A Concept of Risk Prioritization in FMEA Analysis for Fluid Power Systems
Open accessThe DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
FMEA analysis is a tool of quality improvement that has been widely used for decades. Its classical version prioritizes risk of failure by risk priority number (RPN). The RPN is a product of severity (S), occurrence (O), and detection (D), where all of the factors have equal levels of significance. This assumption is one of the most commonly criticized drawbacks, as it has given unreasonable results for real-world applications. The RPN can produce equal values for combinations of risk factors with different risk implications. Another issue is that of the uncertainties and subjectivities of information employed in FMEA analysis that may arise from lack of knowledge, experience, and employed linguistic terms. Many alternatives of risk assessment methods have been proposed to overcome the weaknesses of classical FMEA risk management in which we can distinguish methods of modification of RPN numbers of employing new tools. In this study, we propose a modification of the traditional RPN number. The main difference is that severity and occurrence are valued based on subfactors. The detection number remained unchanged. Additionally, the proposed method prioritizes risk in terms of implied risk to the systems by implementing functional failures (effects of potential failures). A typical fluid power system was used to illustrate the application of this method. The method showed the correct failure classification, which meets the industrial experience and other research results of failures of fluid power systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“On the other hand, Fabiś-Domagała et al. highlight that applying the AIAG & VDA (2019) methodology in pneumatic and hydraulic systems requires redefining the criteria for severity, occurrence, and detectability, with reference to the specific functions of each subsystem [20].”
From An Intelligent Framework for Implementing AIAG–VDA FMEA and Action Priority (AP) Assessment (2026) · cites this paper as [20]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Risk evaluation approaches in failure mode and effects analysis: A literature review
Liu, H.-C., Liu, L., & Liu, N. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.08.010 · Cited by 965 · cited 1×
“All shortcomings of traditional FMEA analysis are widely summarized in previous work [8].”
MethodRisk assessment of the operations of maritime autonomous surface ships
Chang, C.-H., Kontovas, C., Yu, Q., & Yang, Z. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107324 · Cited by 316
Liu, H.-C., Chen, X.-Q., Duan, C.-Y., & Wang, Y.-M. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.06.055 · Cited by 262 · cited 1×
“Modification of classical RPN by implementing customer perspective [10], performing risk evaluation in terms of risk factors and their implication to risk scenario [11], other factors [9].”
BackgroundCarlson, C. S. (2012) · Wiley eBooks · doi:10.1002/9781118312575 · Cited by 236 · cited 2×
“The FMEA method was an inspiration for other methods and tools such as RCM (reliability center management), concept FMEA and FMEDA [7].”
MethodA novel multiple-criteria decision-making-based FMEA model for risk assessment
Lo, H.-W., & Liou, J. J. H. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.09.020 · Cited by 231 · cited 1×
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundQin, J., Xi, Y., & Pedrycz, W. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2020.106134 · Cited by 194
Li, Z., & Chen, L. (2018) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2018.10.005 · Cited by 142
Başhan, V., Demirel, H., & Gül, M. (2020) · Soft Computing · doi:10.1007/s00500-020-05108-y · Cited by 132 · cited 2×
“Distance-based methods: • distance operator; • technique for order of preference by similarity to ideal solution (TOPSIS) [27]; • multiattributive border approximation area comparison (MACBAC) [28]; • shortest distance algorithms [29].”
BackgroundFailure Mode and Effects Analysis by Using the House of Reliability-Based Rough VIKOR Approach
Wang, Z., Gao, J.-M., Wang, R.-X., Chen, K., Gao, Z.-Y., & Zheng, W. (2018) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2778316 · Cited by 105 · cited 1×
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundYener, Y., & Can, G. F. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.115413 · Cited by 69
A DMAIC Integrated Fuzzy FMEA Model: A Case Study in the Automotive Industry
Godina, R., Silva, B. G. R., & Espadinha-Cruz, P. (2021) · Applied Sciences · doi:10.3390/app11083726 · Cited by 67
A new risk prioritization model for failure mode and effects analysis
Anes, V., Henriques, E. M. P., Freitas, M., & Reis, L. G. (2018) · Quality and Reliability Engineering International · doi:10.1002/qre.2269 · Cited by 63 · cited 1×
“Modification of classical RPN by implementing customer perspective [10], performing risk evaluation in terms of risk factors and their implication to risk scenario [11], other factors [9].”
BackgroundReview of hydraulic seal failures due to effect of medium to high temperature
Mahankar, P. S., & Dhoble, A. S. (2021) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2021.105552 · Cited by 50 · cited 1×
“Another reported failure is leaking due to the sealing failure [40].”
BackgroundAMWRPN: Ambiguity Measure Weighted Risk Priority Number Model for Failure Mode and Effects Analysis
Tang, Y., Zhou, D., & Chan, F. T. S. (2018) · IEEE Access · doi:10.1109/access.2018.2836139 · Cited by 46 · cited 1×
“Implementing risk factors weights: [16,17].”
An information fusion FMEA method to assess the risk of healthcare waste
Ouyang, L., Zhu, Y., Zheng, W., & Yan, L. F. (2021) · Journal of Management Science and Engineering · doi:10.1016/j.jmse.2021.01.001 · Cited by 45
Deng Entropy Weighted Risk Priority Number Model for Failure Mode and Effects Analysis
Zheng, H., & Tang, Y. (2020) · Entropy · doi:10.3390/e22030280 · Cited by 39
Assessment of structural risks using the fuzzy weighted Euclidean FMEA and block diagram analysis
Park, J., Park, C., & Ahn, S. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1844-x · Cited by 37
FMECA-based maintenance planning through COPRAS-G and PSI
Pancholi, N., & Bhatt, M. G. (2018) · Journal of Quality in Maintenance Engineering · doi:10.1108/jqme-03-2017-0015 · Cited by 35 · cited 1×
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundImproving risk assessment for customer-oriented FMEA
Koomsap, P., & Charoenchokdilok, T. (2016) · Total Quality Management & Business Excellence · doi:10.1080/14783363.2016.1274229 · Cited by 34 · cited 1×
“Modification of classical RPN by implementing customer perspective [10], performing risk evaluation in terms of risk factors and their implication to risk scenario [11], other factors [9].”
BackgroundPrioritization of Corrective Actions from Utility Viewpoint in FMEA Application
Chen, J. (2016) · Quality and Reliability Engineering International · doi:10.1002/qre.2064 · Cited by 32 · cited 1×
“• expected cost [12]; • corrective actions [13]; • maintainability criticality index [14]; • division of the main risk factors into subfactors [15].”
BackgroundThe idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems
Filo, G., Fabiś-Domagała, J., Domagała, M., Lisowski, E., & Momeni, H. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201818303009 · Cited by 31
Self-citationFailure Analysis for Hydraulic System of Heavy-Duty Machine Tool with Incomplete Failure Data
Li, S., Yang, Z., Tian, H., Chen, C., Zhu, Y., Deng, F., & Lu, S. (2021) · Applied Sciences · doi:10.3390/app11031249 · Cited by 30 · cited 1×
“It agrees with practical experience and also with the results of research presented in study [2] where failure analysis was conducted for a hydraulic system of a heavy-duty machine.”
ResultFailure analysis of a hydraulic power system in the wind turbine
Lee, Y.-B., Lee, G.-C., Yang, J.-D., Park, J.-W., & Baek, D.-C. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.104218 · Cited by 25
Optimization of dangerous goods transport in urban zone
Ebrahimi, H., & Tadic, M. (2018) · Decision Making Applications in Management and Engineering · doi:10.31181/dmame1802138e · Cited by 23 · cited 1×
“• distance operator; • technique for order of preference by similarity to ideal solution (TOPSIS) [27]; • multiattributive border approximation area comparison (MACBAC) [28]; • shortest distance algorithms [29].”
BackgroundGuo, Y., Xiong, G., Zeng, L., & Li, Q. (2021) · Energies · doi:10.3390/en14092456 · Cited by 23
Shi, S., Fei, H., & Xu, X. (2019) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2019.11.368 · Cited by 22
A Matrix FMEA Analysis of Variable Delivery Vane Pumps
Fabiś-Domagała, J., Domagała, M., & Momeni, H. (2021) · Energies · doi:10.3390/en14061741 · Cited by 22 · cited 1×
“We assumed that components are valued in the way similar to that which was presented in our previous study [31]:”
MethodSelf-citationFailure of a heavy-duty hydraulic cylinder and its fatigue re-design
Nicoletto, G., & Marin, T. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2010.12.019 · Cited by 20 · cited 1×
“Research shows that fatigue failures may occur much sooner [38,39].”
BackgroundKushwaha, P., Dasgupta, K., & Ghoshal, S. K. (2021) · ISA Transactions · doi:10.1016/j.isatra.2021.03.020 · Cited by 18 · cited 1×
“Fluid power is not a new technology, but, complemented with the electronic control system [1], it offers new possibilities and can be one of the leaders among drive systems.”
BackgroundA Simplified Methodology to Evaluate the Design Specifications of Hydraulic Components
Roquet, P., Gamez-Montero, P. J., Castilla, R., Raush, G., & Codina, E. (2018) · Applied Sciences · doi:10.3390/app8091612 · Cited by 7 · cited 1×
“Research shows that fatigue failures may occur much sooner [38,39].”
Background
Research works printed but not linked: 4
- Biswas, 2019, An ensemble approach for portfolio selection in a mutli-criteria descision making framework, Decis. Making Appl. Manag. Eng., 2, 138
- Aggarwal, K.K. (1993). Reliability Engineering, Springer Science+Business Media.
- Han, J. (2012). Data Mining, Morgan Kaufmann. [3rd ed.].
- Watton, J. (2007). Modelling, Monitoring and Diagnostic Techniques for Fluid Power Systems, Springer.
Cited by
Risk prioritization using a modified FMEA analysis in industry 4.0
Salah, B., Alnahhal, M., & Ali, M. (2023) · Journal of Engineering Research · doi:10.1016/j.jer.2023.07.001 · Cited by 65
Akhtar, M. J., Naseem, A., & Ahsan, F. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107876 · Cited by 45
Towards Trustworthy Safety Assessment by Providing Expert and Tool-Based XMECA Techniques
Babeshko, I., Illiashenko, O. A., Kharchenko, V. S., & Leontiiev, K. (2022) · Mathematics · doi:10.3390/math10132297 · Cited by 28
Comprehensive technical risk indices and advanced methodologies for power system risk management
Yaghoubi, E., Yaghoubi, E., Maghami, M. R., & Jahromi, M. Z. (2025) · Electric Power Systems Research · doi:10.1016/j.epsr.2025.111534 · Cited by 25
A Concept of Risk Prioritization in FMEA of Fluid Power Components
Fabiś-Domagała, J., & Domagała, M. (2022) · Energies · doi:10.3390/en15176180 · Cited by 22
Metadata
- Authors
- Fabis-Domagala, J., Domagala, M., & Momeni, H.
- Affiliations
- Faculty of Mechanical Engineering, Cracow University of Technology, Al. Jana Pawla II 37, 31-864 Cracow, Poland
- Western Norway University of Applied Sciences (NO)
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2021-10-10
- Volume
- 14
- Issue
- 20
- Pages
- 6482
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W3207632557
- Cited by
- 31
- References
- 30
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 3 · 2023: 11 · 2022: 7 · 2021: 1
- FWCI
- 4.12
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- NORA - Norwegian Open Research Archives (submittedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Risk and Safety Analysis
- Social Sciences › Business, Management and Accounting › Strategy and Management › Management Systems and Quality Improvement
- Keywords
- failure mode and effects analysis, risk prioritization, risk priority number, fluid power systems, failure classification, risk assessment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.