Comprehensive Adsorption Studies of Doxycycline and Ciprofloxacin Antibiotics by Biochars Prepared at Different Temperatures
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
This paper comparatively investigated the removal efficiency and mechanisms of rice straw biochars prepared under three pyrolytic temperatures for two kinds of tetracycline and quinolone antibiotics (doxycycline and ciprofloxacin). The influencing factors of antibiotic adsorption (including biochar dosage, pH, background electrolytes, humic acid, initial antibiotics concentration, contact time, and temperature) were comprehensively studied. The results suggest that biochars produced at high-temperature [i.e., 700°C (BC700)], have higher adsorption capacity for the two antibiotics than low-temperature (i.e., 300-500°C) biochars (BC300 and BC500). Higher surface area gives rise to greater volume of micropores and mesopores, and higher graphitic surfaces of the BC700 contributed to its higher functionality. The maximum adsorption capacity was found to be in the following order: DOX > CIP. The π-π EDA interaction and hydrogen bonding might be the predominant adsorption mechanisms. Findings in this study highlight the important roles of high-temperature biochars in controlling the contamination of tetracycline and quinolone antibiotics in the environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Petrie, B., Barden, R., & Kasprzyk-Hordern, B. (2015) · Water Research · doi:10.1016/j.watres.2014.08.053 · Cited by 2,614 · cited 2×
“Increasing public concern has been drawn to the non-regulated trace organic emerging contaminants (ECs), including pharmaceuticals, halogenated flame retardants, illicit drugs, and personal care products (Daughton and Ternes, 1999; Boxall et al., 2012; Marti et al., 2014; Petrie et al., 2015).”
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081 · cited 2×
“It is reported that pyrolytic temperature has significant effect on the properties of the biochar and is likely to be a major factor contributing to the adsorption properties of the biochar (Tan et al., 2015).”
Self-citationChen, B., Zhou, D., & Zhu, L. (2008) · Environmental Science & Technology · doi:10.1021/es8002684 · Cited by 1,823
Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357 · cited 4×
“The lower O/C ratio of biochar produced at higher temperature indicated that the surfaces of high-temperature biochar were more aromatic and less hydrophilic due to the greater extent of carbonization and the loss of polar functional groups (Chen et al., 2008, 2012b; Ahmad et al., 2012; Kim et al., 2013).”
InfluentialCompositions and sorptive properties of crop residue-derived chars
Chun, Y., Sheng, G., Chiou, C. T., & Xing, B. (2004) · Environmental Science & Technology · doi:10.1021/es035034w · Cited by 1,079 · cited 1×
“The surface hydrophilicity of biochar may be described by the O/C ratio, since it is indicative of polar-group content (Chun et al., 2004; Chen X. et al., 2011).”
A novel magnetic biochar efficiently sorbs organic pollutants and phosphate
Chen, B., Chen, Z., & Lv, S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.08.067 · Cited by 1,026
Ahmed, M. B., Zhou, J. L., Ngo, H. H., Guo, W., & Chen, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.05.057 · Cited by 843 · cited 2×
“A series of peaks at 400–800 cm−1 were formed after the adsorption of DOX and CIP, which were attributed to aromatic –CH stretching vibration, C–C stretch or C–O–H bending of antibiotics (Ahmed et al., 2016), suggesting that plenty of antibiotics molecules were adsorbed onto the surface of the biochar.”
Peiris, C., Gunatilake, S. R., Mlsna, T. E., Mohan, D., & Vithanage, M. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.150 · Cited by 604 · cited 6×
“In addition, Mg2+ and Ca2+ might directly compete for adsorption sites due to inner-sphere complexation, and therefore hinders the formation of charge-assisted H-bonds with antibiotics (Xie et al., 2014; Peiris et al., 2017).”
InfluentialFang, Q., Chen, B., Lin, Y., & Guan, Y. (2014) · Environmental Science & Technology · doi:10.1021/es403711y · Cited by 446 · cited 1×
“…condensed aromatic surfaces, as the hydrogen bonding to functional groups of BC700 was facilitated by the large π subunit of its aromatic substrate (Fang et al., 2014; Frontiers in Chemistry | www.frontiersin.org 8 March 2018 | Volume 6 | Article 80 FIGURE 6 | The proposed mechanisms for DOX and…”
Kim, W.-K., Shim, T., Kim, Y.-S., Hyun, S., Ryu, C., Park, Y.-K., & Jung, J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.03.186 · Cited by 366 · cited 2×
“The lower O/C ratio of biochar produced at higher temperature indicated that the surfaces of high-temperature biochar were more aromatic and less hydrophilic due to the greater extent of carbonization and the loss of polar functional groups (Chen et al., 2008, 2012b; Ahmad et al., 2012; Kim et al., 2013).”
Cited by
Dai, Y., Zhang, N., Xing, C., Cui, Q., & Sun, Q. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.01.161 · Cited by 935
Zhang, P., Li, Y., Cao, Y., & Han, L. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121348 · Cited by 449
Engineered biochar – A sustainable solution for the removal of antibiotics from water
Krasucka, P., Pan, B., Sik Ok, Y., Mohan, D., Sarkar, B., & Oleszczuk, P. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126926 · Cited by 401
Biomass-derived porous graphitic carbon materials for energy and environmental applications
Chen, Q., Tan, X., Liu, Y., Liu, S., Li, M., Gu, Y., Zhang, P., Ye, S., Yang, Z., & Yang, Y. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta11618d · Cited by 390
Self-citationGraphene and graphene-based nanocomposites used for antibiotics removal in water treatment: A review
Li, M.-F., Liu, Y.-G., Zeng, G.-M., Liu, N., & Liu, S.-B. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.03.117 · Cited by 351
Self-citationYang, W., Li, J., Yao, Z., & Li, M. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2024.171757 · Cited by 266
Self-citationUtilization of biochar for resource recovery from water: A review
Yang, H., Ye, S., Zeng, Z., Zeng, G., Tan, X., Xiao, R., Wang, J., Song, B., Du, L., Qin, M., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125502 · Cited by 230
Self-citationOlusegun, S. J., & Mohallem, N. D. S. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114019 · Cited by 186
Xiang, Y., Xu, Z., Zhou, Y., Wei, Y., Long, X., He, Y., Zhi, D., Yang, J., & Luo, L. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.124464 · Cited by 178
Removal of pharmaceuticals from water using sewage sludge-derived biochar: A review
Ihsanullah, I., Khan, M. T., Zubair, M., Bilal, M., & Sajid, M. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133196 · Cited by 165
Maged, A., Kharbish, S., Ismael, I. S., & Bhatnagar, A. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-09267-1 · Cited by 164
Chakhtouna, H., Benzeid, H., Zari, N., Qaiss, A. E. K., & Bouhfid, R. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.118592 · Cited by 145
Perspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Functional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review
Zhang, Y., Wang, S., Feng, D., Gao, J., Dong, L., Zhao, Y., Sun, S., Huang, Y., & Qin, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c04372 · Cited by 91
Metadata
- Authors
- Zeng, Z.-W., Tan, X.-F., Liu, Y.-G., Tian, S.-R., Zeng, G.-M., Jiang, L.-H., Liu, S.-B., Li, J., Liu, N., & Yin, Z.-H.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2018-03-27
- Volume
- 6
- Pages
- 80-80
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W2795102143
- Cited by
- 230
- References
- 11
- FWCI
- 9.44
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.