Ultralight Metallic Microlattices
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
A route is developed for fabricating extremely low-density, hollow-strut metallic lattices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In corks microstructure, one‐dimensional (1D) nanofibers of cell walls intimately align in a highly oriented manner to reach reasonable strength.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“Further, an individual cell of tens of micrometers in size intricately connects with each other to produce a 3D honeycomb‐like architecture, which is helpful to maximize bulk superplastic modulus.”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
In the citing paper
“In nature, corks have been recognized as one of the oldest materials exploited by human beings because of their exceptional mechanical robustness.[ 14 , 15 , 16 ]”
From Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis (2021) · cites this paper as [16]
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Materials with structural hierarchy
Lakes, R. (1993) · Nature · doi:10.1038/361511a0 · Cited by 1,402
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Transparent ultralow-density silica aerogels prepared by a two-step sol-gel process
Tillotson, T. M., & Hrubesh, L. W. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80427-2 · Cited by 343
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
Research works printed but not linked: 1
- M. Chanda S. K. Roy Plastics Technology Handbook (CRC Press Boca Raton FL 2007).
Cited by
Items 301–400 of 1,001
Amendola, A., Smith, C. J. M., Goodall, R., Auricchio, F., Feo, L., Benzoni, G., & Fraternali, F. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.01.091 · Cited by 120
“Such an observation leads us to conclude that SPM specimens exhibit bendingdominated response under the examined tests [21,22].”
ResultLi, T., Hu, X., Chen, Y., & Wang, L. (2017) · Scientific Reports · doi:10.1038/s41598-017-09218-w · Cited by 120
“= = x f N Q z f N Q ( , ) and ( , ), (3) end end 1 0 0 2 0 0 Figure 3.”
Programmable, active lattice structures: Unifying stretch-dominated and bending-dominated topologies
Wagner, M. A., Lumpe, T. S., Chen, T., & Shea, K. (2019) · Extreme Mechanics Letters · doi:10.1016/j.eml.2019.100461 · Cited by 124
Zhao, K., Zhang, T., Chang, H., Yang, Y., Xiao, P., Zhang, H., Li, C., Tiwary, C. S., Ajayan, P. M., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aav2589 · Cited by 120
“In addition, from a structural view, the large void space between the walls offers the compress/release cushion space (Supplementary Discussion) and avoids local stress concentration at weak points (2, 14).”
BackgroundInfluentialMechanical design and energy absorption performances of rational gradient lattice metamaterials
Zhang, P., Qi, D., Xue, R., Liu, K., Wu, W., & Li, Y. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114606 · Cited by 119
Wang, F., Si, Y., Yu, J., & Ding, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107223 · Cited by 119
Prediction of the mechanical properties of micro-lattice structures subjected to multi-axial loading
USHIJIMA, K., Cantwell, W. J., & Chen, D. H. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.017 · Cited by 118
Inverse design of truss lattice materials with superior buckling resistance
Maurizi, M., Gao, C., & Berto, F. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00938-w · Cited by 123
A Bubble‐Derived Strategy to Prepare Multiple Graphene‐Based Porous Materials
Zhang, R., Hu, R., Li, X., Zhen, Z., Xu, Z., Li, N., He, L., & Zhu, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705879 · Cited by 117
Huang, T., Zhu, Y., Zhu, J., Yu, H., Zhang, Q., & Zhu, M. (2020) · Advanced Fiber Materials · doi:10.1007/s42765-020-00054-8 · Cited by 117
Architected Multimaterial Lattices with Thermally Programmable Mechanical Response
Mueller, J., Lewis, J. A., & Bertoldi, K. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105128 · Cited by 120
Wu, S., Li, H., Futaba, D. N., Chen, G., Chen, C., Zhou, K., Zhang, Q., Li, M., Ye, Z., & Xu, M. H. (2022) · Advanced Materials · doi:10.1002/adma.202201046 · Cited by 116
Printing mesoscale architectures
Raney, J. R., & Lewis, J. A. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.235 · Cited by 120
Shu, D., Feng, F., Han, H., & Ma, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.136 · Cited by 115
Xiao, L., Feng, G., Li, S., Mu, K., Qin, Q., & Song, W. (2022) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2022.104333 · Cited by 115
McCue, I., Ryan, S., Hemker, K. J., Xu, X., Li, N., Chen, M. W., & Erlebacher, J. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500219 · Cited by 115
Xiong, J., Ma, L., Vaziri, A., Yang, J., & Wu, L. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.004 · Cited by 114
Sun, Y., Xu, S., Ortíz‐Ledón, C. A., Zhu, J., Chen, S., & Duan, J. (2021) · Exploration · doi:10.1002/exp.20210021 · Cited by 113
Titanium Multi‐Topology Metamaterials with Exceptional Strength
Noronha, J., Dash, J., Rogers, J., Leary, M., Brandt, M., & Qian, M. (2023) · Advanced Materials · doi:10.1002/adma.202308715 · Cited by 113
Fatigue behavior of IN718 microtrusses produced via additive manufacturing
Huynh, L., Rotella, J., & Sangid, M. D. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.032 · Cited by 113
Laser jetting of femto-liter metal droplets for high resolution 3D printed structures
Zenou, M., Sa'ar, A., & Kotler, Z. (2015) · Scientific Reports · doi:10.1038/srep17265 · Cited by 112
Extraordinary tensile strength and ductility of scalable nanoporous graphene
Kashani, H., Ito, Y., Han, J., Liu, P., & Chen, M. (2019) · Science Advances · doi:10.1126/sciadv.aat6951 · Cited by 112
“Both tension and compression strengths and moduli of the high-quality nanoporous graphene are obviously higher than those of cellular graphene assemblies (11, 17, 18, 28) and metallic lattices (29) in the entire density range of this study (fig.”
Du, Y., Gu, D., Xi, L., Dai, D., Gao, T., Zhu, J., & Ma, C. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138857 · Cited by 112
Cu2Se-based thermoelectric cellular architectures for efficient and durable power generation
Choo, S., Ejaz, F., Ju, H., Kim, F., Lee, J., Yang, S. E., Kim, G., Kim, H., Jo, S., Baek, S., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-23944-w · Cited by 112
Initiator-Integrated 3D Printing Enables the Formation of Complex Metallic Architectures
Wang, X., Guo, Q., Cai, X., Zhou, S., Kobe, B. A., & Yang, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4050822 · Cited by 111
Solid State Porous Metal Production: A Review of the Capabilities, Characteristics, and Challenges
Atwater, M. A., Guevara, L. N., Darling, K. A., & Tschopp, M. A. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700766 · Cited by 111
Metals by Micro‐Scale Additive Manufacturing: Comparison of Microstructure and Mechanical Properties
Reiser, A., Koch, L., Dunn, K. A., Matsuura, T., Iwata, F., Fogel, O., Kotler, Z., Zhou, N., Charipar, K. M., Piqué, A., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910491 · Cited by 111
Li, J., An, X., Liang, J., Zhou, Y., & Sun, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.10.041 · Cited by 111
Design and characterization of 3D AuxHex lattice structures
Guo, M.-F., Yang, H., & Ma, L. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105700 · Cited by 110
Valdevit, L., Godfrey, S. W., Schaedler, T. A., Jacobsen, A. J., & Carter, W. B. (2013) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2013.160 · Cited by 110
“Figure 1 illustrates the architecture for hollow nickel microlattices, fabricated with a novel process combining a self-propagating polymer waveguide (SPPW) polymerization technique and electroless nickel deposition.(15,16) These microarchitected cellular materials (which can be polymeric, metallic, ceramic, or hybrid…”
MethodSelf-citationA Facile Methodology for the Production of In Situ Inorganic Nanowire Hydrogels/Aerogels
Jung, S. M., Jung, H. Y., Fang, W., Dresselhaus, M. S., & Kong, J. (2014) · Nano Letters · doi:10.1021/nl404392j · Cited by 109
Additive Manufacturing of Ductile, Ultrastrong Polymer-Derived Nanoceramics
Bauer, J., Crook, C. M., Izard, A. G., Eckel, Z. C., Ruvalcaba, N., Schaedler, T. A., & Valdevit, L. (2019) · Matter · doi:10.1016/j.matt.2019.09.009 · Cited by 119
Self-citationYang, S., Chen, L., Mu, L., Hao, B., & Ma, P. (2015) · RSC Advances · doi:10.1039/c5ra03701h · Cited by 107
Deformation behavior of heterogeneous multi-morphology lattice core hybrid structures
Lei, H., Li, C., Zhang, X., Wang, P., Zhou, H. R., Zhao, Z., & Fang, D. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101674 · Cited by 106
Chen, Y., Qian, F., Zuo, L., Scarpa, F. L., & Wang, L. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.09.012 · Cited by 106
Energy dissipation mechanisms in hollow metallic microlattices
Salari‐Sharif, L., Schaedler, T. A., & Valdevit, L. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.226 · Cited by 105
“Recent progress in additive manufacturing enables fabrication of macroscale hollow microlattices with unprecedented dimensional control on the unit-cell and sub-unit-cell features, thus yielding topologically architected materials with structural hierarchy spanning six orders of magnitude in length scale (from wall th…”
MethodSelf-citationYan, P., Brown, E., Su, Q., Li, J., Wang, J., Xu, C., Zhou, C., & Lin, D. (2017) · Small · doi:10.1002/smll.201701756 · Cited by 104
Determination of the effective elastic properties of titanium lattice structures
Refai, K., Montemurro, M., Brugger, C., & Saintier, N. (2019) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2018.1536816 · Cited by 105
3D printed recoverable honeycomb composites reinforced by continuous carbon fibers
Cheng, Y., Li, J., Qian, X., & Rudykh, S. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113974 · Cited by 107
Krödel, S., Delpero, T., Bergamini, A., Ermanni, P., & Kochmann, D. M. (2013) · Advanced Engineering Materials · doi:10.1002/adem.201300264 · Cited by 105
A level set method for shape and topology optimization of coated structures
Wang, Y., & Kang, Z. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.09.017 · Cited by 104
Metal–Organic Frameworks in Modern Physics: Highlights and Perspectives
Mezenov, Y. A., Krasilin, A. A., Dzyuba, V. P., Nominé, A., & Milichko, V. A. (2019) · Advanced Science · doi:10.1002/advs.201900506 · Cited by 107
Ultralight, strong, and self-reprogrammable mechanical metamaterials
Gregg, C., Catanoso, D., Formoso, O., Kostitsyna, I., Ochalek, M., Olatunde, T., Park, I. W., Sebastianelli, F., Taylor, E. M., Trinh, G., et al. (2024) · Science Robotics · doi:10.1126/scirobotics.adi2746 · Cited by 118
“6E compares the relative compressive modulus of this work with those of several other archi-tected lattices ( 35 , 38 – 41 ) and a carbon-fiber space truss ( 42 ).”
ResultPyramidal Lattice Structures for High Strength and Energy Absorption
Hammetter, C. I., Rinaldi, R. G., & Zok, F. W. (2012) · Journal of Applied Mechanics · doi:10.1115/1.4007865 · Cited by 104
A novel type of tubular structure with auxeticity both in radial direction and wall thickness
Zhang, X. Y., Wang, X. Y., Ren, X. Y., Xie, Y. M., Wu, Y., Zhou, Y. Y., Wang, S. L., & Han, C. Z. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2021.107758 · Cited by 103
Iron and Nickel Cellular Structures by Sintering of 3D‐Printed Oxide or Metallic Particle Inks
Taylor, S. L., Jakus, A. E., Shah, R. N., & Dunand, D. C. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600365 · Cited by 99
Zheng, X., Chen, T., Jiang, X., Naito, M., & Watanabe, I. (2023) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2022.2157682 · Cited by 110
“Typical archi-tected cellular materials include lattice materials with ultrahigh stiffness-to-weight ratios [6–8], negative Poisson’s ratio metamaterials [9–11], architected materials with shape reconfigurability [12,13], and metamaterials with programmable mechanical responses [14–17],…”
BackgroundTopochemical molten salt synthesis for functional perovskite compounds
Li, L., Deng, J. N., Chen, J., & Xing, X. (2015) · Chemical Science · doi:10.1039/c5sc03521j · Cited by 103
Xu, J., Wu, Y., Wang, L., Li, J., Yang, Y., Tian, Y., Gong, Z., Zhang, P., Nutt, S., & Yin, S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.019 · Cited by 102
Dou, L., Cheng, X., Zhang, X., Si, Y., Yu, J., & Ding, B. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta01092h · Cited by 101
Damage-tolerant 3D-printed ceramics via conformal coating
Sajadi, S. M., Vásárhelyi, L., Mousavi, R., Rahmati, A. H., Kónya, Z., Kukovecz, Á., Arif, T., Filleter, T., Vajtai, R., Boul, P. J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abc5028 · Cited by 101
Karthikeyan, V., Surjadi, J. U., Li, X., Fan, R., Theja, V. C. S., Li, W. J., Lü, Y., & Roy, V. A. L. (2023) · Nature Communications · doi:10.1038/s41467-023-37707-2 · Cited by 101
Liu, Y., Lan, K., Li, S., Liu, Y., Kong, B., Wang, G., Zhang, P., Wang, R., He, H., Ling, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11641 · Cited by 101
Three‐Dimensional Carbon Nanotube Sponge‐Array Architectures with High Energy Dissipation
Gui, X., Zeng, Z., Zhu, Y. N., Li, H., Lin, Z., Gan, Q., Xiang, R., Cao, A., & Tang, Z. (2013) · Advanced Materials · doi:10.1002/adma.201304493 · Cited by 100
Interpenetrating lattices with enhanced mechanical functionality
White, B. C., Garland, A., Alberdi, R., & Boyce, B. L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101741 · Cited by 100
The effect of topology on the quasi-static and dynamic behaviour of SLM AlSi10Mg lattice structures
Maconachie, T., Leary, M., Tran, P., Harris, J. A., Liu, Q., Lu, G., Ruan, D., Faruque, O., & Brandt, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08203-y · Cited by 105
Novel metamaterial structures with negative thermal expansion and tunable mechanical properties
Zhang, Q., & Sun, Y. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108692 · Cited by 100
Isotropic design and mechanical characterization of TPMS-based hollow cellular structures
Fu, J., Sun, P., Du, Y., Li, H., Zhou, X., & Tian, Q. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114818 · Cited by 99
Rizvi, A., Chu, R. K. M., & Park, C. B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b11375 · Cited by 102
Li, Z., Li, X., Chua, J. W., Lim, C. H., Yu, X., Wang, Z., & Zhai, W. (2023) · Virtual and Physical Prototyping · doi:10.1080/17452759.2023.2166851 · Cited by 98
“…fi ned as periodic porous structures with elementary features such as strut, shell, plate, or combinations, microlattice metamaterials have small dimensional size but display unprecedented mechanical properties (Schaedler et al. 2011; Salari-Sharif, Valdevit, and Schaedler 2014; Clough et al. 2019).”
BackgroundAbueidda, D., Dalaq, A. S., Al‐Rub, R. K. A., & Jasiuk, I. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.06.082 · Cited by 98
Topology optimization of 3D shell structures with porous infill
Clausen, A., Andreassen, E., & Sigmund, O. (2017) · Acta Mechanica Sinica · doi:10.1007/s10409-017-0679-2 · Cited by 97
“using electroplating, upon which the base structure may or may not be etched away [2].”
MethodZhu, J., Yu, S., Wang, T., Sun, H., Zhao, Z., Mei, L., Zheng, F., Xu, Z. Q., Shakir, I., Huang, Y., et al. (2016) · Nature Communications · doi:10.1038/ncomms13432 · Cited by 96
“The principle of hierarchical design has also been frequently explored for the construction of large manmade structures (for example, Eiffel Tower) and more recently for the creation of ultrastrong, ultralight structural metamaterials 19–22 .”
Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders
Taylor, S. L., Shah, R. N., & Dunand, D. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.002 · Cited by 99
Storage of Mechanical Energy Based on Carbon Nanotubes with High Energy Density and Power Density
Bai, Y., Shen, B., Zhang, S., Zhu, Z., Sun, S., Gao, J. P., Li, B., Wang, Y., Zhang, R., & Wei, F. (2018) · Advanced Materials · doi:10.1002/adma.201800680 · Cited by 99
Li, J., Wang, L., He, X., Liang, J., & Dong, C. (2025) · npj Advanced Manufacturing · doi:10.1038/s44334-025-00057-6 · Cited by 103
Yang, W., Liu, S., Wang, Z., Liu, H., Pan, C., Liu, C., & Shen, C. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109799 · Cited by 95
Ultralight and resilient Al 2 O 3 nanotube aerogels with low thermal conductivity
Xu, C., Wang, H., Song, J., Bai, X., Liu, Z., Fang, M., Yuan, Y., Sheng, J.-Y., Li, X., Wang, N., et al. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15301 · Cited by 96
Long, S., Feng, Y., He, F., He, S., Hong, H., Yang, X., Zheng, L., Liu, J., Gan, L., & Long, M. (2019) · Carbon · doi:10.1016/j.carbon.2019.11.065 · Cited by 95
Wang, Y., Qin, H., Li, Z., Dai, J. J., Cong, H., & Yu, S. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00167-5 · Cited by 96
Continuous lattice fabrication of ultra-lightweight composite structures
Eichenhofer, M., Wong, J., & Ermanni, P. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.013 · Cited by 118
Silane bonded graphene aerogels with tunable functionality and reversible compressibility
Guan, L., Gao, J.-F., Pei, Y.-B., Zhao, L., Gong, L., Wan, Y., Zhou, H., Zheng, N., Du, X.-S., Wu, L., et al. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.022 · Cited by 94
Lee, S., Jafary‐Zadeh, M., Chen, D. Z., Zhang, Y., & Greer, J. R. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01034 · Cited by 93
Self-citationChen, Z., Wang, Z., Zhou, S., Shao, J., & Wu, X. (2018) · Materials · doi:10.3390/ma11071095 · Cited by 93
“Recently, researchers found that three-dimensional (3D) lattices can improve the capacity of energy absorption for structures subjected to vibration and shock [11].”
BackgroundAdvanced Compressible and Elastic 3D Monoliths beyond Hydrogels
Hu, Y., Chen, Z., Zhuo, H., Zhong, L., Peng, X., & Sun, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904472 · Cited by 94
Novel multi-stable mechanical metamaterials for trapping energy through shear deformation
Tan, X., Wang, B., Yao, K., Zhu, S., Chen, S., Xu, P., Wang, L., & Sun, Y. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.105168 · Cited by 94
Bone-inspired microarchitectures achieve enhanced fatigue life
Torres, A. M., Trikanad, A. A., Aubin, C. A., Lambers, F. M., Luna, M., Rimnac, C. M., Zavattieri, P. D., & Hernandez, C. J. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1905814116 · Cited by 92
Mechanical analyses of “Shellular”, an ultralow-density material
Lee, M. G., Lee, J. W., Han, S. C., & Kang, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.040 · Cited by 92
Hasegawa, G., Shimizu, T., Kanamori, K., Maeno, A., Kaji, H., & Nakanishi, K. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04706 · Cited by 92
Solution-Processed Ultraelastic and Strong Air-Bubbled Graphene Foams
Lv, L., Zhang, P., Cheng, H., Zhao, Y., Zhang, Z., Shi, G., & Qu, L. (2016) · Small · doi:10.1002/smll.201600509 · Cited by 94
Large-Scale Spinning of Silver Nanofibers as Flexible and Reliable Conductors
Huang, Y., Bai, X., Zhou, M., Liao, S., Yu, Z., Wang, Y., & Wu, H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02654 · Cited by 94
Xiao, Y., Yan, M., Shi, L. X., Gong, L., Cheng, X., Zhang, H., & Pan, Y. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.102871 · Cited by 91
Construction of mechanical metamaterials and their extraordinary functions
Gu, J., Zhao, W. D., Zeng, C., Liu, L., Leng, J., & Liu, Y. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.118872 · Cited by 94
Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects
Montemayor, L. C., & Greer, J. R. (2015) · Journal of Applied Mechanics · doi:10.1115/1.4030361 · Cited by 91
“The mechanical performance of such architected solids on the macroscale is a function of the deformation mechanism and relative density of the structure, as well as of the constituent material properties, and this has been studied for both materials with cellular solid cores as well as bulk cellular solids [1–16].”
BackgroundSelf-citationGuo, H., Takezawa, A., Honda, M., Kawamura, C., & Kitamura, M. (2020) · Computational Materials Science · doi:10.1016/j.commatsci.2020.109610 · Cited by 91
A multifunctional honeycomb metastructure for vibration suppression
Jin, Y., Shi, Y., Yu, G., Wei, G., Hu, B., & Wu, L. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105964 · Cited by 90
Zhang, Q., Du, Z., Hou, M., Ding, Z., Huang, X., Chen, A., Ma, Y., Lu, S., & Tang, X. (2021) · Carbon · doi:10.1016/j.carbon.2021.11.047 · Cited by 90
Impact behavior of negative stiffness honeycomb materials
Debeau, D. A. R., Seepersad, C. C., & Haberman, M. R. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.7 · Cited by 90
Correlation between topology and elastic properties of imperfect truss-lattice materials
Gross, A. J., Pantidis, P., Bertoldi, K., & Gerasimidis, S. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.11.007 · Cited by 93
Wang, Y., Suo, B., Shi, Y., Yuan, H., Zhu, C., & Chen, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c12413 · Cited by 89
Xiao, L., Shi, G., Feng, G., Shi, L., Liu, S., & Song, W. (2024) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2024.112830 · Cited by 89
Behaviour of luffa sponge material under dynamic loading
Shen, J., Xie, Y. M., Huang, X., Zhou, S., & Ruan, D. (2013) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2013.01.004 · Cited by 92
“At the same time, when the density of the cellular materials decrease to a certain range, other interesting functional properties will emerge such as good damping and reversible properties [30].”
BackgroundUltralight shape-recovering plate mechanical metamaterials
Davami, K., Zhao, L., Lu, E., Cortes, J., Chen, L., Lilley, D. E., Purohit, P. K., & Bargatin, I. (2015) · Nature Communications · doi:10.1038/ncomms10019 · Cited by 89
Three-Dimensional Au Microlattices as Positive Electrodes for Li–O2Batteries
Chen, X., Gallant, B. M., Wunderlich, P., Lohmann, T., & Greer, J. R. (2015) · ACS Nano · doi:10.1021/acsnano.5b00443 · Cited by 89
Self-citationStiff isotropic lattices beyond the Maxwell criterion
Chen, W., Watts, S., Jackson, J. A., Smith, W. L., Tortorelli, D. A., & Spadaccini, C. M. (2019) · Science Advances · doi:10.1126/sciadv.aaw1937 · Cited by 92
“These lattices are known to be compatible with current additive manufacturing processes (4, 6); hence, architectures designed with this topology optimization parameterization can be expected to bemanufacturable.”
BackgroundPreparation and stereolithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics
Fu, Y., Chen, Z., Xu, G., Wei, Y., & Lao, C. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.026 · Cited by 87
Numerical evaluation of additively manufactured lattice architectures for heat sink applications
Dixit, T., Nithiarasu, P., & Kumar, S. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106607 · Cited by 87
Dome-celled aerogels with ultrahigh-temperature superelasticity over 2273 K
Pang, K., Xia, Y., Liu, X., Tong, W., Li, X., Li, C., Zhao, W., Chen, Y., Qin, H., Fang, W., et al. (2025) · Science · doi:10.1126/science.adw5777 · Cited by 87
Bauer, J., Schroer, A., Schwaiger, R., Tesari, I., Lange, C., Valdevit, L., & Kraft, O. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.03.006 · Cited by 94
“1(a)), aiming to combine both out-standingmechanicalpropertiesandlowdensity,havebeen published recently [1–4].”
BackgroundInfluentialSelf-citation3D metallic glass cellular structures
Liu, Z., Chen, W., Carstensen, J. V., Ketkaew, J., Mota, R. M. O., Guest, J. K., & Schroers, J. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.11.057 · Cited by 88
“75 GPa) [37] and alumina nanolattices exhibiting very high elasticity (fully recoverable with strain up to 50%) [38] were fabricated by using a template-assisted electroless plating method [39].”
Method
Metadata
- Authors
- Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B.
- Affiliations
- HRL Laboratories (United States) (US)
- University of California, Irvine (US)
- California Institute of Technology (US)
- Corresponding author
- Schaedler, T. A.
- Venue
- Science
- Published
- 2011-11-18
- Volume
- 334
- Issue
- 6058
- Pages
- 962-965
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2077098498
- Cited by
- 1,784
- References
- 25
- Citations by year
- 2026: 112 · 2025: 144 · 2024: 124 · 2023: 166 · 2022: 144 · 2021: 156 · 2020: 137 · 2019: 157 · 2018: 144 · 2017: 141 · 2016: 104 · 2015: 105 · 2014: 56 · 2013: 50 · 2012: 42
- FWCI
- 84.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- CaltechAUTHORS (California Institute of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Keywords
- ultralight materials, cellular materials, electroless nickel plating, template etching, energy absorption, hierarchy, compression recovery, thermal insulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.