The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production
Open accessAbstract
Using polymer materials to fabricate microfluidic devices provides simple, cost effective, and disposal advantages for both lab-on-a-chip (LOC) devices and micro total analysis systems (μTAS). Polydimethylsiloxane (PDMS) elastomer and thermoplastics are the two major polymer materials used in microfluidics. The fabrication of PDMS and thermoplastic microfluidic device can be categorized as front-end polymer microchannel fabrication and post-end microfluidic bonding procedures, respectively. PDMS and thermoplastic materials each have unique advantages and their use is indispensable in polymer microfluidics. Therefore, the proper selection of polymer microfabrication is necessary for the successful application of microfluidics. In this paper, we give a short overview of polymer microfabrication methods for microfluidics and discuss current challenges and future opportunities for research in polymer microfluidics fabrication. We summarize standard approaches, as well as state-of-art polymer microfluidic fabrication methods. Currently, the polymer microfluidic device is at the stage of technology transition from research labs to commercial production. Thus, critical consideration is also required with respect to the commercialization aspects of fabricating polymer microfluidics. This article provides easy-to-understand illustrations and targets to assist the research community in selecting proper polymer microfabrication strategies in microfluidics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<550::aid-anie550>3.0.co;2-g · Cited by 4,285
Monolithic Microfabricated Valves and Pumps by Multilayer Soft Lithography
Unger, M. A., Chou, H.-P., Thorsen, T., Scherer, A., & Quake, S. R. (2000) · Science · doi:10.1126/science.288.5463.113 · Cited by 4,010
Miniaturized total chemical analysis systems: A novel concept for chemical sensing
Manz, A., Graber, N., & Widmer, H. M. (1990) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(90)80209-i · Cited by 3,122
Poly(dimethylsiloxane) as a Material for Fabricating Microfluidic Devices
McDonald, J. C., & Whitesides, G. M. (2002) · Accounts of Chemical Research · doi:10.1021/ar010110q · Cited by 2,454
Paper-based microfluidic point-of-care diagnostic devices
Yetisen, A. K., Akram, M. S., & Lowe, C. R. (2013) · Lab on a Chip · doi:10.1039/c3lc50169h · Cited by 1,943
Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies
Sia, S. K., & Whitesides, G. M. (2003) · ELECTROPHORESIS · doi:10.1002/elps.200305584 · Cited by 1,717
Becker, H. (2002) · Talanta · doi:10.1016/s0039-9140(01)00594-x · Cited by 1,187
Advantages and challenges of microfluidic cell culture in polydimethylsiloxane devices
Halldorsson, S., Lucumi, E., Gómez-Sjöberg, R., & Fleming, R. M. T. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2014.07.029 · Cited by 1,027
Advances in Microfluidic Materials, Functions, Integration, and Applications
Nge, P. N., Rogers, C. I., & Woolley, A. T. (2013) · Chemical Reviews · doi:10.1021/cr300337x · Cited by 958
Engineers are from PDMS-land, Biologists are from Polystyrenia
Berthier, E., Young, E. W. K., & Beebe, D. (2012) · Lab on a Chip · doi:10.1039/c2lc20982a · Cited by 799
3D printed microfluidics for biological applications
Ho, C. M. B., Ng, S. H., Li, K. H. H., & Yoon, Y.-J. (2015) · Lab on a Chip · doi:10.1039/c5lc00685f · Cited by 704
Bonding of thermoplastic polymer microfluidics
Tsao, C.-W., & DeVoe, D. L. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-008-0361-x · Cited by 601
Self-citationDetermining the optimal PDMS–PDMS bonding technique for microfluidic devices
Eddings, M. A., Johnson, M. A., & Gale, B. K. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/6/067001 · Cited by 567
Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices
Guckenberger, D. J., de Groot, T. E., Wan, A. M. D., Beebe, D. J., & Young, E. W. K. (2015) · Lab on a Chip · doi:10.1039/c5lc00234f · Cited by 513
Lab-on-a-chip devices: How to close and plug the lab?
Temiz, Y., Lovchik, R. D., Kaigala, G. V., & Delamarche, E. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2014.10.013 · Cited by 475
Micro-injection moulding of polymer microfluidic devices
Attia, U. M., Marson, S., & Alcock, J. R. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-009-0421-x · Cited by 474
Oxygen plasma treatment for reducing hydrophobicity of a sealed polydimethylsiloxane microchannel
Tan, S. H., Nguyen, N.-T., Chua, Y. C., & Kang, T. G. (2010) · Biomicrofluidics · doi:10.1063/1.3466882 · Cited by 440
Microfluidic cell culture systems for drug research
Wu, M.-H., Huang, S.-B., & Lee, G.-B. (2010) · Lab on a Chip · doi:10.1039/b921695b · Cited by 432
Fabrication of microfluidic devices using polydimethylsiloxane
Friend, J., & Yeo, L. (2010) · Biomicrofluidics · doi:10.1063/1.3259624 · Cited by 425
Surface Modification of Poly(dimethylsiloxane) Microfluidic Devices by Ultraviolet Polymer Grafting
Hu, S., Ren, X., Bachman, M., Sims, C. E., Li, G. P., & Allbritton, N. (2002) · Analytical Chemistry · doi:10.1021/ac025700w · Cited by 418
Rapid prototyping polymers for microfluidic devices and high pressure injections
Sollier, E., Murray, C., Maoddi, P., & Di Carlo, D. (2011) · Lab on a Chip · doi:10.1039/c1lc20514e · Cited by 407
Mehling, M., & Tay, S. (2014) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2013.10.005 · Cited by 390
Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
Au, A. K., Lee, W., & Folch, A. (2014) · Lab Chip · doi:10.1039/c3lc51360b · Cited by 380
Surface modification for PDMS‐based microfluidic devices
Zhou, J., Khodakov, D. A., Ellis, A. V., & Voelcker, N. H. (2012) · ELECTROPHORESIS · doi:10.1002/elps.201100482 · Cited by 344
Active droplet generation in microfluidics
Chong, Z. Z., Tan, S. H., Gañán-Calvo, A. M., Tor, S. B., Loh, N. H., & Nguyen, N.-T. (2016) · Lab on a Chip · doi:10.1039/c5lc01012h · Cited by 297
van Midwoud, P. M., Janse, A., Merema, M. T., Groothuis, G. M. M., & Verpoorte, E. (2012) · Analytical Chemistry · doi:10.1021/ac300771z · Cited by 274
Lab-on-a-Foil: microfluidics on thin and flexible films
Focke, M., Kosse, D., Müller, C., Reinecke, H., Zengerle, R., & von Stetten, F. (2010) · Lab on a Chip · doi:10.1039/c001195a · Cited by 255
Micro hot embossing of thermoplastic polymers: a review
Peng, L., Deng, Y., Yi, P., & Lai, X. (2014) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/24/1/013001 · Cited by 234
Low-cost rapid prototyping of flexible microfluidic devices using a desktop digital craft cutter
Yuen, P. K., & Goral, V. N. (2010) · Lab Chip · doi:10.1039/b918089c · Cited by 212
Microfluidic very large scale integration (mVLSI) with integrated micromechanical valves
Araci, I. E., & Quake, S. R. (2012) · Lab on a Chip · doi:10.1039/c2lc40258k · Cited by 209
Injection molded microfluidic chips featuring integrated interconnects
Mair, D. A., Geiger, E., Pisano, A. P., Fréchet, J. M. J., & Svec, F. (2006) · Lab Chip · doi:10.1039/b605911b · Cited by 193
Femtosecond laser ablation of polymeric substrates for the fabrication of microfluidic channels
Suriano, R., Kuznetsov, A., Eaton, S. M., Kiyan, R., Cerullo, G., Osellame, R., Chichkov, B. N., Levi, M., & Turri, S. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.02.053 · Cited by 191
Polymer-Based Microfluidic Devices for Pharmacy, Biology and Tissue Engineering
Alrifaiy, A., Lindahl, O. A., & Ramser, K. (2012) · Polymers · doi:10.3390/polym4031349 · Cited by 161
Bhattacharyya, A., & Klapperich, C. M. (2005) · Analytical Chemistry · doi:10.1021/ac051449j · Cited by 157
Lab-on-a-Chip hyphenation with mass spectrometry: strategies for bioanalytical applications
Oedit, A., Vulto, P., Ramautar, R., Lindenburg, P. W., & Hankemeier, T. (2014) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2014.08.009 · Cited by 96
Islam, M., Natu, R., & Martínez‐Duarte, R. (2015) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1626-9 · Cited by 82
Wax-bonding 3D microfluidic chips
Gong, X., Yi, X., Xiao, K., Li, S., Kodzius, R., Qin, J., & Wen, W. (2010) · Lab on a Chip · doi:10.1039/c004744a · Cited by 71
An oxidized liquid metal-based microfluidic platform for tunable electronic device applications
Li, G., Parmar, M., & Lee, D. (2014) · Lab on a Chip · doi:10.1039/c4lc01013b · Cited by 67
Liquid phase solvent bonding of plastic microfluidic devices assisted by retention grooves
Wan, A. M. D., Sadri, A., & Young, E. W. K. (2015) · Lab on a Chip · doi:10.1039/c5lc00729a · Cited by 57
A doubly cross-linked nano-adhesive for the reliable sealing of flexible microfluidic devices
You, J. B., Min, K., Lee, B., Kim, D., & Im, S. G. (2013) · Lab on a Chip · doi:10.1039/c2lc41266g · Cited by 56
3-dimensional electrode patterning within a microfluidic channel using metal ion implantation
Choi, J., Rosset, S., Niklaus, M., Adleman, J. R., Shea, H. R., & Psaltis, D. (2010) · Lab on a Chip · doi:10.1039/b917719a · Cited by 56
Balamurugan, S., Kim, N., Lee, W., Spivak, D. A., Nikitopoulos, D. E., McCarley, R. L., & Soper, S. A. (2011) · Langmuir · doi:10.1021/la200298n · Cited by 52
Li, X., Wu, N., Rojanasakul, Y., & Liu, Y. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2012.12.037 · Cited by 48
Konstantinou, D., Shirazi, A., Sadri, A., & Young, E. W. K. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.04.147 · Cited by 39
Fabrication improvements for thermoset polyester (TPE) microfluidic devices
Fiorini, G. S., Yim, M., Jeffries, G. D. M., Schiro, P. G., Mutch, S. A., Lorenz, R. M., & Chiu, D. T. (2007) · Lab on a Chip · doi:10.1039/b702548c · Cited by 37
Microfluidic Device Fabrication by Thermoplastic Hot-Embossing
Yang, S., & DeVoe, D. L. (2012) · Methods in molecular biology · doi:10.1007/978-1-62703-134-9_8 · Cited by 36
Vella, P. C., Dimov, S., Brousseau, E., & Whiteside, B. R. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6148-1 · Cited by 21
Thermoplastic building blocks for the fabrication of microfluidic masters
Stoller, M. A., Konda, A., Kottwitz, M. A., & Morin, S. A. (2015) · RSC Advances · doi:10.1039/c5ra22742a · Cited by 12
Cited by
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Wongkaew, N., Simsek, M., Griesche, C., & Baeumner, A. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00172 · Cited by 657
Liquid Biopsies in Cancer Diagnosis, Monitoring, and Prognosis
De Rubis, G., Rajeev Krishnan, S., & Bebawy, M. (2019) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2019.01.006 · Cited by 535
Microfluidic Devices: A Tool for Nanoparticle Synthesis and Performance Evaluation
Gimondi, S., Ferreira, H., Reis, R. L., & Neves, N. M. (2023) · ACS Nano · doi:10.1021/acsnano.3c01117 · Cited by 376
Microfluidics: Innovations in Materials and Their Fabrication and Functionalization
Nielsen, J. B., Hanson, R. L., Almughamsi, H. M., Pang, C., Fish, T. R., & Woolley, A. T. (2020) · Analytical Chemistry · doi:10.1021/acs.analchem.9b04986 · Cited by 359
Metadata
- Authors
- Tsao, C.-W.
- Venue
- Micromachines
- Publisher
- MDPI AG
- Published
- 2016-12-10
- Volume
- 7
- Issue
- 12
- Pages
- 225
- ISSN
- 2072-666X (ISSN-L)
- OpenAlex
- W2562178559
- Cited by
- 367
- References
- 49
- FWCI
- 12.62
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.