The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Open accessAbstract
Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field continues to seek ever-higher durability, additional tools that avoid progressive ligand intercalation are needed to minimize degradation at high temperatures. We used ammonium ligands that are nonreactive with the bulk of perovskites and investigated a library that varies ligand molecular structure systematically. We found that fluorinated aniliniums offer interfacial passivation and simultaneously minimize reactivity with perovskites. Using this approach, we report a certified quasi–steady-state power-conversion efficiency of 24.09% for inverted-structure PSCs. In an encapsulated device operating at 85°C and 50% relative humidity, we document a 1560-hour T 85 at maximum power point under 1-sun illumination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Multiwfn: A multifunctional wavefunction analyzer
Lu, T., & Chen, F. (2012) · Journal of Computational Chemistry · doi:10.1002/jcc.22885 · Cited by 45,371
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Self-citationEfficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
Higher-accuracy van der Waals density functional
Lee, K., Murray, É. D., Kong, L., Lundqvist, B. I., & Langreth, D. C. (2010) · Physical Review B · doi:10.1103/physrevb.82.081101 · Cited by 2,755
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citationEnhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationPlanar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Self-citationConformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Self-citationZheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Self-citationSurface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
All-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Self-citationStabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J. (2022) · Science · doi:10.1126/science.abl5676 · Cited by 907
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
Tress, W., Yavari, M., Domanski, K., Yadav, P., Niesen, B., Correa Baena, J. P., Hagfeldt, A., & Graetzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02415k · Cited by 843
Liu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
Self-citationAn interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Song, Z., McElvany, C. L., Phillips, A. B., Celik, I., Krantz, P. W., Watthage, S. C., Liyanage, G. K., Apul, D., & Heben, M. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00757d · Cited by 613
Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells
Chen, H., Teale, S., Chen, B., Hou, Y., Grater, L., Zhu, T., Bertens, K., Park, S. M., Atapattu, H. R., Gao, Y., et al. (2022) · Nature Photonics · doi:10.1038/s41566-022-00985-1 · Cited by 588
Self-citationDeterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells
Sidhik, S., Wang, Y., De Siena, M., Asadpour, R., Torma, A. J., Terlier, T., Ho, K., Li, W., Puthirath, A. B., Shuai, X., et al. (2022) · Science · doi:10.1126/science.abq7652 · Cited by 563
Self-citationTerawatt-scale photovoltaics: Transform global energy
Haegel, N. M., Atwater, H., Barnes, T., Breyer, C., Burrell, A., Chiang, Y.-M., De Wolf, S., Dimmler, B., Feldman, D., Glunz, S., et al. (2019) · Science · doi:10.1126/science.aaw1845 · Cited by 560
Top and bottom surfaces limit carrier lifetime in lead iodide perovskite films
Yang, Y., Yang, M., Moore, D. T., Yan, Y., Miller, E. M., Zhu, K., & Beard, M. C. (2017) · Nature Energy · doi:10.1038/nenergy.2016.207 · Cited by 519
Self-citationEndres, J., Egger, D. A., Kulbak, M., Kerner, R. A., Zhao, L., Silver, S. H., Hodes, G., Rand, B. P., Cahen, D., Kronik, L., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00946 · Cited by 451
Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency
Zhu, H., Liu, Y., Eickemeyer, F. T., Pan, L., Ren, D., Ruiz‐Preciado, M. A., Carlsen, B., Yang, B., Dong, X., Wang, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907757 · Cited by 412
Self-citationOn the Origin of the Ideality Factor in Perovskite Solar Cells
Caprioglio, P., Wolff, C. M., Sandberg, O. J., Armin, A., Rech, B., Albrecht, S., Neher, D., & Stolterfoht, M. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000502 · Cited by 377
Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells
Zhao, X., Liu, T., Burlingame, Q. C., Liu, T., Holley, R., Cheng, G., Yao, N., Gao, F., & Loo, Y.-L. (2022) · Science · doi:10.1126/science.abn5679 · Cited by 351
Bi, D., Li, X., Milić, J. V., Kubicki, D. J., Pellet, N., Luo, J., LaGrange, T., Mettraux, P., Emsley, L., Zakeeruddin, S. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06709-w · Cited by 339
Self-citationCao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
Self-citationIodine reduction for reproducible and high-performance perovskite solar cells and modules
Chen, S., Xiao, X., Gu, H., & Huang, J. (2021) · Science Advances · doi:10.1126/sciadv.abe8130 · Cited by 312
Understanding Performance Limiting Interfacial Recombination in pin Perovskite Solar Cells
Warby, J., Zu, F., Zeiske, S., Gutierrez‐Partida, E., Frohloff, L., Kahmann, S., Frohna, K., Mosconi, E., Radicchi, E., Lang, F., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103567 · Cited by 297
Benck, J. D., Pinaud, B. A., Gorlin, Y., & Jaramillo, T. F. (2014) · PLoS ONE · doi:10.1371/journal.pone.0107942 · Cited by 289
Angle-resolved photoemission spectroscopy and its application to topological materials
Lv, B., Qian, T., & Ding, H. (2019) · Nature Reviews Physics · doi:10.1038/s42254-019-0088-5 · Cited by 284
Liu, Y., Akin, S., Hinderhofer, A., Eickemeyer, F. T., Zhu, H., Seo, J., Zhang, J., Schreiber, F., Zhang, H., Zakeeruddin, S. M., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202005211 · Cited by 260
Self-citationZhao, Y., Heumueller, T., Zhang, J., Luo, J., Kasian, O., Langner, S., Kupfer, C., Liu, B., Zhong, Y., Elia, J., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00953-z · Cited by 229
Self-citationStolterfoht, M., Grischek, M., Caprioglio, P., Wolff, C. M., Gutierrez‐Partida, E., Peña‐Camargo, F., Rothhardt, D., Zhang, S., Raoufi, M., Wolansky, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000080 · Cited by 209
Bayesian Optimization for Calibrating and Selecting Hybrid-Density Functional Models
Vargas−Hernández, R. A. (2020) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.0c01375 · Cited by 208
Multication perovskite 2D/3D interfaces form via progressive dimensional reduction
Proppe, A. H., Johnston, A., Teale, S., Mahata, A., Quintero-Bermudez, R., Jung, E. H., Grater, L., Cui, T., Filleter, T., Kim, C.-Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-23616-9 · Cited by 204
Self-citationLiu, C., Yang, Y., Rakstys, K., Mahata, A., Franckevicius, M., Mosconi, E., Skackauskaite, R., Ding, B., Brooks, K. G., Usiobo, O. J., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26754-2 · Cited by 204
Self-citationZhu, H., Ren, Y., Pan, L., Ouellette, O., Eickemeyer, F. T., Wu, Y., Li, X., Wang, S., Liu, H., Dong, X., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12802 · Cited by 198
Self-citationKim, H., Kim, J. S., Heo, J.-M., Pei, M., Park, I.-H., Liu, Z., Yun, H. J., Park, M.-H., Jeong, S.-H., Kim, Y.-H., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17072-0 · Cited by 177
Tavakoli, M. M., Tress, W., Milić, J. V., Kubicki, D., Emsley, L., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02404a · Cited by 161
Self-citationSutanto, A. A., Szostak, R., Drigo, N., Queloz, V. I. E., Marchezi, P. E., Germino, J. C., Tolentino, H. C. N., Nazeeruddin, M. K., Nogueira, A. F., & Grancini, G. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c01271 · Cited by 161
Acid Dissociation Constant: A Criterion for Selecting Passivation Agents in Perovskite Solar Cells
Lee, S.-H., Jeong, S., Seo, S., Shin, H., Ma, C., & Park, N. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00452 · Cited by 156
Perini, C. A. R., Rojas‐Gatjens, E., Ravello, M., Castro‐Mendez, A., Hidalgo, J., An, Y., Kim, S., Lai, B. C. H., Li, R., Silva, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202204726 · Cited by 145
Lyu, R., Moore, C. E., Liu, T., Yu, Y., & Wu, Y. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c05441 · Cited by 114
Origin of High Efficiency and Long-Term Stability in Ionic Liquid Perovskite Photovoltaic
Chao, L., Niu, T., Gu, H., Yang, Y., Wei, Q., Xia, Y., Hui, W., Zuo, S., Zhu, Z., Pei, C., et al. (2020) · Research · doi:10.34133/2020/2616345 · Cited by 93
Self-citationHow Stable Is the 2D/3D Interface of Metal Halide Perovskite under Light and Heat?
Chakkamalayath, J., Hiott, N., & Kamat, P. V. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02408 · Cited by 89
Cited by
Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands
Chen, H., Liu, C., Xu, J., Maxwell, A., Zhou, W., Yang, Y., Zhou, Q., Bati, A. S. R., Wan, H., Wang, Z., et al. (2024) · Science · doi:10.1126/science.adm9474 · Cited by 1,389
Self-citationStabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Self-citationHighly efficient and stable perovskite solar cells via a multifunctional hole transporting material
Zhou, J., Tan, L., Liu, Y., Li, H., Liu, X., Li, M., Wang, S., Zhang, Y., Jiang, C., Hua, R., et al. (2024) · Joule · doi:10.1016/j.joule.2024.02.019 · Cited by 735
Solar cell efficiency tables (Version 63)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., & Hao, X. (2024) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3750 · Cited by 588
Metadata
- Authors
- Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., Chen, B., Chen, H., Wang, T., Zeng, L., Maxwell, A., Wang, Z., Rao, K. R., Cai, Z., Zakeeruddin, S. M., Pham, J. T., Risko, C. M., Amassian, A., Kanatzidis, M. G., Graham, K. R., Grätzel, M., & Sargent, E. H.
- Venue
- Science
- Published
- 2023-07-14
- Volume
- 381
- Issue
- 6654
- Pages
- 209-215
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4384155265
- Cited by
- 492
- References
- 52
- FWCI
- 36.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.