The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components
Open accessAbstract
Surface topography and light scattering were measured on 15 samples ranging from those having smooth surfaces to others with ground surfaces. The measurement techniques included an atomic force microscope, mechanical and optical profilers, confocal laser scanning microscope, angle-resolved scattering, and total scattering. The samples included polished and ground fused silica, silicon carbide, sapphire, electroplated gold, and diamond-turned brass. The measurement instruments and techniques had different surface spatial wavelength band limits, so the measured roughnesses were not directly comparable. Two-dimensional power spectral density (PSD) functions were calculated from the digitized measurement data, and we obtained rms roughnesses by integrating areas under the PSD curves between fixed upper and lower band limits. In this way, roughnesses measured with different instruments and techniques could be directly compared. Although smaller differences between measurement techniques remained in the calculated roughnesses, these could be explained mostly by surface topographical features such as isolated particles that affected the instruments in different ways.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Binnig, G., Quate, C. F., & Gerber, C. (1986) · Physical Review Letters · doi:10.1103/physrevlett.56.930 · Cited by 14,762
Surface Studies by Scanning Tunneling Microscopy
Binnig, G., Rohrer, H., Gerber, C., & Weibel, E. (1982) · Physical Review Letters · doi:10.1103/physrevlett.49.57 · Cited by 4,777
(1993) · Methods in Experimental Physics · doi:10.1016/s0076-695x(08)x6001-6 · Cited by 1,776
Scanning force microscopy - With Applications to Electric, Magnetic and Atomic Forces
Sarid, D., Coratger, R., Ajustron, F., & Beauvillain, J. (1991) · Microscopy Microanalysis Microstructures · doi:10.1051/mmm:0199100206064900 · Cited by 563
The Topografiner: An Instrument for Measuring Surface Microtopography
Young, R., Ward, J., & Scire, F. (1972) · Review of Scientific Instruments · doi:10.1063/1.1685846 · Cited by 336
Scattering from multilayer thin films: theory and experiment
Bousquet, P., Flory, F. R., & Roche, P. J. (1981) · Journal of the Optical Society of America · doi:10.1364/josa.71.001115 · Cited by 177
Wilson, T. (1985) · Scanning · doi:10.1002/sca.4950070203 · Cited by 87
Cited by
Quantitative characterization of surface topography using spectral analysis
Jacobs, T. D. B., Junge, T., & Pastewka, L. (2017) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/aa51f8 · Cited by 509
Optics for concentrating photovoltaics: Trends, limits and opportunities for materials and design
Shanks, K., Senthilarasu, S., & Mallick, T. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.089 · Cited by 307
The infra-red dual imaging and spectrograph for SPHERE: design and performance
Dohlen, K., Langlois, M., Saisse, M., Hill, L., Origne, A., Jacquet, M., Fabron, C., Blanc, J.-C., Llored, M., Carle, M., et al. (2008) · SPIE Proceedings · doi:10.1117/12.789786 · Cited by 277
Bioadhesion in the oral cavity and approaches for biofilm management by surface modifications
Sterzenbach, T., Helbig, R., Hannig, C., & Hannig, M. (2020) · Clinical Oral Investigations · doi:10.1007/s00784-020-03646-1 · Cited by 212
Metadata
- Authors
- Duparré, A., Ferre-Borrull, J., Gliech, S., Notni, G., Steinert, J., & Bennett, J. M.
- Venue
- Applied Optics
- Publisher
- Optica Publishing Group
- Published
- 2002-01-01
- Volume
- 41
- Issue
- 1
- Pages
- 154
- ISSN
- 0003-6935 (ISSN-L)
- 1539-4522
- OpenAlex
- W1978818562
- Cited by
- 384
- References
- 7
- FWCI
- 7.45
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components. https://app.cochat.ai/papers/10.1364/ao.41.000154
- The paper
- Duparré, A., Ferre-Borrull, J., Gliech, S., Notni, G., Steinert, J., & Bennett, J. M. (2002). Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components. Applied Optics. https://doi.org/10.1364/ao.41.000154
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.