Catalyst Layer Ink Interactions That Affect Coatability
Open accessThe DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
Catalyst layer inks are examples of biphasic material systems composed of a solid material, a polymer, and a solvent. Nanoscale interactions between the individual constituents can alter macroscopic properties that are relevant for coating and manufacturing processes (i.e. viscosity, surface tension, aggregation, and rheology). Control over these macroscale properties are important for controlled electrode formation during scalable roll-to-roll manufacturing. The underlying interactions include polymer|particle, particle|solvent, and polymer|solvent interactions. In this work we systematically investigate polymer|particle interactions via studying a range of formulated inks composed of different solvents (methanol, isopropyl alcohol, octanol, and water), varying polymer loadings, and particles with different surface charges. Ink aging is also addressed and over short time periods (<1 hr shelf life) the addition of a perfluorosulfonic acid ionomer was shown to stabilize the ink and also decrease the aggregation size. However, over long time periods (168 hrs) the aggregation size is independent of polymer loading, and approaches a steady state aggregation size around 350 nm. This equilibrium point suggests that the polymer is free to diffuse, adsorb, and relax within the excluded volume region. Furthermore, these results suggest that primary aggregates can be broken up with the addition of very low polymer loadings (15% I:C). A semi-empirical model is used to describe polymer|particle interactions within the ink, and the polymer coverage at the surface of the carbon was found to be the most sensitive parameter dictating ink stability. Finally, coating and rheology experiments are completed on all inks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“However, the addition of catalyst and ionomer will change the surface tension [33].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [33]
The cited source says what the claim attributes to it.
In the citing paper
“The catalyst coating quality is determined by balancing the stability of the catalyst ink and the coating conditions [205].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [205]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Polymeric stabilization of colloidal dispersions
Napper, D. H. (1983) · Medical Entomology and Zoology · Cited by 2,279
Untersuchungen über die Reibung und Adhäsion, IV: Theorie des Anhaftens kleiner Teilchen
Derjaguin, B. (1934) · Kolloid-Zeitschrift · doi:10.1007/bf01433225 · Cited by 2,027
Electrokinetic and Colloid Transport Phenomena
Masliyah, J. H., & Bhattacharjee, S. (2006) · Wiley eBooks · doi:10.1002/0471799742 · Cited by 1,129
Self-Assembly of Ordered Microporous Materials from Rod-Coil Block Copolymers
Jenekhe, S. A., & Chen, X. L. (1999) · Science · doi:10.1126/science.283.5400.372 · Cited by 929
Polymer solutions near an interface. Adsorption and depletion layers
De Gennes, P. G. (1981) · Macromolecules · doi:10.1021/ma50007a007 · Cited by 763
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Dispersions of Surface‐Modified Carbon Nanotubes in Water‐Soluble and Water‐Insoluble Polymers
Vaisman, L., Marom, G., & Wagner, H. D. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500142 · Cited by 393
Polymers at an interface. 2. Interaction between two plates carrying adsorbed polymer layers
De Gennes, P. G. (1982) · Macromolecules · doi:10.1021/ma00230a055 · Cited by 370
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Subbaraman, R., Strmcnik, D., Stamenkovic, V., & Markovic, N. M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp100814x · Cited by 217
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Particle size and zeta potential of carbon black in liquid media
Xu, R., Wu, C., & Xu, H. (2007) · Carbon · doi:10.1016/j.carbon.2007.09.010 · Cited by 208
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Screen-printing inks for the fabrication of solid oxide fuel cell films: A review
Somalu, M. R., Muchtar, A., Daud, W. R. W., & Brandon, N. P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.008 · Cited by 178
Rheology of Dispersions: Principles and Applications
Tadros, T. F. (2010) · Wiley eBooks · doi:10.1002/9783527631568 · Cited by 173
Selomulya, C., Bushell, G. C., Amal, R., & Waite, T. D. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00523-7 · Cited by 148
PEFC catalyst layer: Recent advances in materials, microstructural characterization, and modeling
Karan, K. (2017) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2017.08.018 · Cited by 142
Suzuki, T., Tsushima, S., & Hirai, S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.06.090 · Cited by 140
Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Shukla, S., Domican, K., Karan, K., Bhattacharjee, S., & Secanell, M. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.028 · Cited by 133
Kim, T.-H., Yi, J.-Y., Jung, C.-Y., Jeong, E., & Yi, S.-C. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.12.015 · Cited by 127
A population balance model for flocculation of colloidal suspensions by polymer bridging
Runkana, V., Somasundaran, P., & Kapur, P. C. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2005.01.046 · Cited by 126
19F NMR studies of Nafion™ ionomer adsorption on PEMFC catalysts and supporting carbons
MA, S., CHEN, Q., JOGENSEN, F., Stein, P. C., & Skou, E. M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.10.007 · Cited by 120
Coating and Drying Defects: Troubleshooting Operating Problems
Gutoff, E. B., & Cohen, E. D. (2006) · Wiley eBooks · doi:10.1002/0470044136 · Cited by 106
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Self-citationZamel, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.091 · Cited by 93
Effect of dispersion solvent in catalyst ink on proton exchange membrane fuel cell performance
Huang, D.-C., Yu, P.-J., Liu, F.-J., Huang, S.-L., Hsueh, K.-L., Chen, Y.-C., Wu, C.-H., Chang, W.-C., & Tsau, F.-H. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18202-2 · Cited by 93
The model of hydrophobic attraction in the framework of classical DLVO forces
Mishchuk, N. A. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.06.003 · Cited by 92
Interactions Between Colloidal Particles and Soluble Polymers
Ploehn, H. J., & Russel, W. B. (1990) · Advances in chemical engineering · doi:10.1016/s0065-2377(08)60194-5 · Cited by 90
Coating and Drying Defects: Troubleshooting Operating Problems
Gutoff, E. B., Cohen, E. D., & Kheboian, G. I. (2006) · Medical Entomology and Zoology · Cited by 67
Bigg, D. M. (1984) · Journal of Rheology · doi:10.1122/1.549758 · Cited by 66
Surface thermodynamics of polymer solutions
Siow, K. S., & Patterson, D. (1973) · The Journal of Physical Chemistry · doi:10.1021/j100622a012 · Cited by 66
Jung, C., Kim, W.-J., & Yi, S. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.09.013 · Cited by 62
Stampino, P. G., Cristiani, C., Dotelli, G., Omati, L., Zampori, L., Pelosato, R., & Guilizzoni, M. (2009) · Catalysis Today · doi:10.1016/j.cattod.2009.07.023 · Cited by 61
Ionomer Self-Assembly in Dilute Solution Studied by Coarse-Grained Molecular Dynamics
Ghelichi, M., Malek, K., & Eikerling, M. H. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02158 · Cited by 56
Analysis of the Experimental Implications of the Scaling Theory of Polymer Adsorption
Klein, J., & Rossi, G. (1998) · Macromolecules · doi:10.1021/ma9709314 · Cited by 45
Effect of Organic Solvents on Catalyst Layer Structure in Polymer Electrolyte Membrane Fuel Cells
Chisaka, M., & Daiguji, H. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3000592 · Cited by 25
Dynamic surface tension studies of hydroxypropylmethylcellulose film-coating solutions
Machiste, E. O. (1996) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(96)04769-2 · Cited by 25
Defect Detection in Fuel Cell Gas Diffusion Electrodes Using Infrared Thermography
Ulsh, M., Porter, J. M., Bittinat, D. C., & Bender, G. (2016) · Fuel Cells · doi:10.1002/fuce.201500137 · Cited by 23
(2011) · Elsevier eBooks · doi:10.1016/b978-0-12-375182-9.10025-9 · Cited by 19
Swelling agent adopted decal transfer method for membrane electrode assembly fabrication
Cho, D. H., Lee, S. Y., Shin, D. W., Hwang, D. S., & Lee, Y. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.037 · Cited by 15
Durairaj, R., Seman, A., & Ekere, N. N. (2006) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc.2006.280024 · Cited by 8
(1995) · Elsevier eBooks · doi:10.1016/b978-0-7506-0743-8.50002-9 · Cited by 2
Cited by
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“The catalyst coating quality is determined by balancing the stability of the catalyst ink and the coating conditions [205].”
Chen, M., Zhao, C., Sun, F., Fan, J., Li, H., & Wang, H. (2020) · eTransportation · doi:10.1016/j.etran.2020.100075 · Cited by 212
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“In terms of electrostatic stability, stability in water-based inks can generally be described using the classic Derjaguin–Landau–Verwey–Overbeek (DLVO) theory, whereas the stability of non-aqueous inks can be described using a semi-empirical model based on the extended DLVO theory [10, 94, 98].”
BackgroundMethodInfluentialRheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Controlling cracking formation in fuel cell catalyst layers
Kumano, N., Kudo, K., Suda, A., Akimoto, Y., Ishii, M., & Nakamura, H. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.058 · Cited by 135
Metadata
- Authors
- Dixit, M. B., Harkey, B. A., Shen, F., & Hatzell, K. B.
- Affiliations
- Vanderbilt University (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2018
- Volume
- 165
- Issue
- 5
- Pages
- F264-F271
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2793572675
- Cited by
- 126
- References
- 45
- Citations by year
- 2026: 8 · 2025: 24 · 2024: 20 · 2023: 14 · 2022: 11 · 2021: 19 · 2020: 14 · 2019: 11 · 2018: 5
- FWCI
- 4.69
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- Funders
- National Science Foundation (NSF) (1727863)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
- Keywords
- polymer-particle interactions, ink stability, particle aggregation, perfluorosulfonic acid ionomer, carbon particles, roll-to-roll processing, ink aging, rheology, viscosity, surface tension, polymer loading, solvent effects
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.