3D-Printed Extracellular Matrix/Polyethylene Glycol Diacrylate Hydrogel Incorporating the Anti-inflammatory Phytomolecule Honokiol for Regeneration of Osteochondral Defects
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Background: Osteoarthritis is the leading cause of disability worldwide; cartilage degeneration and defects are the central features. Significant progress in tissue engineering holds promise to regenerate damaged cartilage tissue. However, a formidable challenge is to develop a 3-dimensional (3D) tissue construct that can regulate local immune environment to facilitate the intrinsic osteochondral regeneration. Purpose: To evaluate efficacy of a 3D-printed decellularized cartilage extracellular matrix (ECM) and polyethylene glycol diacrylate (PEGDA) integrated novel scaffold (PEGDA/ECM) together with the natural compound honokiol (Hon) for regenerating osteochondral defect. Study Design: Controlled laboratory study. Methods: We used a stereolithography-based 3D printer for PEGDA/ECM bioprinting. A total of 36 Sprague-Dawley rats with cylindrical osteochondral defect in the trochlear groove of the femur were randomly assigned into 3 different treatments: no scaffold implantation (Defect group), 3D printed PEGDA/ECM scaffold alone (PEGDA/ECM group), or Hon suspended in a 3D-printed PEGDA/ECM scaffold (PEGDA/ECM/Hon group). 12 rats that underwent only medial parapatellar incision surgery were used as normal controls. The femur specimens were postoperatively harvested at 4 and 8 weeks for gross, micro-CT, and histological evaluations. The efficacy of PEGDA/ECM/Hon scaffold on the release of proinflammatory cytokines from the macrophages stimulated by lipopolysaccharide (LPS) was evaluated in-vitro. Results: In vitro results determined that PEGDA/ECM/Hon scaffold could suppress the release of proinflammatory cytokines from macrophages that were stimulated by LPS. Macroscopic images showed that the PEGDA/ECM/Hon group had significantly higher ICRS scoring than that of defect and PEGDA/ECM groups. Micro-CT evaluation demonstrated that much more bony tissue was formed in the defect sites implanted with the PEGDA/ECM scaffold or PEGDA/ECM/Hon scaffold compared with the untreated defects. Histological analysis showed that the PEGDA/ECM/Hon group had a significant enhancement in osteochondral regeneration at 4 and 8 weeks after surgery in comparison with the ECM/PEGDA or defect group. Conclusion: This study demonstrated that 3D printing of PEGDA/ECM hydrogel incorporating the anti-inflammatory phytomolecule honokiol could provide a promising scaffold for osteochondral defect repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vos, T., Flaxman, A. D., Naghavi, M., Lozano, R., Michaud, C., Ezzati, M., Shibuya, K., Salomon, J. A., Abdalla, S., Aboyans, V., et al. (2012) · The Lancet · doi:10.1016/s0140-6736(12)61729-2 · Cited by 8,291
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · cited 1×
“In particular, ECM-based bioink has recently been developed to fabricate functional biomoleculecontaining scaffolds.(14,31,32) In this study, we combined the advantage of both ECM and photocrosslinked PEG hydrogels (PEGDA) to fabricate an osteochondral construct that could quickly solidify after exposure to visible li…”
MethodOrgan printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis
Sung, H.-J., Meredith, C., Johnson, C., & Galis, Z. S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.066 · Cited by 804 · cited 1×
“For example, the degradation product of poly D,L-lactic acid and/or poly D,L-lactic-co-glycolic acid induces the migration of inflammatory cells into the surrounding area of the polymers.(44) Even the same polymer with different weight exerts different inflammatory response Figure 8.”
BackgroundFedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467 · cited 1×
“A 3D printing device is used to deposit ‘‘bioink’’ (scaffold materials) layer by layer into a predesigned 3D structure.(6) Efficient bioprinting so far has been limited by a paucity of bioink (biomaterials) that is suitable for cell survival and at the same time compatible with mainstream bioprinters.”
MethodMao, Y., Block, T., Singh-Varma, A., Sheldrake, A., Leeth, R., Griffey, S., & Kohn, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.006 · Cited by 63
Zhong, X., & Liu, H. (2018) · Journal of Gastroenterology and Hepatology · doi:10.1111/jgh.13853 · Cited by 60
Cited by
The immune microenvironment in cartilage injury and repair
Li, M., Yin, H., Yan, Z., Li, H., Wu, J., Wang, Y., Wei, F., Tian, G., Ning, C., Li, H., et al. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.12.006 · Cited by 403
Self-citationFabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Brown, M., Li, J., Moraes, C., Tabrizian, M., & Li-Jessen, N. Y. K. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121786 · Cited by 282
Decellularization for the retention of tissue niches
Moffat, D., Ye, K., & Jin, S. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314221101151 · Cited by 152
Hakim Khalili, M., Zhang, R., Wilson, S., Goel, S., Impey, S. A., & Aria, A. I. (2023) · Polymers · doi:10.3390/polym15102341 · Cited by 114
Metadata
- Authors
- Zhu, S., Chen, P., Chen, Y., Li, M., Chen, C., & Lu, H.
- Venue
- The American Journal of Sports Medicine
- Publisher
- SAGE Publications
- Published
- 2020-08-07
- Volume
- 48
- Issue
- 11
- Pages
- 2808-2818
- ISSN
- 0363-5465 (ISSN-L)
- 1552-3365
- OpenAlex
- W3047753107
- Cited by
- 100
- References
- 7
- FWCI
- 12.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-Printed Extracellular Matrix/Polyethylene Glycol Diacrylate Hydrogel Incorporating the Anti-inflammatory Phytomolecule Honokiol for Regeneration of Osteochondral Defects. https://app.cochat.ai/papers/10.1177/0363546520941842
- The paper
- Zhu, S., Chen, P., Chen, Y., Li, M., Chen, C., & Lu, H. (2020). 3D-Printed Extracellular Matrix/Polyethylene Glycol Diacrylate Hydrogel Incorporating the Anti-inflammatory Phytomolecule Honokiol for Regeneration of Osteochondral Defects. The American Journal of Sports Medicine. https://doi.org/10.1177/0363546520941842
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.