The DOI matches its Crossref record.
Analysis of Polysulfide Dissolved in Electrolyte in Discharge-Charge Process of Li-S Battery
Open accessAbstract
In this paper, the qualitative and semi-quantitative analysis of polysulfide species dissolved in electrolyte during the discharge-charge process and cycling of Li-S batteries was reported. ICP-OES (Inductively coupled plasma- Optical emission spectrometer) measurement was used to estimate the total sulfur content dissolved in electrolyte. Lithium polysulfide with different order were separated and confirmed by LC-MS (Liquid chromatography coupled with mass spectrometry). Li 2 S 4 and Li 2 S 6 were proved to be the most stable form of lithium polysulfide species. At the end of discharge process, total sulfur content in the form of Li 2 S 4 and Li 2 S 6 remained in electrolyte was about 20% of the active material in initial cathode. At the end of charge process, 45% total sulfur content was preserved in electrolyte mainly in the form of Li 2 S 6 . The partial transformation of active material from liquid phase to solid phase resulted in relatively low practical specific capacity than the theoretical. In cycles, active material transferred between liquid and solid phase kept a balance, and the content of total sulfur, Li 2 S 4 and Li 2 S 6 were changed slightly at the end. Consequently, polysulfide dissolved in electrolyte just took limited responsibility for the capacity fading with cycles of Li-S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Electrolyte solutions design for lithium-sulfur batteries
Liu, Y., Elias, Y., Meng, J., Aurbach, D., Zou, R., Xia, D., & Pang, Q. (2021) · Joule · doi:10.1016/j.joule.2021.06.009 · Cited by 534
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Lei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
A strategic approach to recharging lithium-sulphur batteries for long cycle life
Su, Y.-S., Fu, Y., Cochell, T., & Manthiram, A. (2013) · Nature Communications · doi:10.1038/ncomms3985 · Cited by 449
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Lithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Zhou, F., Li, Z., Luo, X., Wu, T., Jiang, B., Lu, L.-L., Yao, H.-B., Antonietti, M., & Yu, S.-H. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04505 · Cited by 316
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Yan, J., Liu, X., & Li, B. (2016) · Advanced Science · doi:10.1002/advs.201600101 · Cited by 307
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Li‐S Battery Analyzed by UV/Vis in Operando Mode
Patel, M. U. M., Demir‐Cakan, R., Morcrette, M., Tarascon, J., Gaberscek, M., & Dominko, R. (2013) · ChemSusChem · doi:10.1002/cssc.201300142 · Cited by 286
Shuttle phenomenon – The irreversible oxidation mechanism of sulfur active material in Li–S battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.132 · Cited by 285
Self-citationA Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Lithium-Sulfur Battery Technology Readiness and Applications—A Review
Fotouhi, A., Auger, D., O’Neill, L., Cleaver, T., & Walus, S. (2017) · Energies · doi:10.3390/en10121937 · Cited by 180
Metadata
- Authors
- Diao, Y., Xie, K., Xiong, S., & Hong, X.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2012
- Volume
- 159
- Issue
- 4
- Pages
- A421-A425
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2080806221
- Cited by
- 178
- References
- 0
- FWCI
- 10.99
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.