The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Physical Origins of Intrinsic Stresses in Volmer–Weber Thin Films
Abstract
As-deposited thin films grown by vapor deposition often exhibit large intrinsic stresses that can lead to film failure. While this is an “old” materials problem, our understanding has only recently begun to evolve in a more sophisticated fashion. Sensitive real-time measurements of stress evolution during thin-film deposition reveal a generic compressive–tensile–compressive behavior that correlates with island nucleation and growth, island coalescence, and postcoalescence film growth. In this article, we review the fundamental mechanisms that can generate stresses during the growth of Volmer–Weber thin films. Compressive stresses in both discontinuous and continuous films are generated by surface-stress effects. Tensile stresses are created during island coalescence and grain growth. Compressive stresses can also result from the flux-driven incorporation of excess atoms within grain boundaries. While significant progress has been made in this field recently, further modeling and experimentation are needed to quantitatively sort out the importance of the different mechanisms to the overall behavior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Johnson, K. L. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9781139171731 · Cited by 7,796
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
Mechanical properties of thin films
Nix, W. D. (1989) · Metallurgical Transactions A · doi:10.1007/bf02666659 · Cited by 2,546
Surface and interface stress effects in thin films
Cammarata, R. C. (1994) · Progress in Surface Science · doi:10.1016/0079-6816(94)90005-1 · Cited by 950
Self-citationCrystallite coalescence: A mechanism for intrinsic tensile stresses in thin films
Nix, W. D., & Clemens, B. M. (1999) · Journal of Materials Research · doi:10.1557/jmr.1999.0468 · Cited by 661
Stresses and deformation processes in thin films on substrates
Doerner, M. F., & Nix, W. D. (1988) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408438808243734 · Cited by 617
Origin of Compressive Residual Stress in Polycrystalline Thin Films
Chason, E., Sheldon, B. W., Freund, L. B., Floro, J. A., & Hearne, S. J. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.156103 · Cited by 483
Self-citationStresses in thin films: The relevance of grain boundaries and impurities
Hoffman, R. W. (1976) · Thin Solid Films · doi:10.1016/0040-6090(76)90453-3 · Cited by 479
The intrinsic stress of polycrystalline and epitaxial thin metal films
Koch, R. (1994) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/6/45/005 · Cited by 451
Floro, J. A., Hearne, S. J., Hunter, J. A., Kotula, P., Chason, E., Seel, S. C., & Thompson, C. V. (2001) · Journal of Applied Physics · doi:10.1063/1.1352563 · Cited by 357
Self-citationGrain Growth and Stress Relief in Thin Films
Chaudhari, P. (1972) · Journal of Vacuum Science and Technology · doi:10.1116/1.1316674 · Cited by 317
Surface stress model for intrinsic stresses in thin films
Cammarata, R. C., Trimble, T. M., & Srolovitz, D. J. (2000) · Journal of Materials Research · doi:10.1557/jmr.2000.0354 · Cited by 239
Self-citationMeasurements of stress during vapor deposition of copper and silver thin films and multilayers
Shull, A. L., & Spaepen, F. (1996) · Journal of Applied Physics · doi:10.1063/1.363701 · Cited by 233
The yield stress of polycrystalline thin films
Thompson, C. V. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.0237 · Cited by 219
Model for stress generated upon contact of neighboring islands on the surface of a substrate
Freund, L. B., & Chason, E. (2001) · Journal of Applied Physics · doi:10.1063/1.1359437 · Cited by 206
Self-citationEffects of barrier layer and annealing on abnormal grain growth in copper thin films
Zielinski, E. M., Vinci, R. P., & Bravman, J. C. (1994) · Journal of Applied Physics · doi:10.1063/1.357283 · Cited by 132
Sheldon, B. W., Lau, K. H. A., & Rajamani, A. (2001) · Journal of Applied Physics · doi:10.1063/1.1412577 · Cited by 116
In Situ Real-Time Characterization of Thin Films
Krauss, O. A. A. A. R. (2002) · Measurement Science and Technology · doi:10.1088/0957-0233/13/4/705 · Cited by 66
Cited by
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
A practical guide to pulsed laser deposition
Shepelin, N. A., Tehrani, Z. P., Ohannessian, N., Schneider, C. W., Pergolesi, D., & Lippert, T. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00938b · Cited by 322
Fritz, J. (2008) · The Analyst · doi:10.1039/b718174d · Cited by 254
Stress and strain in polycrystalline thin films
Janssen, G. C. A. M. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.03.007 · Cited by 253
Kinetic Model for Dependence of Thin Film Stress on Growth Rate, Temperature, and Microstructure
Chason, E., Shin, J. W., Hearne, S. J., & Freund, L. B. (2012) · Journal of Applied Physics · doi:10.1063/1.4704683 · Cited by 134
Self-citation
Metadata
- Authors
- Floro, J. A., Chason, E., Cammarata, R. C., & Srolovitz, D. J.
- Venue
- MRS Bulletin
- Published
- 2002-01
- Volume
- 27
- Issue
- 1
- Pages
- 19-25
- ISSN
- 0883-7694 (ISSN-L)
- 1938-1425
- OpenAlex
- W2118548727
- Cited by
- 311
- References
- 18
- FWCI
- 30.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.