The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A method for interpreting the data from depth-sensing indentation instruments
Abstract
Depth-sensing indentation instruments provide a means for studying the elastic and plastic properties of thin films. A method for obtaining hardness and Young's modulus from the data obtained from these types of instruments is described. Elastic displacements are determined from the data obtained during unloading of the indentation. Young's modulus can be calculated from these measurements. In addition, the elastic contribution to the total displacement can be removed in order to calculate hardness. Determination of the exact shape of the indenter at the tip is critical to the measurement of both hardness and elastic modulus for indentation depths less than a micron. Hardness is shown to depend on strain rate, especially when the hardness values are calculated from the data along the loading curves.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sneddon, I. N. (1965) · International Journal of Engineering Science · doi:10.1016/0020-7225(65)90019-4 · Cited by 4,346
Hardness measurement at penetration depths as small as 20 nm
Pethicai, J. B., Hutchings, R., & Oliver, W. C. (1983) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418618308234914 · Cited by 936
Vickers Indentation Curves of Magnesium Oxide (MgO)
Loubet, J. L., Georges, J. M., Marchesini, O., & Meille, G. (1984) · Journal of Tribology · doi:10.1115/1.3260865 · Cited by 421
Cited by
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Oliver, W. C., & Pharr, G. M. (2004) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2004.0002 · Cited by 8,190
Mechanical properties of thin films
Nix, W. D. (1989) · Metallurgical Transactions A · doi:10.1007/bf02666659 · Cited by 2,546
Self-citationPharr, G. M., Oliver, W. C., & Brotzen, F. R. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.0613 · Cited by 1,562
A review of nanoindentation continuous stiffness measurement technique and its applications
Li, X., & Bhushan, B. (2002) · Materials Characterization · doi:10.1016/s1044-5803(02)00192-4 · Cited by 1,561
Constantinides, G., & Ulm, F.-J. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00230-8 · Cited by 1,226
The search for novel, superhard materials
Vepřek, S. (1999) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.581977 · Cited by 1,208
Atomistic Mechanisms and Dynamics of Adhesion, Nanoindentation, and Fracture
Landman, U., Luedtke, W. D., Burnham, N. A., & Colton, R. J. (1990) · Science · doi:10.1126/science.248.4954.454 · Cited by 1,145
Measurement of mechanical properties by ultra-low load indentation
Pharr, G. M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(98)00724-2 · Cited by 1,088
Scaling, dimensional analysis, and indentation measurements
Cheng, Y.-T., & Cheng, C.-M. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.05.001 · Cited by 1,061
Measurement of Thin Film Mechanical Properties Using Nanoindentation
Pharr, G. M., & Oliver, W. C. (1992) · MRS Bulletin · doi:10.1557/s0883769400041634 · Cited by 1,012
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation
Rho, J.-Y., Tsui, T. Y., & Pharr, G. M. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00073-2 · Cited by 924
Elastic analysis of some punch problems for a layered medium
King, R. B. (1987) · International Journal of Solids and Structures · doi:10.1016/0020-7683(87)90116-8 · Cited by 898
The dentin substrate: structure and properties related to bonding
Marshall, G. W., Marshall, S. J., Kinney, J. H., & Balooch, M. (1997) · Journal of Dentistry · doi:10.1016/s0300-5712(96)00065-6 · Cited by 886
Nano-indentation of polymeric surfaces
Briscoe, B. J., Fiori, L., & Pelillo, E. (1998) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/31/19/006 · Cited by 760
Critical review of analysis and interpretation of nanoindentation test data
Fischer-Cripps, A. C. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.03.018 · Cited by 748
Kinney, J. H., Marshall, S. J., & Marshall, G. W. (2003) · Critical Reviews in Oral Biology & Medicine · doi:10.1177/154411130301400103 · Cited by 701
Stresses and deformation processes in thin films on substrates
Doerner, M. F., & Nix, W. D. (1988) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408438808243734 · Cited by 617
Self-citationMeasuring the elastic properties of anisotropic materials by means of indentation experiments
Vlassak, J. J., & Nix, W. D. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90033-7 · Cited by 551
Self-citationTurner, C. H., Rho, J., Takano, Y., Tsui, T. Y., & Pharr, G. M. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(98)00177-8 · Cited by 547
Nanoindentation of biological materials
Ebenstein, D. M., & Pruitt, L. A. (2006) · Nano Today · doi:10.1016/s1748-0132(06)70077-9 · Cited by 479
Elastic contact versus indentation modeling of multi-layered materials
Huajian, G., Cheng-Hsin, C., & Jin, L. (1992) · International Journal of Solids and Structures · doi:10.1016/0020-7683(92)90004-d · Cited by 472
A micro-indentation study of superplasticity in Pb, Sn, and Sn-38 wt% Pb
Mayo, M. J., & Nix, W. D. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90319-7 · Cited by 439
Self-citationThe mechanics of size-dependent indentation
Begley, M. R., & Hutchinson, J. W. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00018-0 · Cited by 401
Marshall, G. W., Balooch, M., Gallagher, R. R., Gansky, S. A., & Marshall, S. J. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200101)54:1<87::aid-jbm10>3.0.co;2-z · Cited by 379
Mechanical properties of nanophase TiO2 as determined by nanoindentation
Mayo, M. J., Siegel, R. W., Narayanasamy, A., & Nix, W. D. (1990) · Journal of Materials Research · doi:10.1557/jmr.1990.1073 · Cited by 369
Self-citationNanoindentation in polymer nanocomposites
Díez-Pascual, A. M., Gómez-Fatou, M. A., Ania, F., & Flores, A. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.06.002 · Cited by 368
On the use of nanoindentation for cementitious materials
Constantinides, G., Ulm, F. J., & Van Vliet, K. (2003) · Materials and Structures · doi:10.1007/bf02479557 · Cited by 367
Hardness and young's modulus of human peritubular and intertubular dentine
Kinney, J. H., Balooch, M., Marshall, S. J., Marshall, G. W., & Weihs, T. P. (1996) · Archives of Oral Biology · doi:10.1016/0003-9969(95)00109-3 · Cited by 361
Elastic properties of microstructural components of human bone tissue as measured by nanoindentation
Rho, J.-Y., Roy, M. E., Tsui, T. Y., & Pharr, G. M. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199904)45:1<48::aid-jbm7>3.0.co;2-5 · Cited by 348
Mechanical properties of cathode materials for lithium-ion batteries
Stallard, J. C., Wheatcroft, L., Booth, S. G., Boston, R., Corr, S. A., De Volder, M. F. L., Inkson, B. J., & Fleck, N. A. (2022) · Joule · doi:10.1016/j.joule.2022.04.001 · Cited by 336
Elastic and plastic properties of thin films on substrates: nanoindentation techniques
D. Nix, W. (1997) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00176-7 · Cited by 324
A review of analysis methods for sub-micron indentation testing
Fischer-Cripps, A. C. (2000) · Vacuum · doi:10.1016/s0042-207x(00)00377-8 · Cited by 319
Mechanical Properties of Electrospun Silk Fibers
Wang, M., Jin, H.-J., Kaplan, D. L., & Rutledge, G. C. (2004) · Macromolecules · doi:10.1021/ma048988v · Cited by 313
Indentation modulus of elastically anisotropic half spaces
Vlassak, J. J., & Nix, W. D. (1993) · Philosophical Magazine A · doi:10.1080/01418619308224756 · Cited by 297
Self-citationChen, X., Ogasawara, N., Zhao, M., & Chiba, N. (2007) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2007.01.010 · Cited by 278
Kalidindi, S. R., & Pathak, S. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.03.036 · Cited by 275
Measuring surface forces in aqueous electrolyte solution with the atomic force microscope
Butt, H.-J., Jaschke, M., & Ducker, W. (1995) · Bioelectrochemistry and Bioenergetics · doi:10.1016/0302-4598(95)01800-t · Cited by 273
Mechanical properties of spruce wood cell walls by nanoindentation
Gindl, W., Gupta, H. S., Schöberl, T., Lichtenegger, H. C., & Fratzl, P. (2004) · Applied Physics A · doi:10.1007/s00339-004-2864-y · Cited by 268
Nanoindentation and incipient plasticity
Tadmor, E. B., Miller, R., Phillips, R., & Ortiz, M. (1999) · Journal of Materials Research · doi:10.1557/jmr.1999.0300 · Cited by 266
Costa, K. D., & Yin, F. C. P. (1999) · Journal of Biomechanical Engineering · doi:10.1115/1.2835074 · Cited by 265
Graded Microstructure and Mechanical Properties of Human Crown Dentin
Tesch, W., Eidelman, N., Roschger, P., Goldenberg, F., Klaushofer, K., & Fratzl, P. (2001) · Calcified Tissue International · doi:10.1007/s00223-001-2012-z · Cited by 263
Heterogeneity of bone lamellar-level elastic moduli
Hoffler, C. E., Moore, K. E., Kozloff, K., Zysset, P. K., Brown, M. B., & Goldstein, S. A. (2000) · Bone · doi:10.1016/s8756-3282(00)00268-4 · Cited by 259
The ideal strength of tungsten
Roundy, D., Krenn, C. R., Cohen, M. L., & Morris, J. W. (2001) · Philosophical Magazine A · doi:10.1080/01418610108216634 · Cited by 253
Effects of drying on the mechanical properties of bovine femur measured by nanoindentation
Rho, J.-Y., & Pharr, G. M. (1999) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008901109705 · Cited by 253
Chicot, D., Mendoza, J., Zaoui, A., Louis, G., Lepingle, V., Roudet, F., & Lesage, J. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.056 · Cited by 238
An Application of Nanoindentation Technique to Measure Bone Tissue Lamellae Properties
Hoffler, C. E., Guo, X. E., Zysset, P. K., & Goldstein, S. A. (2005) · Journal of Biomechanical Engineering · doi:10.1115/1.2073671 · Cited by 222
Metadata
- Authors
- Doerner, M. F., & Nix, W. D.
- Venue
- Journal of Materials Research
- Published
- 1986-08
- Volume
- 1
- Issue
- 4
- Pages
- 601-609
- ISSN
- 0884-1616 (ISSN-L)
- 0884-2914
- 2044-5326
- OpenAlex
- W2119680087
- Cited by
- 2,863
- References
- 3
- FWCI
- 33.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.