The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Freeform optics for imaging
Open accessAbstract
In the last 10 years, freeform optics has enabled compact and high-performance imaging systems. This article begins with a brief history of freeform optics, focusing on imaging systems, including marketplace emergence. The development of this technology is motivated by the clear opportunity to enable science across a wide range of applications, spanning from extreme ultraviolet lithography to space optics. Next, we define freeform optics and discuss concurrent engineering that brings together design, fabrication, testing, and assembly into one process. We then lay out the foundations of the aberration theory for freeform optics and emerging design methodologies. We describe fabrication methods, emphasizing deterministic computer numerical control grinding, polishing, and diamond machining. Next, we consider mid-spatial frequency errors that inherently result from freeform fabrication techniques. We realize that metrologies of freeform optics are simultaneously sparse in their existence but diverse in their potential. Thus, we focus on metrology techniques demonstrated for the measurement of freeform optics. We conclude this review with an outlook on the future of freeform optics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Beugungstheorie des schneidenver-fahrens und seiner verbesserten form, der phasenkontrastmethode
Zernike, V. F. (1934) · Physica · doi:10.1016/s0031-8914(34)80259-5 · Cited by 1,058
Wave-front estimation from wave-front slope measurements
Southwell, W. H. (1980) · Journal of the Optical Society of America · doi:10.1364/josa.70.000998 · Cited by 985
Thermal issues in machine tools
Mayr, J., JEDRZEJEWSKI, J., Uhlmann, E., et al. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.008 · Cited by 907
Manufacturing and measurement of freeform optics
Fang, F. Z., Zhang, X. D., Weckenmann, A., Zhang, G. X., & Evans, C. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.05.003 · Cited by 823
Self-citationManufacturing processes for engineering materials
SHAW, M. C. (1985) · International Journal of Machine Tool Design and Research · doi:10.1016/0020-7357(85)90061-7 · Cited by 794
High-dimensional quantum cryptography with twisted light
Mirhosseini, M., Magaña-Loaiza, O. S., O’Sullivan, M. N., Rodenburg, B., Malik, M., Lavery, M. P. J., Padgett, M. J., Gauthier, D. J., & Boyd, R. W. (2015) · New Journal of Physics · doi:10.1088/1367-2630/17/3/033033 · Cited by 652
Material Removal Mechanisms in Lapping and Polishing
Evans, C. J., Paul, E., Dornfeld, D., Lucca, D. A., Byrne, G., Tricard, M., Klocke, F., Dambon, O., & Mullany, B. A. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60207-8 · Cited by 383
Self-citationSub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres
Gissibl, T., Thiele, S., Herkommer, A., & Giessen, H. (2016) · Nature Communications · doi:10.1038/ncomms11763 · Cited by 359
High-dimensional quantum cryptography with twisted light
Mirhosseini, M., Magaña‐Loaiza, O. S., O’Sullivan, M. N., Rodenburg, B., Malik, M., Lavery, M. P. J., Padgett, M. J., Gauthier, D. J., & Boyd, R. W. (2015) · Civil War Book Review · Cited by 315
Additive Manufacturing of Optically Transparent Glass
Klein, J., Stern, M., Franchin, G., Kayser, M., Inamura, C., Dave, S., Weaver, J. C., Houk, P., Colombo, P., Yang, M., et al. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0021 · Cited by 289
Review of phase measuring deflectometry
Huang, L., Idir, M., Zuo, C., & Asundi, A. (2018) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2018.03.026 · Cited by 272
Optimization of computer controlled polishing
Jones, R. A. (1977) · Applied Optics · doi:10.1364/ao.16.000218 · Cited by 258
Methods for Computer Design of Diffractive Optical Elements
Soifer, V. A. (2001) · Cited by 177
Characterizing the shape of freeform optics
Forbes, G. W. (2012) · Optics Express · doi:10.1364/oe.20.002483 · Cited by 176
Pseudo-random tool paths for CNC sub-aperture polishing and other applications
Dunn, C. R., & Walker, D. D. (2008) · Optics Express · doi:10.1364/oe.16.018942 · Cited by 169
Evolution of the ‘Guide to the Expression of Uncertainty in Measurement’
Bich, W., Cox, M. G., & Harris, P. M. (2006) · Metrologia · doi:10.1088/0026-1394/43/4/s01 · Cited by 150
Measurement of the Nanoscale Roughness by Atomic Force Microscopy: Basic Principles and Applications
De, R. R. L., Albuquerque, D. A. C., Cruz, T. G. S., Yamaji, F. M., & Leite, F. L. (2012) · InTech eBooks · doi:10.5772/37583 · Cited by 147
Residual surface roughness of diamond-turned optics
Church, E. L., & Zavada, J. M. (1975) · Applied Optics · doi:10.1364/ao.14.001788 · Cited by 130
Scheiding, S., Yi, A. Y., Gebhardt, A., et al. (2011) · Optics Express · doi:10.1364/oe.19.023938 · Cited by 119
Review on fast tool servo machining of optical freeform surfaces
Zhu, L., Li, Z., Fang, F., Huang, S., & Zhang, X. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1271-4 · Cited by 100
Simple estimates for the effects of mid-spatial-frequency surface errors on image quality
Youngworth, R. N., & Stone, B. D. (2000) · Applied Optics · doi:10.1364/ao.39.002198 · Cited by 95
Effects of structured mid-spatial frequency surface errors on image performance
Tamkin, J. M., & Milster, T. D. (2010) · Applied Optics · doi:10.1364/ao.49.006522 · Cited by 95
Algorithm for ion beam figuring of low-gradient mirrors
Jiao, C., Li, S., & Xie, X. (2009) · Applied Optics · doi:10.1364/ao.48.004090 · Cited by 70
Effect of Mid- and High-Spatial Frequencies on Optical Performance
(1979) · Optical Engineering · doi:10.1117/12.7972338 · Cited by 69
Rapid optical surface figuring using reactive atom plasma
Castelli, M., Jourdain, R., Morantz, P., & Shore, P. (2012) · Precision Engineering · doi:10.1016/j.precisioneng.2012.02.005 · Cited by 68
Roughness characterization of smooth machined surfaces by light scattering
Stover, J. C. (1975) · Applied Optics · doi:10.1364/ao.14.001796 · Cited by 67
Materials Science and Technology of Optical Fabrication
Suratwala, T. I. (2018) · doi:10.1002/9781119423775 · Cited by 62
Twyman effect mechanics in grinding and microgrinding
Lambropoulos, J. C., Xu, S., Fang, T., & Golini, D. (1996) · Applied Optics · doi:10.1364/ao.35.005704 · Cited by 59
Self-citationOptimization of femtosecond laser processing of silicon via numerical modeling
Taylor, L. L., Qiao, J., & Qiao, J. (2016) · Optical Materials Express · doi:10.1364/ome.6.002745 · Cited by 52
Fitting freeform shapes with orthogonal bases
Forbes, G. W. (2013) · Optics Express · doi:10.1364/oe.21.019061 · Cited by 50
Theory of point-spread function artifacts due to structured mid-spatial frequency surface errors
Tamkin, J. M., Dallas, W. J., & Milster, T. D. (2010) · Applied Optics · doi:10.1364/ao.49.004814 · Cited by 47
Femtosecond laser polishing of germanium [Invited]
Taylor, L. L., Xu, J. M., Pomerantz, M., Smith, T. R., Lambropoulos, J. C., & Qiao, J. (2019) · Optical Materials Express · doi:10.1364/ome.9.004165 · Cited by 40
Self-citationOptical design with orthogonal representations of rotationally symmetric and freeform aspheres
Menke, C., & Forbes, G. W. (2013) · Advanced Optical Technologies · doi:10.1515/aot-2012-0072 · Cited by 36
Shafrir, S. N., Lambropoulos, J. C., & Jacobs, S. D. (2007) · Applied Optics · doi:10.1364/ao.46.005500 · Cited by 28
Self-citationTwo-quadrant area structure function analysis for optical surface characterization
He, L., Evans, C. J., & Davies, A. D. (2012) · Optics Express · doi:10.1364/oe.20.023275 · Cited by 28
Self-citationHull, T., Riso, M. J., Barentine, J. M., & Magruder, A. (2012) · SPIE Proceedings · doi:10.1117/12.921097 · Cited by 27
Aikens, D. M., Roussel, A., & Bray, M. (1995) · SPIE Proceedings · doi:10.1117/12.228287 · Cited by 25
Optical surface characterization with the area structure function
He, L., Evans, C. J., & Davies, A. D. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.03.103 · Cited by 24
Self-citationSpecifications: figure and finish are not enough
Parks, R. E. (2008) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.798223 · Cited by 24
Fast extreme ultraviolet lithography mask near-field calculation method based on machine learning
Lin, J., Dong, L., Fan, T., Ma, X., Chen, R., & Wei, Y. (2020) · Applied Optics · doi:10.1364/ao.384407 · Cited by 19
Optimization of the optical performance of variable-power and astigmatism Alvarez lenses
Peloux, M., & Berthelot, L. (2014) · Applied Optics · doi:10.1364/ao.53.006670 · Cited by 17
Correlation of mid-spatial features to image performance in aspheric mirrors
Tinker, F., & Xin, K. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2028015 · Cited by 8
Cited by
Augmented reality and virtual reality displays: emerging technologies and future perspectives
Xiong, J., Hsiang, E.-L., He, Z., Zhan, T., & Wu, S.-T. (2021) · Light: Science & Applications · doi:10.1038/s41377-021-00658-8 · Cited by 1,286
Metadata
- Authors
- Rolland, J. P., Davies, M. A., Suleski, T. J., Evans, C., Bauer, A., Lambropoulos, J. C., & Falaggis, K.
- Venue
- Optica
- Publisher
- Optica Publishing Group
- Published
- 2021-01-29
- Volume
- 8
- Issue
- 2
- Pages
- 161
- ISSN
- 2334-2536 (ISSN-L)
- OpenAlex
- W3118956845
- Cited by
- 401
- References
- 42
- FWCI
- 18.83
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.