The DOI matches its Crossref record.
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Open accessAbstract
Reversible extraction of lithium from (triphylite) and insertion of lithium into at 3.5 V vs. lithium at 0.05 mA/cm 2 shows this material to be an excellent candidate for the cathode of a low‐power, rechargeable lithium battery that is inexpensive, nontoxic, and environmentally benign. Electrochemical extraction was limited to ∼0.6 Li/formula unit; but even with this restriction the specific capacity is 100 to 110 mAh/g. Complete extraction of lithium was performed chemically; it gave a new phase, , isostructural with heterosite, . The framework of the ordered olivine is retained with minor displacive adjustments. Nevertheless the insertion/extraction reaction proceeds via a two‐phase process, and a reversible loss in capacity with increasing current density appears to be associated with a diffusion‐limited transfer of lithium across the two‐phase interface. Electrochemical extraction of lithium from isostructural (M = Mn, Co, or Ni) with an electrolyte was not possible; but successful extraction of lithium from was accomplished with maximum oxidation of the occurring at x = 0.5. The couple was oxidized first at 3.5 V followed by oxidation of the couple at 4.1 V vs. lithium. The interactions appear to destabilize the level and stabilize the level so as to make the energy accessible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Items 301–377 of 377
Fan, M., Meng, Q., Chang, X., Gu, C., Meng, X., Yin, Y., Li, H., Wan, L., & Guo, Y. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103630 · Cited by 313
Na3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries
Gao, H., Seymour, I. D., Xin, S., Xue, L., Henkelman, G., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11388 · Cited by 312
Self-citationLiMn0.8Fe0.2PO4: An Advanced Cathode Material for Rechargeable Lithium Batteries
Martha, S. K., Grinblat, J., Haik, O., Zinigrad, E., Drezen, T., Miners, J. H., Exnar, I., Kay, A., Markovsky, B., & Aurbach, D. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200903587 · Cited by 311
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Challenges and Prospects of Sodium‐Ion and Potassium‐Ion Batteries for Mass Production
Sada, K., Darga, J., & Manthiram, A. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202302321 · Cited by 308
Calculations of Li-Ion Diffusion in Olivine Phosphates
Dathar, G. K. P., Sheppard, D., Stevenson, K. J., & Henkelman, G. (2011) · Chemistry of Materials · doi:10.1021/cm201604g · Cited by 307
Separation of Charge Transfer and Contact Resistance in LiFePO4-Cathodes by Impedance Modeling
Illig, J., Ender, M., Chrobak, T., Schmidt, J. P., Klotz, D., & Ivers-Tiffée, E. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030207jes · Cited by 307
A brief history of zinc–air batteries: 140 years of epic adventures
Liu, J.-N., Zhao, C.-X., Wang, J., Ren, D., Li, B.-Q., & Zhang, Q. (2022) · Energy & Environmental Science · doi:10.1039/d2ee02440c · Cited by 307
Recent advances in energy materials by electrospinning
Liu, Q., Zhu, J., Zhang, L., & Qiu, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.281 · Cited by 306
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 306
Advanced Electrode Materials in Lithium Batteries: Retrospect and Prospect
Shen, X., Zhang, X.-Q., Ding, F., Huang, J.-Q., Xu, R., Chen, X., Yan, C., Su, F.-Y., Chen, C.-M., Liu, X., et al. (2021) · Energy Material Advances · doi:10.34133/2021/1205324 · Cited by 306
Hong, J., Lim, H.-D., Lee, M., Kim, S.-W., Kim, H., Oh, S.-T., Chung, G.-C., & Kang, K. (2012) · Chemistry of Materials · doi:10.1021/cm3005634 · Cited by 304
Wood‐Inspired High‐Performance Ultrathick Bulk Battery Electrodes
Lu, L., Lu, Y., Xiao, Z., Zhang, T., Zhou, F., Ma, T., Ni, Y., Yao, H., Yu, S., & Cui, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706745 · Cited by 304
Flexible and planar graphene conductive additives for lithium-ion batteries
Su, F.-Y., You, C., He, Y.-B., Lv, W., Cui, W., Jin, F., Li, B., Yang, Q.-H., & Kang, F. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01633k · Cited by 304
Exploration of Advanced Electrode Materials for Rechargeable Sodium‐Ion Batteries
Sun, Y., Guo, S., & Zhou, H. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201800212 · Cited by 303
Materials for lithium recovery from salt-lake brine
Xu, P., Hong, J., Qian, X., Xu, Z., Xia, H., Tao, X., Xu, Z., & Ni, Q.-Q. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05019-1 · Cited by 296
Dedryvère, R., Foix, D., Franger, S., Patoux, S., Daniel, L., & Gonbeau, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1026509 · Cited by 301
Bhatt, M. D., & O'Dwyer, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05552g · Cited by 300
Schindler, S., Bauer, M., Petzl, M., & Danzer, M. A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.044 · Cited by 299
Kim, Y., Seong, W. M., & Manthiram, A. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.09.020 · Cited by 299
First-principles study of Li ion diffusion inLiFePO4
Ouyang, C., Shi, S., Wang, Z., Huang, X., & Chen, L. (2004) · Physical Review B · doi:10.1103/physrevb.69.104303 · Cited by 297
Some transition metal (oxy)phosphates and vanadium oxides for lithium batteries
Whittingham, M. S., Song, Y., Lutta, S., Zavalij, P. Y., & Chernova, N. A. (2005) · Journal of Materials Chemistry · doi:10.1039/b501961c · Cited by 296
A Dual−Ion Battery Cathode via Oxidative Insertion of Anions in a Metal–Organic Framework
Aubrey, M. L., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08022 · Cited by 294
Sarasketa-Zabala, E., Gandiaga, I., Rodriguez-Martinez, L. M., & Villarreal, I. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.051 · Cited by 293
A comparative XPS surface study of Li2FeSiO4/C cycled with LiTFSI- and LiPF6-based electrolytes
Ensling, D., Stjerndahl, M., Nytén, A., Gustafsson, T., & Thomas, J. O. (2009) · J. Mater. Chem. · doi:10.1039/b813099j · Cited by 293
Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries
Massé, R. C., Uchaker, E., & Cao, G. (2015) · Science China Materials · doi:10.1007/s40843-015-0084-8 · Cited by 292
LiFePO[sub 4] Synthesis Routes for Enhanced Electrochemical Performance
Franger, S., Le Cras, F., Bourbon, C., & Rouault, H. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1506962 · Cited by 290
Kinetic study on LiFePO4/C nanocomposites synthesized by solid state technique
Liu, H., Li, C., Zhang, H. P., Fu, L. J., Wu, Y. P., & Wu, H. Q. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.098 · Cited by 289
Mueller, T., Hautier, G., Jain, A., & Ceder, G. (2011) · Chemistry of Materials · doi:10.1021/cm200753g · Cited by 289
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
3D Porous Sponge‐Inspired Electrode for Stretchable Lithium‐Ion Batteries
Liu, W., Chen, Z., Zhou, G., Sun, Y., Lee, H. R., Liu, C., Yao, H., Bao, Z., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505299 · Cited by 287
Burgeoning Prospects of Spent Lithium‐Ion Batteries in Multifarious Applications
Natarajan, S., & Aravindan, V. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802303 · Cited by 287
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Isolation of Solid Solution Phases in Size‐Controlled LixFePO4 at Room Temperature
Kobayashi, G., Nishimura, S., Park, M., Kanno, R., Yashima, M., Ida, T., & Yamada, A. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801522 · Cited by 284
Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Tirado, J. L. (2003) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00125-0 · Cited by 283
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Porous olivine composites synthesized by sol–gel technique
Dominko, R., Bele, M., Gaberscek, M., Remskar, M., Hanzel, D., Goupil, J. M., Pejovnik, S., & Jamnik, J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.033 · Cited by 282
Ong, S. P., Jain, A., Hautier, G., Kang, B., & Ceder, G. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.01.010 · Cited by 282
Rhombohedral Form of Li3V2(PO4)3 as a Cathode in Li-Ion Batteries
Gaubicher, J., Wurm, C., Goward, G., Masquelier, C., & Nazar, L. (2000) · Chemistry of Materials · doi:10.1021/cm000345g · Cited by 278
Recent Progress in Nanostructured Cathode Materials for Lithium Secondary Batteries
Song, H., Lee, K. T., Kim, M. G., Nazar, L. F., & Cho, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000231 · Cited by 278
Side by Side Battery Technologies with Lithium‐Ion Based Batteries
Durmus, Y. E., Zhang, H., Baakes, F., Desmaizieres, G., Hayun, H., Yang, L., Kolek, M., Küpers, V., Janek, J., Mandler, D., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000089 · Cited by 278
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Synthesis and electrochemical analysis of vapor-deposited carbon-coated LiFePO4
Belharouak, I., Johnson, C., & Amine, K. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.06.019 · Cited by 272
Paolella, A., Faure, C., Bertoni, G., Marras, S., Guerfi, A., Darwiche, A., Hovington, P., Commarieu, B., Wang, Z., Prato, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms14643 · Cited by 272
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Grolleau, S., Delaille, A., Gualous, H., Gyan, P., Revel, R., Bernard, J., Redondo-Iglesias, E., & Peter, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.098 · Cited by 268
Study of the Li-insertion/extraction process in LiFePO4/FePO4
Ramana, C. V., Mauger, A., Gendron, F., Julien, C. M., & Zaghib, K. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.042 · Cited by 268
Liu, D., & Cao, G. (2010) · Energy & Environmental Science · doi:10.1039/b922656g · Cited by 268
Mesoporous Amorphous FePO4Nanospheres as High-Performance Cathode Material for Sodium-Ion Batteries
Fang, Y., Xiao, L., Qian, J., Ai, X., Yang, H., & Cao, Y. (2014) · Nano Letters · doi:10.1021/nl501152f · Cited by 268
Insights on the Mechanism of Na-Ion Storage in Soft Carbon Anode
Jian, Z., Bommier, C., Luo, L., Li, Z., Wang, W., Wang, C., Greaney, P. A., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05474 · Cited by 267
Al Zoubi, W., Kamil, M. P., Fatimah, S., Nashrah, N., & Ko, Y. G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100663 · Cited by 265
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Surface modification by silver coating for improving electrochemical properties of LiFePO4
Park, K. S., Son, J. T., Chung, H. T., Kim, S. J., Lee, C. H., Kang, K. T., & Kim, H. G. (2004) · Solid State Communications · doi:10.1016/j.ssc.2003.10.015 · Cited by 264
Materials for Rechargeable Lithium-Ion Batteries
Hayner, C. M., Zhao, X., & Kung, H. H. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081024 · Cited by 263
Shen, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01228g · Cited by 263
Franco, A. A. (2013) · RSC Advances · doi:10.1039/c3ra23502e · Cited by 262
The effect of carbon coating thickness on the capacity of LiFePO4/C composite cathodes
Cho, Y.-D., Fey, G. T.-K., & Kao, H.-M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.053 · Cited by 261
Ceder, G. (2010) · MRS Bulletin · doi:10.1557/mrs2010.681 · Cited by 257
Li extraction from high Mg/Li ratio brine with LiFePO4/FePO4 as electrode materials
Zhao, Z., Si, X., Liu, X., He, L., & Liang, X. (2013) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.11.013 · Cited by 257
Horiba, T. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2319832 · Cited by 218
Lithium Recovery Using Electrochemical Technologies: Advances and Challenges
Wu, L., Zhang, C., Kim, S., Hatton, T. A., Mo, H., & Waite, T. D. (2022) · Water Research · doi:10.1016/j.watres.2022.118822 · Cited by 214
A Generalized SOC-OCV Model for Lithium-Ion Batteries and the SOC Estimation for LNMCO Battery
Zhang, C., Jiang, J., Zhang, L., Liu, S., Wang, L., & Loh, P. (2016) · Energies · doi:10.3390/en9110900 · Cited by 213
Sarasketa-Zabala, E., Gandiaga, I., Martinez-Laserna, E., Rodriguez-Martinez, L. M., & Villarreal, I. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.153 · Cited by 210
Review on the Electrochemical Extraction of Lithium from Seawater/Brine
Zhao, X., Yang, H., Wang, Y., & Sha, Z. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.113389 · Cited by 199
Omar, N., Daowd, M., Bossche, P. V. D., Hegazy, O., Smekens, J., Coosemans, T., & Mierlo, J. V. (2012) · Energies · doi:10.3390/en5082952 · Cited by 178
Ji, B., Zhang, F., Sheng, M., Tong, X., & Tang, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604219 · Cited by 160
Lee, H., Lim, H.-S., Ren, X., Yu, L., Engelhard, M. H., Han, K. S., Lee, J., Kim, H.-T., Xiao, J., Liu, J., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01819 · Cited by 150
Zhao, N., Li, Y., Zhao, X., Zhi, X., & Liang, G. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.04.070 · Cited by 120
Spinner, N. S., Love, C. T., Rose-Pehrsson, S. L., & Tuttle, S. G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.06.003 · Cited by 118
Luo, G., Li, X., Chen, L., Chao, Y., & Zhu, W. (2023) · Desalination · doi:10.1016/j.desal.2022.116228 · Cited by 69
Brand, M., Gläser, S., Geder, J., Menacher, S., Obpacher, S., Jossen, A., & Quinger, D. (2013) · World Electric Vehicle Journal · doi:10.3390/wevj6030572 · Cited by 68
Brand, M., Glaser, S., Geder, J., Menacher, S., Obpacher, S., Jossen, A., & Quinger, D. (2013) · 2013 World Electric Vehicle Symposium and Exhibition (EVS27) · doi:10.1109/evs.2013.6914893 · Cited by 59
Qin, R., Wei, Y., Zhai, T., & Li, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01124a · Cited by 58
Jian, Z., Han, W., Liang, Y., Lan, Y., Fang, Z., Hu, Y.-S., & Yao, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04630g · Cited by 49
Mamadou, K., Delaille, A., Lemaire-Potteau, E., & Bultel, Y. (2010) · ECS Transactions · doi:10.1149/1.3414008 · Cited by 45
Effect of microstructure on low temperature electrochemical properties of LiFePO4/C cathode material
Zhao, N., Zhi, X., Wang, L., Liu, Y., & Liang, G. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.097 · Cited by 39
Metadata
- Authors
- Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1997-04-01
- Volume
- 144
- Issue
- 4
- Pages
- 1188-1194
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2152510783
- Cited by
- 7,933
- References
- 0
- FWCI
- 5.53
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.