The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Exploring the Impact of Mechanical Pressure on the Performance of Anode-Free Lithium Metal Cells
Open accessAbstract
In the pursuit of surpassing the energy density of conventional lithium ion cells, significant efforts have been made to develop lithium metal cells. However, many reports in the literature utilize Li-metal cells with significant excess lithium, resulting in a dramatically reduced practical energy density. In contrast, anode-free cells do not utilize excess lithium; instead, a lithium metal anode is formed in-situ from the stored lithium within the positive electrode during the first charge. Here, we evaluate anode-free lithium metal pouch cells (NMC532||Cu) with operando pressure measurements constrained to different stack pressures between 75–2205 kPa with two different electrolytes, 1M LiPF 6 FEC:DEC (1:2) and 1M LiPF 6 FEC:TFEC (1:2). Increasing the initial average pressure from 75–2200 kPa was found to generally improve cycle life, with the most significant benefits achieved up to 1200 kPa. Cells containing FEC:TFEC electrolyte exhibited a superior initial performance compared to FEC:DEC cells, as evidenced by cycling data and SEM analysis of the lithium morphology. Although generally beneficial, we found that the effect of increased pressure on the performance of cells with different solvent systems was not equal, indicating that the physical properties of electrolyte play an important roll in cells constrained to higher pressures between 1200–2200 kPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Electrolyte additive enabled fast charging and stable cycling lithium metal batteries
Zheng, J., Engelhard, M. H., Mei, D., Jiao, S., Polzin, B. J., Zhang, J.-G., & Xu, W. (2017) · Nature Energy · doi:10.1038/nenergy.2017.12 · Cited by 1,343
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Fan, X., Chen, L., Ji, X., Deng, T., Hou, S., Chen, J., Zheng, J., Wang, F., Jiang, J., Xu, K., et al. (2018) · Chem · doi:10.1016/j.chempr.2017.10.017 · Cited by 961
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Anode‐Free Rechargeable Lithium Metal Batteries
Qian, J., Adams, B. D., Zheng, J., Xu, W., Henderson, W. A., Wang, J., Bowden, M. E., Xu, S., Hu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602353 · Cited by 746
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Markevich, E., Salitra, G., Chesneau, F., Schmidt, M., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00300 · Cited by 453
Lithium metal stripping/plating mechanisms studies: A metallurgical approach
Gireaud, L., Grugeon, S., Laruelle, S., Yrieix, B., & Tarascon, J.-M. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.07.037 · Cited by 436
Nanodiamonds suppress the growth of lithium dendrites
Cheng, X.-B., Zhao, M.-Q., Chen, C., Pentecost, A., Maleski, K., Mathis, T., Zhang, X.-Q., Zhang, Q., Jiang, J., & Gogotsi, Y. (2017) · Nature Communications · doi:10.1038/s41467-017-00519-2 · Cited by 401
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Historical development of secondary lithium batteries
BRANDT, K. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90408-1 · Cited by 366
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
Zheng, J., Yan, P., Mei, D., Engelhard, M. H., Cartmell, S. S., Polzin, B. J., Wang, C., Zhang, J., & Xu, W. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502151 · Cited by 337
Ding, F., Xu, W., Chen, X., Zhang, J., Engelhard, M. H., Zhang, Y., Johnson, B. R., Crum, J. V., Blake, T. A., Liu, X., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.100310jes · Cited by 334
An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal
Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315
Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615733114 · Cited by 302
State of health and charge measurements in lithium-ion batteries using mechanical stress
Cannarella, J., & Arnold, C. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.003 · Cited by 278
Louli, A. J., Ellis, L. D., & Dahn, J. R. (2019) · Joule · doi:10.1016/j.joule.2018.12.009 · Cited by 278
Self-citationSuppression of dendritic lithium formation by using concentrated electrolyte solutions
Jeong, S.-K., Seo, H.-Y., Kim, D.-H., Han, H.-K., Kim, J.-G., Lee, Y. B., Iriyama, Y., Abe, T., & Ogumi, Z. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.02.006 · Cited by 211
Ren, X., Zhang, Y., Engelhard, M. H., Li, Q., Zhang, J.-G., & Xu, W. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00982 · Cited by 194
Core–Shell Nanoparticle Coating as an Interfacial Layer for Dendrite-Free Lithium Metal Anodes
Liu, W., Li, W., Zhuo, D., Zheng, G., Lu, Z., Liu, K., & Cui, Y. (2017) · ACS Central Science · doi:10.1021/acscentsci.6b00389 · Cited by 185
Gu, Y., Xu, H., Zhang, X., Wang, W., He, J., Tang, S., Yan, J., Wu, D., Zheng, M., Dong, Q., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812523 · Cited by 184
Measuring the Coulombic Efficiency of Lithium Metal Cycling in Anode-Free Lithium Metal Batteries
Genovese, M., Louli, A. J., Weber, R., Hames, S. G., & Dahn, J. R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0641814jes · Cited by 148
Self-citationvon Sacken, U., Nodwell, E., Sundher, A., & Dahn, J. R. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02076-f · Cited by 143
Self-citationInfluence of Electrolyte on Lithium Cycling Efficiency with Pressurized Electrode Stack
Hirai, T., Yoshimatsu, I., & Yamaki, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054778 · Cited by 127
Brown, Z. L., Jurng, S., Nguyen, C. C., & Lucht, B. L. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00705 · Cited by 125
Ionic liquid electrolyte with highly concentrated LiTFSI for lithium metal batteries
Zhang, H., Qu, W., Chen, N., Huang, Y., Li, L., Wu, F., & Chen, R. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.231 · Cited by 105
Effects of physical constraints on Li cyclability
Wilkinson, D. P., Blom, H. P., Brandt, K., & Wainwright, D. (1991) · Journal of Power Sources · doi:10.1016/0378-7753(91)80077-b · Cited by 98
Cited by
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Strategies towards enabling lithium metal in batteries: interphases and electrodes
Horstmann, B., Shi, J., Amine, R., Werres, M., He, X., Jia, H., Hausen, F., Cekic-Laskovic, I., Wiemers-Meyer, S., Lopez, J., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00767j · Cited by 298
Metadata
- Authors
- Louli, A. J., Genovese, M., Weber, R., Hames, S. G., Logan, E. R., & Dahn, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2019
- Volume
- 166
- Issue
- 8
- Pages
- A1291-A1299
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2935986704
- Cited by
- 282
- References
- 44
- FWCI
- 11.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
