Ultralight Metallic Microlattices
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
A route is developed for fabricating extremely low-density, hollow-strut metallic lattices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In corks microstructure, one‐dimensional (1D) nanofibers of cell walls intimately align in a highly oriented manner to reach reasonable strength.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“Further, an individual cell of tens of micrometers in size intricately connects with each other to produce a 3D honeycomb‐like architecture, which is helpful to maximize bulk superplastic modulus.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“In nature, corks have been recognized as one of the oldest materials exploited by human beings because of their exceptional mechanical robustness.[ 14 , 15 , 16 ]”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process
Tillotson, T. M., & Hrubesh, L. W. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80427-2 · Cited by 343
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
Research works printed but not linked: 1
- M. Chanda S. K. Roy Plastics Technology Handbook (CRC Press Boca Raton FL 2007).
Cited by
Items 601–700 of 1,001
Optimal design of “Shellular”, a micro-architectured material with ultralow density
Nguyen, B. D., Cho, J. S., & Kang, K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.126 · Cited by 51
Blowing Route towards Advanced Inorganic Foams
Wang, X., Jiang, X., & Bando, Y. (2018) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20180271 · Cited by 51
Piezoresistive and Mechanical Characteristics of Graphene Foam Nanocomposites
Patole, S. P., Reddy, S. K., Schiffer, A., Askar, K. A., Prusty, B. G., & Kumar, S. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b02306 · Cited by 51
Shang, Y., Li, X., Huang, S., Chen, S., Yang, Z., Guo, L., & Yang, H. Y. (2019) · Matter · doi:10.1016/j.matt.2019.10.027 · Cited by 53
A Multi-Cell Hybrid Approach to Elevate the Energy Absorption of Micro-Lattice Materials
Xiao, L., Xu, X. J., Song, W., & Hu, M.-L. M. (2020) · Materials · doi:10.3390/ma13184083 · Cited by 51
Li, J., Chen, Z., Li, Q., Jin, L., & Zhao, Z. (2022) · Advanced Science · doi:10.1002/advs.202105769 · Cited by 50
Discovery of quasi-disordered truss metamaterials inspired by natural cellular materials
Bhuwal, A. S., Pang, Y., Ashcroft, I., Sun, W., & Liu, T. (2023) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2023.105294 · Cited by 50
Additively Manufactured Dual‐Faced Structured Fabric for Shape‐Adaptive Protection
Tian, Y., Chen, K., Zheng, H. Y., Kripalani, D. R., Zeng, Z., Jarlöv, A., Chen, J., Bai, L., Ong, A. C. Y., Du, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202301567 · Cited by 50
Liu, Y., Wang, X., Wan, W., Li, L., Dong, Y., Zhao, Z., & Qiu, J. (2015) · Nanoscale · doi:10.1039/c5nr05909g · Cited by 50
Soft Colloidal Scaffolds Capable of Elastic Recovery after Large Compressive Strains
Rajamanickam, R., Kumari, S., Kumar, D., Ghosh, S., Kim, J. C., Tae, G., Gupta, S. S., & Kumaraswamy, G. (2014) · Chemistry of Materials · doi:10.1021/cm502643a · Cited by 50
Mechanical performance of hollow tetrahedral truss cores
Clough, E. C., Ensberg, J., Eckel, Z. C., Ro, C. J., & Schaedler, T. A. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.04.006 · Cited by 50
Self-citationHao, C., Wang, B., Wen, F., Mu, C., Xiang, J., Li, L., & Liu, Z. (2018) · Nanotechnology · doi:10.1088/1361-6528/aab83a · Cited by 50
Mu, P., Sun, H., Zhu, Z., He, J., Liang, W., & Li, A. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03493a · Cited by 50
Sound absorption by acoustic microlattice with optimized pore configuration
Cai, X., Yang, J., Hu, G., & Lu, T. (2018) · The Journal of the Acoustical Society of America · doi:10.1121/1.5051526 · Cited by 50
Multiscale topology optimization for coated structures with multifarious-microstructural infill
Chu, S., Gao, L., Xiao, M., & Zhang, Y. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02428-y · Cited by 50
Li, Y., Gong, L., Xu, M., & Joshi, Y. K. (2020) · Journal of Electronic Packaging · doi:10.1115/1.4048861 · Cited by 50
3D Printed Template‐Directed Assembly of Multiscale Graphene Structures
Zhou, J., Wu, X., Chen, Y., Yang, C., Yang, R., Tan, J., Liu, Y., Qiu, L., & Cheng, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202105879 · Cited by 53
Bian, Y., Wang, R., Yang, F., Li, P., Song, Y., Feng, J., Wu, W., Li, Z., & Lü, Y. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c20063 · Cited by 49
Guo, X. Y., Wang, E., Yang, H., & Zhai, W. (2024) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2024.105711 · Cited by 49
Ordered 3D Thin‐Shell Nanolattice Materials with Near‐Unity Refractive Indices
Zhang, X. A., Bagal, A., Dandley, E. C., Zhao, J., Oldham, C. J., Wu, B., Parsons, G. N., & Chang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502854 · Cited by 49
Free-Standing Networks of Core–Shell Metal and Metal Oxide Nanotubes for Glucose Sensing
Muench, F., Sun, L., Kottakkat, T., Antoni, M., Schaefer, S., Kunz, U., Molina‐Luna, L., Duerrschnabel, M. T., Kleebe, H., Ayata, S., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13979 · Cited by 49
Sound transmission loss characteristics of sandwich panels with a truss lattice core
Moosavimehr, S. E., & Phani, A. S. (2017) · The Journal of the Acoustical Society of America · doi:10.1121/1.4979934 · Cited by 49
Zhang, X., Liu, P., Duan, Y., Jiang, M. H., & Zhang, J. (2017) · RSC Advances · doi:10.1039/c6ra28178h · Cited by 50
Three-Dimensional Nanoprinting via Direct Delivery
de Souza, J. V., Liu, Y., Wang, S., Dörig, P., Kuhl, T. L., Frommer, J., & Liu, G.-Y. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b06978 · Cited by 49
Qi, G., & Ma, L. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.12.071 · Cited by 49
High strength metallic wood from nanostructured nickel inverse opal materials
Pikul, J. H., Özerinç, S., Liu, B., Zhang, R., Braun, P. V., Deshpande, V. S., & King, W. P. (2019) · Scientific Reports · doi:10.1038/s41598-018-36901-3 · Cited by 49
Jin, N., Wang, F., Wang, Y., Zhang, B., Cheng, H., & Zhang, H. (2019) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2019.06.002 · Cited by 49
Self-Limiting Electrospray Deposition for the Surface Modification of Additively Manufactured Parts
Kovacevich, D. A., Lei, L., Han, D., Kuznetsova, C., Kooi, S. E., Lee, H., & Singer, J. P. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b23544 · Cited by 49
Chen, Y., Zhang, L., He, C., He, R., Xu, B., & Li, Y. (2021) · Aerospace Science and Technology · doi:10.1016/j.ast.2021.106539 · Cited by 49
Li, H., Jia, D., Ding, M., Zhou, L., Wang, K., Liu, J., Liu, C., & Li, C. (2021) · Solar RRL · doi:10.1002/solr.202100317 · Cited by 50
Rigid and flexible polyimide aerogels with less fatigue for use in harsh conditions
Yuan, R., Zhou, Y., Lü, X., Dong, Z., & Lu, Q. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131193 · Cited by 49
Nanoporous black silver film with high porosity for efficient solar steam generation
Yu, B., Wang, Y., Zhang, Y., & Zhang, Z. (2022) · Nano Research · doi:10.1007/s12274-022-5068-x · Cited by 48
Programmable Bidirectional Folding of Metallic Thin Films for 3D Chiral Optical Antennas
Mao, Y., Zheng, Y., Li, C., Guo, L. J., Pan, Y., Zhu, R., Xu, J., Zhang, W., & Wu, W. (2017) · Advanced Materials · doi:10.1002/adma.201606482 · Cited by 48
Controlling shockwave dynamics using architecture in periodic porous materials
Branch, B. A., Ioniţă, A., Clements, B. E., Montgomery, D. S., Jensen, B. J., Patterson, B. M., Schmalzer, A. M., Mueller, A. H., & Dattelbaum, D. M. (2017) · Journal of Applied Physics · doi:10.1063/1.4978910 · Cited by 48
Topology optimization of multiphase architected materials for energy dissipation
Asadpoure, A., Tootkaboni, M., & Valdevit, L. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.07.007 · Cited by 48
Self-citationMultiscale topology optimization for non-uniform microstructures with hybrid cellular automata
Jia, J., Da, D., Loh, C.-L., Zhao, H., Yin, S., & Xu, J. (2020) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-020-02533-3 · Cited by 48
“The Table 5 The resulting microtopologies expressions MP ¼ ∑ M m¼1 4Pm 1−Pmð Þ=M 100% and Mrk ¼ ∑ N n¼1 4rkn 1−rknð Þ=N 100% (Sigmund 2007) are adopted to measure the discreteness of macro and microdesign variables.”
High strain-rate compression behavior of polymeric rod and plate Kelvin lattice structures
Weeks, J. S., & Ravichandran, G. (2022) · Mechanics of Materials · doi:10.1016/j.mechmat.2022.104216 · Cited by 48
Design of the P-surfaced shellular, an ultra-low density material with micro-architecture
Nguyen, B. D., Han, S. C., Jung, Y. C., & Kang, K. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.07.025 · Cited by 48
Self-assembly of 2D MnO2nanosheets into high-purity aerogels with ultralow density
Liu, Z., Xu, K., She, P., Yin, S., Zhu, X., & Sun, H. (2016) · Chemical Science · doi:10.1039/c5sc03217b · Cited by 46
A 3D metamaterial with negative stiffness for six-directional energy absorption and cushioning
Guo, S., Gao, R., Tian, X., & Liu, S. (2022) · Thin-Walled Structures · doi:10.1016/j.tws.2022.109963 · Cited by 47
Advanced Fabrication of Mechanical Metamaterials Based on Micro/Nanoscale Technology
Chen, Z., Lin, Y.-T., Salehi, H., Che, Z., Zhu, Y., Ding, J., Sheng, B., Zhu, R., & Jiao, P. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300750 · Cited by 52
Wu, X., Yan, H., Zhou, Y., Zhang, P., Lu, Q., & Shi, H. (2024) · Optics & Laser Technology · doi:10.1016/j.optlastec.2024.112066 · Cited by 47
Surjadi, J. U., Wang, L., Qu, S., Aymon, B. F. G., Ding, J., Zhou, X., Fan, R., Yang, H., Zhao, Q. L., Song, X., et al. (2025) · Science Advances · doi:10.1126/sciadv.adt0589 · Cited by 47
“Particularly, metallic lattices have garnered substantial attention due to their ability to combine metal/alloy toughening mechanisms with stiff and strong architectures, achieving remarkable combinations of low density, high strength, and energy dissipation ( 5 – 9 ).”
Nickel-nitride-coated nickel foam as a counter electrode for dye-sensitized solar cells
Park, S. H., Cho, Y., Choi, M., Choi, H., Kang, J. S., Um, J. H., Choi, J., Choe, H., & Sung, Y. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.10.030 · Cited by 47
Evaluating sputter deposited metal coatings on 3D printed polymer micro-truss structures
Juarez, T., Schroer, A., Schwaiger, R., & Hodge, A. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.005 · Cited by 47
Theoretical search for heterogeneously architected 2D structures
Yang, W., Liu, Q., Gao, Z., Yue, Z., & Xu, B. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1806769115 · Cited by 49
Fracture of three-dimensional lattices manufactured by selective laser melting
Gu, H., Li, S., Pavier, M. J., Attallah, M. M., Paraskevoulakos, C., & Shterenlikht, A. (2019) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2019.07.020 · Cited by 50
“Unique mechanical properties can be achieved with very low density by manipulating topology and size of unit cell[5, 6, 7].”
BackgroundHierarchical porous materials made by stereolithographic printing of photo-curable emulsions
Kleger, N., Minas, C., Bosshard, P., Mattich, I., Masania, K., & Studart, A. R. (2021) · Scientific Reports · doi:10.1038/s41598-021-01720-6 · Cited by 47
Crack‐Induced Superelastic, Strength‐Tunable Carbon Nanotube Sponges
Ye, Z., Zhao, B., Wang, Q., Chen, K. L., Su, M. R., Xia, Z., Han, L., Li, M., Kong, X., Shang, Y., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202303475 · Cited by 46
Nature’s Load-Bearing Design Principles and Their Application in Engineering: A Review
Breish, F., Hamm, C. E., & Andresen, S. (2024) · Biomimetics · doi:10.3390/biomimetics9090545 · Cited by 48
“Cellular solids found in pomelo peels, cancellous bone, and plant stems have been mimicked to produce bio-inspired foams and lattice structures with remarkable impact absorption properties [148–162].”
BackgroundLin, Z., Gui, X., Gan, Q., Chen, W., Cheng, X., Liu, M., Zhu, Y., Yang, Y., Cao, A., & Tang, Z. (2015) · Scientific Reports · doi:10.1038/srep11336 · Cited by 46
Wang, Y., Uetani, K., Liu, S., Zhang, X., Wang, Y., Lü, P., Wei, T., Fan, Z., Shen, J., Yu, H., et al. (2016) · ChemNanoMat · doi:10.1002/cnma.201600266 · Cited by 46
Zhang, H., Cheng, X., Yan, D., Zhang, Y., & Fang, D. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107822 · Cited by 46
Chen, Y., Hu, L., Li, C., Dang, B., Sun, Q., Zhai, T., & Li, H. (2020) · InfoMat · doi:10.1002/inf2.12075 · Cited by 46
Bézier-based metamaterials: Synthesis, mechanics and additive manufacturing
Álvarez‐Trejo, A., Cuan‐Urquizo, E., Roman‐Flores, A., Trapaga, G., & Alvarado-Orozco, J. M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109412 · Cited by 52
Shock Compression Behavior of Stainless Steel 316L Octet-Truss Lattice Structures
Weeks, J. S., Gandhi, V., & Ravichandran, G. (2022) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2022.104324 · Cited by 45
Zhou, J., Wu, E., Hu, Y., Jiang, M., Liu, C., Xue, L., Li, H., Liu, Y., & Zhuang, X. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159507 · Cited by 46
Yuan, B., Zheng, P., Gao, Y., Zhu, M. H., & Dunand, D. C. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.05.001 · Cited by 45
Stanev, L., Kolev, M., Drenchev, B., & Drenchev, L. B. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4034439 · Cited by 45
Silva, R. G., Torres, M. J., Viñuela, J. Z., & González-Zamora, A. (2021) · Polymers · doi:10.3390/polym13040635 · Cited by 46
“Similar behavior has been reported previously for SLA lattices [26], and other materials [47,48].”
ResultJiang, B., He, C., Zhao, N., Nash, P., Shi, C., & Wang, Z. (2015) · Scientific Reports · doi:10.1038/srep13825 · Cited by 44
“In the sandwich structure, the Ag coating was produced by the silver mirror reaction and the Ni films should remain as a supersaturated solid solution of phosphorous in a crystalline face-centered cubic nickel lattice after deposition 6 .”
Ultra‐strong and Low‐Density Nanotubular Bulk Materials with Tunable Feature Sizes
Biener, M. M., Ye, J., Baumann, T. F., Wang, Y., Shin, S. J., Biener, J., & Hamza, A. V. (2014) · Advanced Materials · doi:10.1002/adma.201400249 · Cited by 44
Optimal mechanical design of tetrahedral truss cores for sandwich constructions
Dragoni, E. (2013) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636213487364 · Cited by 44
The indentation response of Nickel nano double gyroid lattices
Khaderi, S. N., Scherer, M. R. J., Hall, C. E., Steiner, U., Ramamurty, U., Fleck, N. A., & Deshpande, V. S. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.08.006 · Cited by 44
Zhang, H., Lin, C. Y., Han, T., Du, F., Zhao, Y., Li, X., & Sun, Y. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00578 · Cited by 44
Kaya, A. C., Zaslansky, P., İpekoğlu, M., & Fleck, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.009 · Cited by 44
Yeo, S. J., Oh, M. J., Jun, H. M., Lee, M., Bae, J. G., Kim, Y., Park, K. J., Lee, S., Lee, D., Weon, B. M., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802997 · Cited by 44
Lei, Y., Zhu, Z., Sun, H., Mu, P., Liang, W., & Li, A. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117020 · Cited by 44
3D direct printing of mechanical and biocompatible hydrogel meta-structures
Zhang, L., Lee, W., Li, X., Jiang, Y., Fang, N. X., Dai, G., & Liu, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.08.015 · Cited by 51
Chen, J., Wang, H., Wang, K., Wei, Z., Xu, W., & Wei, K. (2021) · Mechanics of Materials · doi:10.1016/j.mechmat.2021.104176 · Cited by 44
Geometrical parameters and mechanical properties of Ti6Al4V hollow-walled lattices
Noronha, J., Leary, M., Qian, M., Kyriakou, E., & Brandt, M. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.142667 · Cited by 47
Wang, F., Dou, L., Dai, J., Li, Y., Huang, L., Si, Y., Yu, J., & Ding, B. (2020) · Angewandte Chemie · doi:10.1002/ange.202001679 · Cited by 44
Enhanced stiffness, strength and energy absorption for co-continuous composites with liquid filler
Liu, Y., & Wang, L. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.03.064 · Cited by 44
“Therefore, we have compared the specific elastic modulus E=q of the porous structures and the co-continuous composites studied in this work, and also other porous materials reported in previous literature [1,29,30,32], as shown in Fig.”
BackgroundResultInfluentialCellular carbon microstructures developed by using stereolithography
Chen, X., Zhao, G., Wu, Y., Huang, Y., Liu, Y., He, J., Wang, L., Lian, Q., & Li, D. (2017) · Carbon · doi:10.1016/j.carbon.2017.07.043 · Cited by 44
Yang, F., Zhao, S., Chen, G., Li, K., Fei, Z., Mummery, P., & Zi-chun, Y. (2023) · Advanced Powder Materials · doi:10.1016/j.apmate.2023.100153 · Cited by 43
Ti–6Al–4V hybrid-strut lattice metamaterials: A design strategy for improved performance
Noronha, J., Dash, J., Downing, D., Rogers, J., Qian, M., Brandt, M., & Leary, M. (2024) · Materials Science and Engineering A · doi:10.1016/j.msea.2024.146918 · Cited by 43
Meta-structure of amorphous-inspired 65.1Co28.2Cr5.3Mo lattices augmented by artificial intelligence
Park, S. J., Heogh, W., Yang, J., Kang, S., Jeong, W., Lee, H., Jang, T., Jung, H., Jahazi, M., Han, S. C., et al. (2024) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-024-01039-6 · Cited by 43
Ductility and work hardening in nano-sized metallic glasses
Chen, D., Gu, X. W., An, Q., Goddard, W. A., & Greer, J. R. (2015) · Applied Physics Letters · doi:10.1063/1.4907773 · Cited by 43
Self-citationHierarchical ferroelectric and ferrotoroidic polarizations coexistent in nano-metamaterials
Shimada, T., Lich, L. V., Nagano, K., Wang, J., & Kitamura, T. (2015) · Scientific Reports · doi:10.1038/srep14653 · Cited by 43
Tunable wave propagation in octa-chiral lattices with local resonators
Zhang, K., Su, Y.-C., Zhao, P., & Deng, Z. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.03.076 · Cited by 43
Deng, B., & Cheng, G. J. (2020) · Materials Horizons · doi:10.1039/d0mh01408g · Cited by 43
The low velocity impact response of sandwich panels with lattice core reinforcement
Hundley, J. M., Clough, E. C., & Jacobsen, A. J. (2015) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2015.05.009 · Cited by 43
Self-citationSakshiKokil-Shah, Sur, A., Darvekar, S. K., & Shah, M. (2021) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-021-05992-y · Cited by 42
“[24] focused on the design and development of crash-proof structure, which can sustain crash for vehicle application.”
BackgroundHybrid manufacturing of AlSi10Mg metamaterials: Process, static and impact response attributes
Singh, A., Al‐Ketan, O., & Karathanasopoulos, N. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.11.128 · Cited by 42
Ultra‐Stretchable Kirigami Piezo‐Metamaterials for Sensing Coupled Large Deformations
Hong, L., Zhang, H., Kraus, T., & Jiao, P. (2023) · Advanced Science · doi:10.1002/advs.202303674 · Cited by 44
Ultra‐Stiff yet Super‐Elastic Graphene Aerogels by Topological Cellular Hierarchy
Xia, Y., Qin, H., Tong, W., Qi, Y., Li, K., Liu, Y., Xu, Z. Y., Liu, Y., Pang, K., Gao, C., et al. (2024) · Advanced Materials · doi:10.1002/adma.202417462 · Cited by 43
Effects of pore design on mechanical properties of nanoporous silicon
Winter, N., Becton, M., Zhang, L., & Wang, X. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.11.006 · Cited by 42
Fan, Q., Gao, Y. P., Zhao, Y., Yang, Q., Guo, L., & Jiang, L. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.12.065 · Cited by 42
Gümrük, R., Mines, R. A. W., & Karadeniz, S. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-018-3208-y · Cited by 42
Analysis of Multi-scale Mechanical Properties of Ceramic Trusses Prepared from Preceramic Polymers
Brodnik, N. R., Schmidt, J. E. M., Colombo, P., & Faber, K. T. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100957 · Cited by 42
Topology optimization design of quasi-periodic cellular structures based on erode–dilate operators
Li, Q., Xu, R., Wu, Q., & Liu, S. (2021) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2021.113720 · Cited by 42
Intrigila, C., Micheletti, A., Nodargi, N. A., Artioli, E., & Bisegna, P. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102946 · Cited by 42
3D Printed Graphene‐Based Metamaterials: Guesting Multi‐Functionality in One Gain
Du, J., Fu, G., Xu, X., Elshahawy, A. M., & Guan, C. (2023) · Small · doi:10.1002/smll.202207833 · Cited by 42
Exploring Deformation Mechanisms in Nanostructured Materials
Greer, J. R., Jang, D., & Gu, X. W. (2012) · JOM · doi:10.1007/s11837-012-0438-6 · Cited by 42
Self-citationDisorder enhances the fracture toughness of 2D mechanical metamaterials
Fulco, S., Budzik, M. K., Xiao, H., Durian, D. J., & Turner, K. T. (2025) · PNAS Nexus · doi:10.1093/pnasnexus/pgaf023 · Cited by 41
Topology optimization methods and its applications in aerospace: a review
Li, P., Xiuli, S., Dong, S., & Fang, Y. (2025) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-025-04030-x · Cited by 41
“However, traditional thin-walled filled/thin-walled lattice structures are limited in type, restricting design freedom and potentially hindering the achievement of optimal structural performance (Schaedler et al. 2011; Wang et al. 2016b).”
Zheng, X., Jiang, Y., Mete, M., Li, J., Watanabe, I., Yamada, T., & Paik, J. K. (2025) · Science Robotics · doi:10.1126/scirobotics.adx1519 · Cited by 49
Xu, B., Yin, S., Wang, Y., Li, H., Zhang, B., & Ritchie, R. O. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.03.002 · Cited by 41
In Situ Mechanical Characterization of Structural Bamboo Materials under Flexural Bending
Song, J. Y., Gao, L., & Lü, Y. (2017) · Experimental Techniques · doi:10.1007/s40799-017-0202-5 · Cited by 41
“In general, bamboo culm separated by nodes composes of vascular bundles, fibers and parenchyma cells [19] as shown in Fig.”
BackgroundSchroer, A., Wheeler, J. M., & Schwaiger, R. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.485 · Cited by 41
Metadata
- Authors
- Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B.
- Affiliations
- HRL Laboratories (United States) (US)
- University of California, Irvine (US)
- California Institute of Technology (US)
- Corresponding author
- Schaedler, T. A.
- Venue
- Science
- Published
- 2011-11-18
- Volume
- 334
- Issue
- 6058
- Pages
- 962-965
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2077098498
- Cited by
- 1,784
- References
- 25
- Citations by year
- 2026: 112 · 2025: 144 · 2024: 124 · 2023: 166 · 2022: 144 · 2021: 156 · 2020: 137 · 2019: 157 · 2018: 144 · 2017: 141 · 2016: 104 · 2015: 105 · 2014: 56 · 2013: 50 · 2012: 42
- FWCI
- 84.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- CaltechAUTHORS (California Institute of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Keywords
- ultralight materials, cellular materials, electroless nickel plating, template etching, energy absorption, hierarchy, compression recovery, thermal insulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.