The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Recent Progress in Manufacturing Techniques of Printed and Flexible Sensors: A Review
Open accessAbstract
This review provides an outlook on some of the significant research work done on printed and flexible sensors. Printed sensors fabricated on flexible platforms such as paper, plastic and textiles have been implemented for wearable applications in the biomedical, defense, food, and environmental industries. This review discusses the materials, characterization methods, and fabrication methods implemented for the development of the printed and flexible sensors. The applications, challenges faced and future opportunities for the printed and flexible sensors are also presented in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Nanomaterial-Enabled Wearable Sensors for Healthcare
Yao, S., Swetha, P., & Zhu, Y. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700889 · Cited by 576
Wireless smart contact lens for diabetic diagnosis and therapy
Keum, D. H., Kim, S.-K., Koo, J., Lee, G.-H., Jeon, C., Mok, J. W., Mun, B. H., Lee, K. J., Kamrani, E., Joo, C.-K., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba3252 · Cited by 483
Contact Lens Sensors in Ocular Diagnostics
Farandos, N. M., Yetisen, A. K., Monteiro, M. J., Lowe, C. R., & Yun, S. H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400504 · Cited by 466
Roll-to-Roll Gravure Printed Electrochemical Sensors for Wearable and Medical Devices
Bariya, M., Shahpar, Z., Park, H., Sun, J., Jung, Y., Gao, W., Nyein, H. Y. Y., Liaw, T. S., Tai, L.-C., Ngo, Q. P., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b02505 · Cited by 417
Stretchable Ferroelectric Nanoribbons with Wavy Configurations on Elastomeric Substrates
Feng, X., Yang, B. D., Liu, Y., Wang, Y., Dagdeviren, C., Liu, Z., Carlson, A., Li, J., Huang, Y., & Rogers, J. A. (2011) · ACS Nano · doi:10.1021/nn200477q · Cited by 219
A carbon nanotube based NTC thermistor using additive print manufacturing processes
Turkani, V. S., Maddipatla, D., Narakathu, B. B., Bazuin, B. J., & Atashbar, M. Z. (2018) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2018.05.042 · Cited by 145
Self-citationA fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
Lee, W., Koo, H., Sun, J., Noh, J., Kwon, K.-S., Yeom, C., Choi, Y., Chen, K., Javey, A., & Cho, G. (2015) · Scientific Reports · doi:10.1038/srep17707 · Cited by 130
Research works printed but not linked: 134
- Anderson, G., and Anderson, G. (2016). The economic impact of technology infrastructure for smart manufacturing, US Department of Commerce. Natl. Inst. Stand. Technol. · DOI
- Ho, 2005, Overview of sensors and needs for environmental monitoring, Sensors, 5, 4, 10.3390/s5010004 · DOI · Paper page
- Lymberis, A. (2003, January 24–26). Smart wearables for remote health monitoring, from prevention to rehabilitation: Current R&D, future challenges. Proceedings of the International IEEE EMBS Special Topic Conference on Information Technology Applications in Biomedicine, Birmingham, UK.
- Wilson, J.S. (2004). Sensor Technology Handbook, Elsevier.
- Khan, 2020, A New Frontier of Printed Electronics: Flexible Hybrid Electronics, Adv. Mater., 32, e1905279, 10.1002/adma.201905279 · DOI · Paper page
- Maddipatla, 2020, A Polyimide Based Force Sensor Fabricated Using Additive Screen-Printing Process for Flexible Electronics, IEEE Access, 8, 207813, 10.1109/ACCESS.2020.3037703 · DOI
- Perelaer, 2010, Printed electronics: The challenges involved in printing devices, interconnects, and contacts based on inorganic materials, J. Mater. Chem., 20, 8446, 10.1039/c0jm00264j · DOI · Paper page
- Zhang, 2020, Printed Carbon Nanotubes Based Flexible Resistive Humidity Sensor, IEEE Sens. J., 20, 12592, 10.1109/JSEN.2020.3002951 · DOI
- Maddipatla, D., Narakathu, B., Turkani, V., Bazuin, B., and Atashbar, M. (2018). A gravure printed flexible electrochemical sensor for the detection of heavy metal compounds. Multidiscip. Digit. Publ. Inst. Proc., 2. · DOI
- Garlapati, 2018, Printed electronics based on inorganic semiconductors: From processes and materials to devices, Adv. Mater., 30, 1707600, 10.1002/adma.201707600 · DOI · Paper page
- Choi, 2015, Recent developments and directions in printed nanomaterials, Nanoscale, 7, 3338, 10.1039/C4NR03915G · DOI
- Chlaihawi, 2017, A screen printed and flexible piezoelectric-based AC magnetic field sensor, Sens. Actuators A Phys., 268, 1, 10.1016/j.sna.2017.10.030 · DOI
- Kim, 2008, Stretchable and foldable silicon integrated circuits, Science, 320, 507, 10.1126/science.1154367 · DOI · Paper page
- Jang, 2014, Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring, Nat. Commun., 5, 1, 10.1038/ncomms5779 · DOI · Paper page
- Eshkeiti, A. (2015). Novel Stretchable Printed Wearable Sensor for Monitoring Body Movement, Temperature and Electrocardiogram, Along with the Readout Circuit. [Ph.D. Thesis, Western Michigan University].
- Nakata, 2017, Wearable, flexible, and multifunctional healthcare device with an ISFET chemical sensor for simultaneous sweat pH and skin temperature monitoring, ACS Sens., 2, 443, 10.1021/acssensors.7b00047 · DOI · Paper page
- Cheng, 2016, Dissolvable tattoo sensors: From science fiction to a viable technology, Phys. Scr., 92, 013001, 10.1088/0031-8949/92/1/013001 · DOI
- Liu, Y., Wang, H., Zhao, W., Zhang, M., Qin, H., and Xie, Y. (2018). Flexible, stretchable sensors for wearable health monitoring: Sensing mechanisms, materials, fabrication strategies and features. Sensors, 18. · DOI · Paper page
- Shetti, 2020, Skin-Patchable Electrodes for Biosensor Applications: A Review, ACS Biomater. Sci. Eng., 6, 1823, 10.1021/acsbiomaterials.9b01659 · DOI
- Dinesh, M. (2016). Development of Fully Printed and Flexible Strain, Pressure and Electrochemical Sensors. [Master’s Thesis, Western Michigan University].
- Suganuma, K. (2014). Introduction to Printed Electronics, Springer Science & Business Media. · DOI · Paper page
- Liao, 2019, Printed electronics based on inorganic conductive nanomaterials and their applications in intelligent food packaging, RSC Adv., 9, 29154, 10.1039/C9RA05954G · DOI
- Dahiya, 2020, High-performance printed electronics based on inorganic semiconducting nano to chip scale structures, Nano Converg., 7, 1, 10.1186/s40580-020-00243-6 · DOI
- Reddy, A.S.G., Narakathu, B.B., Eshkeiti, A., Bazuin, B.J., Joyce, M., and Atashbar, M.Z. (2013, January 3–6). Fully printed organic thin film transistors (OTFT) based flexible humidity sensors. Proceedings of the IEEE Sensors Conference Proceedings, Baltimore, MD, USA. · DOI
- Ali, 2018, Printed strain sensor based on silver nanowire/silver flake composite on flexible and stretchable TPU substrate, Sens. Actuators A Phys., 274, 109, 10.1016/j.sna.2018.03.003 · DOI
- Lim, 2013, Inkjet printing and sintering of nano-copper ink, J. Imaging Sci. Technol., 57, 50506-1, 10.2352/J.ImagingSci.Technol.2013.57.5.050506 · doi:10.2352/j.imagingsci.technol.2013.57.5.050506
- Tehrani, 2017, Large-area printed supercapacitor technology for low-cost domestic green energy storage, Energy, 118, 1313, 10.1016/j.energy.2016.11.019 · doi:10.1016/j.energy.2016.11.019
- Kang, 2010, Inkjet printed electronics using copper nanoparticle ink, J. Mater. Sci. Mater. Electron., 21, 1213, 10.1007/s10854-009-0049-3 · DOI · Paper page
- Beduk, 2020, A paper-based inkjet-printed PEDOT: PSS/ZnO sol-gel hydrazine sensor, Sens. Actuators B Chem., 306, 127539, 10.1016/j.snb.2019.127539 · doi:10.1016/j.snb.2019.127539
- Arias, 2010, Materials and applications for large area electronics: Solution-based approaches, Chem. Rev., 110, 3, 10.1021/cr900150b · DOI · Paper page
- Wang, X., and Liu, J. (2016). Recent advancements in liquid metal flexible printed electronics: Properties, technologies, and applications. Micromachines, 7. · DOI · Paper page
- Chang, 2009, A large area flexible array sensors using screen printing technology, J. Disp. Technol., 5, 178, 10.1109/JDT.2008.2004862 · DOI
- Stringer, 2016, Integration of additive manufacturing and inkjet printed electronics: A potential route to parts with embedded multifunctionality, Manuf. Rev., 3, 12
- Katerinopoulou, 2019, Large-area all-printed temperature sensing surfaces using novel composite thermistor materials, Adv. Electron. Mater., 5, 1800605, 10.1002/aelm.201800605 · DOI
- Fu, 2019, Fabrication of large-area bimodal sensors by all-inkjet-printing, Adv. Mater. Technol., 4, 1800703, 10.1002/admt.201800703 · DOI
- Cui, Z. (2016). Printed Electronics: Materials, Technologies and Applications, John Wiley & Sons. · doi:10.1002/9781118920954
- Hoeng, 2016, Use of nanocellulose in printed electronics: A review, Nanoscale, 8, 13131, 10.1039/C6NR03054H · DOI · Paper page
- Caironi, 2010, High yield, single droplet electrode arrays for nanoscale printed electronics, ACS Nano, 4, 1451, 10.1021/nn9014664 · DOI
- Lessing, 2014, Inkjet Printing of conductive inks with high lateral resolution on omniphobic “Rf paper” for paper-based electronics and MEMS, Adv. Mater., 26, 4677, 10.1002/adma.201401053 · doi:10.1002/adma.201401053
- Maddipatla, D., Narakathu, B.B., Ali, M.M., Chlaihawi, A.A., and Atashbar, M.Z. (2017, January 13–15). Development of a novel carbon nanotube based printed and flexible pressure sensor. Proceedings of the 2017 IEEE Sensors Applications Symposium (SAS), Glassboro, NJ, USA. · DOI
- Visakh, P.M., and Semkin, A.O. (2018). High Performance Polymers and Their Nanocomposites, John Wiley & Sons.
- Sondhi, 2018, Airbrushing and surface modification for fabricating flexible electronics on polydimethylsiloxane, J. Micromech. Microeng., 28, 125014, 10.1088/1361-6439/aae9d6 · DOI
- Li, 2016, Adhesive stretchable printed conductive thin film patterns on PDMS surface with an atmospheric plasma treatment, ACS Appl. Mater. Interfaces, 8, 11868, 10.1021/acsami.6b02844 · DOI
- Agate, 2018, Cellulose and nanocellulose-based flexible-hybrid printed electronics and conductive composites—A review, Carbohydr. Polym., 198, 249, 10.1016/j.carbpol.2018.06.045 · DOI · Paper page
- Sato, 2020, Dry sliding friction and Wear behavior of thermoplastic polyurethane against abrasive paper, Biotribology, 23, 100130, 10.1016/j.biotri.2020.100130 · doi:10.1016/j.biotri.2020.100130
- Izdebska-Podsiadły, J., and Thomas, S. (2015). Printing on Polymers: Fundamentals and Applications, Elsevier.
- Kamyshny, 2014, Conductive nanomaterials for printed electronics, Small, 10, 3515, 10.1002/smll.201303000 · DOI · Paper page
- Junaidi, 2017, High-performance silver nanowire film on flexible substrate prepared by meyer-rod coating, Mater. Sci. Eng., 202, 012055
- Marinho, 2012, Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder, Powder Technol., 221, 351, 10.1016/j.powtec.2012.01.024 · DOI · Paper page
- Tulliani, J.M., Inserra, B., and Ziegler, D. (2019). Carbon-based materials for humidity sensing: A short review. Micromachines, 10. · DOI · Paper page
- Farraj, 2017, Effect of carboxylic acids on conductivity of metallic films formed by inks based on copper@ silver core-shell particles, Colloids Surf. A Physicochem. Eng. Asp., 522, 320, 10.1016/j.colsurfa.2017.03.019 · doi:10.1016/j.colsurfa.2017.03.019
- Huang, 2019, Printing conductive nanomaterials for flexible and stretchable electronics: A review of materials, processes, and applications, Adv. Mater. Technol., 4, 1800546, 10.1002/admt.201800546 · DOI · Paper page
- Altay, 2018, Impact of substrate and process on the electrical performance of screen-printed nickel electrodes: Fundamental mechanism of ink film roughness, ACS Appl. Energy Mater., 1, 7164, 10.1021/acsaem.8b01618 · DOI
- Ahmad, M., Malik, S., Dewan, S., Bose, A.K., Maddipatla, D., Narakathu, B.B., Atashbar, M.Z., and Baghini, M.S. (2020). An Auto-Calibrated Resistive Measurement System with Low Noise Instrumentation ASIC. IEEE J. Solid-State Circuits. · DOI
- Hu, 2018, Functional inks and printing of two-dimensional materials, Chem. Soc. Rev., 47, 3265, 10.1039/C8CS00084K · DOI · Paper page
- Huang, 2018, Gravure printing of water-based silver nanowire ink on plastic substrate for flexible electronics, Sci. Rep., 8, 1
- Ochoa, 2020, Integrated sensing and delivery of oxygen for next-generation smart wound dressings, Microsyst. Nanoeng., 6, 1, 10.1038/s41378-020-0141-7 · DOI
- Tang, 2016, A new photoelectric ink based on nanocellulose/CdS quantum dots for screen-printing, Carbohydr. Polym., 148, 29, 10.1016/j.carbpol.2016.04.034 · DOI
- Faddoul, 2012, Formulation and screen printing of water based conductive flake silver pastes onto green ceramic tapes for electronic applications, Mater. Sci. Eng. B, 177, 1053, 10.1016/j.mseb.2012.05.015 · doi:10.1016/j.mseb.2012.05.015
- Chen, 2015, Screen printing insulator coatings for electrofluidic display devices, Phys. Status Solidi A, 212, 2023, 10.1002/pssa.201532071 · doi:10.1002/pssa.201532071
- Schlisske, S., Rosenauer, C., Rödlmeier, T., Giringer, K., Michels, J.J., Kremer, K., Lemmer, U., Morsbach, S., Daoulas, K.C., and Hernandez-Sosa, G. (2020). Ink Formulation for Printed Organic Electronics: Investigating Effects of Aggregation on Structure and Rheology of Functional Inks Based on Conjugated Polymers in Mixed Solvents. Adv. Mater. Technol., 2000335. · doi:10.1002/admt.202000335
- Daalkhaijav, 2018, Rheological modification of liquid metal for additive manufacturing of stretchable electronics, Adv. Mater. Technol., 3, 1700351, 10.1002/admt.201700351 · doi:10.1002/admt.201700351
- Morgan, 2019, Control of morphological and electrical properties of flexographic printed electronics through tailored ink rheology, Org. Electron., 73, 212, 10.1016/j.orgel.2019.05.027 · doi:10.1016/j.orgel.2019.05.027
- Irgens, F. (2014). Rheology and Non-Newtonian Fluids, Springer International Publishing. · doi:10.1007/978-3-319-01053-3
- Alexander, D.E. (2017). Nature’s Machines: An Introduction to Organismal Biomechanics, Academic Press.
- Khandavalli, 2017, Ink transfer of non-Newtonian fluids from an idealized gravure cell: The effect of shear and extensional deformation, J. Non-Newton. Fluid Mech., 243, 16, 10.1016/j.jnnfm.2017.02.005 · DOI
- Ozkan, 2016, Rheological characterization of liquid electrolytes for drop-on-demand inkjet printing, Org. Electron., 38, 307, 10.1016/j.orgel.2016.09.001 · doi:10.1016/j.orgel.2016.09.001
- Derby, 2020, Inkjet printing of functional and structural materials: Fluid property requirements, feature stability, and resolution, Annu. Rev. Mater. Res., 40, 395, 10.1146/annurev-matsci-070909-104502 · DOI · Paper page
- Berry, 2015, Measurement of surface and interfacial tension using pendant drop tensiometry, J. Colloid Interface Sci., 454, 226, 10.1016/j.jcis.2015.05.012 · DOI · Paper page
- Chaudhuri, B. (2018). Biopolymers-graphene oxide nanoplatelets composites with enhanced conductivity and biocompatibility suitable for tissue engineering applications. Fullerens, Graphenes and Nanotubes, William Andrew Publishing. · DOI
- Altay, 2020, Surface Free Energy Estimation: A New Methodology for Solid Surfaces, Adv. Mater. Interfaces, 7, 1901570, 10.1002/admi.201901570 · doi:10.1002/admi.201901570
- Ali, 2018, Flexible capacitive pressure sensor based on pdms substrate and Ga–In liquid metal, IEEE Sens. J., 19, 97, 10.1109/JSEN.2018.2877929 · DOI
- Gerhard, 2012, Low-temperature atmospheric pressure argon plasma treatment and hybrid laser-plasma ablation of barite crown and heavy flint glass, Appl. Opt., 51, 3847, 10.1364/AO.51.003847 · doi:10.1364/ao.51.003847
- Turkani, 2019, A highly sensitive printed humidity sensor based on a functionalized MWCNT/HEC composite for flexible electronics application, Nanoscale Adv., 1, 2311, 10.1039/C9NA00179D · DOI
- Lawal, S.A., and Ndaliman, M.B. (2017). Surface Roughness Characteristics in Finish Electro-Discharge Machining Process, Elsevier. · doi:10.1016/b978-0-12-803581-8.09184-0
- Kipphan, H. (2001). Handbook of Print Media: Technologies and Production Methods, Springer. · doi:10.1007/978-3-540-29900-4
- Wu, 2017, Inorganic nanomaterials for printed electronics: A review, Nanoscale, 9, 7342, 10.1039/C7NR01604B · DOI · Paper page
- Metters, 2011, New directions in screen printed electroanalytical sensors: An overview of recent developments, Analyst, 136, 1067, 10.1039/c0an00894j · DOI · Paper page
- Eshkeiti, 2015, Screen printing of multilayered hybrid printed circuit boards on different substrates, IEEE Trans. Compon. Packag. Manuf. Technol., 5, 415, 10.1109/TCPMT.2015.2391012 · DOI
- Cao, 2014, Screen printing as a scalable and low-cost approach for rigid and flexible thin-film transistors using separated carbon nanotubes, ACS Nano, 8, 12769, 10.1021/nn505979j · DOI · Paper page
- Avuthu, 2016, A screen printed phenanthroline-based flexible electrochemical sensor for selective detection of toxic heavy metal ions, IEEE Sens. J., 16, 8678, 10.1109/JSEN.2016.2572184 · DOI
- Narakathu, 2013, Novel fully screen printed flexible electrochemical sensor for the investigation of electron transfer between thiol functionalized viologen and gold clusters, Sens. Actuators B Chem., 176, 768, 10.1016/j.snb.2012.10.069 · DOI
- Avuthu, S.G.R., Wabeke, J.T., Narakathu, B.B., Maddipatla, D., Eshkeiti, A., Emamian, S., Chlaihawi, A.A., Joyce, M., Obare, S.O., and Atashbar, M.Z. (2015, January 1–4). Development of screen printed electrochemical sensors for selective detection of heavy metals. Proceedings of the IEEE Sensors Conference Proceedings, Busan, Korea. · doi:10.1109/icsens.2015.7370297
- Saeed, 2019, Synthesis of a novel hexaazatriphenylene derivative for the selective detection of copper ions in aqueous solution, RSC Adv., 9, 39824, 10.1039/C9RA08825C · DOI
- Maddipatla, 2020, Incorporating a Novel Hexaazatriphenylene Derivative to a Flexible Screen-Printed Electrochemical Sensor for Copper Ion Detection in Water Samples, IEEE Sens. J., 20, 12582, 10.1109/JSEN.2020.3002811 · DOI
- Emamian, 2017, Screen printing of flexible piezoelectric based device on polyethylene terephthalate (PET) and paper for touch and force sensing applications, Sens. Actuators A Phys., 263, 639, 10.1016/j.sna.2017.07.045 · DOI
- Turkani, 2019, Nickel Based RTD Fabricated via Additive Screen Printing Process for Flexible Electronics, IEEE Access, 7, 37518, 10.1109/ACCESS.2019.2904970 · DOI
- Yoon, 2020, Cost-effective stretchable Ag nanoparticles electrodes fabrication by screen printing for wearable strain sensors, Surf. Coat. Technol., 384, 125308, 10.1016/j.surfcoat.2019.125308 · DOI
- Bose, A.K., Zhang, X., Maddipatla, D., Masihi, S., Panahi, M., Narakathu, B.B., Bazuin, B.J., and Atashbar, M.Z. (2019, January 8–10). Highly Sensitive Screen Printed Strain Gauge for Micro-Strain Detection. Proceedings of the IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), Glasgow, UK. · DOI
- Tian, 2019, All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics, J. Mater. Chem. C, 7, 809, 10.1039/C8TC04753G · DOI
- Bose, 2020, Screen-Printed Strain Gauge for Micro-Strain Detection Applications, IEEE Sens. J., 20, 12652, 10.1109/JSEN.2020.3002388 · DOI
- Cao, 2018, Screen-printed washable electronic textiles as self-powered touch/gesture tribo-sensors for intelligent human–machine interaction, ACS Nano, 12, 5190, 10.1021/acsnano.8b02477 · DOI · Paper page
- Cinti, 2017, Graphene-based screen-printed electrochemical (bio) sensors and their applications: Efforts and criticisms, Biosens. Bioelectron., 89, 107, 10.1016/j.bios.2016.07.005 · DOI · Paper page
- Maddipatla, D., Narakathu, B.B., Bazuin, B.J., and Atashbar, M.Z. (November, January 30). Development of a printed impedance based electrochemical sensor on paper substrate. Proceedings of the IEEE Sensors Conference Proceedings, Orlando, FL, USA.
- Eggenhuisen, 2015, High efficiency, fully inkjet printed organic solar cells with freedom of design, J. Mater. Chem. A, 3, 7255, 10.1039/C5TA00540J · DOI · Paper page
- Corzo, 2019, Digital Inkjet Printing of High-Efficiency Large-Area Nonfullerene Organic Solar Cells, Adv. Mater. Technol., 4, 1900040, 10.1002/admt.201900040 · doi:10.1002/admt.201900040
- (2020, September 15). Focus Label Machinery Launches Digital Inkjet Press. Available online: https://www.labelsandlabeling.com/news/new-products/focus-label-machinery-launches-digital-inkjet-press.
- Ochoa, 2018, A manufacturable smart dressing with oxygen delivery and sensing capability for chronic wound management, Micro Nanotechnol. Sens. Syst. Appl., 10639, 106391C
- Maddipatla, 2019, Rapid prototyping of a novel and flexible paper based oxygen sensing patch via additive inkjet printing process, RSC Adv., 9, 22695, 10.1039/C9RA02883H · DOI
- Mikolajek, 2019, Fabrication and characterization of fully inkjet printed capacitors based on ceramic/polymer composite dielectrics on flexible Substrates, Sci. Rep., 9, 1, 10.1038/s41598-019-49639-3 · doi:10.1038/s41598-019-49639-3
- Li, 2017, Scalable fabrication and integration of graphene micro supercapacitors through full inkjet printing, ACS Nano, 11, 8249, 10.1021/acsnano.7b03354 · DOI · Paper page
- Cao, 2020, Inkjet-printed, self-aligned organic Schottky diodes on imprinted plastic substrates, Flex. Print. Electron., 5, 015006, 10.1088/2058-8585/ab670a · DOI
- Bissannagari, 2019, All inkjet-printed flexible wireless power transfer module: PI/Ag hybrid spiral coil built into 3D NiZn-ferrite trench structure with a resonance capacitor, Nano Energy, 62, 645, 10.1016/j.nanoen.2019.05.075 · doi:10.1016/j.nanoen.2019.05.075
- Narakathu, 2015, Development of a microfluidic sensing platform by integrating PCB technology and inkjet printing process, IEEE Sens. J., 15, 6374, 10.1109/JSEN.2015.2457239 · DOI
- Eshkeiti, 2012, Detection of heavy metal compounds using a novel inkjet printed surface enhanced Raman spectroscopy (SERS) substrate, Sen. Actuators B Chem., 171, 705, 10.1016/j.snb.2012.05.060 · DOI
- Rieu, 2016, Fully inkjet printed SnO2 gas sensor on plastic substrate, Sens. Actuators B Chem., 236, 1091, 10.1016/j.snb.2016.06.042 · DOI
- Li, 2019, A fully inkjet-printed transparent humidity sensor based on a Ti3C2/Ag hybrid for touchless sensing of finger motion, Nanoscale, 11, 21522, 10.1039/C9NR06751E · DOI
- Vuorinen, 2016, Inkjet-printed graphene/PEDOT: PSS temperature sensors on a skin-conformable polyurethane substrate, Sci. Rep., 6, 35289, 10.1038/srep35289 · DOI · Paper page
- Abutarboush, 2018, A reconfigurable inkjet-printed antenna on paper substrate for wireless applications, IEEE Antennas Wirel. Propag. Lett., 17, 1648, 10.1109/LAWP.2018.2861386 · doi:10.1109/lawp.2018.2861386
- Moya, 2017, Inkjet-printed electrochemical sensors, Curr. Opin. Electrochem., 3, 29, 10.1016/j.coelec.2017.05.003 · DOI · Paper page
- Reddy, 2011, Fully printed flexible humidity sensor, Procedia Eng., 25, 120, 10.1016/j.proeng.2011.12.030 · DOI
- Kang, 2014, Fully roll-to-roll gravure printable wireless (13.56 MHz) sensor-signage tags for smart packaging, Sci. Rep., 4, 5387, 10.1038/srep05387 · DOI
- Narakathu, B.B., Eshkeiti, A., Reddy, A.S.G., Rebros, M., Rebrosova, E., Joyce, M.K., Bazuin, B.J., and Atashbar, M.Z. (2012, January 8–31). A novel fully printed and flexible capacitive pressure sensor. Proceedings of the IEEE Sensors Conference Proceedings, Taipei, Taiwan. · doi:10.1109/icsens.2012.6411354
- Maddipatla, 2019, Development of a novel wrinkle-structure based SERS substrate for drug detection applications, Sens. Bio-Sens. Res., 24, 100281, 10.1016/j.sbsr.2019.100281 · DOI
- Zhu, 2014, A gravure printed antenna on shape-stable transparent nanopaper, Nanoscale, 6, 9110, 10.1039/C4NR02036G · DOI
- Fleming, P.D., Bazuin, B., Rebros, M., Hrehorova, E., Joyce, M.K., Pekarovicova, A., and Bliznyuk, V. (2007, January 4–9). Printed Electronics at Western Michigan University. Proceedings of the AIChE’s, 2007 Annual Meeting, Salt Lake City, UT, USA. Available online: http://www.academia.edu/download/45067809/Printed_Electronics_at_Western_Michigan_20160425-1023-1twjp61.pdf.
- (2020, September 10). Workshop to Focus on Mastering Printed Electronics. Available online: https://www.wmich.edu/wmu/news/2010/05/028.shtml.
- Lau, 2013, Fully printed, high performance carbon nanotube thin-film transistors on flexible substrates, Nano Lett., 13, 3864, 10.1021/nl401934a · DOI · Paper page
- Shrestha, 2019, Microwave performance of flexo-printed chipless RFID tags, Flex. Print. Electron., 4, 045003, 10.1088/2058-8585/ab4b09 · doi:10.1088/2058-8585/ab4b09
- Gordon, S.E., Dorfman, J.R., Kirk, D., and Adams, K. (2011, January 9–13). Advances in Conductive Inks across Multiple Applications and Deposition Platforms. DuPont Microcircuit Materials. Proceedings of the IEEE Photonics Conference, Arlington, VA, USA. Available online: https://smtnet.com/library/files/upload/Conductive-Inks-Advances.pdf.
- Benson, 2015, Direct patterning of gold nanoparticles using flexographic printing for biosensing applications, Nanoscale Res. Lett., 10, 1, 10.1186/s11671-015-0835-1 · doi:10.1186/s11671-015-0835-1
- Fung, 2017, Facile fabrication of electrochemical ZnO nanowire glucose biosensor using roll to roll printing technique, Sens. Actuators B Chem., 247, 807, 10.1016/j.snb.2017.03.105 · doi:10.1016/j.snb.2017.03.105
- Tian, 2010, Liquid marble for gas sensing, Chem. Commun., 46, 4734, 10.1039/c001317j · DOI
- Hoekstra, 2019, Air-curable, high-resolution patternable oxetane-based liquid crystalline photonic films via flexographic printing, ACS Appl. Mater. Interfaces, 11, 7423, 10.1021/acsami.8b21464 · doi:10.1021/acsami.8b21464
- Higuchi, 2013, High-mobility, flexible carbon nanotube thin-film transistors fabricated by transfer and high-speed flexographic printing techniques, Appl. Phys. Express, 6, 085101, 10.7567/APEX.6.085101 · doi:10.7567/apex.6.085101
- Bellmann, 2012, Fully mass printed loudspeakers on paper, Org. Electron., 13, 2290, 10.1016/j.orgel.2012.06.048 · doi:10.1016/j.orgel.2012.06.048
- Maddipatla, D., Narakathu, B.B., Avuthu, S.G.R., Emamian, S., Eshkeiti, A., Chlaihawi, A.A., Bazuin, B.J., Joyce, M.K., Barrett, C.W., and Atashbar, M.Z. (2015, January 1–4). A novel flexographic printed strain gauge on paper platform. Proceedings of the IEEE Sensors Conference Proceedings, Busan, Korea. · doi:10.1109/icsens.2015.7370606
- Joannou, G. (1988). The Printing Ink Manual—Screen Inks, Springer. · doi:10.1007/978-94-011-7097-0_9
- Li, 2019, Deposited Nanoparticles Can Promote Air Clogging of Piezoelectric Inkjet Printhead Nozzles, Langmuir, 35, 5517, 10.1021/acs.langmuir.8b04335 · doi:10.1021/acs.langmuir.8b04335
- Martin, 2008, March. Inkjet printing-the physics of manipulating liquid jets and drops, J. Phys. Conf. Ser., 105, 012001, 10.1088/1742-6596/105/1/012001 · DOI · Paper page
- Su, 2020, Printable, Highly Sensitive Flexible Temperature Sensors for Human Body Temperature Monitoring: A Review, Nanoscale Res. Lett., 15, 1, 10.1186/s11671-020-03428-4 · DOI · Paper page
- Elgeneidy, 2018, Directly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators, Front. Robot. AI, 5, 2, 10.3389/frobt.2018.00002 · DOI
- Chen, 2019, A Review of Printable Flexible and Stretchable Tactile Sensors, Research, 2019, 1
- Windmiller, 2013, Wearable Electrochemical Sensors and Biosensors: A Review, Electroanalysis, 25, 29, 10.1002/elan.201200349 · DOI · Paper page
Cited by
Wiklund, J., Karakoç, A., Palko, T., Yiğitler, H., Ruttik, K., Jäntti, R., & Paltakari, J. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp5030089 · Cited by 315
Orchestrating a smart circular economy: Guiding principles for digital product passports
Langley, D. J., Rosca, E., Angelopoulos, M., Kamminga, O., & Hooijer, C. (2023) · Journal of Business Research · doi:10.1016/j.jbusres.2023.114259 · Cited by 231
Metadata
- Authors
- Maddipatla, D., Narakathu, B. B., & Atashbar, M.
- Venue
- Biosensors
- Publisher
- MDPI AG
- Published
- 2020-12-03
- Volume
- 10
- Issue
- 12
- Pages
- 199
- ISSN
- 2079-6374 (ISSN-L)
- OpenAlex
- W3108805753
- Cited by
- 170
- References
- 8
- FWCI
- 7.26
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent Progress in Manufacturing Techniques of Printed and Flexible Sensors: A Review. https://app.cochat.ai/papers/10.3390/bios10120199
- The paper
- Maddipatla, D., Narakathu, B. B., & Atashbar, M. (2020). Recent Progress in Manufacturing Techniques of Printed and Flexible Sensors: A Review. Biosensors. https://doi.org/10.3390/bios10120199
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.