Cosmetic Packaging to Save the Environment: Future Perspectives
Open accessThe DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Abstract
Consumer awareness about the damages that plastic packaging waste cause to the environment, coupled with bio-economy and circular economy policies, are pushing plastic packaging versus the use of bio-based and biodegradable materials. In this contest, even cosmetic packaging is looking for sustainable solutions, and research is focusing on modifying bio-based and biodegradable polymers to meet the challenging requirements for cosmetic preservation, while maintaining sustainability and biodegradability. Several bio-based and biodegradable polymers such as poly(lactic acid), polyhydroxyalkanoates, polysaccharides, etc., are available, and some first solutions for both rigid and flexible packaging are already present on the market, while many others are under study and optimization. A fruitful cooperation among researchers and industries will drive the cosmetic sector toward being more ecological and contributing to save our environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Plastics remain indispensable in cosmetic packaging due to their versatility, durability, and costeffectiveness, offering properties such as transparency, softness, heat sealability, and an optimal strength-to-weight ratio [107].”
From Advancing Cosmetic Sustainability: Upcycling for a Circular Product Life Cycle (2025) · cites this paper as [107]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Cosmetic packaging predominantly relies on petrochemical-derived polymers like poly(ethylene terephthalate) (PET), poly(vinyl chloride) (PVC), poly(ethylene) (PE), poly(propylene) (PP), poly(styrene) (PS), and poly(amide) (PA).”
From Advancing Cosmetic Sustainability: Upcycling for a Circular Product Life Cycle (2025) · cites this paper as [107]
The cited source says what the claim attributes to it.
In the citing paper
“When it comes to cosmetic packaging, recycling is very often impractical due to the presence of “greasy” products, which are challenging to remove through simple washing processes [10].”
From On the Path to Sustainable Cosmetics: Development of a Value-Added Formulation of Solid Shampoo Incorporating Mango Peel Extract (2023) · cites this paper as [10]
The cited source says what the claim attributes to it.
In the citing paper
“Despite the existence of waste management systems, plastic packaging is the most often used option in the industry due to its flexibility and light weight [46,47].”
From Use of Waste from the Food Industry and Applications of the Fermentation Process to Create Sustainable Cosmetic Products: A Review (2024) · cites this paper as [47]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Models for the Permeability of Filled Polymer Systems
Nielsen, L. E. (1967) · Journal of Macromolecular Science: Part A - Chemistry · doi:10.1080/10601326708053745 · Cited by 1,127
Study on antimicrobial activity of chitosan with different molecular weights
Zheng, L.-Y., & Zhu, J.-F. (2003) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.07.009 · Cited by 1,030
Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 943
Self-citationDevlieghere, F., Vermeulen, A., & Debevere, J. (2004) · Food Microbiology · doi:10.1016/j.fm.2004.02.008 · Cited by 908 · cited 1×
“For these reasons, chitosan is largely used in many applications such as coatings to fruit and vegetables [67], meat [68], cheese [69], and sea-food [70].”
BackgroundRecent developments in antibacterial and antifungal chitosan and its derivatives
Verlee, A., Mincke, S., & Stevens, C. V. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.001 · Cited by 843
Model polymer nanocomposites provide an understanding of confinement effects in real nanocomposites
Rittigstein, P., Priestley, R. D., Broadbelt, L. J., & Torkelson, J. M. (2007) · Nature Materials · doi:10.1038/nmat1870 · Cited by 691
Signori, F., Coltelli, M.-B., & Bronco, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.004 · Cited by 503
Self-citationApplication of Edible Coatings on Meats, Poultry and Seafoods: A Review
Gennadios, A., Hanna, M. A., & Kurth, L. B. (1997) · LWT - Food Science and Technology · doi:10.1006/fstl.1996.0202 · Cited by 461
Plasticized starch–cellulose interactions in polysaccharide composites
Avérous, L., Fringant, C., & Moro, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00125-2 · Cited by 343
Pantani, R., & Sorrentino, A. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.01.005 · Cited by 315
Bioplastics and food packaging: A review
Jabeen, N., Majid, I., & Nayik, G. A. (2015) · Cogent Food & Agriculture · doi:10.1080/23311932.2015.1117749 · Cited by 288
Volova, T. G., Boyandin, A. N., Vasiliev, A. D., Karpov, V. A., Prudnikova, S. V., Mishukova, O. V., Boyarskikh, U. A., Filipenko, M. L., Rudnev, V. P., Bá Xuân, B., et al. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.08.023 · Cited by 275
Mensitieri, G., Di Maio, E., Buonocore, G. G., Nedi, I., Oliviero, M., Sansone, L., & Iannace, S. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2010.10.001 · Cited by 218 · cited 3×
“These starch-based thermoplastic materials have found wider industrial applications ra ging from extrusion applications, injection molding, blow molding, film blowing, and foaming [63,64].”
BackgroundDemirgöz, D., Elvira, C., Mano, J. F., Cunha, A. M., Piskin, E., & Reis, R. L. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00102-6 · Cited by 184
Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA)
Aliotta, L., Cinelli, P., Coltelli, M. B., Righetti, M. C., Gazzano, M., & Lazzeri, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.041 · Cited by 183
Self-citationAlvarenga, P., Palma, P., Gonçalves, A. P., Fernandes, R. M., Cunha-Queda, A. C., Duarte, E., & Vallini, G. (2007) · Environment International · doi:10.1016/j.envint.2006.11.006 · Cited by 170
Yu, J., & Chen, L. X. L. (2008) · Environmental Science & Technology · doi:10.1021/es7032235 · Cited by 168
Zhong, Y., Cavender, G., & Zhao, Y. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2013.11.006 · Cited by 165
Chitosan coatings enriched with active shrimp waste for shrimp preservation
Arancibia, M. Y., López-Caballero, M. E., Gómez-Guillén, M. C., & Montero, P. (2015) · Food Control · doi:10.1016/j.foodcont.2015.02.004 · Cited by 139
Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 135
Self-citationColtelli, M., Bronco, S., & Chinea, C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.015 · Cited by 132
Self-citationMallegni, N., Phuong, T., Coltelli, M.-B., Cinelli, P., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11010148 · Cited by 128
Self-citationFortunati, E., Armentano, I., Iannoni, A., Barbale, M., Zaccheo, S., Scavone, M., Visai, L., & Kenny, J. M. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.35039 · Cited by 123
Aliotta, L., Cinelli, P., Coltelli, M., & Lazzeri, A. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.12.042 · Cited by 120
Self-citationHigueras, L., López‐Carballo, G., Hernández‐Muñoz, P., Catalá, R., & Gavara, R. (2014) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2014.07.018 · Cited by 118
Compatible blends of biorelated polyesters through catalytic transesterification in the melt
Coltelli, M., Toncelli, C., Ciardelli, F., & Bronco, S. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.01.028 · Cited by 109
Self-citationMlalila, N., Hilonga, A. H., Swai, H., Devlieghere, F., & Ragaert, P. (2018) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2018.01.015 · Cited by 109
Seawater accelerated ageing of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
Deroiné, M., Duigou, A. L., Corre, Y., Gac, P. L., Davies, P., César, G., & Bruzaud, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.04.026 · Cited by 108
Coltelli, M., Cinelli, P., Gigante, V., Aliotta, L., Morganti, P., Panariello, L., & Lazzeri, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20030504 · Cited by 107
Self-citationPhuong, V. T., Coltelli, M., Cinelli, P., Cifelli, M., Verstichel, S., & Lazzeri, A. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.070 · Cited by 101
Self-citationValenzuela, C., V, Tapia, C., López, L. E., Andrea Bunger, T., Escalona, V. H., & Abugoch, L. E. (2015) · Electronic Journal of Biotechnology · doi:10.1016/j.ejbt.2015.09.001 · Cited by 94
Biodegradable double‐layer films based on biological resources: Polyhydroxybutyrate and cellulose
Cyras, V. P., Commisso, M. S., Mauri, A. N., & Vázquez, A. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26663 · Cited by 93
Cellulose Acetate Blends - Effect of Plasticizers on Properties and Biodegradability
Phuong, V. T., Verstichel, S., Cinelli, P., Anguillesi, I., Coltelli, M., & Lazzeri, A. (2014) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2013.634136 · Cited by 78
Self-citationImpact of polylactate and poly(hydroxybutyrate) on food quality
Haugaard, V. K., Danielsen, B., & Bertelsen, G. (2003) · European Food Research and Technology · doi:10.1007/s00217-002-0651-6 · Cited by 76
A New Carrier for Advanced Cosmeceuticals
Morganti, P., & Coltelli, M. (2019) · Cosmetics · doi:10.3390/cosmetics6010010 · Cited by 76
Self-citationUse of nanoclay platelets in food packaging materials: technical and cytotoxicity approach
Jordá-Beneyto, M., Ortuño, N., Devís, A., Aucejo, S., Puerto, M., Gutiérrez‐Praena, D., Houtman, J., Pichardo, S., Maisanaba, S., & Jos, A. M. (2013) · Food Additives & Contaminants Part A · doi:10.1080/19440049.2013.874045 · Cited by 67
Some Properties ofPoly(3-hydroxybutyrate)-Poly(3-hydroxyvalerate) Blends
Gassner, F., & Owen, A. J. (1996) · Polymer International · doi:10.1002/(sici)1097-0126(199603)39:3<175::aid-pi472>3.0.co;2-0 · Cited by 66
Iñiguez‐Franco, F., Auras, R. A., Rubino, M. I., Dolan, K. D., Soto‐Valdez, H., & Selke, S. E. M. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.004 · Cited by 63
Seggiani, M., Cinelli, P., Balestri, E., Mallegni, N., Stefanelli, E., Rossi, A., Lardicci, C., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11050772 · Cited by 63
Self-citationCytotoxicity and mutagenicity assessment of organomodified clays potentially used in food packaging
Maisanaba, S., Prieto, A. I., Pichardo, S., Jordá-Beneyto, M., Aucejo, S., & Jos, A. M. (2015) · Toxicology in Vitro · doi:10.1016/j.tiv.2015.03.010 · Cited by 62
Thermal Properties of Plasticized Poly (Lactic Acid) (PLA) Containing Nucleating Agent
Fehri, S. M. K., Cinelli, P., Coltelli, M., Anguillesi, I., & Lazzeri, A. (2015) · International Journal of Chemical Engineering and Applications · doi:10.7763/ijcea.2016.v7.548 · Cited by 62
Self-citationGigante, V., Aliotta, L., Phuong, V. T., Coltelli, M., Cinelli, P., & Lazzeri, A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.09.008 · Cited by 58
Self-citationPanariello, L., Coltelli, M., Buchignani, M., & Lazzeri, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.004 · Cited by 55
Self-citationChiellini, E., Cinelli, P., Ilieva, V. I., Imam, S. H., & Lawton, J. W. (2009) · Journal of Cellular Plastics · doi:10.1177/0021955x08099932 · Cited by 51
Self-citationScatto, M., Salmini, E., Castiello, S., Coltelli, M., Conzatti, L., Stagnaro, P., Andreotti, L., & Bronco, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38042 · Cited by 48
Self-citationPhysico-Mechanical Properties of Biodegradable Rubber Toughened Polymers
Farsetti, S., Cioni, B., & Lazzeri, A. (2011) · Macromolecular Symposia · doi:10.1002/masy.201150311 · Cited by 48
Self-citationMorganti, P., Fusco, A., Paoletti, I., Perfetto, B., Ciotto, P. D., Palombo, M., Chianese, A., Baroni, A., & Donnarumma, G. (2017) · Materials · doi:10.3390/ma10070843 · Cited by 47
Self-citationFacts, Growth, and Opportunities in Industrial Biotechnology
Singh, R. R. (2010) · Organic Process Research & Development · doi:10.1021/op100312a · Cited by 44
Coltelli, M., Mallegni, N., Rizzo, S., Cinelli, P., & Lazzeri, A. (2019) · Materials · doi:10.3390/ma12020270 · Cited by 43
Self-citationToughening of poly(3-hydroxybutyrate) with poly(cis-1,4-isoprene)
Yoon, J., Lee, W.-S., Jin, H., Chin, I.-J., Kim, M.-N., & Go, J. (1999) · European Polymer Journal · doi:10.1016/s0014-3057(98)00068-8 · Cited by 42
Chitin and lignin to produce biocompatible tissues
Morganti, P., Danti, S., & Coltelli, M. (2018) · doi:10.35841/clinical-dermatology.1.1.5-11 · Cited by 42
Self-citationPreparation of Innovative Skin Compatible Films to Release Polysaccharides for Biobased Beauty Masks
Coltelli, M., Danti, S., Trombi, L., Morganti, P., Donnarumma, G., Baroni, A., Fusco, A., & Lazzeri, A. (2018) · Cosmetics · doi:10.3390/cosmetics5040070 · Cited by 39
Self-citationFehri, M. K., Mugoni, C., Cinelli, P., Anguillesi, I., Coltelli, M., Fiori, S., Montorsi, M., & Lazzeri, A. (2016) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2016.26 · Cited by 37
Self-citationPhuong, V. T., Gigante, V., Aliotta, L., Coltelli, M., Cinelli, P., & Lazzeri, A. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.12.013 · Cited by 34
Self-citationDegradability and sustainability of nanocomposites based on polylactic acid and chitin nano fibrils
Cinelli, P., Coltelli, M., Mallegni, N., Morganti, P., & Lazzeri, A. (2017) · Chemical engineering transactions · doi:10.3303/cet1760020 · Cited by 32
Self-citationPinsino, A., Bastús, N. G., Busquets‐Fité, M., Canesi, L., Cesaroni, P., Drobne, D., Duschl, A., Ewart, M., Gispert, I., Horejs‐Hoeck, J., et al. (2020) · Environmental Science Nano · doi:10.1039/d0en00732c · Cited by 28
Castiello, S., Coltelli, M., Conzatti, L., & Bronco, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36313 · Cited by 18
Self-citationChen, Y., Tsai, Y., Chou, I., Tseng, S., & Wu, H. (2014) · International Journal of Polymer Science · doi:10.1155/2014/789681 · Cited by 18
Chitin nanofibrils in renewable materials for packaging and personal care applications
Coltelli, M., Gigante, V., Panariello, L., Aliotta, L., Morganti, P., Danti, S., Cinelli, P., & Lazzeri, A. (2019) · Advanced Materials Letters · doi:10.5185/amlett.2019.2250 · Cited by 18
Self-citationNanocomposites Based on Phyllosilicates: From Petrochemicals to Renewable Thermoplastic Matrices
Coltelli, M., Coiai, S., Bronco, S., & Passaglia, E. (2009) · Wiley eBooks · doi:10.1002/9783527628940.ch13 · Cited by 17
Self-citationZhang, P., He, Y., Gao, D., Cai, Y., & Liu, B. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46933 · Cited by 17
Protective Coatings for Shelf Life Extension of Fru its and Vegetables
Said, P. P., Pradhan, R. C., Sharma, N., & Naik, B. (2013) · Cited by 10
Investigation of mechanical properties the polylactide in function its degradation rate
Andrzejewska, A., Mazurkiewicz, A., & Ligaj, B. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/393/1/012033 · Cited by 7
Research works printed but not linked: 2
- Ehilen, O.; Obadoni, B.; Imade, F.; Eseigbe, D.; Mensah, J.K. The Effect of Detergents on the Germination and Growth of Amaranthus hybridus L. and Solanum lycopersicon L. Niger. Ann. Natural Sci. 2017, 16, 100-108.
- Fatoba, P.O.; Olorunmaiye, K.S.; Adepoju, A.O. Effects of soaps and detergents wastes on seed germination, flowering and fruiting of tomato (Lycopersico nesculentum) and Okra (Abelmoschus esculentus) plants. Ecol. Environ. Conserv. 2011, 17, 7-11.
Cited by
Green Consumer Behavior in the Cosmetics Market
Amberg, N., & Fogarassy, C. (2019) · Resources · doi:10.3390/resources8030137 · Cited by 417
Overview of Bioplastic Introduction and Its Applications in Product Packaging
Ibrahim, N. I., Shahar, F. S., Sultan, M. T. H., Shah, A. U. M., Safri, S. N. A., & Mat Yazik, M. H. (2021) · Coatings · doi:10.3390/coatings11111423 · Cited by 201
Afshar, S. V., Boldrin, A., Astrup, T. F., Daugaard, A. E., & Hartmann, N. B. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.140000 · Cited by 201
A sustainable life cycle for cosmetics: from design and development to post-use phase
Martins, A. M., & Marto, J. M. (2023) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2023.101178 · Cited by 160
Venkatesh, G. (2021) · Circular Economy and Sustainability · doi:10.1007/s43615-021-00084-3 · Cited by 171
Metadata
- Authors
- Cinelli, P., Coltelli, M., Signori, F., Morganti, P., & Lazzeri, A.
- Affiliations
- University of Pisa (IT)
- University of Campania "Luigi Vanvitelli" (IT)
- Corresponding author
- Cinelli, Patrizia
- Coltelli, Maria
- Venue
- Cosmetics
- Publisher
- MDPI AG
- Published
- 2019-04-15
- Volume
- 6
- Issue
- 2
- Pages
- 26
- ISSN
- 2079-9284 (ISSN-L)
- OpenAlex
- W2937592230
- Cited by
- 128
- References
- 66
- Citations by year
- 2026: 17 · 2025: 19 · 2024: 27 · 2023: 23 · 2022: 14 · 2021: 17 · 2020: 10 · 2019: 1
- FWCI
- 2.98
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Cosmetics (publishedVersion, cc-by)
- CINECA IRIS Institutial research information system (University of Pisa) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Horizon 2020 Framework Programme (745839)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cosmetic packaging, plastic packaging waste, bio-based polymers, biodegradable polymers, polylactic acid, polyhydroxyalkanoates, polysaccharides, cosmetic preservation, circular economy, bioeconomy, sustainable packaging
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.