Effect of Wordline/Bitline Scaling on the Performance, Energy Consumption, and Reliability of Cross-Point Memory Array
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The impact of wordline/bitline metal wire scaling on the write/read performance, energy consumption, speed, and reliability of the cross-point memory array is quantitatively studied for technology nodes down to single-digit nm. The impending resistivity increase in the Cu wires is found to cause significant decrease of both write and read window margins at the regime when electron surface scattering and grain boundary scattering are substantial. At deeply-scaled device dimensions, the wire energy dissipation and wire latency become comparable to or even exceed the intrinsic values of memory cells. The large current density flowing through the wordlines/bitlines raises additional reliability concerns for the cross-point memory array. All these issues are exacerbated at smaller memory resistance values and larger memory array sizes. They thereby impose strict constraints on the memory device design and preclude the realization of large-scale cross-point memory array with minimum feature sizes beyond the 10 nm node. A rethink in the design methodology of cross-point memory to incorporate and mitigate the scaling effects of wordline/bitline is necessary. Possible solutions include the use of memory wires with better conductivity and scalability, memory arrays with smaller partition sizes, and memory elements with larger resistance values and resistance ratios.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A widely accepted104,271, alternative design to minimize this problem consists in dividing the large crossbars into smaller ones (Supplementary Fig. 9b), whose reduced size improves their read margin (that is the portion of the applied voltage in the inputs that is actually delivered to the memristors).”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [271]
Citations
Cites
The conductivity of thin metallic films according to the electron theory of metals
Fuchs, K. (1938) · Mathematical Proceedings of the Cambridge Philosophical Society · doi:10.1017/s0305004100019952 · Cited by 2,276 · cited 1×
“These two effects are well-known and can be quanti.ed using Fuchs-Sondheimer (FS) model for surface specularity [Fuchs 1938] and Mayadas-Shatzkes (MS) model for grain boundary re.ectivity [Mayadas and Shatzkes 1970]: .”
Mayadas, A. F., & Shatzkes, M. (1970) · Physical Review B · doi:10.1103/physrevb.1.1382 · Cited by 2,210
Wong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806 · cited 8×
“The severe deterioration of wire latency obliterates the high speed advantage of various emerging memories such as RRAM (300ps) [Lee et al. 2010], STTRAM (<2ns) [Zeng et al. 2011], CBRAM (5ns) [Aratani et al. 2007], and PCM (10ns) [Liang et al. 2012], and is becoming one of the most critical issue facing the future in…”
BackgroundInfluentialSelf-citationReliability and current carrying capacity of carbon nanotubes
Wei, B. Q., Vajtai, R., & Ajayan, P. M. (2001) · Applied Physics Letters · doi:10.1063/1.1396632 · Cited by 1,279 · cited 1×
“As we can see from Figure 12, graphene and CNTs exhibit much higher current carrying capability and can substantially relax the programming current limit of the memory cell [Lee et al. 2011; Murali et al. 2009; Wei et al. 2001].”
BackgroundEnergy dissipation in general purpose microprocessors
Gonzalez, R., & Horowitz, M. (1996) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.535411 · Cited by 644
Comprehensive study of the resistivity of copper wires with lateral dimensions of 100 nm and smaller
Steinhögl, W., Schindler, G., Steinlesberger, G., Traving, M., & Engelhardt, M. (2005) · Journal of Applied Physics · doi:10.1063/1.1834982 · Cited by 531 · cited 3×
“…to the mean free path of electrons in Cu, surface scattering and grain boundary scattering, the two main scattering effects for electrons in Cu, become substantial and result in the size-dependent resistivity of Cu wires [Josell et al. 2009; Rossnagel and Kuan 2004; Steinhogl et al. 2005].”
BackgroundMethodInfluentialSimple formulas for two- and three-dimensional capacitances
Sakurai, T., & Tamaru, K. (1983) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1983.21093 · Cited by 463
Alteration of Cu conductivity in the size effect regime
Rossnagel, S. M., & Kuan, T. S. (2004) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.1642639 · Cited by 457
Breakdown current density of graphene nanoribbons
Murali, R., Yang, Y., Brenner, K., Beck, T., & Meindl, J. D. (2009) · Applied Physics Letters · doi:10.1063/1.3147183 · Cited by 385 · cited 1×
“As we can see from Figure 12, graphene and CNTs exhibit much higher current carrying capability and can substantially relax the programming current limit of the memory cell [Lee et al. 2011; Murali et al. 2009; Wei et al. 2001].”
BackgroundNaeemi, A., Sarvari, R., & Meindl, J. D. (2005) · IEEE Electron Device Letters · doi:10.1109/led.2004.841440 · Cited by 319
Size-Dependent Resistivity in Nanoscale Interconnects
Josell, D., Brongersma, S. H., & Tőkei, Z. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145415 · Cited by 286
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Self-citationLee, H. Y., Chen, Y. S., Chen, P. S., Gu, P. Y., Hsu, Y. Y., Wang, S. M., Liu, W. H., Tsai, C. H., Sheu, S. S., Chiang, P. C., et al. (2010) · 2010 International Electron Devices Meeting · doi:10.1109/iedm.2010.5703395 · Cited by 264 · cited 1×
“The severe deterioration of wire latency obliterates the high speed advantage of various emerging memories such as RRAM (300ps) [Lee et al. 2010], STTRAM (<2ns) [Zeng et al. 2011], CBRAM (5ns) [Aratani et al. 2007], and PCM (10ns) [Liang et al. 2012], and is becoming one of the most critical…”
BackgroundTechnology and reliability constrained future copper interconnects. I. Resistance modeling
Kapur, P., McVittie, J. P., & Saraswat, K. C. (2002) · IEEE Transactions on Electron Devices · doi:10.1109/16.992867 · Cited by 251
Non-volatile memory technologies: emerging concepts and new materials
Bez, R., & Pirovano, A. (2004) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2004.09.127 · Cited by 250 · cited 2×
“…bistable memory elements are sandwiched between a periodic array of crossed wordlines and bitlines, is widely regarded as the targeted architecture for the next generation nonvolatile memory (NVM) due to its inherent 4F2 device density and simplicity in fabrication [Bez and Pirovano 2004].”
BackgroundWu, W., Brongersma, S. H., Van Hove, M., & Maex, K. (2004) · Applied Physics Letters · doi:10.1063/1.1703844 · Cited by 230
Full Integration of Highly Manufacturable 512Mb PRAM based on 90nm Technology
Oh, J. H., Park, J. H., Lim, Y. S., Lim, H. S., Oh, Y. T., Kim, J. S., Shin, J. M., Park, J. H., Song, Y. J., Ryoo, K. C., et al. (2006) · 2006 International Electron Devices Meeting · doi:10.1109/iedm.2006.346905 · Cited by 141
A Novel Resistance Memory with High Scalability and Nanosecond Switching
Aratani, K., Ohba, K., Mizuguchi, T., Yasuda, S., Shiimoto, T., Tsushima, T., Sone, T., Endo, K., Kouchiyama, A., Sasaki, S., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419064 · Cited by 135
Interconnect opportunities for gigascale integration
MEINDL, J. D. (2003) · IEEE Micro · doi:10.1109/mm.2003.1209464 · Cited by 123
Design and analysis of crossbar circuits for molecular nanoelectronics
Ziegler, M. M., & Stan, M. R. (2003) · Proceedings of the 2nd IEEE Conference on Nanotechnology · doi:10.1109/nano.2002.1032256 · Cited by 100
Zhang, W., Brongersma, S. H., Li, Z., Li, D., Richard, O., & Maex, K. (2007) · Journal of Applied Physics · doi:10.1063/1.2711385 · Cited by 93
Koo, K.-H., Cho, H., Kapur, P., & Saraswat, K. C. (2007) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2007.909045 · Cited by 91
An Ultra-Low Reset Current Cross-Point Phase Change Memory With Carbon Nanotube Electrodes
Liang, J., Jeyasingh, R. G. D., Chen, H.-Y., & Wong, H.-S. P. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2184542 · Cited by 88 · cited 4×
“The impending resistivity increase in the Cu wires is found to cause signi.cant decrease of both write and read window margins at the regime when electron surface scattering and grain boundary scattering are substantial.”
BackgroundInfluentialSelf-citationBreakdown Current Density of CVD-Grown Multilayer Graphene Interconnects
Lee, K.-J., Chandrakasan, A. P., & Kong, J. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2108259 · Cited by 87 · cited 1×
“As we can see from Figure 12, graphene and CNTs exhibit much higher current carrying capability and can substantially relax the programming current limit of the memory cell [Lee et al. 2011; Murali et al. 2009; Wei et al. 2001].”
BackgroundHigh performance ultra-low energy RRAM with good retention and endurance
Cheng, C. H., Tsai, C. Y., Chin, A., & Yeh, F. S. (2010) · 2010 International Electron Devices Meeting · doi:10.1109/iedm.2010.5703392 · Cited by 84 · cited 2×
“As the energy dissipation of a single memory cell is being scaled down to sub-pJ range [Cheng et al. 2010; Zeng et al. 2011], it is of great importance to examine the energy consumption of wordlines/bitlines and compare it with those of the memory cells to obtain a comprehensive picture of the…”
BackgroundNovel Ultra-low power RRAM with good endurance and retention
Cheng, C., Chin, A., & Yeh, F. S. (2010) · Symposium on VLSI Technology · doi:10.1109/vlsit.2010.5556180 · Cited by 82
Ho, C., Hsu, C.-L., Chen, C., Liu, J.-T., Wu, C.-S., Huang, C.-C., Hu, C. C., & Yang, F.-L. (2010) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2010.5703389 · Cited by 82 · cited 1×
“While such low current has been demonstrated in deeply scaled single RRAM cells [Cheng et al. 2010; Ho et al. 2010; Kim et al. 2011; Wu et al. 2011], further decrease is necessary for larger-scale memory arrays due to the increase of the leakage current.”
BackgroundZeng, Z. M., Khalili Amiri, P., Rowlands, G., Zhao, H., Krivorotov, I. N., Wang, J.-P., Katine, J. A., Langer, J., Galatsis, K., Wang, K. L., et al. (2011) · Applied Physics Letters · doi:10.1063/1.3556615 · Cited by 64
A Novel Reference Scheme for Reading Passive Resistive Crossbar Memories
Mustafa, J., & Waser, R. (2006) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2006.885016 · Cited by 60 · cited 2×
“For a cross-point memory array with wordline/bitline driven from one end, this is the cell located in the farthest corner of the array (rsrc in Figure 3) [Mustafa and Waser 2006].”
BackgroundCompact Performance Models and Comparisons for Gigascale On-Chip Global Interconnect Technologies
Koo, K.-H., Kapur, P., & Saraswat, K. C. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2026196 · Cited by 41 · cited 2×
“While such size effect of Cu wire has been extensively studied for digital logic interconnect applications [Kitada et al. 2007; Koo et al. 2009; Naeemi et al. 2005; Rossnagel et al. 2005; Sarvari et al. 2005], its implications on the write and read performance of a cross-point memory array have…”
BackgroundForming-free nitrogen-doped AlOX RRAM with sub-μA programming current
Kim, D. Y., Park, Zhang, Yang-Liauw, Sekar, & Wong, S. S. (2011) · Symposium on VLSI Technology · Cited by 37
Self-citationLiang, J., Yeh, S., Wong, S. S., & Wong, H. ‐. P. (2012) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw.2012.6213650 · Cited by 32 · cited 3×
“PCM cells driven by 1D metallic CNTs have been recently demonstrated in [Liang et al. 2012] and they showed promising electrical performance with singledigit-nm electrodes.”
BackgroundSelf-citationKitada, H., Suzuki, T., Kimura, T., Kudo, H., Ochimizu, H., Okano, S., Tsukune, A., Suda, S., Sakai, S., Ohtsuka, N., et al. (2007) · IEEE International Interconnect Technology Conference (IITC) · doi:10.1109/iitc.2007.382333 · Cited by 29 · cited 1×
“…bistable memory elements are sandwiched between a periodic array of crossed wordlines and bitlines, is widely regarded as the targeted architecture for the next generation nonvolatile memory (NVM) due to its inherent 4F2 device density and simplicity in fabrication [Bez and Pirovano 2004].”
BackgroundSarvari, R., Naeemi, A., Venkatesan, R., & MEINDL, J. D. (2005) · IEEE International Interconnect Technology Conference (IITC) · doi:10.1109/iitc.2005.1499978 · Cited by 20 · cited 2×
“…of Cu wire has been extensively studied for digital logic interconnect applications [Kitada et al. 2007; Koo et al. 2009; Naeemi et al. 2005; Rossnagel et al. 2005; Sarvari et al. 2005], its implications on the write and read performance of a cross-point memory array have not been examined.”
BackgroundRossnagel, S. M., Wisnieff, R. L., Edelstein, D. C., & Kuan, T. S. (2006) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2005.1609274 · Cited by 18
A novel tite buffered Cu-GeSbTe/SiO2 electrochemical resistive memory (ReRAM)
Lin, Y., Lee, F.-M., Chen, Y., Chien, W.-C., Yeh, C. W., Hsieh, K. Y., & Lu, C.-Y. (2010) · Symposium on VLSI Technology · doi:10.1109/vlsit.2010.5556183 · Cited by 15 · cited 4×
“2010], the 0.3pJ spin-transfer torque RAM (STTRAM) [Zeng et al. 2011] and the 1pJ conductive bridge RAM (CBRAM) [Lin et al. 2010].”
InfluentialDesign and analysis of future memories based on switchable resistive elements
Mustafa, J., & Waser, R. M. (2006) · RWTH Publications (RWTH Aachen) · Cited by 14
Liang, J., & Wong, H. ‐. P. (2010) · IEEE International Interconnect Technology Conference (IITC) · doi:10.1109/iitc.2010.5510304 · Cited by 14 · cited 5×
“Although this four-group division is a great simpli.cation, it is able to outline the two worst case write and read margins [Liang and Wong 2010].”
BackgroundMethodInfluentialSelf-citationProceedings of the 2nd IEEE Conference on Nanotechnology
(2002) · doi:10.1109/nano.2002 · Cited by 9
Research works printed but not linked: 3
- ITRS emerging memroy chapter. 2011. ITRS emerging memroy chapter. 2011.
- Lee , H. Y. , Chen , Y. S. , 2010 . Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance . In Proceedings of the International Electron Devices Meeting (IEDM). IEEE. 19 .7.1--19.7.4. Lee, H. Y., Chen, Y. S., et al. 2010. Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance. In Proceedings of the International Electron Devices Meeting (IEDM). IEEE. 19.7.1--19.7.4.
- Wu , Y. , Chai , Y. , Chen , H.-Y. , Yu , S. , and Wong , H . -S. P. 2011. Resistive switching AlOx-based memory with CNT electrode for ultra-low switching current and high density memory application . In Proceedings of the Symposium on VLSI Technology. 26--27 . Wu, Y., Chai, Y., Chen, H.-Y., Yu, S., and Wong, H.-S. P. 2011. Resistive switching AlOx-based memory with CNT electrode for ultra-low switching current and high density memory application. In Proceedings of the Symposium on VLSI Technology. 26--27.
Cited by
Hardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“A widely accepted 104,271 , alternative design to minimize this problem consists in dividing the large crossbars into smaller ones (Supplementary Fig.”
Access devices for 3D crosspoint memory
Burr, G. W., Shenoy, R. S., Virwani, K., Narayanan, P., Padilla, A., Kurdi, B., & Hwang, H. (2014) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.4889999 · Cited by 371
Logic Design Within Memristive Memories Using Memristor-Aided loGIC (MAGIC)
Talati, N., Gupta, S., Mane, P., & Kvatinsky, S. (2016) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2016.2570248 · Cited by 339
“Thus, it is essential to consider the role of the resistance of the wires while executing logic functions within memristive MPUs, similar to the consideration of the wires in memory arrays [53].”
Challenges hindering memristive neuromorphic hardware from going mainstream
Adam, G. C., Khiat, A., & Prodromakis, T. (2018) · Nature Communications · doi:10.1038/s41467-018-07565-4 · Cited by 136
Phase-Change Memory for In-Memory Computing
Syed, G. S., Gallo, M. L., & Sebastian, A. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00670 · Cited by 97
Metadata
- Authors
- Liang, J., Yeh, S., Wong, S. S., & Wong, H.-S. P.
- Affiliations
- Stanford University (US)
- Venue
- ACM Journal on Emerging Technologies in Computing Systems
- Published
- 2013-02
- Volume
- 9
- Issue
- 1
- Pages
- 1-14
- ISSN
- 1550-4832 (ISSN-L)
- 1550-4840
- OpenAlex
- W2060598156
- Cited by
- 71
- References
- 40
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 4 · 2023: 6 · 2022: 3 · 2021: 9 · 2020: 8 · 2019: 6 · 2018: 6 · 2017: 5 · 2016: 8 · 2015: 4 · 2014: 8 · 2013: 1
- FWCI
- 4.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACM Journal on Emerging Technologies in Computing Systems (publishedVersion)
- Funders
- E3S Center
- Stanford University
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Semiconductor Devices and Circuit Design
- Keywords
- cross-point memory arrays, grain boundary scattering, electron-surface scattering, memory reliability, current density, 10 nm node
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.