QMEANclust: estimation of protein model quality by combining a composite scoring function with structural density information
Open accessThe DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Abstract
BACKGROUND: The selection of the most accurate protein model from a set of alternatives is a crucial step in protein structure prediction both in template-based and ab initio approaches. Scoring functions have been developed which can either return a quality estimate for a single model or derive a score from the information contained in the ensemble of models for a given sequence. Local structural features occurring more frequently in the ensemble have a greater probability of being correct. Within the context of the CASP experiment, these so called consensus methods have been shown to perform considerably better in selecting good candidate models, but tend to fail if the best models are far from the dominant structural cluster. In this paper we show that model selection can be improved if both approaches are combined by pre-filtering the models used during the calculation of the structural consensus. RESULTS: Our recently published QMEAN composite scoring function has been improved by including an all-atom interaction potential term. The preliminary model ranking based on the new QMEAN score is used to select a subset of reliable models against which the structural consensus score is calculated. This scoring function called QMEANclust achieves a correlation coefficient of predicted quality score and GDT_TS of 0.9 averaged over the 98 CASP7 targets and perform significantly better in selecting good models from the ensemble of server models than any other groups participating in the quality estimation category of CASP7. Both scoring functions are also benchmarked on the MOULDER test set consisting of 20 target proteins each with 300 alternatives models generated by MODELLER. QMEAN outperforms all other tested scoring functions operating on individual models, while the consensus method QMEANclust only works properly on decoy sets containing a certain fraction of near-native conformations. We also present a local version of QMEAN for the per-residue estimation of model quality (QMEANlocal) and compare it to a new local consensus-based approach. CONCLUSION: Improved model selection is obtained by using a composite scoring function operating on single models in order to enrich higher quality models which are subsequently used to calculate the structural consensus. The performance of consensus-based methods such as QMEANclust highly depends on the composition and quality of the model ensemble to be analysed. Therefore, performance estimates for consensus methods based on large meta-datasets (e.g. CASP) might overrate their applicability in more realistic modelling situations with smaller sets of models based on individual methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
PROCHECK: a program to check the stereochemical quality of protein structures
Laskowski, R. A., MacArthur, M. W., Moss, D. S., & Thornton, J. M. (1993) · Journal of Applied Crystallography · doi:10.1107/s0021889892009944 · Cited by 24,581 · cited 1×
“The second category includes methods taking into account evolutionary information [16- 18], stereochemical plausibility of the models [ 19 ,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physicsbased energy functions [22,23] and knowledge-based statistical po…”
Proceedings of the National Academy of Sciences of the United States of America
Dowling, J. E., & Wald, G. (2009) · Nutrition Reviews · doi:10.1111/j.1753-4887.1981.tb06752.x · Cited by 17,893
Kabsch, W., & Sander, C. (1983) · Biopolymers · doi:10.1002/bip.360221211 · Cited by 15,320 · cited 1×
“Two trivial features are also used: the average solvent accessibility (weighted by triangular smoothing) and the fraction residues in the 9-residue window with no assigned secondary structure by DSSP [62].”
R: A Language for Data Analysis and Graphics
Ihaka, R., & Gentleman, R. (1996) · Journal of Computational and Graphical Statistics · doi:10.1080/10618600.1996.10474713 · Cited by 11,220 · cited 1×
“Optimisation of the weighting factors for the QMEAN composite scoring was performed on the CASP6 training set by using the linear regression module of the R package [61] with the GDT_TS score as target function.”
Assessment of protein models with three-dimensional profiles
Lüthy, R., Bowie, J. U., & Eisenberg, D. (1992) · Nature · doi:10.1038/356083a0 · Cited by 3,525 · cited 2×
“…taking into account evolutionary information [16-18], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physics-based energy functions [22,23] and knowledge-based statistical potentials [24-29].”
ROCR: visualizing classifier performance in R
Sing, T., Sander, O., Beerenwinkel, N., & Lengauer, T. (2005) · Bioinformatics · doi:10.1093/bioinformatics/bti623 · Cited by 3,200 · cited 1×
“The ROC curve analysis has been performed on all residues of all CASP7 server models using the R-package ROCR [63].”
The relation between the divergence of sequence and structure in proteins.
Chothia, C., & Lesk, A. M. (1986) · The EMBO Journal · doi:10.1002/j.1460-2075.1986.tb04288.x · Cited by 2,458 · cited 1×
“Most current scoring functions ignore a trivial parameter for the estimation of model quality: the presence and closeness of a structural template which can be used to build the model [55].”
Scoring function for automated assessment of protein structure template quality
Zhang, Y., & Skolnick, J. (2004) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.20264 · Cited by 2,392 · cited 3×
“In the local consensus approach the C α deviations among the equivalent positions in the models after a sequence-dependent superposition with the program TMscore [52] are analysed in order to derive a quality score.”
Statistical potential for assessment and prediction of protein structures
Shen, M., & Sali, A. (2006) · Protein Science · doi:10.1110/ps.062416606 · Cited by 2,307 · cited 1×
“The second category includes methods taking into account evolutionary information [1618], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physicsbased energy functions [22,23] and knowledge-based statistical potent…”
Hooft, R. W. W., Vriend, G., Sander, C., & Abola, E. E. (1996) · Nature · doi:10.1038/381272a0 · Cited by 2,173 · cited 1×
“The second category includes meth-ods taking into account evolutionary information [16-18], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physics-based energy functions [22,23] and…”
Recognition of errors in three‐dimensional structures of proteins
Sippl, M. J. (1993) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.340170404 · Cited by 2,142 · cited 1×
“The SVM approach, as well as ProQres, have been shown to outperform classical scoring functions such as Verify3D [21] and ProsaII [58].”
Protein Structure Prediction and Structural Genomics
Baker, D., & Sali, A. (2001) · Science · doi:10.1126/science.1065659 · Cited by 1,587 · cited 1×
“On the other hand, the estimation of the absolute quality of a model is of tremendous importance for the biological community since it is the quality of the model which dictates its biological applicability ( e.g . for mutagenesis studies, virtual screening and molecular replacement) [36-38].”
Enhanced genome annotation using structural profiles in the program 3D-PSSM 1 1Edited by J. Thornton
Kelley, L. A., MacCallum, R. M., & Sternberg, M. J. E. (2000) · Journal of Molecular Biology · doi:10.1006/jmbi.2000.3741 · Cited by 1,468 · cited 1×
“However, in recent years there has been a clear trend in the field to generate a variety of models based on different template structures (or combinations thereof) and/or alternative alignments and to select the best candidate based on the estimated quality of the resulting models [3-10].”
Journal of Computational and Graphical Statistics
Levine, R. A., Sampson, E., & Lee, T. C. M. (2014) · WIREs Computational Statistics · doi:10.1002/wics.1307 · Cited by 1,424
Simons, K. T., Kooperberg, C., Huang, E., & Baker, D. (1997) · Journal of Molecular Biology · doi:10.1006/jmbi.1997.0959 · Cited by 1,396 · cited 1×
“In the conformational sampling step of ab initio structure prediction methods it is common practice to generate a vast number of models and to subsequently select the best candidates based on an energy function [1,2].”
A new approach to protein fold recognition
Jones, D. T., Taylort, W. R., & Thornton, J. M. (1992) · Nature · doi:10.1038/358086a0 · Cited by 1,221 · cited 1×
“However, in recent years there has been a clear trend in the field to generate a variety of models based on different template structures (or combinations thereof) and/or alternative alignments and to select the best candidate based on the estimated quality of the resulting models [3-10].”
Calculation of conformational ensembles from potentials of mena force
Sippl, M. J. (1990) · Journal of Molecular Biology · doi:10.1016/s0022-2836(05)80269-4 · Cited by 1,070 · cited 1×
“The second category includes methods taking into account evolutionary information [1618], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physicsbased energy functions [22,23] and knowledge-based statistical potent…”
LGA: a method for finding 3D similarities in protein structures
Zemla, A. (2003) · Nucleic Acids Research · doi:10.1093/nar/gkg571 · Cited by 1,069 · cited 2×
“In this work, the GDT_TS score [46], a well established similarity measure in the CASP assessment, is used.”
QMEAN: A comprehensive scoring function for model quality assessment
Benkert, P., Tosatto, S. C. E., & Schomburg, D. (2008) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.21715 · Cited by 1,022 · cited 6×
“We recently described the QMEAN composite scoring function consisting of a linear combination of five terms including 3 statistical potentials [33].”
InfluentialSelf-citationProteins: Structure, Function, and Bioinformatics
(2006) · Proteins Structure Function and Bioinformatics · doi:10.1002/(issn)1097-0134 · Cited by 943
Zhou, H., & Zhou, Y. (2002) · Protein Science · doi:10.1110/ps.0217002 · Cited by 902 · cited 1×
“…taking into account evolutionary information [16-18], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physics-based energy functions [22,23] and knowledge-based statistical potentials [24-29].”
QMEAN server for protein model quality estimation
Benkert, P., Künzli, M., & Schwede, T. (2009) · Nucleic Acids Research · doi:10.1093/nar/gkp322 · Cited by 873 · cited 1×
“The two scoring functions QMEAN and QMEANclust are publicly available as part of the QMEAN server [60] under the following address: http://swissmodel.expasy.org/ qmean.”
Self-citationComparative protein modeling by satisfaction of spatial restraints
⩽ali, A. (1995) · Molecular Medicine Today · doi:10.1016/s1357-4310(95)91170-7 · Cited by 782 · cited 1×
“The MOULDER test set consists of 20 different targets, each with 300 alternative models generated by MODELLER [57].”
3D-Jury: a simple approach to improve protein structure predictions
Ginalski, K., Elofsson, A., Fischer, D., & Rychlewski, L. (2003) · Bioinformatics · doi:10.1093/bioinformatics/btg124 · Cited by 719 · cited 3×
“MaxSub [50] in 3Djury [11], LGscore [51] in Pcons [12] and TMscore [52] in the consensus method described in MODfold [53].”
Can correct protein models be identified?
Wallner, B., & Elofsson, A. (2003) · Protein Science · doi:10.1110/ps.0236803 · Cited by 710 · cited 1×
“Composite scoring functions analysing multiple structural features have been introduced and shown to perform better than any single term [30-35].”
Ab initio modeling of small proteins by iterative TASSER simulations
Wu, S., Skolnick, J., & Zhang, Y. (2007) · BMC Biology · doi:10.1186/1741-7007-5-17 · Cited by 514
Assessing protein structures with a non-local atomic interaction energy
Melo, F., & Feytmans, E. (1998) · Journal of Molecular Biology · doi:10.1006/jmbi.1998.1665 · Cited by 501 · cited 1×
“The second category includes methods taking into account evolutionary information [1618], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physicsbased energy functions [22,23] and knowledge-based statistical potent…”
Samudrala, R., & Moult, J. (1998) · Journal of Molecular Biology · doi:10.1006/jmbi.1997.1479 · Cited by 440 · cited 1×
“generated a decoy-dependent implementation of the RAPDF interaction potential [56] by deriving the distance frequencies from the models in the decoy set and weighting each count according to the RAPDF score of the model.”
MaxSub: an automated measure for the assessment of protein structure prediction quality
Siew, N., Elofsson, A., Rychlewski, L., & Fischer, D. (2000) · Bioinformatics · doi:10.1093/bioinformatics/16.9.776 · Cited by 401 · cited 1×
“MaxSub [50] in 3Djury [11], LGscore [51] in Pcons [12] and TMscore [52] in the consensus method described in MODfold [53].”
Xiang, Z., Soto, C. S., & Honig, B. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.102179699 · Cited by 367 · cited 1×
“The basic idea of consensus-based methods is that conformations predicted more frequently are more likely to be correct than structural patterns occurring in only a few models [11-15].”
Statistical potentials for fold assessment
Melo, F., Sánchez, R., & Sali, A. (2002) · Protein Science · doi:10.1002/pro.110430 · Cited by 346 · cited 1×
“The second category includes methods taking into account evolutionary information [1618], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physicsbased energy functions [22,23] and knowledge-based statistical potent…”
Critical assessment of methods of protein structure prediction—Round VII
Moult, J., Fidelis, K., Kryshtafovych, A., Rost, B., Hubbard, T., & Tramontano, A. (2007) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.21767 · Cited by 324 · cited 1×
“for the first time in a community-wide experiment in 2004 as part of Critical Assessment of Fully Automated Structure Prediction (CAFASP) [40] and most recently at CASP7 [41,42].”
Comparative protein structure modeling by iterative alignment, model building and model assessment
John, B. (2003) · Nucleic Acids Research · doi:10.1093/nar/gkg460 · Cited by 316 · cited 1×
“For each modelling case a total number of 300 alternative models were generated using MOULDER [7].”
High-resolution structure prediction and the crystallographic phase problem
Qian, B., Raman, S., Das, R., Bradley, P., McCoy, A. J., Read, R. J., & Baker, D. (2007) · Nature · doi:10.1038/nature06249 · Cited by 316
Petrey, D., Xiang, Z., Tang, C. L., Xie, L., Gimpelev, M., Mitros, T., Soto, C. S., Goldsmith-Fischman, S., Kernytsky, A., Schlessinger, A., et al. (2003) · Proteins: Structure, Function, and Genetics · doi:10.1002/prot.10550 · Cited by 311
Utility of homology models in the drug discovery process
Hillisch, A., Pineda, L. F., & Hilgenfeld, R. (2004) · Drug Discovery Today · doi:10.1016/s1359-6446(04)03196-4 · Cited by 310 · cited 1×
“On the other hand, the estimation of the absolute quality of a model is of tremendous importance for the biological community since it is the quality of the model which dictates its biological applicability ( e.g . for mutagenesis studies, virtual screening and molecular replacement) [36-38].”
Pcons: A neural‐network–based consensus predictor that improves fold recognition
Lundström, J., Rychlewski, L., Bujnicki, J., & Elofsson, A. (2001) · Protein Science · doi:10.1110/ps.08501 · Cited by 305 · cited 5×
“Figure 1 underlines that QMEAN-clust and the single model scoring function QMEAN show a statistically better (p = 1.9*10 -5 and p = 0.009, respectively) selection performance than Pcons, the best performing clustering based method at CASP7.”
InfluentialClustering of low-energy conformations near the native structures of small proteins
Shortle, D., Simons, K. T., & Baker, D. (1998) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.95.19.11158 · Cited by 296 · cited 1×
“The basic idea of consensus-based methods is that conformations predicted more frequently are more likely to be correct than structural patterns occurring in only a few models [11-15].”
A distance‐dependent atomic knowledge‐based potential for improved protein structure selection
Lu, H., & Skolnick, J. (2001) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.1087 · Cited by 290 · cited 1×
“…taking into account evolutionary information [16-18], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physics-based energy functions [22,23] and knowledge-based statistical potentials [24-29].”
Lazaridis, T., & Karplus, M. (1999) · Journal of Molecular Biology · doi:10.1006/jmbi.1999.2685 · Cited by 266
A study of quality measures for protein threading models
Cristobal, S., Zemla, A., Fischer, D., Rychlewski, L., & Elofsson, A. (2001) · BMC Bioinformatics · doi:10.1186/1471-2105-2-5 · Cited by 211 · cited 1×
“MaxSub [50] in 3Djury [11], LGscore [51] in Pcons [12] and TMscore [52] in the consensus method described in MODfold [53].”
Wallner, B., & Elofsson, A. (2006) · Protein Science · doi:10.1110/ps.051799606 · Cited by 190 · cited 3×
“In ProQres a neural network is used to combine several local descriptors [17].”
TASSER: An automated method for the prediction of protein tertiary structures in CASP6
Zhang, Y., Arakaki, A. K., & Skolnick, J. (2005) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.20724 · Cited by 184 · cited 1×
“In the conformational sampling step of ab initio structure prediction methods it is common practice to generate a vast number of models and to subsequently select the best candidates based on an energy function [1,2].”
A composite score for predicting errors in protein structure models
Eramian, D., Shen, M., Devos, D., Melo, F., Sali, A., & Marti‐Renom, M. A. (2006) · Protein Science · doi:10.1110/ps.062095806 · Cited by 166 · cited 2×
“[32] in order to test QMEAN under a more realistic modelling situation.”
How well can the accuracy of comparative protein structure models be predicted?
Eramian, D., Eswar, N., Shen, M., & Sali, A. (2008) · Protein Science · doi:10.1110/ps.036061.108 · Cited by 144 · cited 1×
“Therefore, training weighting factors specifically for proteins of similar size and amino acid or secondary structure composition may improve the performance, especially in the prediction of absolute values of model quality [49].”
M4T: a comparative protein structure modeling server
Fernández‐Fuentes, N., Madrid-Aliste, C. J., Rai, B. K., Fajardo, J. E., & Fiser, A. (2007) · Nucleic Acids Research · doi:10.1093/nar/gkm341 · Cited by 143 · cited 1×
“However, in recent years there has been a clear trend in the field to generate a variety of models based on different template structures (or combinations thereof) and/or alternative alignments and to select the best candidate based on the estimated quality of the resulting models [3-10].”
Assessment of predictions in the model quality assessment category
Cozzetto, D., Kryshtafovych, A., Ceriani, M., & Tramontano, A. (2007) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.21669 · Cited by 122
Automated server predictions in CASP7
Battey, J. N. D., Kopp, J., Bordoli, L., Read, R. J., Clarke, N. D., & Schwede, T. (2007) · Proteins: Structure, Function, and Bioinformatics · doi:10.1002/prot.21761 · Cited by 114 · cited 3×
“a scoring function that always selects the models of the Zhang server [43,47].”
Self-citationPrediction of global and local model quality in CASP7 using Pcons and ProQ
Wallner, B., & Elofsson, A. (2007) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21774 · Cited by 111 · cited 3×
“At CASP7, none of the quality assessment programs (clustering and non-clustering methods) was able to select better models out of the ensemble of server models than the Zhang server [54] submitted for each target [35,41,44].”
Identifying native‐like protein structures using physics‐based potentials
Dominy, B. N., & Charles L. Brooks (2001) · Journal of Computational Chemistry · doi:10.1002/jcc.10018 · Cited by 107 · cited 1×
“The second category includes methods taking into account evolutionary information [1618], stereochemical plausibility of the models [19,20] and the environment compatibility of their residues [21] as well as energy-based methods which include physicsbased energy functions [22,23] and knowledge-based statistical potent…”
The Victor/FRST Function for Model Quality Estimation
Tosatto, S. C. E. (2005) · Journal of Computational Biology · doi:10.1089/cmb.2005.12.1316 · Cited by 101 · cited 1×
“Composite scoring functions analysing multiple structural features have been introduced and shown to perform better than any single term [ 30-35 ].”
Self-citationA multi-template combination algorithm for protein comparative modeling
Cheng, J. (2008) · BMC Structural Biology · doi:10.1186/1472-6807-8-18 · Cited by 95 · cited 1×
“However, in recent years there has been a clear trend in the field to generate a variety of models based on different template structures (or combinations thereof) and/or alternative alignments and to select the best candidate based on the estimated quality of the resulting models [3-10].”
Ranking predicted protein structures with support vector regression
Qiu, J., Sheffler, W., Baker, D. A., & Noble, W. S. (2007) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21809 · Cited by 93 · cited 1×
“[34] recently described an approach in which a composite scoring function has been optimised for model selection using support vector machines.”
Servers for protein structure prediction
Fischer, D. (2006) · Current Opinion in Structural Biology · doi:10.1016/j.sbi.2006.03.004 · Cited by 91 · cited 1×
“for the first time in a community-wide experiment in 2004 as part of Critical Assessment of Fully Automated Structure Prediction (CAFASP) [40] and most recently at CASP7 [41,42].”
Benchmarking consensus model quality assessment for protein fold recognition
McGuffin, L. J. (2007) · BMC Bioinformatics · doi:10.1186/1471-2105-8-345 · Cited by 81 · cited 1×
“MaxSub [50] in 3Djury [11], LGscore [51] in Pcons [12] and TMscore [52] in the consensus method described in MODfold [53].”
Analysis of TASSER-based CASP7 protein structure prediction results
Zhou, H., Pandit, S. B., Lee, S. Y., Borreguero, J. M., Chen, H., Wróblewska, L., & Skolnick, J. (2007) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21649 · Cited by 72 · cited 1×
“a scoring function that always selects the models of the Zhang server [43,47].”
Improved protein structure selection using decoy-dependent discriminatory functions
Wang, K., Fain, B., Levitt, M., & Samudrala, R. (2004) · BMC Structural Biology · doi:10.1186/1472-6807-4-8 · Cited by 69
High accuracy template based modeling by global optimization
Joo, K., Lee, J., Lee, S., Seo, J., Lee, S. J., & Lee, J. (2007) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21628 · Cited by 68 · cited 1×
“The approach pursued by Lee and co-workers [45] for the quality assessment category of CASP7 was also quite successful.”
Predicting Reliable Regions in Protein Alignments from Sequence Profiles
Tress, M. L., Jones, D. T., & Valencia, A. (2003) · Journal of Molecular Biology · doi:10.1016/s0022-2836(03)00622-3 · Cited by 63 · cited 1×
“All terms are calculated over a sliding window of 9 residues and a triangular smoothing weighting scheme has been applied as described elsewhere [16,17].”
Local quality assessment in homology models using statistical potentials and support vector machines
Fasnacht, M., Zhu, J., & Honig, B. H. (2007) · Protein Science · doi:10.1110/ps.072856307 · Cited by 39 · cited 2×
“[39] published a local composite scoring function based on different terms combined by support vector machines resulting in a slightly better performance.”
Zhou, H., & Skolnick, J. (2007) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21813 · Cited by 37 · cited 9×
“The GDT_TS values as well as the data of the other methods are based on the quality assessment data of CASP7 and the data of TASSERQA have been kindly provided by the authors [35].”
InfluentialEstimating quality of template‐based protein models by alignment stability
Chen, H., & Kihara, D. (2007) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21819 · Cited by 35
Thorsteinsdottir, H. B., Schwede, T. F., Zoete, V., & Meuwly, M. (2006) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.21096 · Cited by 31 · cited 1×
“for mutagenesis studies, virtual screening and molecular replacement) [36-38].”
Self-citationImproving the quality of protein structure models by selecting from alignment alternatives
Sommer, I., Toppo, S., Sander, O., Lengauer, T., & Tosatto, S. C. E. (2006) · BMC Bioinformatics · doi:10.1186/1471-2105-7-364 · Cited by 21 · cited 1×
“However, in recent years there has been a clear trend in the field to generate a variety of models based on different template structures (or combinations thereof) and/or alternative alignments and to select the best candidate based on the estimated quality of the resulting models [3-10].”
Self-citationThreading without optimizing weighting factors for scoring function
Yang, Y. D., Park, C., & Kihara, D. (2008) · Proteins Structure Function and Bioinformatics · doi:10.1002/prot.22082 · Cited by 10 · cited 1×
“Using one scoring function for all modelling situations is not ideal as highlighted recently by Kihara coworkers [48].”
Cited by
Toward the estimation of the absolute quality of individual protein structure models
Benkert, P., Biasini, M., & Schwede, T. (2011) · Bioinformatics · doi:10.1093/bioinformatics/btq662 · Cited by 2,260
Self-citation
Metadata
- Authors
- Benkert, P., Schwede, T., & Tosatto, S. C.
- Venue
- BMC Structural Biology
- Published
- 2009
- Volume
- 9
- Issue
- 1
- Pages
- 35
- ISSN
- 1472-6807 (ISSN-L)
- OpenAlex
- W2072132202
- Cited by
- 167
- References
- 65
- FWCI
- 3.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.