CoChat

Amidated Pectin/Nanocellulose Hybrid Cryogel System with a pH-Responsive Release Profile for Small Intestinal Delivery

Open access

The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index; 7 of the 39 sources its claims cite were checked for support.

Abstract

Cellulose nanofibers and pectin are promising candidates for polysaccharide-based gel carriers. However, their integration into a structurally modified hybrid gel system has not been extensively investigated. In this study, hybrid cryogels with a pH-responsive release profile favoring small intestinal delivery were prepared by freeze-drying various ratios of anionic nanofibrillar cellulose (aNFC) and amidated pectin (AP). Under acidic conditions, carboxylate protonation reduced intermolecular electrostatic repulsion, promoting the formation of the aNFC/AP hybrid gel network. Increasing the AP content enhanced the mechanical strength of the hydrogels and resulted in larger pore sizes after freeze-drying. The hybrid cryogels prolonged the release of a model drug for up to 20-30 min at pH 3.0, while exhibiting rapid release within 1-2 min when the pH exceeded 6.5, due to gel network collapse. The release behavior was governed by both the porous morphology and the crosslinking density of the cryogel scaffolds. These findings demonstrate that aNFC/AP hybrid cryogels possess a well-defined pH-responsive functional window (pH 6.5-7.0) and hold strong potential as oral drug delivery systems targeting the small intestine.

Overview

CoChat Summary

## TL;DR

This paper develops calcium-free amidated pectin/anionic nanofibrillar cellulose (AP/aNFC) hybrid cryogels for oral drug delivery, aiming for stability in gastric acid and rapid release in the small intestine. The hybrid network shows a pH-responsive window around pH 5.8–7.5, with ketoprofen release delayed up to 20–30 min at pH 3.0 and rapid release within 1–2 min at pH ≥ 5.8.

## Key findings

  • Increasing AP content increased mechanical strength of the hydrogels, and rheology showed pure AP gelation at about 50 min with G′ ~8800 Pa, while mixing with aNFC shifted gelation earlier to about 40 min and raised the final G′ to ~19,000 Pa.
  • In acidic conditions (pH 3.0), all systems showed at least a 5 min lag before release; final ketoprofen concentrations after 240 min remained below 0.8 µg/mL (≈16% of the maximum amount).
  • At pH ≥ 5.8, ketoprofen release began within 1–2 min and reached about 5 µg/mL (≈100%); the paper describes this as rapid release driven by gel network collapse.
  • Weibull fitting was generally strong, with R² = 0.87–0.99 for most samples; the paper reports Korsmeyer–Peppas R² as low as 0.63–0.83 in some cases.
  • The authors state that the hybrid cryogels complete drug release within approximately 120 min under small-intestinal conditions (pH 6–8), while keeping gastric release under 16%.

## Methods

  • The study prepared AP/aNFC hybrid hydrogels by slow acid induction with glucono-δ-lactone (GDL), using 1.0% aNFC and AP at 0.5%, 1%, 2%, or 4%, with ketoprofen loaded at 2.39 mg per precursor batch; the gels were then freeze-dried into cryogels.
  • Characterization included texture profile analysis, rheology, FT-IR, SEM/image analysis of pore morphology, swelling/degradation tests in PBS at pH 3.0, 5.8, and 7.4, and in vitro ketoprofen release under the same pH conditions.
  • Release data were analyzed with Korsmeyer–Peppas and Weibull nonlinear kinetic models; statistics used triplicate experiments, Shapiro–Wilk, Levene’s test, ANOVA, and post hoc tests.

## Limitations

  • The paper states that release was tested only at pH 3.0, 5.8, and 7.4; it did not investigate pH ≥ 8.0 conditions, which the authors note could be relevant in the colon or pathological states.
  • The text makes evident that the work is in vitro only and does not report in vivo gastrointestinal transit, absorption, or therapeutic performance in animals or humans.
  • The paper notes that swelling data cannot fully separate water uptake from matrix degradation because both occur simultaneously; this is a limitation of the measurement approach stated in the text.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/gels11090700

Cites

58 of 58 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 (a) Textural characteristics of anionic nanofibrillar cellulose/amidated pectin (aNFC/AP) hybrid hydrogels. Hardness and cohesiveness were determined by texture profile analysis. Values are mean ± SD (n = 3). Different letters within the same column indicate statistically significant differences (p < 0.05, one-way ANOVA with Duncan’s test). (b) Rheological profiles of pure AP gels, aNFC/AP hybrid gels, and urea-treated hybrid gels showing the evolution of storage modulus (G′) and loss modulus (G″) over time. Red arrows indicate the time points where G′ increased.
Figure 1 (a) Textural characteristics of anionic nanofibrillar cellulose/amidated pectin (aNFC/AP) hybrid hydrogels. Hardness and cohesiveness were determined by texture profile analysis. Values are mean ± SD (n = 3). Different letters within the same column indicate statistically significant differences (p < 0.05, one-way ANOVA with Duncan’s test). (b) Rheological profiles of pure AP gels, aNFC/AP hybrid gels, and urea-treated hybrid gels showing the evolution of storage modulus (G′) and loss modulus (G″) over time. Red arrows indicate the time points where G′ increased.CC BY · PubMed Central
Figure 2 (a) FT-IR spectra of pure amidated pectin (AP), pure anionic nanofibrillar cellulose (aNFC), and hybrid aNFC/AP cryogels with different composition ratios. Characteristic absorption changes near 3321, 1725, and 1600 cm−1 are indicated with arrows, and the corresponding functional groups are labeled in the text boxes with black borders. (b) FT-IR spectra of 1aNFC-4AP cryogels prepared with varying GDL concentrations (0, 0.02, 0.05, 0.1, and 0.2 mM), showing the progressive enhancement of the 1725 cm−1 peak and the concomitant decrease of the 1600 cm−1 peak as GDL concentration increases, as highlighted in the red frame.
Figure 2 (a) FT-IR spectra of pure amidated pectin (AP), pure anionic nanofibrillar cellulose (aNFC), and hybrid aNFC/AP cryogels with different composition ratios. Characteristic absorption changes near 3321, 1725, and 1600 cm−1 are indicated with arrows, and the corresponding functional groups are labeled in the text boxes with black borders. (b) FT-IR spectra of 1aNFC-4AP cryogels prepared with varying GDL concentrations (0, 0.02, 0.05, 0.1, and 0.2 mM), showing the progressive enhancement of the 1725 cm−1 peak and the concomitant decrease of the 1600 cm−1 peak as GDL concentration increases, as highlighted in the red frame.CC BY · PubMed Central
Figure 3 Morphology of hybrid aNFC/AP cryogels. (a) Representative SEM micrographs of cryogel cross-sections prepared from aNFC, AP, and hybrid aNFC/AP systems with different composition ratios (2aNFC-1AP, 1aNFC-1AP, 1aNFC-2AP, and 1aNFC-4AP). Scale bars = 500 µm. (b) Quantitative pore structure analysis obtained from ImageJ 1.54p: average pore area (blue bars, left Y-axis) and porosity (yellow bars, right Y-axis). Values are mean ± SD (n = 3). Different letters indicate statistically significant differences (p < 0.05, one-way ANOVA with Duncan’s multiple range test). Middle panel: pore size distribution curves; right panel: pore area distribution histograms for the different cryogel formulations.
Figure 3 Morphology of hybrid aNFC/AP cryogels. (a) Representative SEM micrographs of cryogel cross-sections prepared from aNFC, AP, and hybrid aNFC/AP systems with different composition ratios (2aNFC-1AP, 1aNFC-1AP, 1aNFC-2AP, and 1aNFC-4AP). Scale bars = 500 µm. (b) Quantitative pore structure analysis obtained from ImageJ 1.54p: average pore area (blue bars, left Y-axis) and porosity (yellow bars, right Y-axis). Values are mean ± SD (n = 3). Different letters indicate statistically significant differences (p < 0.05, one-way ANOVA with Duncan’s multiple range test). Middle panel: pore size distribution curves; right panel: pore area distribution histograms for the different cryogel formulations.CC BY · PubMed Central
Figure 4 Swelling behavior and macroscopic appearance of cryogels under different pH conditions. (a–c) Changes in the swelling ratio (weight ratio relative to dry weight, %) of cryogels during immersion in PBS at pH 3.0, 5.8, and 7.4 (37 °C). Data are mean ± SD (n = 3); error bars represent SD; (d) Representative macroscopic appearances of aNFC, AP, and 1aNFC-1AP cryogels after 240 min of immersion in PBS buffer at different pH values (3.0, 5.8, and 7.4).
Figure 4 Swelling behavior and macroscopic appearance of cryogels under different pH conditions. (a–c) Changes in the swelling ratio (weight ratio relative to dry weight, %) of cryogels during immersion in PBS at pH 3.0, 5.8, and 7.4 (37 °C). Data are mean ± SD (n = 3); error bars represent SD; (d) Representative macroscopic appearances of aNFC, AP, and 1aNFC-1AP cryogels after 240 min of immersion in PBS buffer at different pH values (3.0, 5.8, and 7.4).CC BY · PubMed Central
Figure 5 The release of the ketoprofen from pure anionic nanofiber cellulose (aNFC), pure amidated pectin (AP) and all hybrid aNFC/AP cryogels at 37 °C in PBS buffer with pH 3.0 (a), 5.8 (b), and 7.4 (c). Data are mean ± SD (n = 3); error bars represent SD; schematic diagram of the formation of aNFC/AP cryogels gel network and release behavior in various pH environments (d). GDL represents glucono-δ-lactone; AP and aNFC represents amidated pectin and anionic nanofibrillar cellulose, respectively. The arrow guides the entire process of transforming the system from aNFC gel network to aNFC/AP hybrid gel network.
Figure 5 The release of the ketoprofen from pure anionic nanofiber cellulose (aNFC), pure amidated pectin (AP) and all hybrid aNFC/AP cryogels at 37 °C in PBS buffer with pH 3.0 (a), 5.8 (b), and 7.4 (c). Data are mean ± SD (n = 3); error bars represent SD; schematic diagram of the formation of aNFC/AP cryogels gel network and release behavior in various pH environments (d). GDL represents glucono-δ-lactone; AP and aNFC represents amidated pectin and anionic nanofibrillar cellulose, respectively. The arrow guides the entire process of transforming the system from aNFC gel network to aNFC/AP hybrid gel network.CC BY · PubMed Central
Figure 6 Release kinetics of ketoprofen from pure anionic nanofibrillar cellulose (aNFC), pure amidated pectin (AP), and hybrid aNFC/AP cryogels at 37 °C in PBS buffer with pH 3.0, 5.8, and 7.4. (a) Fitting of the experimental release data (symbols) with the Korsmeyer–Peppas model (solid lines). (b) Fitting of the same data with the Weibull model.
Figure 6 Release kinetics of ketoprofen from pure anionic nanofibrillar cellulose (aNFC), pure amidated pectin (AP), and hybrid aNFC/AP cryogels at 37 °C in PBS buffer with pH 3.0, 5.8, and 7.4. (a) Fitting of the experimental release data (symbols) with the Korsmeyer–Peppas model (solid lines). (b) Fitting of the same data with the Weibull model.CC BY · PubMed Central

Verification

Claims the paper makes

5 Valid · 3 Not valid · 28 Not checked · 122 Own results and interpretations

70 more claims

Create a free account to see all 158 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 14
  • It may state two separate claims as one. 71
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 58 references

Research works printed but not linked: 2

  1. Borawake D.D. Pande V.V. Giri M.A. Mesoporous Silica Nanoparticles as Theranostic Platform for Smart Drug Delivery: A Review J. Nanosci. Nanomed. 2017 2017 JNAN-125
  2. Sriamornsak P. Chemistry of pectin and its pharmaceutical uses: A review Silpakorn Univ. Int. J. 2003 3 206 228

Cited by

See all 5

Metadata

Authors
Feng, S., Laurén, P., Zini, J., Gounani, Z., Bi, J., Yi, J., & Laaksonen, T.
Affiliations
  • University of Helsinki (FI)
  • Institute of Food Science and Technology (CN)
Corresponding author
  • Feng, Shuhan
  • Laaksonen, Timo
Venue
Gels
Publisher
MDPI AG
Published
2025-09-02
Volume
11
Issue
9
Pages
700
ISSN
2310-2861 (ISSN-L)
OpenAlex
W4413922402
Cited by
5
References
54
Citations by year
2026: 4 · 2025: 1
FWCI
1.41
Type
journal article
Language
en
Open access
Locations
  • Gels (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • PubMed Central (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Työväentutkimus Vuosikirja (submittedVersion)
  • Tampere University Institutional Repository (Tampere University) (submittedVersion, cc-by)
Funders
  • European Research Council (101001016, 202203250050)
  • China Scholarship Council (CSC) (101001016, 202203250050)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
  • Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
  • Life Sciences › Agricultural and Biological Sciences › Food Science › Polysaccharides Composition and Applications
Keywords
amidated pectin, pH-responsive drug release, oral drug delivery, freeze-drying, polysaccharide hydrogels, carboxylate protonation, crosslink density, porous morphology, drug release kinetics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Amidated Pectin/Nanocellulose Hybrid Cryogel System with a pH-Responsive Release Profile for Small Intestinal Delivery. https://app.cochat.ai/papers/10.3390/gels11090700
The paper
Feng, S., Laurén, P., Zini, J., Gounani, Z., Bi, J., Yi, J., & Laaksonen, T. (2025). Amidated Pectin/Nanocellulose Hybrid Cryogel System with a pH-Responsive Release Profile for Small Intestinal Delivery. Gels. https://doi.org/10.3390/gels11090700

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.