The DOI matches its Crossref record.
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Open accessAbstract
A novel thermal‐management system that incorporates phase‐change material (PCM) is proposed and investigated for electric vehicle (EV) applications. A commercial finite‐element (FE) software, PDEase2D™, was used to simulate the thermal behavior of EV battery modules with a PCM thermal management system. Simulation results show that the temperature profile of the cells integrated in the module design was substantially more uniform during discharge at different rates than without PCM. The PCM system is effective in thermally sensitive batteries such as Li‐ion and most Li‐polymer batteries with a significant reversible heat effect. The heat generated during discharge and stored as latent heat is then largely utilized during charge, and a smaller part of it is transferred to the surroundings. The stored heat will be rejected to the module when the battery is left to relax or when its temperature drops below the melting point of the PCM. This is an important advantage for EV operation under cold conditions or in space applications where the battery temperature drops significantly when an orbiting satellite moves from the light to the dark side of the earth. © 2000 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Yuan, K., Shi, J., Aftab, W., Qin, M., Usman, A., Zhou, F., Lv, Y., Gao, S., & Zou, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904228 · Cited by 459
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Developments in battery thermal management systems for electric vehicles: A technical review
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102255 · Cited by 388
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Thermal management of the lithium-ion battery by the composite PCM-Fin structures
Sun, Z., Fan, R., Yan, F., Zhou, T., & Zheng, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118739 · Cited by 288
Can Li-Ion batteries be the panacea for automotive applications?
Opitz, A., Badami, P., Shen, L., Vignarooban, K., & Kannan, A. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.019 · Cited by 284
Huang, R., Li, Z., Hong, W., Wu, Q., & Yu, X. (2020) · Energy Reports · doi:10.1016/j.egyr.2019.09.060 · Cited by 210
Senol, M., Bayram, I. S., Naderi, Y., & Galloway, S. (2023) · IEEE Access · doi:10.1109/access.2023.3268615 · Cited by 110
Shao, D., Hu, L., Zhang, J., Hu, R., Zhang, G., Jiang, L., Wang, X., & Wen, Y. (2024) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2024.100817 · Cited by 30
Geometry-influenced cooling performance of lithium-ion battery
Dubey, D., Mishra, A., Ghosh, S., Reddy, M. V., & Pandey, R. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120723 · Cited by 25
Analysis of Heat Dissipation and Preheating Module for Vehicle Lithium Iron Phosphate Battery
Zhou, S., Zhao, Y., & Gao, S. (2021) · Energies · doi:10.3390/en14196196 · Cited by 5
Metadata
- Authors
- Hallaj, S. A., & Selman, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2000
- Volume
- 147
- Issue
- 9
- Pages
- 3231
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1572952380
- Cited by
- 662
- References
- 0
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
