CoChat

Extraction of Cellulose from Sugarcane Bagasse Optimization and Characterization

Open access
Melesse, Getu T., Hone, Fekadu G., Mekonnen, Mulualem A. · 2022 · Advances in Materials Science and Engineering

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.

Abstract

In this study, cellulose was extracted from sugarcane bagasse (SCB) through a convenient five-step treatment, and procedures were performed. During the alkaline curing process of the extraction of cellulose, NaOH has a concentration of (0.5, 1.5, 2.75, and 4%) and the extraction time (15, 30, and 45 min) at a constant temperature of 120°C were taken as variables and perfectly optimized by response surface methodology (RSM) for cellulose with the highest product. The optimum conditions were found to be 2.75% NaOH, 120°C, and 45 min with a cellulose yield of 73.71 ± 0.67% cellulose, 17.22 ± 0.82% hemicellulose, and 9.07 ± 0.95% lignin. Though most of the lignin was eliminated during the alkaline and dilute acid pretreatment process, the remaining lignin was removed by a solution treatment of 4% NaOH, and 21.92% H2O2 at 121°C for 44.97 min where the cellulose yield was found as 89.75 ± 0.64%, hemicellulose was 6.15 ± 0.83%, and lignin was 2.65 ± 0.66%. Morphological analysis revealed that the average diameter of the cellulose was 12.06 µm. Thermal and XRD diffraction analysis showed that the cellulose is thermally stable and has a crystallinity index of 31.63%. FTIR spectra demonstrate that cellulose was successfully extracted due to the removal of noncellulose components.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1155/2022/1712207

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Chemical structure of hemicellulose [13].
Figure 1 Chemical structure of hemicellulose [13].CC-BY · From the PDF
Figure 2 Structure of the main subunits of lignin precursors [14].
Figure 2 Structure of the main subunits of lignin precursors [14].CC-BY · From the PDF
Figure 3 Chemical structure of cellulose molecule [14].
Figure 3 Chemical structure of cellulose molecule [14].CC-BY · From the PDF
Figure 4 XRD pattern of extracted cellulose for (A) untreated, (B) dewaxing, (C) alkali, (D) dilute acidic, (E1) first bleaching, and (E2) second bleaching-treated sugarcane bagasse.
Figure 4 XRD pattern of extracted cellulose for (A) untreated, (B) dewaxing, (C) alkali, (D) dilute acidic, (E1) first bleaching, and (E2) second bleaching-treated sugarcane bagasse.CC-BY · From the PDF
Figure 5 SEM micrographs of cellulose extracted from sugarcane bagasse.
Figure 5 SEM micrographs of cellulose extracted from sugarcane bagasse.CC-BY · From the PDF
Figure 6 Average diameter of cellulose extracted from sugarcane bagasse.
Figure 6 Average diameter of cellulose extracted from sugarcane bagasse.CC-BY · From the PDF
Figure 7 (a, b) FTIR spectra of the extraction of cellulose from sugarcane bagasse.
Figure 7 (a, b) FTIR spectra of the extraction of cellulose from sugarcane bagasse.CC-BY · From the PDF
Figure 8 (a) (e thermogravimetric analysis and (b) the differential thermal analysis curves of cellulose extracted from the different methods.
Figure 8 (a) (e thermogravimetric analysis and (b) the differential thermal analysis curves of cellulose extracted from the different methods.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 1

  1. J. A. R. Rodrigues, 2011, From the mill to a biorefinery: the sugar factory as an industrial enterprise for the generation of biochemicals and biofuels, Química Nova, 34, 1242

Cited by

See all 120

Metadata

Authors
Melesse, G. T., Hone, F. G., & Mekonnen, M. A.
Affiliations
  • Jimma University (ET)
  • Addis Ababa University (ET)
Corresponding author
Mekonnen, Mulualem A.
Venue
Advances in Materials Science and Engineering
Publisher
Wiley
Published
2022-10-10
Volume
2022
Pages
1-10
ISSN
  • 1687-8434 (ISSN-L)
  • 1687-8442
OpenAlex
W4304114024
Cited by
99
References
53
Citations by year
2026: 30 · 2025: 35 · 2024: 23 · 2023: 11
FWCI
4.32
Type
journal article
Language
en
Open access
Locations
  • Advances in Materials Science and Engineering (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Jimma Institute of Technology
Topics
  • Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
  • Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
  • Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
Keywords
cellulose extraction, sugarcane bagasse, alkaline pretreatment, NaOH concentration, dilute acid pretreatment, hydrogen peroxide bleaching, lignin removal, hemicellulose, crystallinity index, cellulose yield, agricultural waste valorization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.