The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Nanomaterial by Sol‐Gel Method: Synthesis and Application
Open accessAbstract
The sol‐gel process is a more chemical method (wet chemical method) for the synthesis of various nanostructures, especially metal oxide nanoparticles. In this method, the molecular precursor (usually metal alkoxide) is dissolved in water or alcohol and converted to gel by heating and stirring by hydrolysis/alcoholysis. Since the gel obtained from the hydrolysis/alcoholysis process is wet or damp, it should be dried using appropriate methods depending on the desired properties and application of the gel. For example, if it is an alcoholic solution, the drying process is done by burning alcohol. After the drying stage, the produced gels are powdered and then calcined. The sol‐gel method is a cost‐effective method and due to the low reaction temperature there is good control over the chemical composition of the products. The sol‐gel method can be used in the process of making ceramics as a molding material and can be used as an intermediate between thin films of metal oxides in various applications. The materials obtained from the sol‐gel method are used in various optical, electronic, energy, surface engineering, biosensors, and pharmaceutical and separation technologies (such as chromatography). The sol‐gel method is a conventional and industrial method for the synthesis of nanoparticles with different chemical composition. The basis of the sol‐gel method is the production of a homogeneous sol from the precursors and its conversion into a gel. The solvent in the gel is then removed from the gel structure and the remaining gel is dried. The properties of the dried gel depend significantly on the drying method. In other words, the “removing solvent method” is selected according to the application in which the gel will be used. Dried gels in various ways are used in industries such as surface coating, building insulation, and the production of special clothing. It is worth mentioning that, by grinding the gel by special mills, it is possible to achieve nanoparticles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hench, L. L., & West, J. K. (1990) · Chemical Reviews · doi:10.1021/cr00099a003 · Cited by 4,450
Tian, N., Zhou, Z.-Y., Sun, S.-G., Ding, Y., & Wang, Z. L. (2007) · Science · doi:10.1126/science.1140484 · Cited by 3,073
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239 · cited 2×
“Carbon aerogels are synthesized in various forms such as monoliths, powders, films, and granules, the properties of which are shown in Figure 15 [76, 83, 160, 161].”
BackgroundA Novel Aluminum–Graphite Dual‐Ion Battery
Zhang, X., Tang, Y., Zhang, F., & Lee, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502588 · Cited by 1,604
Wang, M., Jiang, C., Zhang, S., Song, X., Tang, Y., & Cheng, H.-M. (2018) · Nature Chemistry · doi:10.1038/s41557-018-0045-4 · Cited by 1,594
Mesoporous Titania Spheres with Tunable Chamber Stucture and Enhanced Photocatalytic Activity
Li, H., Bian, Z., Zhu, J., Zhang, D., Li, G., Huo, Y., Li, H., & Lu, Y. (2007) · Journal of the American Chemical Society · doi:10.1021/ja072191c · Cited by 1,170
Phase-pure TiO 2 nanoparticles: anatase, brookite and rutile
Reyes-Coronado, D., Rodríguez-Gattorno, G., Espinosa-Pesqueira, M. E., Cab, C., de Coss, R., & Oskam, G. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/14/145605 · Cited by 1,165
Rahman, I. A., & Padavettan, V. (2012) · Journal of Nanomaterials · doi:10.1155/2012/132424 · Cited by 1,111
Sol–gel based materials for biomedical applications
Owens, G. J., Singh, R. K., Foroutan, F., Alqaysi, M., Han, C.-M., Mahapatra, C., Kim, H.-W., & Knowles, J. C. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.12.001 · Cited by 958
Photocatalytic degradation of organic dyes with manganese-doped ZnO nanoparticles
Ullah, R., & Dutta, J. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.12.033 · Cited by 863
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Cuce, E., Cuce, P. M., Wood, C. J., & Riffat, S. B. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.017 · Cited by 775
Silica Aerogel: Synthesis and Applications
Gurav, J. L., Jung, I.-K., Park, H.-H., Kang, E. S., & Nadargi, D. Y. (2010) · Journal of Nanomaterials · doi:10.1155/2010/409310 · Cited by 756
Sol−Gel Template Synthesis of Semiconductor Nanostructures
Lakshmi, B. B., Dorhout, P. K., & Martin, C. R. (1997) · Chemistry of Materials · doi:10.1021/cm9605577 · Cited by 656
Photocatalytic degradation of organic contaminants in water by ZnO nanoparticles: Revisited
Hariharan, C. (2006) · Applied Catalysis A: General · doi:10.1016/j.apcata.2006.02.020 · Cited by 631
Hrubesh, L. W. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00135-5 · Cited by 572
Structure of Random Porous Materials: Silica Aerogel
Schaefer, D. W., & Keefer, K. D. (1986) · Physical Review Letters · doi:10.1103/physrevlett.56.2199 · Cited by 509
Nano Biosensors: Properties, applications and electrochemical techniques
Huang, X., Zhu, Y., & Kianfar, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.03.048 · Cited by 489
Self-citationZinc oxide films prepared by sol-gel spin-coating
Natsume, Y., & Sakata, H. (2000) · Thin Solid Films · doi:10.1016/s0040-6090(00)01056-7 · Cited by 485
Kianfar, E. (2021) · Journal of Nanobiotechnology · doi:10.1186/s12951-021-00896-3 · Cited by 471
Self-citationPorous Two-Dimensional Materials for Photocatalytic and Electrocatalytic Applications
Wang, H., Liu, X., Niu, P., Wang, S., Shi, J., & Li, L. (2020) · Matter · doi:10.1016/j.matt.2020.04.002 · Cited by 435
Shape‐Dependent Catalytic Activity of Silver Nanoparticles for the Oxidation of Styrene
Xu, R., Wang, D., Zhang, J., & Li, Y. (2006) · Chemistry – An Asian Journal · doi:10.1002/asia.200600260 · Cited by 410
Sol–gel synthesis of monolithic materials with hierarchical porosity
Feinle, A., Elsaesser, M. S., & Hüsing, N. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00710k · Cited by 397
Metal Oxide Nanoparticles in Organic Solvents
Niederberger, M., & Pinna, N. (2009) · Engineering Materials and Processes · doi:10.1007/978-1-84882-671-7 · Cited by 374
Synthesis of Nano-Calcium Oxide from Waste Eggshell by Sol-Gel Method
Habte, L., Shiferaw, N., Mulatu, D., Thenepalli, T., Chilakala, R., & Ahn, J. (2019) · Sustainability · doi:10.3390/su11113196 · Cited by 361
Ji, X., Hou, C., Gao, Y., Xue, Y., Yan, Y., & Guo, X. (2020) · Food & Function · doi:10.1039/c9fo02171j · Cited by 306
Magnetic Nanoparticles in Targeted Drug Delivery: a Review
kianfar, E. (2021) · Journal of Superconductivity and Novel Magnetism · doi:10.1007/s10948-021-05932-9 · Cited by 280
Self-citationBrookite versus anatase TiO2 photocatalysts: phase transformations and photocatalytic activities
Kandiel, T. A., Robben, L., Alkaim, A. F., & Bahnemann, D. W. (2012) · Photochemical & Photobiological Sciences · doi:10.1039/c2pp25217a · Cited by 278
Sol–gel synthesis and characterization of nanocrystalline ZnO powders
Ristić, M., Musić, S., Ivanda, M., & Popović, S. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.01.045 · Cited by 275
Preparation and characterization of nano-TiO2 powder
Li, B., Wang, X., Yan, M., & Li, L. (2003) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(02)00226-2 · Cited by 254
A review on the synthesis of TiO2 nanoparticles by solution route
Gupta, S., & Tripathi, M. (2012) · Open Chemistry · doi:10.2478/s11532-011-0155-y · Cited by 251
Characteristics of silica‐coated TiO 2 and its UV absorption for sunscreen cosmetic applications
Jaroenworaluck, A., Sunsaneeyametha, W., Kosachan, N., & Stevens, R. (2006) · Surface and Interface Analysis · doi:10.1002/sia.2313 · Cited by 234
Verma, R., Gangwar, J., & Srivastava, A. K. (2017) · RSC Advances · doi:10.1039/c7ra06925a · Cited by 219
Sankar ganesh, R., Navaneethan, M., Mani, G. K., Ponnusamy, S., Tsuchiya, K., Muthamizhchelvan, C., Kawasaki, S., & Hayakawa, Y. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.187 · Cited by 216
Scherer, G. W. (1988) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(88)90008-7 · Cited by 214
Advances in carbon nanostructure–silica aerogel composites: a review
Lamy-Mendes, A., Silva, R. F., & Durães, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08959g · Cited by 212
A review of state-of-the-art aerogel applications in buildings
Riffat, S. B., & Qiu, G. (2013) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/cts001 · Cited by 185
A simple template-free sol–gel synthesis of spherical nanosilica from agricultural biomass
Adam, F., Chew, T.-S., & Andas, J. (2011) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-011-2531-7 · Cited by 181
Characterization of acid-base properties of the hydrated oxides on iron and titanium metal surfaces
Simmons, G. W., & Beard, B. C. (1987) · The Journal of Physical Chemistry · doi:10.1021/j100289a025 · Cited by 179
Tizo, M. S., Blanco, L. A. V., Cagas, A. C. Q., Dela Cruz, B. R. B., Encoy, J. C., Gunting, J. V., Arazo, R. O., & Mabayo, V. I. F. (2018) · Sustainable Environment Research · doi:10.1016/j.serj.2018.09.002 · Cited by 175
Nanocrystalline zinc oxide for the decontamination of sarin
Mahato, T. H., Prasad, G. K., Singh, B., Acharya, J., Srivastava, A. R., & Vijayaraghavan, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.126 · Cited by 170
Catauro, M., Tranquillo, E., Poggetto, G. D., et al. (2018) · Materials · doi:10.3390/ma11122364 · Cited by 149
Kuyumcu, Ö. K., Kibar, M., Dayıoğlu, K., Gedik, F., Akın, A. N., & Özkara-Aydınoğlu, Ş. (2015) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2015.05.037 · Cited by 147
A review of gas sensors based on carbon nanomaterial
Raya, I., Kzar, H. H., Mahmoud, Z. H., Ahmed, A. A. A., Ibatova, A. Z., & Kianfar, E. (2021) · Carbon letters · doi:10.1007/s42823-021-00276-9 · Cited by 137
Self-citationRao, A. V., & Haranath, D. (1999) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(99)00037-2 · Cited by 135
A review on aerogel: 3D nanoporous structured fillers in polymer‐based nanocomposites
Salimian, S., Zadhoush, A., Naeimirad, M., Kotek, R., & Ramakrishna, S. (2017) · Polymer Composites · doi:10.1002/pc.24412 · Cited by 134
Structural, optoelectronic, luminescence and thermal properties of Ga-doped zinc oxide thin films
Shinde, S. S., Shinde, P. S., Oh, Y. W., Haranath, D., Bhosale, C. H., & Rajpure, K. Y. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.06.058 · Cited by 130
Synergistic effects of silica aerogels/xerogels on properties of polymer composites: A review
Kaya, G. G., & Deveci, H. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.05.019 · Cited by 128
The sol–gel template synthesis of porous TiO2for a high performance humidity sensor
Wang, Z., Shi, L., Wu, F., Yuan, S., Zhao, Y. H., & Zhang, M. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/27/275502 · Cited by 118
Temperature-dependent phase transformation of TiO2 nanoparticles synthesized by sol-gel method
Dubey, R. S. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.12.120 · Cited by 117
Optoelectronic properties of sprayed transparent and conducting indium doped zinc oxide thin films
Shinde, S. S., Shinde, P. S., Bhosale, C. H., & Rajpure, K. Y. (2008) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/41/10/105109 · Cited by 112
Chen, R., Cheng, Y., Wang, P., Wang, Y., Wang, Q., Yang, Z., Tang, C., Xiang, S., Luo, S., Huang, S., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129682 · Cited by 100
Singh, I., & Birajdar, B. (2017) · RSC Advances · doi:10.1039/c7ra10108b · Cited by 98
Sarkar, D., Ghosh, C. K., & Chattopadhyay, K. K. (2012) · CrystEngComm · doi:10.1039/c2ce06392a · Cited by 83
Preparation and studies of photocatalytic silver-loaded TiO2 films by hybrid sol–gel method
Hou, X.-G., Huang, M.-D., Wu, X., & Liu, A.-D. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.05.041 · Cited by 82
Growth of Zinc Oxide Nanowires and Nanobelts for Gas Sensing Applications
Hossain, M. K., Ghosh, S., Boontongkong, Y., Thanachayanont, C., & Dutta, J. (2005) · Journal of Metastable and Nanocrystalline Materials · doi:10.4028/www.scientific.net/jmnm.23.27 · Cited by 81
Kianfar, E., Salimi, M., Kianfar, F., Kianfar, M., & Razavikia, S. A. H. (2018) · Macromolecular Research · doi:10.1007/s13233-019-7009-4 · Cited by 74
Self-citationWen Jei, Y. A. N. G., Liu, J., Wang, Y., & Gao, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.109583 · Cited by 72
Khan, M. D., Ahn, J. W., & Nam, G. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.011 · Cited by 70
Synthesis of zinc oxide nanotubes within ultrathin anodic aluminum oxide membrane by sol–gel method
Yue, S., Yan, Z., Shi, Y., et al. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.02.037 · Cited by 55
Mahlambi, M. M., Mishra, A. K., Mishra, S. B., Krause, R. W. M., Mamba, B. B., & Raichur, A. M. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1852-7 · Cited by 50
Verma, R. K., Awasthi, A., Singh, P., Srivastava, R., Sheng, H., Wen, J., Miller, D. J., & Srivastava, A. K. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.04.038 · Cited by 50
Study on food preservation materials based on nano-particle reagents
Hutapea, S., Al‐Shawi, S. G., Chen, T.-C., You, X., Bokov, D. O., Abdelbasset, W. K., & Suksatan, W. (2021) · Food Science and Technology · doi:10.1590/fst.39721 · Cited by 46
Self-citationNanoporous of waste avian eggshell to reduce heavy metal and acidity in water
Setiawan, B. D., Rizqi, O., Brilianti, N. F., & Wasito, H. (2018) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2018.10.002 · Cited by 32
Semiconductor nanocrystals in sol–gel derived matrices
Liao, Y.-L., Xu, Y., & Chan, Y. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51351c · Cited by 26
Shalaby, M. N., Saad, M. A., Akar, S., Reda, M. A. A., & Shalgham, A. I. (2012) · Journal of Human Kinetics · doi:10.2478/v10078-012-0080-y · Cited by 26
Atomic structure, work function and magnetism in layered single crystal VOCl
Wang, W., Sun, R., He, S., Jia, Z., Su, C., Li, Y., & Wang, Z. (2020) · 2D Materials · doi:10.1088/2053-1583/abc5cf · Cited by 26
Controlling micro-porous size in TiO2 pellets processed by sol-gel and rapid liquid phase sintering
Valdespino-Padilla, D., Rojas-George, G., Muñoz‐Saldaña, J., Moreno-Murguía, B., & Cruz-Jáuregui, M. P. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.154 · Cited by 3
Cited by
Nanomaterials: An overview of synthesis, classification, characterization, and applications
Mekuye, B., & Abera, B. (2023) · Nano Select · doi:10.1002/nano.202300038 · Cited by 751
Khan, Y., Sadia, H., Ali Shah, S. Z., Khan, M. N., Shah, A. A., Ullah, N., Ullah, M. F., Bibi, H., Bafakeeh, O. T., Khedher, N. B., et al. (2022) · Catalysts · doi:10.3390/catal12111386 · Cited by 664
Chen, M., Kitiphatpiboon, N., Feng, C., Abudula, A., Ma, Y., & Guan, G. (2023) · eScience · doi:10.1016/j.esci.2023.100111 · Cited by 381
Rezaei, B., Yari, P., Sanders, S. M., Wang, H., Chugh, V. K., Liang, S., Mostufa, S., Xu, K., Wang, J., Gómez‐Pastora, J., et al. (2024) · Small · doi:10.1002/smll.202304848 · Cited by 366
Titanium Dioxide as the Most Used Photocatalyst for Water Purification: An Overview
Armaković, S. J., Savanović, M. M., & Armaković, S. (2022) · Catalysts · doi:10.3390/catal13010026 · Cited by 324
Metadata
- Authors
- Bokov, D., Turki Jalil, A., Chupradit, S., Suksatan, W., Javed Ansari, M., Shewael, I. H., Valiev, G. H., & Kianfar, E.
- Venue
- Advances in Materials Science and Engineering
- Publisher
- Wiley
- Published
- 2021-01
- Volume
- 2021
- Issue
- 1
- ISSN
- 1687-8434 (ISSN-L)
- 1687-8442
- OpenAlex
- W4200470043
- Cited by
- 1,460
- References
- 67
- FWCI
- 50.48
- Type
- journal article
- Language
- en
- Status
- Retracted
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.