A Concept of Risk Prioritization in FMEA Analysis for Fluid Power Systems
Open accessThe DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
FMEA analysis is a tool of quality improvement that has been widely used for decades. Its classical version prioritizes risk of failure by risk priority number (RPN). The RPN is a product of severity (S), occurrence (O), and detection (D), where all of the factors have equal levels of significance. This assumption is one of the most commonly criticized drawbacks, as it has given unreasonable results for real-world applications. The RPN can produce equal values for combinations of risk factors with different risk implications. Another issue is that of the uncertainties and subjectivities of information employed in FMEA analysis that may arise from lack of knowledge, experience, and employed linguistic terms. Many alternatives of risk assessment methods have been proposed to overcome the weaknesses of classical FMEA risk management in which we can distinguish methods of modification of RPN numbers of employing new tools. In this study, we propose a modification of the traditional RPN number. The main difference is that severity and occurrence are valued based on subfactors. The detection number remained unchanged. Additionally, the proposed method prioritizes risk in terms of implied risk to the systems by implementing functional failures (effects of potential failures). A typical fluid power system was used to illustrate the application of this method. The method showed the correct failure classification, which meets the industrial experience and other research results of failures of fluid power systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“On the other hand, Fabiś-Domagała et al. highlight that applying the AIAG & VDA (2019) methodology in pneumatic and hydraulic systems requires redefining the criteria for severity, occurrence, and detectability, with reference to the specific functions of each subsystem [20].”
From An Intelligent Framework for Implementing AIAG–VDA FMEA and Action Priority (AP) Assessment (2026) · cites this paper as [20]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Risk evaluation approaches in failure mode and effects analysis: A literature review
Liu, H.-C., Liu, L., & Liu, N. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.08.010 · Cited by 965 · cited 1×
“All shortcomings of traditional FMEA analysis are widely summarized in previous work [8].”
MethodRisk assessment of the operations of maritime autonomous surface ships
Chang, C.-H., Kontovas, C., Yu, Q., & Yang, Z. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107324 · Cited by 316
Liu, H.-C., Chen, X.-Q., Duan, C.-Y., & Wang, Y.-M. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.06.055 · Cited by 262 · cited 1×
“Modification of classical RPN by implementing customer perspective [10], performing risk evaluation in terms of risk factors and their implication to risk scenario [11], other factors [9].”
BackgroundCarlson, C. S. (2012) · Wiley eBooks · doi:10.1002/9781118312575 · Cited by 236 · cited 2×
“The FMEA method was an inspiration for other methods and tools such as RCM (reliability center management), concept FMEA and FMEDA [7].”
MethodA novel multiple-criteria decision-making-based FMEA model for risk assessment
Lo, H.-W., & Liou, J. J. H. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.09.020 · Cited by 231 · cited 1×
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundQin, J., Xi, Y., & Pedrycz, W. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2020.106134 · Cited by 194
Li, Z., & Chen, L. (2018) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2018.10.005 · Cited by 142
Başhan, V., Demirel, H., & Gül, M. (2020) · Soft Computing · doi:10.1007/s00500-020-05108-y · Cited by 132 · cited 2×
“Distance-based methods: • distance operator; • technique for order of preference by similarity to ideal solution (TOPSIS) [27]; • multiattributive border approximation area comparison (MACBAC) [28]; • shortest distance algorithms [29].”
BackgroundFailure Mode and Effects Analysis by Using the House of Reliability-Based Rough VIKOR Approach
Wang, Z., Gao, J.-M., Wang, R.-X., Chen, K., Gao, Z.-Y., & Zheng, W. (2018) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2778316 · Cited by 105 · cited 1×
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundYener, Y., & Can, G. F. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.115413 · Cited by 69
Research works printed but not linked: 4
- Biswas, 2019, An ensemble approach for portfolio selection in a mutli-criteria descision making framework, Decis. Making Appl. Manag. Eng., 2, 138
- Aggarwal, K.K. (1993). Reliability Engineering, Springer Science+Business Media.
- Han, J. (2012). Data Mining, Morgan Kaufmann. [3rd ed.].
- Watton, J. (2007). Modelling, Monitoring and Diagnostic Techniques for Fluid Power Systems, Springer.
Cited by
Risk prioritization using a modified FMEA analysis in industry 4.0
Salah, B., Alnahhal, M., & Ali, M. (2023) · Journal of Engineering Research · doi:10.1016/j.jer.2023.07.001 · Cited by 65
Akhtar, M. J., Naseem, A., & Ahsan, F. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107876 · Cited by 45
Towards Trustworthy Safety Assessment by Providing Expert and Tool-Based XMECA Techniques
Babeshko, I., Illiashenko, O. A., Kharchenko, V. S., & Leontiiev, K. (2022) · Mathematics · doi:10.3390/math10132297 · Cited by 28
Comprehensive technical risk indices and advanced methodologies for power system risk management
Yaghoubi, E., Yaghoubi, E., Maghami, M. R., & Jahromi, M. Z. (2025) · Electric Power Systems Research · doi:10.1016/j.epsr.2025.111534 · Cited by 25
A Concept of Risk Prioritization in FMEA of Fluid Power Components
Fabiś-Domagała, J., & Domagała, M. (2022) · Energies · doi:10.3390/en15176180 · Cited by 22
Bognár, F., & Hegedűs, C. (2022) · Mathematics · doi:10.3390/math10050676 · Cited by 21
Energy Savings in Hydraulic Hybrid Transmissions through Digital Hydraulics Technology
Azzam, I., Pate, K., Garcia-Bravo, J. M., & Breidi, F. (2022) · Energies · doi:10.3390/en15041348 · Cited by 18
“These advantages make fluid power technology convenient for performing crucial operations that require high power density and reliability, like heavy-duty applications, e.g., construction vehicles, material handling equipment, and military operations [5].”
BackgroundIvančan, J., Lisjak, D., Pavletić, D., & Kolar, D. (2023) · Machines · doi:10.3390/machines11070739 · Cited by 16
The Influence of Oil Contamination on Flow Control Valve Operation
Domagała, M. (2022) · Materials research proceedings · doi:10.21741/9781644902059-1 · Cited by 11
Azzam, I., Pate, K., Breidi, F., Choi, M., Jiang, Y., & Mousas, C. (2023) · Actuators · doi:10.3390/act12110419 · Cited by 11
“Given all these advantages, hydraulic systems are ideal for applications requiring high reliability, fast energy capture, and accuracy operations like construction vehicles, material handling equipment, military operations, and other high-actuation power applications [6].”
BackgroundAutomated method for selecting optimal digital pump operating strategy
Azzam, I., Hwang, J., Breidi, F., Lumkes, J., & Salem, T. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.120509 · Cited by 11
Uncertainty Management in Assessment of FMEA Expert Based on Negation Information and Belief Entropy
Wu, L., Tang, Y., Zhang, L., & Huang, Y. (2023) · Entropy · doi:10.3390/e25050800 · Cited by 9
“It has been widely used in many applications, such as decision making [18–20], classification [21], fault diagnosis [22–25], risk evaluation [26–28], and so on [29,30].”
MethodAnes, V., & Abreu, A. J. P. D. C. F. (2024) · Algorithms · doi:10.3390/a17120585 · Cited by 8
“While effective, this approach suffers from subjectivity in the assignment of S, O, and D values and a lack of sensitivity to uncertainties inherent in complex systems [17].”
Wiangkham, A., & Vongvit, R. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.109128 · Cited by 7
Priyanta, D., Zaman, M. B., & Semin, S. (2024) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1423/1/012010 · Cited by 5
“The proposed modified RPN calculation divides severity and occurrence into subfactors, providing a more realistic evaluation of risk and enhancing oil pump safety and reliability [28].”
Degradation of R35 Steel in 5% NaCl environment at 10°C
LIPIŃSKI, T. (2023) · Materials research proceedings · doi:10.21741/9781644902691-10 · Cited by 5
Montero-Díaz, F., Valle, A. T., & Jáuregui-Haza, U. J. (2025) · Applied Sciences · doi:10.3390/app15179517 · Cited by 4
Advances in Fluid Power Systems
Dindorf, R. F., Takosoglu, J., & Woś, P. (2021) · Energies · doi:10.3390/en14248589 · Cited by 3
“presented a FMEA analysis as a quality improvement tool that has been widely used for decades [12].”
MethodCritical Logistic Loss in FPSO-Tanker Transfer Process: Multistakeholder FMEA Risk Analysis
Palippui, H., Rosyid, D. M., Silvianita, & Sade, J. (2025) · Journal of Ocean Engineering and Technology · doi:10.26748/ksoe.2025.043 · Cited by 2
“The risk level of each failure mode was calculated using the standard risk priority number (RPN) formula first proposed by Fabis-Domagala et al. (2021): Where S represents the potential severity of failure, O reflects the likelihood of occurrence, and D refers to the probability of detection before…”
İki Aşamalı Risk Değerlendirme Yöntemi ile Havacılık Sektöründe Uygulama
Ervural, B. Ç. (2023) · International Journal of Advances in Engineering and Pure Sciences · doi:10.7240/jeps.1346513 · Cited by 2
Complaint Analysis as Part of Service Quality and Safety Management
Ingaldi, M. K. (2023) · Materials research proceedings · doi:10.21741/9781644902691-33 · Cited by 2
Addressing Uncertainty in Digital Risk Evaluation Using a Fuzzy-FMEA MethodologyPreprint
Naciri, L., Merzouk, S., Gallab, M., Nardo, M. D., & Soulhi, A. (2025) · Research Square · doi:10.21203/rs.3.rs-6423322/v1 · Cited by 2
An Intelligent Framework for Implementing AIAG–VDA FMEA and Action Priority (AP) Assessment
Oancea, A.-V., Ionescu, L.-M., Rontescu, C., Ionescu, N., Misztal, A., Bogatu, A.-M., Știrbu, C., Cicic, D.-T., & Stanciu, E.-M. (2026) · Applied Sciences · doi:10.3390/app16052591 · Cited by 1
Wang, C.-N., Thanh-Tam, T., & Truong, D.-C. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18392-z · Cited by 1
An Application of the Systematic Diagram in the Failure and Causes Analysis of a Vane Pump
Fabiś-Domagała, J. (2023) · Materials research proceedings · doi:10.21741/9781644902691-25 · Cited by 1
KUCHARCZYK, A. (2022) · Materials research proceedings · doi:10.21741/9781644902059-17
Kierat, O. (2022) · Materials research proceedings · doi:10.21741/9781644902059-20
Numerical Analysis of a Pneumatic Cushion Operation Safety, including the Airflow Conditions
Filo, G. (2023) · Materials research proceedings · doi:10.21741/9781644902691-28
“Therefore, it is necessary to develop scenarios for potential failures [17-19], prevent them, and mitigate their consequences when they occur.”
BackgroundShah, A., Shea, R., & Siskowski, B. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-26-0410
Liska, I. K. W. K., Dewi, A. A. I. S. K., & Setiawati, N. L. P. L. S. (2025) · Heuristic · doi:10.30996/heuristic.v21i2.11827
Increasing Lifetime of Tubing Pump with Sand Problem in Field X Zona 1 Pt Pertamina EP
Suryantoro, R. W., & Siallagan, M. (2025) · European Journal of Business Management and Research · doi:10.24018/ejbmr.2025.10.2.2611
Quality Management in the Production Process Using Failure Mode and Effect Analysis: A Case Study
Dąbrowska, M., Wysocka, D., Srikhumsuk, P., & Husár, J. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-3-032-01517-4_24
Occupational Safety Risk Analysis in The Textile Sector with FMEA and Fuzzy Logic: Part II
KODALOĞLU, M., & KODALOĞLU, F. A. (2026) · Uluborlu Mesleki Bilimler Dergisi · doi:10.71445/umbd.1746552
Analisis Kerusakan Komponen Kritis pada Mesin Slitting dengan Pendekatan FMEA
Fandeli, H., & Rezkita, S. A. (2026) · Jurnal Andalas Rekayasa dan Penerapan Teknologi · doi:10.25077/jarpet.v6i1.136
Funke, F., Reinstaller, S., Kearney, K., Muschalla, D., Ertl, T., & Kleidorfer, M. (2026) · Journal of Hydrology Regional Studies · doi:10.1016/j.ejrh.2026.103667
FURTHER CRITERIA FOR FMEA PRIORITIZATION
Barsalou, M. A. (2026) · Proceedings on Engineering Sciences · doi:10.24874/pes08.02.017
Information technology procurement risk management in fast moving consumer goods industry
Yovita, F. J., & Andika, A. (2025) · Jurnal Mantik
Putri, T. S. A. (2026) · UMM Institutional Repository (University of Maine at Machias)
Naseem, A., Awan, O. A., Shahzad, A., Mahmood, M., Akhtar, M. J., & Ali, S. (2026) · Quality and Reliability Engineering International · doi:10.1002/qre.70475
Metadata
- Authors
- Fabis-Domagala, J., Domagala, M., & Momeni, H.
- Affiliations
- Faculty of Mechanical Engineering, Cracow University of Technology, Al. Jana Pawla II 37, 31-864 Cracow, Poland
- Western Norway University of Applied Sciences (NO)
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2021-10-10
- Volume
- 14
- Issue
- 20
- Pages
- 6482
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W3207632557
- Cited by
- 31
- References
- 30
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 3 · 2023: 11 · 2022: 7 · 2021: 1
- FWCI
- 4.12
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- NORA - Norwegian Open Research Archives (submittedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Risk and Safety Analysis
- Social Sciences › Business, Management and Accounting › Strategy and Management › Management Systems and Quality Improvement
- Keywords
- failure mode and effects analysis, risk prioritization, risk priority number, fluid power systems, failure classification, risk assessment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.