi:10.1016/j.scriptamat.2023.115547 · Cited by 63
Wang, Y., Wu, K., Zhang, X., Li, X., Wang, Y., & Gao, H. (2024) · Science Advances · doi:10.1126/sciadv.adq2664 · Cited by 63
“…have been devoted to demonstrating remarkable elastic and plastic properties of lattice metamaterials at low densities, such as high modulus ( 8 – 12 ), exceptional strength ( 13 – 16 ), excellent recoverability ( 16 – 18 ), high energy absorption ( 18 , 19 ), and remarkable dynamic impact…”
BackgroundStatic mechanical cloaking and camouflage from disorder
Yang, Z., Yi, J., Li, F., Li, Z., Ye, L., Li, B., & Christensen, J. (2025) · Nature Communications · doi:10.1038/s41467-025-63939-5 · Cited by 64
“Spe-ci Spe-ci fi cally in mechanics, the extraordinary properties of architected materials, such as ultrastiffness 13,14 , ultralight 13,15 , negative stiffness and poisson ’ s ratio 16 – 20 , skin effects 21 , programmability 22 , have been universally presented.”
Mechanics of Crystalline Nanowires: An Experimental Perspective
Zhu, Y. (2016) · Applied Mechanics Reviews · doi:10.1115/1.4035511 · Cited by 63
A Microscopic Shell Structure with Schwarz’s D-Surface
Han, S. C., Choi, J. M., Liu, G., & Kang, K. (2017) · Scientific Reports · doi:10.1038/s41598-017-13618-3 · Cited by 63
An effective length model for octet lattice
Chen, X., & Tan, H. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.03.016 · Cited by 63
Niu, Y., Qian, X., Zhang, J., Wu, W., Liu, H., Xu, C., & Hou, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03591a · Cited by 64
Li, X., Yang, Z., & Lu, Z. (2019) · Extreme Mechanics Letters · doi:10.1016/j.eml.2019.100471 · Cited by 65
Zhang, X. A., Chen, I., & Chang, C. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab2282 · Cited by 65
Multi-step metamaterials with two phases of elastic and plastic deformation
Meng, Z., Ouyang, Z., & Chen, C. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114152 · Cited by 63
Novel slow-sound lattice absorbers based on the sonic black hole
Chua, J. W., Li, X., Yu, X., & Zhai, W. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.116434 · Cited by 61
Song, Q., Singh, A., & Karathanasopoulos, N. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2505992 · Cited by 63
Three-dimensional adaptive soft phononic crystals
Babaee, S., Wang, P., & Bertoldi, K. (2015) · Journal of Applied Physics · doi:10.1063/1.4923032 · Cited by 61
Fabrication and Deformation of Metallic Glass Micro‐Lattices
Rys, J., Valdevit, L., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., & Greer, J. R. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201300454 · Cited by 61
Self-citationBrieland-shoultz, A. C., Tawfick, S., Park, S. J., Bedewy, M., Maschmann, M. R., Baur, J. W., & Hart, A. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400851 · Cited by 61
Ultra‐Light and Scalable Composite Lattice Materials
Gregg, C., Kim, J. H., & Cheung, K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800213 · Cited by 61
Fully Controllable Design and Fabrication of Three-Dimensional Lattice Supercapacitors
Song, J. Y., Chen, Y., Cao, K., Lü, Y., Xin, J. H., & Tao, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15731 · Cited by 62
Liu, W., Song, H., & Huang, C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101257 · Cited by 61
Hierarchically Porous Ceramics via Direct Writing of Binary Colloidal Gel Foams
Román‐Manso, B., Muth, J. T., Gibson, L. J., Ruettinger, W. F., & Lewis, J. A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c22292 · Cited by 60
Superior energy absorption characteristics of additively-manufactured hollow-walled lattices
Zhang, Q., Li, B., Zhou, S., Luo, M., Han, F., Chai, C., Wang, J., & Yang, X. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108834 · Cited by 64
Wan, C., Lu, Y., Jiao, Y., Jin, C., Sun, Q., & Li, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42037 · Cited by 60
Opportunities for mesoscale science
Crabtree, G. W., & Sarrao, J. L. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.274 · Cited by 62
Elastic shells with high-contrast material properties as acoustic metamaterial components
Martin, T. P., Layman, C. N., Moore, K. M., & Orris, G. J. (2012) · Physical Review B · doi:10.1103/physrevb.85.161103 · Cited by 60
Super-compressible, fatigue resistant and anisotropic carbon aerogels for piezoresistive sensors
Wang, M., Shao, C., Zhou, S., Yang, J. H., & Xu, F. (2018) · Cellulose · doi:10.1007/s10570-018-2080-0 · Cited by 60
Nanomechanics of low-dimensional materials for functional applications
Fan, S., Feng, X., Han, Y., Fan, Z., & Lü, Y. (2019) · Nanoscale Horizons · doi:10.1039/c9nh00118b · Cited by 63
Schneider, J., & Kumar, S. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.09.061 · Cited by 59
“Recent advances in micro-and nano-fabrication technologies enable the fabrication of lattices with finer geometric features ranging from submicron up to millimetre scale [16,17].”
Programmable heterogeneous lamellar lattice architecture for dual mechanical protection
Tian, Y., Zhang, X., Hou, B., Jarlöv, A., Du, C., & Zhou, K. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2407362121 · Cited by 59
Maurizi, M., Xu, D. C., Wang, Y.-T., Yao, D., Hahn, D., Oudich, M., Satpati, A., Bauchy, M., Wang, W. W., Sun, Y., et al. (2025) · Nature Machine Intelligence · doi:10.1038/s42256-025-01067-x · Cited by 59
Parallel Process 3D Metal Microprinting
Lin, Y., Zhang, Y., & Yu, M. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800393 · Cited by 60
3D printing geopolymer nanocomposites: Graphene oxide size effects on a reactive matrix
Guo-xiang, Z., Li, C., Zhao, Z., Qi, Y., Yang, Z., Jia, D., Zhong, J., & Zhou, Y. (2020) · Carbon · doi:10.1016/j.carbon.2020.02.021 · Cited by 60
Kim, D., Lee, J., & Kim, G. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101616 · Cited by 65
Li, J., Zhang, Y., Wang, P., Wang, G., Liu, Y., Liu, Y., & Li, Q. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c01199 · Cited by 59
Rotational snap-through behavior of multi-stable beam-type metastructures
Zhang, Y., Tichem, M., & van Keulen, F. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.106172 · Cited by 61
“Advanced Engineering Materials 2018;20(2):1700599 .”
InfluentialYu, G., Li, X., Dai, L., Xiao, L., & Song, W. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102497 · Cited by 64
Luan, S., Chen, E., John, J., & Gaitanaros, S. (2023) · Science Advances · doi:10.1126/sciadv.adi1453 · Cited by 58
“…have been re-ported with desirable effective properties including high stiffness ( 11 – 14 ), negative Poisson ’ s ratio ( 15 – 17 ), phononic bandgaps ( 18 , 19 ), energy absorption ( 20 – 22 ), heat transfer ( 23 ), strength and resilience ( 24 – 28 ), toughness ( 29 , 30 ), and others.”
Fayyaz, F., Bashmal, S., Nazir, A., Khan, S., & Alofi, A. (2025) · Polymers · doi:10.3390/polym17020237 · Cited by 62
Li, Y., Zhang, Q., Chai, R., Zhao, G., Liu, Y., & Lu, Y. (2015) · ChemCatChem · doi:10.1002/cctc.201500086 · Cited by 58
Vibration of mechanically-assembled 3D microstructures formed by compressive buckling
Wang, H., Ning, X., Li, H., Luan, H., Xue, Y., Yu, X., Fan, Z., Li, L., Rogers, J. A., Zhang, Y., et al. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.12.002 · Cited by 58
Graphene aerogels that withstand extreme compressive stress and strain
Li, C., Ding, M., Zhang, B., Qiao, X., & Liu, C. (2018) · Nanoscale · doi:10.1039/c8nr04824j · Cited by 58
Tan, K. W., & Wiesner, U. B. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b01766 · Cited by 59
Glaesener, R. N., Lestringant, C., Telgen, B., & Kochmann, D. M. (2019) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2019.04.022 · Cited by 58
Robust Carbonaceous Nanofiber Aerogels from All Biomass Precursors
Hu, B., Zhang, H., Li, S., Chen, W., Wu, Z., Liang, H., Yu, H., & Yu, S. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207532 · Cited by 57
Zhu, G., Wen, D., Wei, L., Wang, Z., & Zhao, X. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.116962 · Cited by 57
Zhang, Y., Zhu, Y., Chen, F., & Sun, T. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13328 · Cited by 58
Fan, Z., Hwang, K., Rogers, J. A., Huang, Y. Y., & Zhang, Y. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.10.012 · Cited by 57
Controlled mechanical assembly of complex 3D mesostructures and strain sensors by tensile buckling
Guo, X., Wang, X. S., Ou, D., Ye, J., Pang, W., Huang, Y. Y., Rogers, J. A., & Zhang, Y. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0028-y · Cited by 59
Isotropic Ti–6Al–4V lattice via topology optimization and electron-beam melting
Takezawa, A., Yonekura, K., Koizumi, Y., Zhang, X., & Kitamura, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.06.008 · Cited by 57
Zhu, J., Liu, Q., Liu, J., Chen, R., Zhang, H., Yu, J., Zhang, M., Li, R., & Wang, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09022 · Cited by 57
Dynamic response of additively manufactured graded foams
Duan, Y., Zhao, X., Liu, Z., Hou, N., Liu, H., Du, B., Hou, B., & Li, Y. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107630 · Cited by 57
Optimal isotropic, reusable truss lattice material with near-zero Poisson’s ratio
Chen, X., Moughames, J., Ji, Q., Martínez, J. A. I., Tan, H., Adrar, S., Laforge, N., Cote, J.-M., Euphrasie, S., Ulliac, G., et al. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101048 · Cited by 59
Design for additive manufacturing from a force-flow perspective
Li, S., Xin, Y., Yu, Y., & Wang, Y. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109664 · Cited by 60
Ultra-low-density digitally architected carbon with a strutted tube-in-tube structure
Ye, J., Liu, L., Oakdale, J. S., Lefebvre, J., Bhowmick, S., Voisin, T., Roehling, J. D., Smith, W. L., Ceron, M. R., van Ham, J., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-01125-w · Cited by 57
Zhang, T., Huang, Z., Li, Y., Xu, Z., Zhou, Z., & Chen, Z. (2022) · Thin-Walled Structures · doi:10.1016/j.tws.2022.110234 · Cited by 56
Li, Z., Li, X., Wang, X., Wang, Z., & Zhai, W. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c02498 · Cited by 56
An origami-inspired design of highly efficient cellular cushion materials
Dalaq, A. S., Khazaaleh, S., & Daqaq, M. F. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101835 · Cited by 64
Stiffness and Strength of Hexachiral Honeycomb-Like Metamaterials
Tancogne‐Dejean, T., Karathanasopoulos, N., & Mohr, D. (2019) · Journal of Applied Mechanics · doi:10.1115/1.4044494 · Cited by 56
Impact resistance of additively manufactured 3D double-U auxetic structures
Yang, H., & Ma, L. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2021.108373 · Cited by 56
3D-Printed Architected Materials Inspired by Cubic Bravais Lattices
Libonati, F., Graziosi, S., Ballo, F. M., Mognato, M., & Sala, G. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01708 · Cited by 59
Lightweight, ultra-tough, 3D-architected hybrid carbon microlattices
Surjadi, J. U., Zhou, Y., Huang, S., Wang, L., Li, M., Fan, S., Li, X., Zhou, J., Lam, R. H. W., Wang, Z., et al. (2022) · Matter · doi:10.1016/j.matt.2022.08.010 · Cited by 55
Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion
Noronha, J., Rogers, J., Leary, M., Kyriakou, E., Inverarity, S. B., Das, R. K., Brandt, M., & Qian, M. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103637 · Cited by 55
Dynamic energy absorption characteristics of hollow microlattice structures
Liu, Y., Schaedler, T. A., & Chen, X. (2014) · Mechanics of Materials · doi:10.1016/j.mechmat.2014.06.008 · Cited by 55
Self-citationHydrophobic sponge for spilled oil absorption
Peng, L., Yuan, S., Yan, G., Yu, P., & Luo, Y. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40886 · Cited by 55
Yuan, W., Zhang, X., Zhao, J., Li, Q., Ao, C., Xia, T. D., Zhang, W., & Lu, C. (2017) · Results in Physics · doi:10.1016/j.rinp.2017.08.011 · Cited by 56
Robust Nanofibrillated Cellulose Hydro/Aerogels from Benign Solution/Solvent Exchange Treatment
Fan, J., Ifuku, S., Wang, M., Uetani, K., Liang, H., Yu, H., Song, Y., Li, X., Qi, J., Zheng, Y., et al. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00418 · Cited by 56
A new coating filter of coated structure for topology optimization
Yoon, G. H., & Yi, B. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02279-7 · Cited by 57
Zhang, M., Yu, Q., Liu, Z., Zhang, J., Jiao, D., Li, S., Peng, H. F., Wang, Q., Zhang, Z., & Ritchie, R. O. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108783 · Cited by 54
Xiong, Z., Li, M., Hao, S., Liu, Y., Cui, L., Yang, H. S., Cui, C., Jiang, D., Yang, Y., Lei, H., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c11226 · Cited by 54
Reprogrammable flexible mechanical metamaterials
Zheng, X., Uto, K., Hu, W., Chen, T., Naito, M., & Watanabe, I. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101662 · Cited by 66
Wave propagation in equivalent continuums representing truss lattice materials
Messner, M. C., Barham, M. I., Kumar, M., & Barton, N. R. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.07.023 · Cited by 54
“For structures with unit cells at this lower bound, the only option is to increase the strut height (Meza et al., 2014; Schaedler et al., 2011).”
BackgroundLi, Z., Song, X. M., Cui, S., Jiao, Y., & Zhou, C. (2018) · RSC Advances · doi:10.1039/c8ra00358k · Cited by 54
Metal-coated hybrid meso-lattice composites and their mechanical characterizations
Song, J. Y., Gao, L., Cao, K., Zhang, H., Xu, S. J., Jiang, C., Surjadi, J. U., Xu, Y., & Lü, Y. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.07.074 · Cited by 54
Controlled Microstructural Architectures Based on Smart Fabrication Strategies
Ding, H., Zhang, Q., Gu, H., Liu, X., Sun, L., Gu, M., & Gu, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901760 · Cited by 54
Compression and buckling of microarchitectured Neovius-lattice
Abueidda, D., Elhebeary, M., Shiang, C.-S., Al‐Rub, R. K. A., & Jasiuk, I. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100688 · Cited by 54
Liu, P., Li, X., Chang, X., Min, P., Shu, C., Li, Y., Kang, Y., & Yu, Z. (2021) · Carbon · doi:10.1016/j.carbon.2021.03.014 · Cited by 54
Growing designability in structural materials
Ritchie, R. O., & Zheng, X. R. (2022) · Nature Materials · doi:10.1038/s41563-022-01336-9 · Cited by 53
Mitigating impact/blast energy via a novel nanofluidic energy capture mechanism
Xu, B., Qiao, Y., & Chen, X. (2013) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2013.09.022 · Cited by 53
“Recent improvements, including material selection and cell geometry optimization, are toward the goal of enhancing their capabilities for mitigating blast or impacting waves (Cao et al., 2005; Evans et al., 2001; Nemat-Nasser et al., 2007; Schaedler et al., 2011).”
BackgroundBuckling, build orientation, and scaling effects in 3D printed lattices
Mueller, J., & Shea, K. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.08.013 · Cited by 53
Discrete‐Continuum Duality of Architected Materials: Failure, Flaws, and Fracture
Mateos, A. J., Huang, W. D., Zhang, Y., & Greer, J. R. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806772 · Cited by 53
Self-citationVacancies for controlling the behavior of microstructured three-dimensional mechanical metamaterials
Vangelatos, Z., Komvopoulos, K., & Grigoropoulos, C. P. (2018) · Mathematics and Mechanics of Solids · doi:10.1177/1081286518810739 · Cited by 52
Guo, C., Ye, F., & Cheng, L. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109129 · Cited by 52
A comprehensive review on energy-absorbing mechanical metamaterials: From mechanisms to applications
Li, S., Zhang, W., Ding, S., Lu, J., & Ni, Y. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.113222 · Cited by 52
Super-elastic graphene/carbon nanotube aerogels and their application as a strain-gauge sensor
Lv, P. F., Yu, K., Tan, X., Zheng, R., Ni, Y., Wang, Z., Liu, C., & Wei, W. (2016) · RSC Advances · doi:10.1039/c5ra20342b · Cited by 52
Pedrielli, A., Taioli, S., Garberoglio, G., & Pugno, N. M. (2016) · Carbon · doi:10.1016/j.carbon.2016.10.034 · Cited by 52
“The shape and dimension of the nodes play an important role in the deformation of hollow truss networks, as recently shown for microtruss networks (Schaedler et al., 2011; Valdevit et al., 2013).”
BackgroundXue, R., Li, R., Du, Z., Zhang, W., Zhu, Y., Sun, Z. G., & Guo, X. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.03.004 · Cited by 53
Li, S., Librandi, G., Yao, Y., Richard, A. J., Schneider‐Yamamura, A., Aizenberg, J., & Bertoldi, K. (2021) · Advanced Materials · doi:10.1002/adma.202105024 · Cited by 53
Hollow medium-entropy alloy nanolattices with ultrahigh energy absorption and resilience
Surjadi, J. U., Feng, X., Fan, R., Lin, W., Li, X., & Lü, Y. (2021) · NPG Asia Materials · doi:10.1038/s41427-021-00306-y · Cited by 51
Moestopo, W. P., Shaker, S., Deng, W., & Greer, J. R. (2023) · Science Advances · doi:10.1126/sciadv.ade6725 · Cited by 51
“Attaining full hierarchical ordering of natural materials remains a challenge; progress has been enabled by modern fabrication methods capable of manufacturing synthetic materials with complex prescribed geometries and multiple orders of hierarchy ( 5 – 8 ).”
Self-citationAlSi10Mg hollow-strut lattice metamaterials by laser powder bed fusion
Noronha, J., Leary, M., Brandt, M., & Qian, M. (2024) · Materials Advances · doi:10.1039/d3ma00813d · Cited by 51
Metadata
- Authors
- Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B.
- Affiliations
- HRL Laboratories (United States) (US)
- University of California, Irvine (US)
- California Institute of Technology (US)
- Corresponding author
- Schaedler, T. A.
- Venue
- Science
- Published
- 2011-11-18
- Volume
- 334
- Issue
- 6058
- Pages
- 962-965
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2077098498
- Cited by
- 1,784
- References
- 25
- Citations by year
- 2026: 112 · 2025: 144 · 2024: 124 · 2023: 166 · 2022: 144 · 2021: 156 · 2020: 137 · 2019: 157 · 2018: 144 · 2017: 141 · 2016: 104 · 2015: 105 · 2014: 56 · 2013: 50 · 2012: 42
- FWCI
- 84.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- CaltechAUTHORS (California Institute of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Keywords
- ultralight materials, cellular materials, electroless nickel plating, template etching, energy absorption, hierarchy, compression recovery, thermal insulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.