The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
Open accessAbstract
Metal halide perovskite solar cells (PSCs) currently attract enormous research interest because of their high solar-to-electric power conversion efficiency (PCE) and low fabrication costs, but their practical development is hampered by difficulties in achieving high performance with large-size devices. We devised a simple vacuum flash–assisted solution processing method to obtain shiny, smooth, crystalline perovskite films of high electronic quality over large areas. This enabled us to fabricate solar cells with an aperture area exceeding 1 square centimeter, a maximum efficiency of 20.5%, and a certified PCE of 19.6%. By contrast, the best certified PCE to date is 15.6% for PSCs of similar size. We demonstrate that the reproducibility of the method is excellent and that the cells show virtually no hysteresis. Our approach enables the realization of highly efficient large-area PSCs for practical deployment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationKim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citation
Cited by
Items 101–137 of 137
A comprehensive review on the advancements and challenges in perovskite solar cell technology
Noman, M., Khan, Z., & Jan, S. T. (2024) · RSC Advances · doi:10.1039/d3ra07518d · Cited by 301
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Zhou, Q., Liang, L., Hu, J., Cao, B., Yang, L., Wu, T., Li, X., Zhang, B., & Gao, P. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802595 · Cited by 294
Self-citationMetal halide perovskite nanomaterials: synthesis and applications
Ha, S.-T., Su, R., Xing, J., Zhang, Q., & Xiong, Q. (2017) · Chemical Science · doi:10.1039/c6sc04474c · Cited by 293
Perovskite solar cells based on screen-printed thin films
Chen, C., Chen, J., Han, H., Chao, L., Hu, J., Niu, T., Dong, H., Yang, S., Xia, Y., Chen, Y., et al. (2022) · Nature · doi:10.1038/s41586-022-05346-0 · Cited by 290
Qiu, L., Ono, L. K., & Qi, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.09.008 · Cited by 286
Carbon-Based CsPbBr3 Perovskite Solar Cells: All-Ambient Processes and High Thermal Stability
Chang, X., Li, W., Zhu, L., Liu, H., Geng, H., Xiang, S., Liu, J., & Chen, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11393 · Cited by 285
Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells
Zhao, W., Yao, Z., Yu, F., Yang, D., & Liu, S. (. (2018) · Advanced Science · doi:10.1002/advs.201700131 · Cited by 284
Spanopoulos, I., Hadar, I., Ke, W., Tu, Q., Chen, M., Tsai, H., He, Y., Shekhawat, G., Dravid, V. P., Wasielewski, M. R., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b01327 · Cited by 284
A Review on Scaling Up Perovskite Solar Cells
Li, D., Zhang, D., Lim, K., Hu, Y., Rong, Y., Mei, A., Park, N., & Han, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008621 · Cited by 284
Halide Perovskites: A New Era of Solution‐Processed Electronics
Younis, A., Lin, C., Guan, X., Shahrokhi, S., Huang, C., Wang, Y., He, T., Singh, S., Hu, L., Retamal, J. R. D., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005000 · Cited by 282
Atomically Thin-Layered Molybdenum Disulfide (MoS2) for Bulk-Heterojunction Solar Cells
Singh, E., Kim, K. S., Yeom, G. Y., & Nalwa, H. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13582 · Cited by 281
Cai, F., Cai, J., Yang, L., Li, W., Gurney, R. S., Yi, H., Iraqi, A., Liu, D., & Wang, T. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.028 · Cited by 275
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Razza, S., Castro-Hermosa, S., Di Carlo, A., & Brown, T. M. (2016) · APL Materials · doi:10.1063/1.4962478 · Cited by 271
Large-area perovskite solar cells – a review of recent progress and issues
Chen, Y., Zhang, L., Zhang, Y., Gao, H., & Yan, H. (2018) · RSC Advances · doi:10.1039/c8ra00384j · Cited by 269
Zhu, Z., Chueh, C., Li, N., Mao, C., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201703800 · Cited by 267
Najafi, L., Taheri, B., Martín-García, B., Bellani, S., Di Girolamo, D., Agresti, A., Oropesa-Nuñez, R., Pescetelli, S., Vesce, L., Calabrò, E., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05514 · Cited by 264
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics
Ullah, S., Wang, J., Yang, P., Liu, L., Yang, S.-E., Xia, T., Guo, H., & Chen, Y. (2021) · Materials Advances · doi:10.1039/d0ma00866d · Cited by 261
Radical polymeric p-doping and grain modulation for stable, efficient perovskite solar modules
You, S., Zeng, H., Liu, Y., Han, B., Li, M., Li, L., Zheng, X., Guo, R., Luo, L., Li, Z., et al. (2023) · Science · doi:10.1126/science.add8786 · Cited by 260
Self-citationHu, Q., Zhao, L., Wu, J., Gao, K., Luo, D., Jiang, Y., Zhang, Z., Zhu, C., Schaible, E., Hexemer, A., et al. (2017) · Nature Communications · doi:10.1038/ncomms15688 · Cited by 259
Self-citationCation Dynamics in Mixed-Cation (MA)x(FA)1–xPbI3 Hybrid Perovskites from Solid-State NMR
Kubicki, D. J., Prochowicz, D., Hofstetter, A., Péchy, P., Zakeeruddin, S. M., Grätzel, M., & Emsley, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04930 · Cited by 259
Self-citationCharge‐Carrier Balance for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells
Chen, K., Hu, Q., Liu, T., Zhao, L., Luo, D., Wu, J., Zhang, Y., Zhang, W., Liu, F., Russell, T. P., et al. (2016) · Advanced Materials · doi:10.1002/adma.201604048 · Cited by 256
The Functions of Fullerenes in Hybrid Perovskite Solar Cells
Fang, Y., Bi, C., Wang, D., & Huang, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00657 · Cited by 254
Chen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
Semitransparent Perovskite Solar Cells: From Materials and Devices to Applications
Shi, B., Duan, L., Zhao, Y., Luo, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201806474 · Cited by 253
Self-citationTuning of CO2 Reduction Selectivity on Metal Electrocatalysts
Wang, Y., Liu, J., Wang, Y., Al‐Enizi, A. M., & Zheng, G. (2017) · Small · doi:10.1002/smll.201701809 · Cited by 241
A general printing approach for scalable growth of perovskite single-crystal films
Gu, Z., Huang, Z., Li, C., Li, M., & Song, Y. (2018) · Science Advances · doi:10.1126/sciadv.aat2390 · Cited by 214
Wu, W., Han, X., Li, J., Wang, X., Zhang, Y., Huo, Z., Chen, Q., Sun, X., Xu, Z., Tan, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006006 · Cited by 166
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Self-citationAdvances in Blue Energy Fuels: Harvesting Energy from Ocean for Self‐Powered Electrolysis
Ock, I. W., Yin, J., Wang, S., Zhao, X., Baik, J. M., & Chen, J. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202400563 · Cited by 73
Zhang, K., & Yang, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703331 · Cited by 57
Preparation and Testing of Anisotropic MAPbI3 Perovskite Photoelectric Sensors
Zhao, Z., Li, Y., Du, Y., Zhang, L., Wei, J., & Lin, F. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10062 · Cited by 46
Metadata
- Authors
- Li, X., Bi, D., Yi, C., Décoppet, J.-D., Luo, J., Zakeeruddin, S. M., Hagfeldt, A., & Grätzel, M.
- Venue
- Science
- Published
- 2016-07
- Volume
- 353
- Issue
- 6294
- Pages
- 58-62
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2410619939
- Cited by
- 1,915
- References
- 30
- FWCI
- 163.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.