Ultralight Metallic Microlattices
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
A route is developed for fabricating extremely low-density, hollow-strut metallic lattices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In corks microstructure, one‐dimensional (1D) nanofibers of cell walls intimately align in a highly oriented manner to reach reasonable strength.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“Further, an individual cell of tens of micrometers in size intricately connects with each other to produce a 3D honeycomb‐like architecture, which is helpful to maximize bulk superplastic modulus.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“In nature, corks have been recognized as one of the oldest materials exploited by human beings because of their exceptional mechanical robustness.[ 14 , 15 , 16 ]”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process
Tillotson, T. M., & Hrubesh, L. W. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80427-2 · Cited by 343
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
Research works printed but not linked: 1
- M. Chanda S. K. Roy Plastics Technology Handbook (CRC Press Boca Raton FL 2007).
Cited by
Items 801–900 of 1,001
Stretching-dominated truss lattice materials: Elastic anisotropy evaluation, control, and design
Wang, S., Ma, Y., & Deng, Z. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.116004 · Cited by 32
Gao, M., He, D., Guo, X., Wu, H., Tan, Z. W., Xu, W., Shao, W., & Wang, G. (2022) · Structures · doi:10.1016/j.istruc.2022.08.050 · Cited by 32
Liquid metal lattice materials with simultaneously high strength and reusable energy absorption
Deng, F., Nguyen, Q., & Zhang, P. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101671 · Cited by 32
Layered La2Zr2O7 flexible fibrous membrane for super thermal insulation and infrared stealth
Ma, D., Xie, Y., Wang, L., Peng, Y., Yin, Y., Wang, X., Liu, B., Zhang, G., Zhu, L., & Xu, D. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143488 · Cited by 32
Mechanical deformation of carbon-nanotube-based aerogels
Shin, S. J., Kucheyev, S. O., Worsley, M. A., & Hamza, A. V. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.044 · Cited by 32
“Such graphitic nanoparticles forming ligament junctions are expected to be more defective and, hence, weaker than the CNT bundles themselves, acting as locations of failure events [13].”
BackgroundMuench, F., Schaefer, S., Hagelüken, L., Molina‐Luna, L., Duerrschnabel, M. T., Kleebe, H., Brötz, J., Vaskevich, A., Rubinstein, I., & Ensinger, W. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09398 · Cited by 32
Scalable synthesis of gyroid-inspired freestanding three-dimensional graphene architectures
Garcia, A. E., Wang, C. S., Sanderson, R. N., McDevitt, K. M., Zhang, Y., Valdevit, L., Mumm, D. R., Mohraz, A., & Ragan, R. (2019) · Nanoscale Advances · doi:10.1039/c9na00358d · Cited by 32
Self-citationCrush performance of additively manufactured maraging steel microlattice reinforced plates
Tallon, J., Cyr, E. D., Lloyd, A., & Mohammadi, M. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.104231 · Cited by 33
Archimedean lattices emerge in template-directed eutectic solidification
Kulkarni, A. A., Hanson, E., Zhang, R., Thornton, K. S., & Braun, P. V. (2020) · Nature · doi:10.1038/s41586-019-1893-9 · Cited by 32
Healable, memorizable, and transformable lattice structures made of stiff polymers
Yu, K., Du, H., Xin, A., Lee, K. H., Feng, Z., Masri, S. F., Chen, Y., Huang, G., & Wang, Q. (2020) · NPG Asia Materials · doi:10.1038/s41427-020-0208-9 · Cited by 32
Xing, Y., & Yang, J. (2021) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2021.103982 · Cited by 31
Xue, Q., Dong, N., Fan, P., Lin, D., Tian, G., Liu, J., Wei, J., Qi, S., & Wu, D. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152424 · Cited by 31
Yang, X., Tang, D., Wang, L., Wang, J., Ye, C., Liang, Y., Li, Y., & Tang, Y. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121063 · Cited by 31
Role of dislocation pile-ups in nucleation-controlled size-dependent strength of Fe nanowires
Kositski, R., & Mordehai, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.057 · Cited by 31
Salari‐Sharif, L., Godfrey, S. W., Tootkaboni, M., & Valdevit, L. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.11.003 · Cited by 31
“…with this technique has density of (cid:2) = 8900 kg/m 3 , Young’s modulus of E = 210 GPa, Poisson ratio of (cid:4) = 0.3 and yield strength of (cid:5) s = 2.5 GPa (this high strength value is a result of the fine nano-scale grain size of the Ni-P material deposited with this process [9,12,16]”
BackgroundMethodInfluentialSelf-citationQi, D., Hu, W., Xin, K., Zeng, Q., Xi, L., Tao, R., Liao, H., Deng, Y., Liao, B., & Wu, W. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112710 · Cited by 31
3D printed polymeric formwork for lattice cementitious composites
Song, J. Y., Cao, M., Cai, L., Zhou, Y., Chen, J., Liu, S., Zhou, B. R., Lü, Y., Zhang, J., Long, W.-J., et al. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103074 · Cited by 31
How to see hidden patterns in metamaterials with interpretable machine learning
Chen, Z., Ogren, A. C., Daraio, C., Brinson, L. C., & Rudin, C. D. (2022) · Extreme Mechanics Letters · doi:10.1016/j.eml.2022.101895 · Cited by 32
Suresh, A., Rowan, S. J., & Liu, C. (2022) · Advanced Materials · doi:10.1002/adma.202206416 · Cited by 31
Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect
Fleisch, M., Thalhamer, A., Meier, G., Huber, P. A. F., Fuchs, P., Pinter, G., Schlögl, S., & Berer, M. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.115952 · Cited by 31
Mechanical characterization of a novel gradient thinning triangular honeycomb
Han, J., Chen, H., Xu, X., Li, Z., Chen, Q., Gu, Z., & Gu, Z. (2023) · Thin-Walled Structures · doi:10.1016/j.tws.2023.110862 · Cited by 31
High-strength, lightweight nano-architected silica
Michelson, A. N., Flanagan, T. J., Lee, S., & Gang, O. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101475 · Cited by 32
Lantada, A. D., Sánchez, B. P., Murillo, C. G., & Sotillo, J. U. (2013) · Expert Review of Medical Devices · doi:10.1586/17434440.2013.827506 · Cited by 34
Polar and toroidal electromechanical properties designed by ferroelectric nano-metamaterials
Lich, L. V., Shimada, T., Sepideh, S., Wang, J., & Kitamura, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.006 · Cited by 31
Ishikawa, A., Kato, T., Takeyasu, N., Fujimori, K., & Tsuruta, K. (2017) · Applied Physics Letters · doi:10.1063/1.4986203 · Cited by 31
Hybrid Hollow Microlattices With Unique Combination of Stiffness and Damping
Salari‐Sharif, L., Schaedler, T. A., & Valdevit, L. (2017) · Journal of Engineering Materials and Technology · doi:10.1115/1.4038672 · Cited by 31
“Sacrificial dense polymeric lattices are fabricated by a self-propagating polymer waveguide polymerization process [26,27], and subsequently coated with the structural material of choice, before polymer removal [25,28].”
BackgroundMethodSelf-citationMetal-Based 3D-Printed Micro Parts #amp;amp; Structures
Song, X., Zhai, W., Huang, R., Fu, J., Fu, M. W., & Li, F. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819726-4.00009-0 · Cited by 31
Yan, S., Zhang, G., Li, F., Zhang, L., Wang, S., Zhao, H., Ge, Q., & Li, H. (2019) · Nanoscale · doi:10.1039/c9nr02071c · Cited by 30
Hollow-grained “Voronoi foam” ceramics with high strength and thermal superinsulation up to 1400 °C
Li, S., Wang, C., Yang, F., An, L., So, K., & Li, J. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.003 · Cited by 31
Zhu, S., Wang, B., Chen, L., Tan, X., & Ma, L. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106803 · Cited by 31
Recent advances in smart‐responsive hydrogels for tissue repairing
Hu, C., Yang, L., & Wang, Y. (2022) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.23 · Cited by 40
Liu, Y., Jiang, W., Hu, W., Lianling, R., Deng, E., Wang, Y., Song, C., & Feng, Q. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105498 · Cited by 30
Three-dimensional ori-kirigami metamaterials with multistability
Bai, Y., Wang, S., Zhou, X., & Beer, M. (2023) · Physical review. E · doi:10.1103/physreve.107.035004 · Cited by 30
Environment-adaptive, anti-fatigue thermal interface graphene foam
Chen, Y., Pang, K., Liu, X., Li, K., Li, K., Cai, S., Liu, Y., Xu, Z., & Gao, C. (2023) · Carbon · doi:10.1016/j.carbon.2023.118142 · Cited by 30
Entropic effects in the self-assembly of open lattices from patchy particles
Mao, X. (2013) · Physical Review E · doi:10.1103/physreve.87.062319 · Cited by 30
Corrosion‐Induced Strengthening: Development of High‐Strength Nanoporous Metals
Ye, X., & Jin, H. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500521 · Cited by 30
Sadeghian, R. B., Han, J., Ostrovidov, S., Salehi, S., Bahraminejad, B., Ahadian, S., Chen, M. W., & Khademhosseini, A. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2016.06.067 · Cited by 30
“They have a wide range of applications in gas and liquid filters, batteries, vibration-absorbing materials, heat exchangers, optics, etc. (Schaedler et al. 2011; Xia et al. 2015; Xiao et al. 2015) If the macroporous skeleton of the foam is covered by a mesoporous gold layer, the resulting network…”
BackgroundControlling three‐dimensional ice template via two‐dimensional surface wetting
Miao, Y., Wu, J., Bai, H., Xie, T., Zhao, Q., & Wong, T. (2016) · AIChE Journal · doi:10.1002/aic.15509 · Cited by 30
Microlattice Metamaterials for Tailoring Ultrasonic Transmission with Elastoacoustic Hybridization
Krödel, S., & Daraio, C. (2016) · Physical Review Applied · doi:10.1103/physrevapplied.6.064005 · Cited by 30
In-situ mechanics of 3D graphene foam based ultra-stiff and flexible metallic metamaterial
Nautiyal, P., Mujawar, M. A., Boesl, B., & Agarwal, A. K. (2018) · Carbon · doi:10.1016/j.carbon.2018.05.063 · Cited by 30
“Lightweight metallic microlattices (with achievable densities less than 10 mg/cm3) are characterized by efficient load transfer, recoverable deformation and energy absorption capabilities [29,30].”
BackgroundImpact of the Lattice Angle on the Effective Properties of the Octet-Truss Lattice Structure
Abdelhamid, M., & Czekanski, A. (2018) · Journal of Engineering Materials and Technology · doi:10.1115/1.4040409 · Cited by 30
Lightweight architected hollow sphere foams for simultaneous noise and vibration control
Jiang, H., & Chen, Y. (2019) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab22ee · Cited by 30
Al‐Rub, R. K. A., Abueidda, D., & Dalaq, A. S. (2015) · Advanced structured materials · doi:10.1007/978-3-319-19440-0_1 · Cited by 30
“However, due to the recent advances in threedimensional (3D) printing (Schaedler et al. 2011; Zheng et al. 2014), researchers can now move from computer-optimized material architectures that are designed using the concepts of structural mechanics directly to fabrication and testing.”
BackgroundXu, H., Liu, C., Mao, H., Bai, F., & Xu, T. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.03.023 · Cited by 29
Elastic shape recovery of carbon nanotube sponges in liquid oil
Gui, X., Zeng, Z., Cao, A., Lin, Z., Zeng, H., Xiang, R., Wu, T., Zhu, Y., & Tang, Z. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33686c · Cited by 29
Microstructure development during pack aluminization of nickel and nickel–chromium wires
Erdeniz, D., & Dunand, D. C. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.02.009 · Cited by 29
Kim, S. H., Jackson, J. A., Oakdale, J. S., Forien, J., Lenhardt, J. M., Yoo, J., Shin, S. J., Lepró, X., Moran, B. D., Aracne-Ruddle, C. M., et al. (2018) · Chemical Communications · doi:10.1039/c8cc05368e · Cited by 29
Hardening in Au-Ag nanoboxes from stacking fault-dislocation interactions
Patil, R. P., Doan, D., Aitken, Z. H., Chen, S., Kiani, M. T., Barr, C. M., Hattar, K., Zhang, Y., & Gu, X. W. (2020) · Nature Communications · doi:10.1038/s41467-020-16760-1 · Cited by 29
Nanographitic coating enables hydrophobicity in lightweight and strong microarchitected carbon
Kudo, A., & Bosi, F. (2020) · Communications Materials · doi:10.1038/s43246-020-00073-3 · Cited by 30
Abueidda, D., Kang, Z., Korić, S., James, K. A., & Jasiuk, I. (2020) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.6604 · Cited by 36
“Each objective has three different scenarios: (1) passive elements at the center, (2) passive elements close to the corners, and (3) initial design with random density distribution.”
BackgroundThe Twisting of Dome‐Like Metamaterial from Brittle to Ductile
Cheng, L., Tang, T., Yang, H., Hao, F., Wu, G., Lyu, F., Bu, Y. H., Zhao, Y., Zhao, Y., Liu, G., et al. (2021) · Advanced Science · doi:10.1002/advs.202002701 · Cited by 29
Stiff and strong, lightweight bi-material sandwich plate-lattices with enhanced energy absorption
Hsieh, M.-T., Ha, C. S., Xu, Z., Kim, S., Wu, H. F., Kunc, V., & Zheng, X. R. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00322-2 · Cited by 29
Advancing programmable metamaterials through machine learning-driven buckling strength optimization
Lee, S., Kwon, J., Kim, H., Ritchie, R. O., & Gu, G. X. (2024) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2024.101161 · Cited by 31
Water-responsive rapid recovery of natural cellular material
Shen, J., Xie, Y. M., Zhou, S., Huang, X., & Ruan, D. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.02.022 · Cited by 29
“For the wet specimen, the stress-strain behaviour was very similar to that of a metallic microlattice (Schaedler et al., 2011).”
ResultStress relaxation in polymeric microlattice materials
Krödel, S., Li, L., Constantinescu, A., & Daraio, C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.060 · Cited by 29
Metamaterials with engineered failure load and stiffness
Injeti, S. S., Daraio, C., & Bhattacharya, K. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1911535116 · Cited by 29
Yan, X. (2017) · Elsevier eBooks · doi:10.1016/b978-0-444-63591-4.00019-7 · Cited by 34
A Fabrication Strategy for Reconfigurable Millimeter‐Scale Metamaterials
McClintock, H. D., Doshi, N., Íñiguez‐Rábago, A., Weaver, J. C., Jafferis, N. T., Jayaram, K., Wood, R. J., & Overvelde, J. T. B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103428 · Cited by 31
Bird-inspired robotics principles as a framework for developing smart aerospace materials
Hoffmann, K. A., Chen, T. G., Cutkosky, M. R., & Lentink, D. (2023) · Journal of Composite Materials · doi:10.1177/00219983231152663 · Cited by 32
“These lattices use a hierarchical structure to achieve superior material properties relative to conventional implementations of the same base materials.(70) Like feathers (Biological context for the robot vignettes), each level of the hierarchy contributes to the overall behavior of the material.”
BackgroundInfluential3D Nanoprinting of Heterogeneous Metal Oxides with High Shape Fidelity
Hu, H., Deng, C., Gao, H., Han, T., Xue, S., Tang, Y., Zhang, M., Li, M., Liu, H., Deng, L., et al. (2024) · Advanced Materials · doi:10.1002/adma.202405053 · Cited by 28
Defect-sensitivity of stochastic and periodic minimal surface titanium cellular materials
Al-Jamal, A. A., Barsoum, I., & Al‐Rub, R. K. A. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110063 · Cited by 28
Cnoidal wave propagation in an elastic metamaterial
Mo, C., Singh, J., Raney, J. R., & Purohit, P. K. (2019) · Physical review. E · doi:10.1103/physreve.100.013001 · Cited by 28
Tavares, M. C., Weigand, J. M., Vieira, L. C. M., Almeida, S. J. C., & Szyniszewski, S. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105754 · Cited by 28
“[42] , only one of their configurations was in the elastic buckling region.”
BackgroundResultShockwave dissipation by interface-dominated porous structures
Dattelbaum, D. M., Ioniţă, A., Patterson, B. M., Branch, B. A., & Kuettner, L. A. (2020) · AIP Advances · doi:10.1063/5.0015179 · Cited by 33
Gribanova, T. N., Minyaev, R. M., Minkin, V. I., & Boldyrev, A. I. (2020) · Structural Chemistry · doi:10.1007/s11224-020-01606-9 · Cited by 28
On the accuracy of a homogenized continuum model of lattice structures in modal analyses
Panettieri, E., Boissin, E., Montemurro, M., Catapano, A., & Jalocha, D. (2021) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2021.1985196 · Cited by 28
“Accordingly, they are increasingly used in many real-world engineering applications, such as vibration insulators [10], thermal insulators [11–13], energy absorbers [14–16], ultralightweight sandwich panels [17] or biomedical implants [18–20].”
BackgroundWang, X., Lu, L., Yu, Z., Xu, X., Zheng, Y., & Yu, S. (2015) · Angewandte Chemie · doi:10.1002/ange.201410668 · Cited by 28
A Modified Three-Dimensional Negative-Poisson-Ratio Metal Metamaterial Lattice Structure
Li, F., Zhang, Q., Shi, H., & Liu, Z. (2022) · Materials · doi:10.3390/ma15113752 · Cited by 28
“Thus, lattice materials with NPR properties have widely been used in engineering because of their excellent fracture resistance [14–17], indentation resistance [18,19], sound absorption [20], and impact resistance [21].”
BackgroundNon-dissipative energy capture of confined liquid in nanopores
Xu, B., Chen, X., Lu, W., Zhao, C., & Qiao, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4878097 · Cited by 29
Re-entrant inclusions in cellular solids: From defects to reinforcements
Zorzetto, L., & Ruffoni, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.05.039 · Cited by 28
Holographic Fabrication of 3D Nanostructures
Jeon, T., Kim, D., & Park, S. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800330 · Cited by 28
Effect of pre-load on wave propagation characteristics of hexagonal lattices
Zhang, K., Su, Y.-C., Hou, X.-H., Meng, J.-M., & Deng, Z. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.07.033 · Cited by 28
Aktaş, K. G. (2024) · Mechanics of Time-Dependent Materials · doi:10.1007/s11043-024-09726-z · Cited by 27
“…negative Poisson’s ratio (Akamatsu et al. 2023; Aktas et al. 2024; Han et al. 2022a; Zhang et al. 2023b), being ultra lightweight (Han et al. 2022b; Schaedler et al. 2011; Zhang et al. 2022), having high stiffness (Chen et al. 2021; Zheng et al. 2014), and exhibiting sound and vibration…”
Shear deformation behavior of additively manufactured 316L stainless steel lattice structures
Lee, G., Jeong, S. G., Kwon, J., Ahn, S. Y., SaGong, M. J., Lee, K., & Kim, H. S. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104425 · Cited by 27
Chen, X., Chen, A., Zhang, L., Yu, H., Mao, Z., Chen, Y., Gu, J., Yan, C., & Lü, J. (2024) · Advanced bionics. · doi:10.1016/j.abs.2024.10.001 · Cited by 27
Irshad, M. S., Arshad, N., Maqsood, G., Asghar, M. S., Wu, P., Mushtaq, N., Shah, M. A. K. Y., Lin, L., Li, X., Ahmed, I., et al. (2024) · Small · doi:10.1002/smll.202407280 · Cited by 43
Yang, Y. S., Liu, H.-L., Yuan, J., Kong, W.-L., Wan, M., & Zhang, W. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.112425 · Cited by 27
Karamoozian, A., Tan, C. A., & Wang, L. (2018) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636218757670 · Cited by 27
“The deviation of moduli and peak strengths in FE simulations data and numerical predictions with test measured data are mainly due to various processing method-induced defects in real structures and has a notable effect in degrading the elastic stiffness rather than the strength of cellular metals [13,53,54].”
BackgroundPatil, G. U., & Matlack, K. H. (2019) · The Journal of the Acoustical Society of America · doi:10.1121/1.5091690 · Cited by 27
Duan, Y., Chen, X., Yin, B., Zhao, X., Zhao, Z., Hou, B., & Li, Y. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110179 · Cited by 27
Minimal-surface-based multiphase metamaterials with highly variable stiffness
Zheng, X., Watanabe, I., Wang, S., Chen, T., & Naito, M. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112548 · Cited by 28
Qu, Y., Chen, J., Jiao, L., Ye, T., & Hu, X. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117858 · Cited by 27
Wei, N., Wang, Q., Ma, Y., Ruan, L., Zeng, W. D., Liang, D., Xu, C., Huang, L., & Zhao, J. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.093 · Cited by 27
Emergence of New Density–Strength Scaling Law in 3D Hollow Ceramic Nanoarchitectures
Na, Y., Shin, D., Kim, K.-S., Ahn, C., Jeon, S., & Jang, D. (2018) · Small · doi:10.1002/smll.201802239 · Cited by 27
Multiaxial crushing of open-cell foams
Yang, C., & Kyriakides, S. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.10.005 · Cited by 27
Mechanical performances of four lattice materials guided by topology optimisation
Yang, C., Xu, P., Xie, S., & Yao, S. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.11.060 · Cited by 27
Dimensionless process development for lattice structure design in laser powder bed fusion
Großmann, A., Mölleney, J., Frölich, T., Merschroth, H., Felger, J., Weigold, M., Sielaff, A., & Mittelstedt, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108952 · Cited by 28
“hierarchical lattices [3] combining material-efficient production with new mechanical properties such as quasi-elastic behavior with complete recovery after N50% compression [4,5] and strength-to-density ratios, which are only notably surpassed by diamond [6].”
BackgroundA superhydrophobic 3D porous material for oil spill cleanup
Peng, L., Li, H., Zhang, Y., Su, J., Yu, P., & Luo, Y. (2014) · RSC Advances · doi:10.1039/c4ra06337f · Cited by 26
Ali, M., Nazir, A., & Jeng, J. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06227-4 · Cited by 26
Xu, L., Chen, H., Xi, L., Xiong, Y., Gao, J., & Li, Y. (2021) · Heat and Mass Transfer · doi:10.1007/s00231-021-03100-2 · Cited by 26
Effect of Cell Geometry on the Mechanical Properties of 3D Voronoi Tessellation
Alknery, Z., Sktani, Z. D. I., & Arab, A. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040302 · Cited by 26
“Because structural topologies have a significant influence on the mechanical behavior of cellular structures, attempts have been devoted to developing deterministic materials with novel mechanical properties [14,15].”
BackgroundXie, B., Li, X., Zhao, X., & Hu, N. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.116850 · Cited by 26
Farzanian, S., Louhghalam, A., Schafer, B. W., & Tootkaboni, M. (2023) · Thin-Walled Structures · doi:10.1016/j.tws.2023.110619 · Cited by 26
Bai, L., Xu, W., Wang, W., & Cheng, S. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106311 · Cited by 26
On the evolution of cured voxel in bulk photopolymerization upon focused Gaussian laser exposure
Bhole, K. S., Gandhi, P. S., & Kundu, T. (2014) · Journal of Applied Physics · doi:10.1063/1.4891109 · Cited by 26
Gutekunst, S. B., Siemsen, K., Huth, S., Möhring, A., Hesseler, B., Timmermann, M., Paulowicz, I., Mishra, Y. K., Siebert, L., Adelung, R., et al. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01009 · Cited by 28
Angle‐Dependent Transitions Between Structural Bistability and Multistability
Yang, H., & Ma, L. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201900871 · Cited by 26
Application of micro-robots for building carbon fiber trusses
Hsu, A. L., Wong-Foy, A., McCoy, B., Cowan, C. K., Marlow, J., Chavez, B., Kobayashi, T., Shockey, D., & Pelrine, R. (2016) · International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS) · doi:10.1109/marss.2016.7561729 · Cited by 26
“However, while trusses have been most commonly used on the length scale of meters to kilometers, recent work has begun exploring similar truss concepts on the millimeter and micron scales [2-8].”
Vitalis, T., Gross, A. J., Tzortzinis, G., Schagen, B., & Gerasimidis, S. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139165 · Cited by 26
Design, fabrication, and characterization of solid–liquid dual-state mechanical metamaterials
Tan, X., Ma, J., Liu, S., Cao, B., Chen, X., Wang, B., & Kadic, M. (2026) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2026.113865 · Cited by 25
Metadata
- Authors
- Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B.
- Affiliations
- HRL Laboratories (United States) (US)
- University of California, Irvine (US)
- California Institute of Technology (US)
- Corresponding author
- Schaedler, T. A.
- Venue
- Science
- Published
- 2011-11-18
- Volume
- 334
- Issue
- 6058
- Pages
- 962-965
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2077098498
- Cited by
- 1,784
- References
- 25
- Citations by year
- 2026: 112 · 2025: 144 · 2024: 124 · 2023: 166 · 2022: 144 · 2021: 156 · 2020: 137 · 2019: 157 · 2018: 144 · 2017: 141 · 2016: 104 · 2015: 105 · 2014: 56 · 2013: 50 · 2012: 42
- FWCI
- 84.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- CaltechAUTHORS (California Institute of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Keywords
- ultralight materials, cellular materials, electroless nickel plating, template etching, energy absorption, hierarchy, compression recovery, thermal insulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.