Ultralight Metallic Microlattices
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
A route is developed for fabricating extremely low-density, hollow-strut metallic lattices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In corks microstructure, one‐dimensional (1D) nanofibers of cell walls intimately align in a highly oriented manner to reach reasonable strength.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“Further, an individual cell of tens of micrometers in size intricately connects with each other to produce a 3D honeycomb‐like architecture, which is helpful to maximize bulk superplastic modulus.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“In nature, corks have been recognized as one of the oldest materials exploited by human beings because of their exceptional mechanical robustness.[ 14 , 15 , 16 ]”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process
Tillotson, T. M., & Hrubesh, L. W. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80427-2 · Cited by 343
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
Research works printed but not linked: 1
- M. Chanda S. K. Roy Plastics Technology Handbook (CRC Press Boca Raton FL 2007).
Cited by
Items 901–1,000 of 1,001
A pretraining-finetuning computational framework for material homogenization
Wang, Y., Li, X., Yan, Z., Ma, S., Bai, J., Liu, B., Zhuang, X., Rabczuk, T., & Liu, Y. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111388 · Cited by 25
“…values of natural cellular materials such as wood and cork have motivated the development of artificial cellular materials to achieve high specific stiffness 58 and 59,60 , strength 61 , negative Poisson’s ratio 62,63 , energy absorption 6465 , thermal insulation 66 , and acoustic manipulation 67 .”
Park, S. J., Shin, J., Magagnosc, D. J., Kim, S., Cao, C., Turner, K. T., Purohit, P. K., Gianola, D. S., & Hart, A. J. (2020) · ACS Nano · doi:10.1021/acsnano.0c02422 · Cited by 26
Liu, H., Chen, L., Zhou, Y., Pan, X., Zhu, S., & Li, W. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109306 · Cited by 25
A metafluid with multistable density and internal energy states
Peretz, O., Abu, E. B., Zigelman, A., Givli, S., & Gat, A. D. (2022) · Nature Communications · doi:10.1038/s41467-022-29048-3 · Cited by 25
An Nylon lattice structure with improved mechanical property and energy absorption capability
Zeng, Y., Du, X., Yao, H., Li, P., Dong, P., & Chen, J. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100285 · Cited by 25
Li, P., Yang, F., Liu, Y., Bian, Y., Zhang, S., Wang, L., & Fan, H. (2023) · Computers & Structures · doi:10.1016/j.compstruc.2023.107093 · Cited by 25
Integrated random-aligned carbon nanotube layers: deformation mechanism under compression
Zeng, Z., Gui, X., Gan, Q., Lin, Z., Zhu, Y. N., Zhang, W., Xiang, R., Cao, A., & Tang, Z. (2013) · Nanoscale · doi:10.1039/c3nr04667b · Cited by 25
Conductive resilient graphene aerogel via magnesiothermic reduction of graphene oxide assemblies
Tang, H., Gao, P., Bao, Z., Zhou, B., Shen, J., Mei, Y., & Wu, G. (2015) · Nano Research · doi:10.1007/s12274-014-0672-z · Cited by 25
“Such scaling indicated a bending-dominated mechanic behavior, which was observed in nickel micro-lattice, cellular materials, rGO aerogels reduced by ascorbic acid [17,33,34].”
BackgroundPolydopamine decorated 3D nickel foam for extraction of sixteen polycyclic aromatic hydrocarbons
Cai, Y., Yan, Z., Yang, M., Huang, X., Weiping, M., Wang, L., & Cai, Q. (2016) · Journal of Chromatography A · doi:10.1016/j.chroma.2016.11.030 · Cited by 25
Improved neuron culture using scaffolds made of three-dimensional PDMS micro-lattices
Li, S., Severino, F. P. U., Ban, J., Wang, L., Pinato, G., Torre, V., & Chen, Y. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa777 · Cited by 29
High porous cellular materials by spray solution combustion synthesis and spark plasma sintering
Трусов, Г. В., Tarasov, A. B., Moskovskikh, D., Рогачев, А. С., & Mukasyan, A. S. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.11.250 · Cited by 28
Analysis of wave band gaps in mechanical metamaterial based on Nelder–Mead method
Dong, J., Chen, W., Zeng, Z., Qin, Q., & Xiao, Y. (2019) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2019.03.011 · Cited by 25
“[4] Schaedler T A , Jacobsen A J , Torrents A , Sorensen A E , Lian J , Greer J R , et al.”
BackgroundSelf-Assembly of Ultrathin Nanocrystals to Multidimensional Superstructures
Akram, B., & Wang, X. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01290 · Cited by 25
Elastic response of hollow truss lattice micro-architectures
Watts, S. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.08.018 · Cited by 25
Dubois, J.-B., Thilly, L., Renault, P.-O., & Lecouturier, F. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200033 · Cited by 25
HyperCAN: Hypernetwork-driven deep parameterized constitutive models for metamaterials
Zheng, L., Kochmann, D. M., & Kumar, S. (2024) · Extreme Mechanics Letters · doi:10.1016/j.eml.2024.102243 · Cited by 24
“…featuring beam-[1,2], plate-[3], or shell-based [4–6] architectures, have rev-olutionized material design by enabling tailored properties across diverse applications, including ultralight structures [7,8], auxetics [9– 11], impact protective systems [12,13], and acoustic waveguides [14, 15].”
BackgroundEfa, D. A., & Ifa, D. A. (2025) · Results in Materials · doi:10.1016/j.rinma.2025.100702 · Cited by 32
In situ synthesis of silver nanowire gel and its super-elastic composite foams
Huang, S., Feng, C., Mayes, E. L. H., Yao, B., He, Z., Asadi, S., Alan, T., & Yang, J. (2020) · Nanoscale · doi:10.1039/d0nr03958f · Cited by 24
Jin, N., Wang, Y., Cheng, H., Cheng, X., & Zhang, H. (2021) · Journal of Dynamic Behavior of Materials · doi:10.1007/s40870-021-00318-3 · Cited by 24
“Thanks to the progress in micro/nano fabrication technologies, nowadays the lattice structure with truss diameter ranging from submicron to millimeter level can be made [6, 7].”
BackgroundMultifunctionality of Nanoengineered Self‐Sensing Lattices Enabled by Additive Manufacturing
Ubaid, J., Schneider, J., Deshpande, V. S., Wardle, B. L., & Kumar, S. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200194 · Cited by 24
dos Santos, W. F., Lopes, I. A. R., Pires, F. M. A., & Proença, S. P. B. (2024) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2024.112724 · Cited by 24
Bernard, A. R., & ElSayed, M. S. A. (2024) · Materials · doi:10.3390/ma17102181 · Cited by 24
Fluorinated polymerizable phosphonium salts from PH3: Surface properties of photopolymerized films
Guterman, R., Berven, B. M., Corkery, T. C., Nie, H., Idacavage, M. J., Gillies, E. R., & Ragogna, P. J. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26692 · Cited by 24
Cross-Split of Dislocations: An Athermal and Rapid Plasticity Mechanism
Kositski, R., Kovalenko, O., Lee, S., Greer, J. R., Rabkin, E., & Mordehai, D. (2016) · Scientific Reports · doi:10.1038/srep25966 · Cited by 24
“As the split [111] edge dislocation glides away from the pile-up, the force acting on it has three contributions: (1) dislocation “a1” attracts it back to recombine with itself, (2) dislocation “b” repels it, and (3) the applied compressive stress has a resolved shear stress component that pulls it away from the pile…”
BackgroundSelf-citationTunable rotating-mode density measurement using magnetic levitation
Gao, Q., Zhang, W., Zou, H., Liu, F., Li, W., Peng, Z., & Meng, G. (2018) · Applied Physics Letters · doi:10.1063/1.5022727 · Cited by 24
Modeling the non-linear elastic response of periodic lattice materials
Cohen, N., McMeeking, R. M., & Begley, M. R. (2018) · Mechanics of Materials · doi:10.1016/j.mechmat.2018.11.010 · Cited by 24
A phenomenological constitutive modelling of polyethylene foam under multiple impact conditions
Lu, F., Hua, G., Wang, L., Jiang, H., & Gao, D. (2019) · Packaging Technology and Science · doi:10.1002/pts.2445 · Cited by 24
“x • 0 ð Þ 1⁄4 ffiffiffiffiffiffiffiffiffiffiffi 2gH1 p ; x 0 ð Þ 1⁄4 0; (26)”
Compressive Response of Non-slender Octet Carbon Microlattices
Kudo, A., Misseroni, D., Wei, Y., & Bosi, F. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00169 · Cited by 24
Fabrication and anti-crushing performance of hollow honeytubes
Yin, S., Wang, H., Hu, J., Wu, Y., Wang, Y., Wu, S., & Xu, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107522 · Cited by 24
Mechanical Characteristics of Superimposed 316L Lattice Structures under Static and Dynamic Loading
Chang, C., Wu, W., Zhang, H., Chen, J., Xu, Y., Lin, J., & Ding, L. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001536 · Cited by 24
Three-Dimensional Trampolinelike Behavior in an Ultralight Elastic Metamaterial
Gerard, N. J., Oudich, M., Xu, Z., Yao, D., Cui, H., Naify, C. J., Ikei, A., Rohde, C. A., Zheng, X. R., & Jing, Y. (2021) · Physical Review Applied · doi:10.1103/physrevapplied.16.024015 · Cited by 24
“This is in stark contrast to conventional 3D microlattices [19,41,42] and elastic metamaterials [7–15], where all the vertices of the lattice are identical and therefore contain only one type of homogeneous nodal structure as illustrated in Appendix B.”
ResultTwin mechanical metamaterials inspired by nano-twin metals: Experimental investigations
Wu, W., Kim, S., Ramazani, A., & Cho, Y. T. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115580 · Cited by 24
Optimization on microlattice materials for sound absorption by an integrated transfer matrix method
Cai, X., Yang, J., & Hu, G. (2015) · The Journal of the Acoustical Society of America · doi:10.1121/1.4916791 · Cited by 24
Yang, W., Yue, Z., & Xu, B. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.05.001 · Cited by 24
Acoustically soft and mechanically robust hierarchical metamaterials in water
Wang, Y., Zhao, H., Yang, H., Zhang, H., Li, T., Wang, C., Liu, J., Zhong, J., Yu, D., & Wen, J. (2023) · Physical Review Applied · doi:10.1103/physrevapplied.20.054015 · Cited by 23
Design and mechanical properties analysis of a cellular Waterbomb origami structure
Bai, Y., Wang, Z., & Shi, Y. (2024) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2024.100509 · Cited by 23
Enhanced Deformability Through Distributed Buckling in Stiff Quasicrystalline Architected Materials
Rosa, M. I. N., Karapiperis, K., Radi, K., Pescialli, E., & Kochmann, D. M. (2025) · Advanced Materials · doi:10.1002/adma.202505125 · Cited by 23
Harnessing screw dislocations in shell-lattice metamaterials for efficient, stable electrocatalysts
Wang, L., Yin, D., Surjadi, J. U., Ding, J., Fu, H., Zhou, X., Li, R., Chen, M., Li, X., Song, X., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-62489-0 · Cited by 25
Ultrahigh Tensile Strength Nanowires with a Ni/Ni–Au Multilayer Nanocrystalline Structure
An, B. H., Jeon, I., Seo, J.-H., Ahn, J.-P., Kraft, O., Choi, I., & Kim, Y. K. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00275 · Cited by 23
Nanocomposites for Extrinsic Self-healing Polymer Materials
Wang, Y., Pham, D. T., & Ji, C. (2017) · Springer series on polymer and composite materials · doi:10.1007/978-3-319-50424-7_9 · Cited by 28
Gupta, A., Kurzeja, K., Rossignac, J. R., Allen, G. H., Kumar, P. S., & Musuvathy, S. R. (2019) · Computer-Aided Design · doi:10.1016/j.cad.2019.04.001 · Cited by 23
Gupta, K., Joshi, P., & Khatri, O. P. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106788 · Cited by 23
Schwiedrzik, J. J., Ramachandramoorthy, R., Edwards, T. E. J., Schürch, P., Casari, D., Duarte, M. J., Mohanty, G., Dehm, G., Maeder, X., Philippe, L., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110836 · Cited by 24
On Quasi-Static and Dynamic Compressive Behaviors of Interlocked Composite Kagome Lattice Structures
Li, J., Qin, Q., Zhang, W., Wang, Q., & Peng, J. (2022) · Journal of Applied Mechanics · doi:10.1115/1.4056323 · Cited by 23
Shirzadkhani, R., Eskandari, S., & Akbarzadeh, A. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.123917 · Cited by 23
Choukir, S., van Egmond, D. A., Hatton, B. D., Hibbard, G. D., & Singh, C. V. (2023) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2023.103863 · Cited by 26
Zhao, C., Li, S., Luo, X., Li, B., Pan, W., & Wu, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00786k · Cited by 23
Nanocarbon aerogel complexes inspired by the leaf structure
Zhong, J., Meng, J., Gui, X., Hu, T., Xie, N., Lu, X., Yang, Z., & Koratkar, N. A. (2014) · Carbon · doi:10.1016/j.carbon.2014.05.068 · Cited by 23
Damping behavior of 3D woven metallic lattice materials
Ryan, S. M., Szyniszewski, S., Ha, S., Xiao, R., Nguyen, T. D., Sharp, K. W., Weihs, T. P., Guest, J. K., & Hemker, K. J. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.03.010 · Cited by 23
Desmoulins, A., & Kochmann, D. M. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.09.027 · Cited by 23
Kaur, M., Han, S. M., & Kim, W. S. (2016) · MRS Communications · doi:10.1557/mrc.2016.62 · Cited by 24
Yu, J., Wang, M., & Lin, S. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.08.038 · Cited by 23
Ultra-low-density silver aerogels via freeze-substitution
Fears, T. M., Hammons, J. A., Sain, J. D., Nielsen, M. H., Braun, T., & Kucheyev, S. O. (2018) · APL Materials · doi:10.1063/1.5039521 · Cited by 25
Sur, A., Narkhede, S., & Darvekar, S. K. (2019) · Engineering Journal · doi:10.4186/ej.2019.23.6.419 · Cited by 23
“Schematic of the process for manufacturing nickel plated lattice structures [26].”
BackgroundFacile template-free synthesis of multifunctional 3D cellular carbon from edible rice paper
Islam, M., Weidler, P. G., Heißler, S., Mager, D., & Korvink, J. G. (2020) · RSC Advances · doi:10.1039/d0ra01447h · Cited by 23
Qiu, S., Bi, H., Hu, X., Wu, M., Li, Y., & Sun, L. (2017) · RSC Advances · doi:10.1039/c6ra26701g · Cited by 24
Cao, L., Li, X., Zhou, X., Li, Y., Vecchio, K. S., Yang, L., Cui, W., Yang, R., Zhu, Y., Guo, Z., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01645 · Cited by 23
Propriétés effectives de matériaux architecturés
Dirrenberger, J. (2012) · theses.fr (ABES) · doi:10.70675/34b536eaz235bz431fz8fb3z24961f38c855 · Cited by 23
Yang, J., Huang, Z., Yuan, L., & Li, W. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.02.125 · Cited by 22
Zhang, Z., Zhang, Q., Huang, L., Zhang, D., & Jin, F. (2020) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107247 · Cited by 22
Khan, H. M., Çalışkan, C. İ., & Bulduk, M. E. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2022.0224 · Cited by 22
“25,28,29 In hybrid lattice geometries, the deformation behavior was a combination of both lattice types.”
Digitization of Free‐Shapable Graphene Foam with Damage Tolerance
Xu, X., Du, J., Cao, Q., Zhang, D., Li, C., Fu, G., Gao, Y. L., Yang, J., Guan, C., & Huang, W. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300904 · Cited by 22
Study on the topological morphology and mechanical properties of variable-amplitude TPMS structures
Ma, X., Guo, C., Hu, C., Zhang, Z., & Shen, J. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.10.164 · Cited by 22
Confined Chemical Fluid Deposition of Ferromagnetic Metalattices
Liu, Y., Kempinger, S., He, R., Day, T. D., Moradifar, P., Yu, S.-Y., Dysart, J. L., Torres, V. M., Xu, P., Mallouk, T. E., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04633 · Cited by 22
Optimizing film thickness to delay strut fracture in high-entropy alloy composite microlattices
Surjadi, J. U., Feng, X., Zhou, W., & Lü, Y. (2021) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/abd8e8 · Cited by 22
Bae, G., Jang, D., & Jeon, S. (2021) · ACS Nano · doi:10.1021/acsnano.0c10534 · Cited by 23
Lian, J., Lee, S., Valdevit, L., Baskes, M. I., & Greer, J. R. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.10.031 · Cited by 22
Self-citationHierarchical space frames for high mechanical efficiency: Fabrication and mechanical testing
Rayneau-Kirkhope, D., Mao, Y. J., Farr, R. S., & Segal, J. I. (2012) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2012.06.011 · Cited by 25
“Introduction Structural hierarchy as a design principle is found throughut nature for highly efficient, multipurpose materials (Baer et al., 987; Gao et al., 2005; Schaedler et al., 2011; Lakes, 1993).”
BackgroundFabrication of 3D Micro-Architected/Nano-Architected Materials
Valdevit, L., & Bauer, J. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-35321-2.00018-2 · Cited by 24
Self-citationSurface Functionalization of 3D-Printed Bio-Inspired Scaffolds for Biomedical Applications: A Review
Kim, Y. S., & Shin, Y. S. (2024) · Biomimetics · doi:10.3390/biomimetics9110703 · Cited by 21
“Surface metallization enhances the electrical, mechanical, and thermal properties of 3D-printed structures, making them suitable for applications requiring conductivity and durability [29].”
Cai, B., Fan, Y., Yang, S., Che, C., Li, X., & Wang, X. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.123255 · Cited by 21
Fabrication of mechanical metamaterials by 3D printing: recent advancements and current challenges
Khosravani, M. R., Anders, D., Ayatollahi, M. R., & Reinicke, T. (2025) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-025-01290-8 · Cited by 22
“For instance, they show exceptional potential for battery electrodes, shock energy damping, insulation, and catalytic supports [67].”
Bai, Y., Liu, C., Li, Y., Li, J., Qiao, L., Zhou, J., & Bai, Y. (2022) · Materials Horizons · doi:10.1039/d2mh00670g · Cited by 21
Yu, X., Wang, Z., Fu, W., Yu, Z., Wang, Y., Zhao, Y., & Zhao, J. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.09.123 · Cited by 21
Abdallah, S., Mhanna, R., Cabrera‐González, J., Núñez, R., Khitous, A., Morlet‐Savary, F., Soppera, O., Versace, D., & Malval, J. (2023) · Chemistry of Materials · doi:10.1021/acs.chemmater.3c01249 · Cited by 21
Desole, M. P., Gisario, A., & Barletta, M. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13430-0 · Cited by 23
Mechanical Performance of Copper‐Nanocluster‐Polymer Nanolattices
Tang, J., Liang, H., Ren, A., Ma, L., Wei, H., Yao, Y., Zheng, L., Li, H., & Li, Q. (2024) · Advanced Materials · doi:10.1002/adma.202400080 · Cited by 21
Pack Aluminization Synthesis of Superalloy 3D Woven and 3D Braided Structures
Erdeniz, D., Levinson, A. J., Sharp, K. W., Rowenhorst, D. J., Fonda, R. W., & Dunand, D. C. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2602-9 · Cited by 21
Yu, X., Liu, L., Li, T., & Dang, Z. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.057 · Cited by 21
Guo, X., Xu, Z., Zhang, F., Wang, X. S., Zi, Y., Rogers, J. A., Huang, Y. Y., & Zhang, Y. (2018) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-018-0047-1 · Cited by 21
Mechanics of Chiral Honeycomb Architectures With Phase Transformations
Hector, K. W., Restrepo, D., Bonilla, C. T., Hector, L. G., Mankame, N. D., & Zavattieri, P. D. (2019) · Journal of Applied Mechanics · doi:10.1115/1.4044024 · Cited by 21
Gasparetto, V. E. L., & ElSayed, M. S. A. (2021) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2021.104278 · Cited by 21
McMahan, C., Akerson, A., Celli, P., Audoly, B., & Daraio, C. (2022) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2022.104934 · Cited by 23
Neuron‐Inspired Steiner Tree Networks for 3D Low‐Density Metastructures
Yu, H., Zhang, Q., Cumming, B. P., Goi, E., Cole, J. H., Luan, H., Chen, X., & Gu, M. (2021) · Advanced Science · doi:10.1002/advs.202100141 · Cited by 21
Zhang, L., & Sheng, X. (2022) · Intelligent Transportation Infrastructure · doi:10.1093/iti/liac010 · Cited by 22
Sengokmen-Ozsoz, N., Boston, R., & Claeyssens, F. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04637 · Cited by 21
Optimization of fractal space frames under gentle compressive load
Rayneau-Kirkhope, D., Mao, Y. J., & Farr, R. S. (2013) · Physical Review E · doi:10.1103/physreve.87.063204 · Cited by 21
Large-Area Nanolattice Film with Enhanced Modulus, Hardness, and Energy Dissipation
Bagal, A., Zhang, X. A., Shahrin, R., Dandley, E. C., Zhao, J., Poblete, F. R., Oldham, C. J., Zhu, Y., Parsons, G. N., Bobko, C. P., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-09521-6 · Cited by 21
Nanoscale 3D ordered polymer networks
Thomas, E. L. (2017) · Science China Chemistry · doi:10.1007/s11426-017-9138-5 · Cited by 21
Macroporous nanowire nanoelectronic scaffolds for synthetic tissues
Tian, B., Liu, J., Dvir, T., Jin, L., Tsui, J. H., Qing, Q., Suo, Z., Langer, R., Kohane, D. S., & Lieber, C. M. (2012) · Nature Materials · doi:10.1038/nmat3404 · Cited by 20
“c, SEM image of a single-kinked-nanowire FET within a reticular scaffold, showing (1) the kinked nanowire, (2) metallic interconnects (dashed magenta lines) and (3) the SU-8 backbone.”
Nanoscale 3D Printing for Empowering Future Nanodevices
Yin, Y., Liu, B., Han, Y., Liu, Q., Kou, J., Zhang, Y., Wen, J., Liu, S., Wang, Q., Shan, Y., et al. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500083 · Cited by 20
Metamaterials Break the Constraints of Traditional Civil Infrastructure
Alavi, A. H. (2025) · Advanced Materials · doi:10.1002/adma.202518198 · Cited by 20
Xu, Z., Wu, F., Pan, K., Liao, Y., Wang, F., Cheng, L., Yu, J., Liu, Y., & Ding, B. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.11.373 · Cited by 20
Dynamically stable radiation pressure propulsion of flexible lightsails for interstellar exploration
Gao, R., Kelzenberg, M. D., & Atwater, H. A. (2024) · Nature Communications · doi:10.1038/s41467-024-47476-1 · Cited by 20
“Potential structural reinforcement approaches include microlattices 50 , gas-fi lled envelopes 39,51 , annular tensioning, fractal supports 52 , ten-segrity structures 53 , or lamination with low-density or corrugated backing layer(s).”
Schroer, A., Bauer, J., Schwaiger, R., & Kraft, O. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.04.014 · Cited by 23
Zhang, D., Xiao, J., Yu, W., Guo, Q., & Yang, J. (2018) · Nanotechnology · doi:10.1088/1361-6528/aae283 · Cited by 20
Ha, S., Lee, H. Y., Hemker, K. J., & Guest, J. K. (2018) · Journal of Mechanical Design · doi:10.1115/1.4042114 · Cited by 20
A fully parameterized methodology for lattice materials with octahedron-based structures
Zhu, S., Hu, J., Wang, B., Ma, L., Wang, S., & Wu, L. (2019) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2019.1629048 · Cited by 20
“, the struts have a secondary structures, as is the case with hollow structures [13], core-shell composites [10], or sandwich structures [28], and often have microscale or even nanoscale feature dimensions.”
BackgroundMethodThermal transport in hollow metallic microlattices
Farzinazar, S., Schaedler, T. A., Valdevit, L., & Lee, J. (2019) · APL Materials · doi:10.1063/1.5114955 · Cited by 20
Self-citationŞerban, D. A., Negru, R. M., Sărăndan, S., Belgiu, G., & Marșavina, L. (2019) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2019.1669093 · Cited by 20
Metadata
- Authors
- Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B.
- Affiliations
- HRL Laboratories (United States) (US)
- University of California, Irvine (US)
- California Institute of Technology (US)
- Corresponding author
- Schaedler, T. A.
- Venue
- Science
- Published
- 2011-11-18
- Volume
- 334
- Issue
- 6058
- Pages
- 962-965
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2077098498
- Cited by
- 1,784
- References
- 25
- Citations by year
- 2026: 112 · 2025: 144 · 2024: 124 · 2023: 166 · 2022: 144 · 2021: 156 · 2020: 137 · 2019: 157 · 2018: 144 · 2017: 141 · 2016: 104 · 2015: 105 · 2014: 56 · 2013: 50 · 2012: 42
- FWCI
- 84.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- CaltechAUTHORS (California Institute of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Keywords
- ultralight materials, cellular materials, electroless nickel plating, template etching, energy absorption, hierarchy, compression recovery, thermal insulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.