Effect of Wordline/Bitline Scaling on the Performance, Energy Consumption, and Reliability of Cross-Point Memory Array
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The impact of wordline/bitline metal wire scaling on the write/read performance, energy consumption, speed, and reliability of the cross-point memory array is quantitatively studied for technology nodes down to single-digit nm. The impending resistivity increase in the Cu wires is found to cause significant decrease of both write and read window margins at the regime when electron surface scattering and grain boundary scattering are substantial. At deeply-scaled device dimensions, the wire energy dissipation and wire latency become comparable to or even exceed the intrinsic values of memory cells. The large current density flowing through the wordlines/bitlines raises additional reliability concerns for the cross-point memory array. All these issues are exacerbated at smaller memory resistance values and larger memory array sizes. They thereby impose strict constraints on the memory device design and preclude the realization of large-scale cross-point memory array with minimum feature sizes beyond the 10 nm node. A rethink in the design methodology of cross-point memory to incorporate and mitigate the scaling effects of wordline/bitline is necessary. Possible solutions include the use of memory wires with better conductivity and scalability, memory arrays with smaller partition sizes, and memory elements with larger resistance values and resistance ratios.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A widely accepted104,271, alternative design to minimize this problem consists in dividing the large crossbars into smaller ones (Supplementary Fig. 9b), whose reduced size improves their read margin (that is the portion of the applied voltage in the inputs that is actually delivered to the memristors).”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [271]
Citations
Cites
The conductivity of thin metallic films according to the electron theory of metals
Fuchs, K. (1938) · Mathematical Proceedings of the Cambridge Philosophical Society · doi:10.1017/s0305004100019952 · Cited by 2,276 · cited 1×
“These two effects are well-known and can be quanti.ed using Fuchs-Sondheimer (FS) model for surface specularity [Fuchs 1938] and Mayadas-Shatzkes (MS) model for grain boundary re.ectivity [Mayadas and Shatzkes 1970]: .”
Mayadas, A. F., & Shatzkes, M. (1970) · Physical Review B · doi:10.1103/physrevb.1.1382 · Cited by 2,210
Wong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806 · cited 8×
“The severe deterioration of wire latency obliterates the high speed advantage of various emerging memories such as RRAM (300ps) [Lee et al. 2010], STTRAM (<2ns) [Zeng et al. 2011], CBRAM (5ns) [Aratani et al. 2007], and PCM (10ns) [Liang et al. 2012], and is becoming one of the most critical issue facing the future in…”
BackgroundInfluentialSelf-citationReliability and current carrying capacity of carbon nanotubes
Wei, B. Q., Vajtai, R., & Ajayan, P. M. (2001) · Applied Physics Letters · doi:10.1063/1.1396632 · Cited by 1,279 · cited 1×
“As we can see from Figure 12, graphene and CNTs exhibit much higher current carrying capability and can substantially relax the programming current limit of the memory cell [Lee et al. 2011; Murali et al. 2009; Wei et al. 2001].”
BackgroundEnergy dissipation in general purpose microprocessors
Gonzalez, R., & Horowitz, M. (1996) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.535411 · Cited by 644
Comprehensive study of the resistivity of copper wires with lateral dimensions of 100 nm and smaller
Steinhögl, W., Schindler, G., Steinlesberger, G., Traving, M., & Engelhardt, M. (2005) · Journal of Applied Physics · doi:10.1063/1.1834982 · Cited by 531 · cited 3×
“…to the mean free path of electrons in Cu, surface scattering and grain boundary scattering, the two main scattering effects for electrons in Cu, become substantial and result in the size-dependent resistivity of Cu wires [Josell et al. 2009; Rossnagel and Kuan 2004; Steinhogl et al. 2005].”
BackgroundMethodInfluentialSimple formulas for two- and three-dimensional capacitances
Sakurai, T., & Tamaru, K. (1983) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1983.21093 · Cited by 463
Alteration of Cu conductivity in the size effect regime
Rossnagel, S. M., & Kuan, T. S. (2004) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.1642639 · Cited by 457
Breakdown current density of graphene nanoribbons
Murali, R., Yang, Y., Brenner, K., Beck, T., & Meindl, J. D. (2009) · Applied Physics Letters · doi:10.1063/1.3147183 · Cited by 385 · cited 1×
“As we can see from Figure 12, graphene and CNTs exhibit much higher current carrying capability and can substantially relax the programming current limit of the memory cell [Lee et al. 2011; Murali et al. 2009; Wei et al. 2001].”
BackgroundNaeemi, A., Sarvari, R., & Meindl, J. D. (2005) · IEEE Electron Device Letters · doi:10.1109/led.2004.841440 · Cited by 319
Research works printed but not linked: 3
- ITRS emerging memroy chapter. 2011. ITRS emerging memroy chapter. 2011.
- Lee , H. Y. , Chen , Y. S. , 2010 . Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance . In Proceedings of the International Electron Devices Meeting (IEDM). IEEE. 19 .7.1--19.7.4. Lee, H. Y., Chen, Y. S., et al. 2010. Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance. In Proceedings of the International Electron Devices Meeting (IEDM). IEEE. 19.7.1--19.7.4.
- Wu , Y. , Chai , Y. , Chen , H.-Y. , Yu , S. , and Wong , H . -S. P. 2011. Resistive switching AlOx-based memory with CNT electrode for ultra-low switching current and high density memory application . In Proceedings of the Symposium on VLSI Technology. 26--27 . Wu, Y., Chai, Y., Chen, H.-Y., Yu, S., and Wong, H.-S. P. 2011. Resistive switching AlOx-based memory with CNT electrode for ultra-low switching current and high density memory application. In Proceedings of the Symposium on VLSI Technology. 26--27.
Cited by
Hardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“A widely accepted 104,271 , alternative design to minimize this problem consists in dividing the large crossbars into smaller ones (Supplementary Fig.”
Access devices for 3D crosspoint memory
Burr, G. W., Shenoy, R. S., Virwani, K., Narayanan, P., Padilla, A., Kurdi, B., & Hwang, H. (2014) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4889999 · Cited by 371
Logic Design Within Memristive Memories Using Memristor-Aided loGIC (MAGIC)
Talati, N., Gupta, S., Mane, P., & Kvatinsky, S. (2016) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2016.2570248 · Cited by 339
“Thus, it is essential to consider the role of the resistance of the wires while executing logic functions within memristive MPUs, similar to the consideration of the wires in memory arrays [53].”
Challenges hindering memristive neuromorphic hardware from going mainstream
Adam, G. C., Khiat, A., & Prodromakis, T. (2018) · Nature Communications · doi:10.1038/s41467-018-07565-4 · Cited by 136
Phase-Change Memory for In-Memory Computing
Syed, G. S., Gallo, M. L., & Sebastian, A. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00670 · Cited by 97
Metadata
- Authors
- Liang, J., Yeh, S., Wong, S. S., & Wong, H.-S. P.
- Affiliations
- Stanford University (US)
- Venue
- ACM Journal on Emerging Technologies in Computing Systems
- Published
- 2013-02
- Volume
- 9
- Issue
- 1
- Pages
- 1-14
- ISSN
- 1550-4832 (ISSN-L)
- 1550-4840
- OpenAlex
- W2060598156
- Cited by
- 71
- References
- 40
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 4 · 2023: 6 · 2022: 3 · 2021: 9 · 2020: 8 · 2019: 6 · 2018: 6 · 2017: 5 · 2016: 8 · 2015: 4 · 2014: 8 · 2013: 1
- FWCI
- 4.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACM Journal on Emerging Technologies in Computing Systems (publishedVersion)
- Funders
- E3S Center
- Stanford University
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Semiconductor Devices and Circuit Design
- Keywords
- cross-point memory arrays, grain boundary scattering, electron-surface scattering, memory reliability, current density, 10 nm node
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Wordline/Bitline Scaling on the Performance, Energy Consumption, and Reliability of Cross-Point Memory Array. https://app.cochat.ai/papers/10.1145/2422094.2422103
- The paper
- Liang, J., Yeh, S., Wong, S. S., & Wong, H.-S. P. (2013). Effect of Wordline/Bitline Scaling on the Performance, Energy Consumption, and Reliability of Cross-Point Memory Array. ACM Journal on Emerging Technologies in Computing Systems. https://doi.org/10.1145/2422094.2422103
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.