The DOI matches its Crossref record.
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Open accessAbstract
Reversible extraction of lithium from (triphylite) and insertion of lithium into at 3.5 V vs. lithium at 0.05 mA/cm 2 shows this material to be an excellent candidate for the cathode of a low‐power, rechargeable lithium battery that is inexpensive, nontoxic, and environmentally benign. Electrochemical extraction was limited to ∼0.6 Li/formula unit; but even with this restriction the specific capacity is 100 to 110 mAh/g. Complete extraction of lithium was performed chemically; it gave a new phase, , isostructural with heterosite, . The framework of the ordered olivine is retained with minor displacive adjustments. Nevertheless the insertion/extraction reaction proceeds via a two‐phase process, and a reversible loss in capacity with increasing current density appears to be associated with a diffusion‐limited transfer of lithium across the two‐phase interface. Electrochemical extraction of lithium from isostructural (M = Mn, Co, or Ni) with an electrolyte was not possible; but successful extraction of lithium from was accomplished with maximum oxidation of the occurring at x = 0.5. The couple was oxidized first at 3.5 V followed by oxidation of the couple at 4.1 V vs. lithium. The interactions appear to destabilize the level and stabilize the level so as to make the energy accessible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Items 101–200 of 377
Current and future lithium-ion battery manufacturing
Liu, Y., Zhang, R., Wang, J., & Wang, Y. (2021) · iScience · doi:10.1016/j.isci.2021.102332 · Cited by 763
Experimental visualization of lithium diffusion in LixFePO4
Nishimura, S.-I., Kobayashi, G., Ohoyama, K., Kanno, R., Yashima, M., & Yamada, A. (2008) · Nature Materials · doi:10.1038/nmat2251 · Cited by 756
Raman Microspectrometry Applied to the Study of Electrode Materials for Lithium Batteries
Baddour-Hadjean, R., & Pereira-Ramos, J.-P. (2010) · Chemical Reviews · doi:10.1021/cr800344k · Cited by 749
Structure and performance of LiFePO4 cathode materials: A review
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.113 · Cited by 743
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Over, H. (2012) · Chemical Reviews · doi:10.1021/cr200247n · Cited by 737
Lithium plating in a commercial lithium-ion battery – A low-temperature aging study
Petzl, M., Kasper, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.065 · Cited by 731
Discharge Model for the Lithium Iron-Phosphate Electrode
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785012 · Cited by 730
Insertion-Type Electrodes for Nonaqueous Li-Ion Capacitors
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2014) · Chemical Reviews · doi:10.1021/cr5000915 · Cited by 726
Theory of Chemical Kinetics and Charge Transfer based on Nonequilibrium Thermodynamics
Bazant, M. Z. (2013) · Accounts of Chemical Research · doi:10.1021/ar300145c · Cited by 724
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Aurbach, D., Markovsky, B., Salitra, G., Markevich, E., Talyossef, Y., Koltypin, M., Nazar, L., Ellis, B., & Kovacheva, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.025 · Cited by 706
Materials Challenges Facing Electrical Energy Storage
Whittingham, M. S. (2008) · MRS Bulletin · doi:10.1557/mrs2008.82 · Cited by 703
The role of nanotechnology in the development of battery materials for electric vehicles
Lu, J., Chen, Z., Ma, Z., Pan, F., Curtiss, L. A., & Amine, K. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.207 · Cited by 700
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Liu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
Lithium extraction/insertion in LiFePO4: an X-ray diffraction and Mössbauer spectroscopy study
Andersson, A. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00311-8 · Cited by 691
Identify capacity fading mechanism in a commercial LiFePO4 cell
Dubarry, M., & Liaw, B. Y. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.036 · Cited by 675
Room-temperature single-phase Li insertion/extraction in nanoscale LixFePO4
Gibot, P., Casas-Cabanas, M., Laffont, L., Levasseur, S., Carlach, P., Hamelet, S., Tarascon, J.-M., & Masquelier, C. (2008) · Nature Materials · doi:10.1038/nmat2245 · Cited by 676
Monodisperse Porous LiFePO4 Microspheres for a High Power Li-Ion Battery Cathode
Sun, C., Rajasekhara, S., Goodenough, J. B., & Zhou, F. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1110464 · Cited by 673
Self-citationWu, X., Jiang, L., Cao, F., Guo, Y., & Wan, L. (2009) · Advanced Materials · doi:10.1002/adma.200802998 · Cited by 672
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Recent Progress in Rechargeable Potassium Batteries
Hwang, J., Myung, S., & Sun, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802938 · Cited by 651
Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries
Peng, L., Zhu, Y., Chen, D., Ruoff, R. S., & Yu, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600025 · Cited by 645
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
Nanostructured electrode materials for electrochemical energy storage and conversion
Manthiram, A., Vadivel Murugan, A., Sarkar, A., & Muraliganth, T. (2008) · Energy & Environmental Science · doi:10.1039/b811802g · Cited by 638
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
Graphene in lithium ion battery cathode materials: A review
Kucinskis, G., Bajars, G., & Kleperis, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.160 · Cited by 628
Size Effects on Carbon-Free LiFePO[sub 4] Powders
Delacourt, C., Poizot, P., Levasseur, S., & Masquelier, C. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2201987 · Cited by 625
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Capturing metastable structures during high-rate cycling of LiFePO 4 nanoparticle electrodes
Liu, H., Strobridge, F. C., Borkiewicz, O. J., Wiaderek, K. M., Chapman, K. W., Chupas, P. J., & Grey, C. P. (2014) · Science · doi:10.1126/science.1252817 · Cited by 622
Delacourt, C., Laffont, L., Bouchet, R., Wurm, C., Leriche, J.-B., Morcrette, M., Tarascon, J.-M., & Masquelier, C. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1884787 · Cited by 619
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Multi-scale computation methods: Their applications in lithium-ion battery research and development
Shi, S., Gao, J., Liu, Y., Zhao, Y., Wu, Q., Ju, W., Ouyang, C., & Xiao, R. (2016) · Chinese Physics B · doi:10.1088/1674-1056/25/1/018212 · Cited by 615
Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions
Darr, J. A., Zhang, J., Makwana, N. M., & Weng, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00417 · Cited by 614
A Critical Review of Machine Learning of Energy Materials
Chen, C., Zuo, Y., Ye, W., Li, X., Deng, Z., & Ong, S. P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903242 · Cited by 609
Critical Review on Low‐Temperature Li‐Ion/Metal Batteries
Zhang, N., Deng, T., Zhang, S., Wang, C., Chen, L., Wang, C., & Fan, X. (2022) · Advanced Materials · doi:10.1002/adma.202107899 · Cited by 604
Issue and challenges facing rechargeable thin film lithium batteries
Patil, A., Patil, V., Wook Shin, D., Choi, J.-W., Paik, D.-S., & Yoon, S.-J. (2008) · Materials Research Bulletin · doi:10.1016/j.materresbull.2007.08.031 · Cited by 601
The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries
Saubanère, M., McCalla, E., Tarascon, J.-M., & Doublet, M.-L. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03048j · Cited by 595
Zhou, L., Zhang, K., Hu, Z., Tao, Z., Mai, L., Kang, Y., Chou, S., & Chen, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701415 · Cited by 593
Kim, H., Park, I., Seo, D.-H., Lee, S., Kim, S.-W., Kwon, W. J., Park, Y.-U., Kim, C. S., Jeon, S., & Kang, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3038646 · Cited by 592
Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.036 · Cited by 592
NASICON‐Structured Materials for Energy Storage
Jian, Z., Hu, Y., Ji, X., & Chen, W. (2017) · Advanced Materials · doi:10.1002/adma.201601925 · Cited by 592
A critical review of cathodes for rechargeable Mg batteries
Mao, M., Gao, T., Hou, S., & Wang, C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00319j · Cited by 591
Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries
Ni, Q., Bai, Y., Wu, F., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201600275 · Cited by 586
Electron Microscopy Study of the LiFePO[sub 4] to FePO[sub 4] Phase Transition
Chen, G., Song, X., & Richardson, T. J. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2192695 · Cited by 583
Lin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O. G., Xin, H. L., Tamura, N., Tian, C., Weng, T.-C., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00007 · Cited by 582
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries
Recham, N., Chotard, J.-N., Dupont, L., Delacourt, C., Walker, W., Armand, M., & Tarascon, J.-M. (2010) · Nature Materials · doi:10.1038/nmat2590 · Cited by 576
Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS
Tang, K., Yu, X., Sun, J., Li, H., & Huang, X. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.02.119 · Cited by 574
A Novel Concept for the Synthesis of an Improved LiFePO[sub 4] Lithium Battery Cathode
Croce, F., D’ Epifanio, A., Hassoun, J., Deptula, A., Olczac, T., & Scrosati, B. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1449302 · Cited by 571
Room-temperature miscibility gap in LixFePO4
Yamada, A., Koizumi, H., Nishimura, S.-I., Sonoyama, N., Kanno, R., Yonemura, M., Nakamura, T., & Kobayashi, Y. (2006) · Nature Materials · doi:10.1038/nmat1634 · Cited by 554
Nano active materials for lithium-ion batteries
Wang, Y., Li, H., He, P., Hosono, E., & Zhou, H. (2010) · Nanoscale · doi:10.1039/c0nr00068j · Cited by 550
Olivine LiFePO4: the remaining challenges for future energy storage
Wang, J., & Sun, X. (2015) · Energy & Environmental Science · doi:10.1039/c4ee04016c · Cited by 550
Fisher, C. A. J., Hart Prieto, V. M., & Islam, M. S. (2008) · Chemistry of Materials · doi:10.1021/cm801262x · Cited by 549
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
Electrochemical Property: Structure Relationships in Monoclinic Li3-yV2(PO4)3
Yin, S.-C., Grondey, H., Strobel, P., Anne, M., & Nazar, L. F. (2003) · Journal of the American Chemical Society · doi:10.1021/ja034565h · Cited by 546
A disordered rock salt anode for fast-charging lithium-ion batteries
Liu, H., Zhu, Z., Yan, Q., Yu, S., He, X., Chen, Y., Zhang, R., Ma, L., Liu, T., Li, M., et al. (2020) · Nature · doi:10.1038/s41586-020-2637-6 · Cited by 546
Meng, Y. S., & Arroyo-de Dompablo, M. E. (2009) · Energy & Environmental Science · doi:10.1039/b901825e · Cited by 545
Study of the LiFePO4/FePO4 Two-Phase System by High-Resolution Electron Energy Loss Spectroscopy
Laffont, L., Delacourt, C., Gibot, P., Wu, M. Y., Kooyman, P., Masquelier, C., & Tarascon, J. M. (2006) · Chemistry of Materials · doi:10.1021/cm0617182 · Cited by 539
Template-Directed Materials for Rechargeable Lithium-Ion Batteries
Cheng, F., Tao, Z., Liang, J., & Chen, J. (2008) · Chemistry of Materials · doi:10.1021/cm702091q · Cited by 537
Liu, X.-M., Huang, Z. D., Oh, S. W., Zhang, B., Ma, P.-C., Yuen, M. M. F., & Kim, J.-K. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.11.019 · Cited by 537
Graphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
Li ion battery materials with core–shell nanostructures
Su, L., Jing, Y., & Zhou, Z. (2011) · Nanoscale · doi:10.1039/c1nr10550g · Cited by 526
Recent Progress in Organic Electrodes for Li and Na Rechargeable Batteries
Lee, S., Kwon, G., Ku, K., Yoon, K., Jung, S., Lim, H., & Kang, K. (2018) · Advanced Materials · doi:10.1002/adma.201704682 · Cited by 525
The existence of a temperature-driven solid solution in LixFePO4 for 0 ≤ x ≤ 1
Delacourt, C., Poizot, P., Tarascon, J.-M., & Masquelier, C. (2005) · Nature Materials · doi:10.1038/nmat1335 · Cited by 524
Kinetics of non-equilibrium lithium incorporation in LiFePO4
Malik, R., Zhou, F., & Ceder, G. (2011) · Nature Materials · doi:10.1038/nmat3065 · Cited by 523
Structure and Stability of Sodium Intercalated Phases in Olivine FePO4
Moreau, P., Guyomard, D., Gaubicher, J., & Boucher, F. (2010) · Chemistry of Materials · doi:10.1021/cm101377h · Cited by 517
Comparative Issues of Cathode Materials for Li-Ion Batteries
Julien, C., Mauger, A., Zaghib, K., & Groult, H. (2014) · Inorganics · doi:10.3390/inorganics2010132 · Cited by 513
Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511
Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries
Yan, C., Xu, R., Xiao, Y., Ding, J., Xu, L., Li, B., & Huang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909887 · Cited by 510
Khan, F. M. N. U., Rasul, M. G., Sayem, A. S. M., & Mandal, N. K. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108033 · Cited by 507
Electrochemical Methods for Lithium Recovery: A Comprehensive and Critical Review
Battistel, A., Palagonia, M. S., Brogioli, D., La Mantia, F., & Trócoli, R. (2020) · Advanced Materials · doi:10.1002/adma.201905440 · Cited by 504
Combination of Lightweight Elements and Nanostructured Materials for Batteries
Chen, J., & Cheng, F. (2009) · Accounts of Chemical Research · doi:10.1021/ar800229g · Cited by 502
Batteries based on fluoride shuttle
Anji Reddy, M., & Fichtner, M. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm13535j · Cited by 501
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Zhu, Y., Xu, Y., Liu, Y., Luo, C., & Wang, C. (2013) · Nanoscale · doi:10.1039/c2nr32758a · Cited by 500
Toward Direct Regeneration of Spent Lithium-Ion Batteries: A Next-Generation Recycling Method
Wang, J., Ma, J., Zhuang, Z., Liang, Z., Jia, K., Ji, G., Zhou, G., & Cheng, H.-M. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00884 · Cited by 500
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Graphene modified LiFePO4 cathode materials for high power lithium ion batteries
Zhou, X., Wang, F., Zhu, Y., & Liu, Z. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03287e · Cited by 498
Zhou, J., Li, R., Fan, X., Chen, Y., Han, R., Li, W., Zheng, J., Wang, B., & Li, X. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01382d · Cited by 492
Suppression of Phase Separation in LiFePO4 Nanoparticles During Battery Discharge
Bai, P., Cogswell, D. A., & Bazant, M. Z. (2011) · Nano Letters · doi:10.1021/nl202764f · Cited by 490
Wang, B., Al Abdulla, W., Wang, D., & Zhao, X. S. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03825h · Cited by 487
Heterogeneous nanostructured electrode materials for electrochemical energy storage
Liu, R., Duay, J., & Lee, S. B. (2011) · Chem. Commun. · doi:10.1039/c0cc03158e · Cited by 486
Eshetu, G. G., Zhang, H., Judez, X., Adenusi, H., Armand, M., Passerini, S., & Figgemeier, E. (2021) · Nature Communications · doi:10.1038/s41467-021-25334-8 · Cited by 485
Brief History of Early Lithium-Battery Development
Reddy, M. V., Mauger, A., Julien, C. M., Paolella, A., & Zaghib, K. (2020) · Materials · doi:10.3390/ma13081884 · Cited by 483
Vanadium‐Based Nanomaterials: A Promising Family for Emerging Metal‐Ion Batteries
Xu, X., Xiong, F., Meng, J., Wang, X., Niu, C., An, Q., & Mai, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904398 · Cited by 482
High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells
Amine, K., Liu, J., & Belharouak, I. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.04.018 · Cited by 480
Recent progress of surface coating on cathode materials for high-performance lithium-ion batteries
Guan, P., Zhou, L., Yu, Z., Sun, Y., Liu, Y., Wu, F., Jiang, Y., & Chu, D. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.08.022 · Cited by 479
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries
He, P., Yu, H., Li, D., & Zhou, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14305d · Cited by 472
Recent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
LiMnPO4 – A next generation cathode material for lithium-ion batteries
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01393b · Cited by 466
A Review of the Design of Advanced Binders for High‐Performance Batteries
Zou, F., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002508 · Cited by 465
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
Selective recovery of lithium from spent lithium iron phosphate batteries: a sustainable process
Yang, Y., Meng, X., Cao, H., Lin, X., Liu, C., Sun, Y., Zhang, Y., & Sun, Z. (2018) · Green Chemistry · doi:10.1039/c7gc03376a · Cited by 459
Battery Technologies for Large-Scale Stationary Energy Storage
Soloveichik, G. L. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114116 · Cited by 459
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Kuznetsov, D. A., Han, B., Yu, Y., Rao, R. R., Hwang, J., Román-Leshkov, Y., & Shao-Horn, Y. (2018) · Joule · doi:10.1016/j.joule.2017.11.014 · Cited by 452
Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries
Takahashi, M. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00064-4 · Cited by 452
Metadata
- Authors
- Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1997-04-01
- Volume
- 144
- Issue
- 4
- Pages
- 1188-1194
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2152510783
- Cited by
- 7,933
- References
- 0
- FWCI
- 5.53
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.