The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Catalyst Layer Ink Interactions That Affect Coatability
Open accessAbstract
Catalyst layer inks are examples of biphasic material systems composed of a solid material, a polymer, and a solvent. Nanoscale interactions between the individual constituents can alter macroscopic properties that are relevant for coating and manufacturing processes (i.e. viscosity, surface tension, aggregation, and rheology). Control over these macroscale properties are important for controlled electrode formation during scalable roll-to-roll manufacturing. The underlying interactions include polymer|particle, particle|solvent, and polymer|solvent interactions. In this work we systematically investigate polymer|particle interactions via studying a range of formulated inks composed of different solvents (methanol, isopropyl alcohol, octanol, and water), varying polymer loadings, and particles with different surface charges. Ink aging is also addressed and over short time periods (<1 hr shelf life) the addition of a perfluorosulfonic acid ionomer was shown to stabilize the ink and also decrease the aggregation size. However, over long time periods (168 hrs) the aggregation size is independent of polymer loading, and approaches a steady state aggregation size around 350 nm. This equilibrium point suggests that the polymer is free to diffuse, adsorb, and relax within the excluded volume region. Furthermore, these results suggest that primary aggregates can be broken up with the addition of very low polymer loadings (15% I:C). A semi-empirical model is used to describe polymer|particle interactions within the ink, and the polymer coverage at the surface of the carbon was found to be the most sensitive parameter dictating ink stability. Finally, coating and rheology experiments are completed on all inks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“However, the addition of catalyst and ionomer will change the surface tension [33].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [33]
The cited source says what the claim attributes to it.
In the citing paper
“The catalyst coating quality is determined by balancing the stability of the catalyst ink and the coating conditions [205].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [205]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Polymeric stabilization of colloidal dispersions
Napper, D. H. (1983) · Medical Entomology and Zoology · Cited by 2,279
Untersuchungen über die Reibung und Adhäsion, IV: Theorie des Anhaftens kleiner Teilchen
Derjaguin, B. (1934) · Kolloid-Zeitschrift · doi:10.1007/bf01433225 · Cited by 2,027
Electrokinetic and Colloid Transport Phenomena
Masliyah, J. H., & Bhattacharjee, S. (2006) · Wiley eBooks · doi:10.1002/0471799742 · Cited by 1,129
Self-Assembly of Ordered Microporous Materials from Rod-Coil Block Copolymers
Jenekhe, S. A., & Chen, X. L. (1999) · Science · doi:10.1126/science.283.5400.372 · Cited by 929
Polymer solutions near an interface. Adsorption and depletion layers
De Gennes, P. G. (1981) · Macromolecules · doi:10.1021/ma50007a007 · Cited by 763
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Dispersions of Surface‐Modified Carbon Nanotubes in Water‐Soluble and Water‐Insoluble Polymers
Vaisman, L., Marom, G., & Wagner, H. D. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500142 · Cited by 393
Polymers at an interface. 2. Interaction between two plates carrying adsorbed polymer layers
De Gennes, P. G. (1982) · Macromolecules · doi:10.1021/ma00230a055 · Cited by 370
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“The catalyst coating quality is determined by balancing the stability of the catalyst ink and the coating conditions [205].”
Chen, M., Zhao, C., Sun, F., Fan, J., Li, H., & Wang, H. (2020) · eTransportation · doi:10.1016/j.etran.2020.100075 · Cited by 212
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“In terms of electrostatic stability, stability in water-based inks can generally be described using the classic Derjaguin–Landau–Verwey–Overbeek (DLVO) theory, whereas the stability of non-aqueous inks can be described using a semi-empirical model based on the extended DLVO theory [10, 94, 98].”
BackgroundMethodInfluentialRheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Controlling cracking formation in fuel cell catalyst layers
Kumano, N., Kudo, K., Suda, A., Akimoto, Y., Ishii, M., & Nakamura, H. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.058 · Cited by 135
Metadata
- Authors
- Dixit, M. B., Harkey, B. A., Shen, F., & Hatzell, K. B.
- Affiliations
- Vanderbilt University (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2018
- Volume
- 165
- Issue
- 5
- Pages
- F264-F271
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2793572675
- Cited by
- 126
- References
- 45
- Citations by year
- 2026: 8 · 2025: 24 · 2024: 20 · 2023: 14 · 2022: 11 · 2021: 19 · 2020: 14 · 2019: 11 · 2018: 5
- FWCI
- 4.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- Funders
- National Science Foundation (NSF) (1727863)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- polymer-particle interactions, ink stability, particle aggregation, perfluorosulfonic acid ionomer, carbon particles, roll-to-roll processing, ink aging, rheology, viscosity, surface tension, polymer loading, solvent effects
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Catalyst Layer Ink Interactions That Affect Coatability. https://app.cochat.ai/papers/10.1149/2.0191805jes
- The paper
- Dixit, M. B., Harkey, B. A., Shen, F., & Hatzell, K. B. (2018). Catalyst Layer Ink Interactions That Affect Coatability. Journal of The Electrochemical Society. https://doi.org/10.1149/2.0191805jes
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.