The DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability
Open accessAbstract
Environmental impacts and consumer concerns have necessitated the study of bio-based materials as alternatives to petrochemicals for packaging applications. The purpose of this review is to summarize synthetic and non-synthetic materials feasible for packaging and textile applications, routes of upscaling, (industrial) applications, evaluation of sustainability, and end-of-life options. The outlined bio-based materials include polylactic acid, polyethylene furanoate, polybutylene succinate, and non-synthetically produced polymers such as polyhydrodyalkanoate, cellulose, starch, proteins, lipids, and waxes. Further emphasis is placed on modification techniques (coating and surface modification), biocomposites, multilayers, and additives used to adjust properties especially for barriers to gas and moisture and to tune their biodegradability. Overall, this review provides a holistic view of bio-based packaging material including processing, and an evaluation of the sustainability of and options for recycling. Thus, this review contributes to increasing the knowledge of available sustainable bio-based packaging material and enhancing the transfer of scientific results into applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Werpy, T., & Petersen, G. (2004) · doi:10.2172/15008859 · Cited by 3,201
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
A microbial polyhydroxyalkanoates (PHA) based bio- and materials industry
Chen, G.-Q. (2009) · Chemical Society Reviews · doi:10.1039/b812677c · Cited by 1,303
Chitin/chitosan: modifications and their unlimited application potential—an overview
Harish Prashanth, K. V., & Tharanathan, R. N. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.10.022 · Cited by 1,147
Current progress on bio-based polymers and their future trends
Babu, R. P., O'Connor, K., & Seeram, R. (2013) · Progress in Biomaterials · doi:10.1186/2194-0517-2-8 · Cited by 1,126
Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications
(2010) · Wiley eBooks · doi:10.1002/9780470649848 · Cited by 1,058
Modeling properties of nylon 6/clay nanocomposites using composite theories
Fornes, T. D., & Paul, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(03)00471-3 · Cited by 990
Hydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 943
Self-citationNagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Advances in Edible Coatings for Fresh Fruits and Vegetables: A Review
Dhall, R. K. (2013) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.541568 · Cited by 884
Geueke, B., Groh, K., & Muncke, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.005 · Cited by 673
Replacing fossil based PET with biobased PEF; process analysis, energy and GHG balance
Eerhart, A. J. J. E., Faaij, A. P. C., & Patel, M. K. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02480b · Cited by 666
Narancic, T., Verstichel, S., Reddy Chaganti, S., Morales-Gamez, L., Kenny, S. T., De Wilde, B., Babu Padamati, R., & O’Connor, K. E. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02963 · Cited by 632
Self-citationApplication of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
The development and challenges of poly (lactic acid) and poly (glycolic acid)
Jem, K. J., & Tan, B. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.002 · Cited by 615
β-Lactoglobulin and WPI aggregates: Formation, structure and applications
Nicolai, T., Britten, M., & Schmitt, C. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2011.02.006 · Cited by 575
Clay-Based Polymer Nanocomposites: Research and Commercial Development
Zeng, Q. H., Yu, A. B., Lu, G. Q. (., & Paul, D. R. (2005) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2005.411 · Cited by 575
Lee, R. A., & Lavoie, J.-M. (2013) · Animal Frontiers · doi:10.2527/af.2013-0010 · Cited by 571
Recycling of Polymer-Based Multilayer Packaging: A Review
Kaiser, K., Schmid, M., & Schlummer, M. (2017) · Recycling · doi:10.3390/recycling3010001 · Cited by 549
Self-citationFactors Affecting the Moisture Permeability of Lipid-Based Edible Films: A Review
Morillon, V., Debeaufort, F., Blond, G., Capelle, M., & Voilley, A. (2002) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408690290825466 · Cited by 527
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Physical properties of ultrasound treated soy proteins
Jambrak, A. R., Lelas, V., Mason, T. J., Krešić, G., & Badanjak, M. (2009) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2009.02.001 · Cited by 520
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Bio-based plastics - A review of environmental, social and economic impact assessments
Spierling, S., Knüpffer, E., Behnsen, H., Mudersbach, M., Krieg, H., Springer, S., Albrecht, S., Herrmann, C., & Endres, H.-J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.014 · Cited by 502
Álvarez-Chávez, C. R., Edwards, S., Moure-Eraso, R., & Geiser, K. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.10.003 · Cited by 491
Bio-based and biodegradable polymers - State-of-the-art, challenges and emerging trends
RameshKumar, S., Shaiju, P., O'Connor, K. E., & P, R. B. (2020) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.12.005 · Cited by 479
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Mueller, R.-J. (2006) · Process Biochemistry · doi:10.1016/j.procbio.2006.05.018 · Cited by 428
Radano, C. P., Baker, G. L., & Smith, M. R. (2000) · Journal of the American Chemical Society · doi:10.1021/ja9930519 · Cited by 403
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Oxygen sorption and transport in amorphous poly(ethylene furanoate)
Burgess, S. K., Karvan, O., Johnson, J. R., Kriegel, R. M., & Koros, W. J. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.041 · Cited by 334
Itaconic acid – a versatile building block for renewable polyesters with enhanced functionality
Robert, T., & Friebel, S. (2016) · Green Chemistry · doi:10.1039/c6gc00605a · Cited by 333
Johansson, C., Bras, J., Mondragon, I., Nechita, P., Plackett, D., Šimon, P., Gregor Svetec, D., Virtanen, S., Giacinti Baschetti, M., Breen, C., et al. (2012) · BioResources · doi:10.15376/biores.7.2.2506-2552 · Cited by 327
Control of thermal degradation of polylactide (PLA)-clay nanocomposites using chain extenders
Najafi, N., Heuzey, M. C., Carreau, P. J., & Wood-Adams, P. M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.01.016 · Cited by 315
Protein-Based Films: Advances in the Development of Biomaterials Applicable to Food Packaging
Calva-Estrada, S. J., Jiménez-Fernández, M., & Lugo-Cervantes, E. (2019) · Food Engineering Reviews · doi:10.1007/s12393-019-09189-w · Cited by 312
Abdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Recent Advances in Biodegradable Nanocomposites
Pandey, J. K., Kumar, A. P., Misra, M., Mohanty, A. K., Drzal, L. T., & Palsingh, R. (2005) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2005.111 · Cited by 298
Whey Protein Emulsion Film Performance as Affected by Lipid Type and Amount
SHELLHAMMER, T. H., & KROCHTA, J. M. (1997) · Journal of Food Science · doi:10.1111/j.1365-2621.1997.tb04008.x · Cited by 295
Gorrasi, G., & Pantani, R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.005 · Cited by 290
Water vapor permeability of biodegradable polymers
Shogren, R. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763592 · Cited by 287
Need a bag? A review of public policies on plastic carrier bags – Where, how and to what effect?
Nielsen, T. D., Holmberg, K., & Stripple, J. (2019) · Waste Management · doi:10.1016/j.wasman.2019.02.025 · Cited by 283
The rate of biodegradation of PHA bioplastics in the marine environment: A meta-study
Dilkes-Hoffman, L. S., Lant, P. A., Laycock, B., & Pratt, S. (2019) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2019.03.020 · Cited by 280
Cosate de Andrade, M. F., Souza, P. M. S., Cavalett, O., & Morales, A. R. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0787-2 · Cited by 275
Recent developments in Polyhydroxyalkanoates (PHAs) production – A review
Sabapathy, P. C., Devaraj, S., Meixner, K., Anburajan, P., Kathirvel, P., Ravikumar, Y., Zabed, H. M., & Qi, X. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123132 · Cited by 275
Zink, J., Wyrobnik, T., Prinz, T., & Schmid, M. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17091376 · Cited by 269
Self-citationPérez-Gago, M. B., & Krochta, J. M. (2001) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf000615f · Cited by 263
Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ™ Polylactide Production
Vink, E. T. H., & Davies, S. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0003 · Cited by 256
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Ovitt, T. M., & Coates, G. W. (2000) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/1099-0518(200012)38:1+<4686::aid-pola80>3.0.co;2-0 · Cited by 237
Poly(lactic acid)/poly(lactic-co-glycolic acid)-based microparticles: an overview
Blasi, P. (2019) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-019-00453-z · Cited by 235
van den Oever, M., Molenveld, K., van der Zee, M., & Bos, H. (2017) · doi:10.18174/408350 · Cited by 230
Vink, E. T. H., Glassner, D. A., Kolstad, J. J., Wooley, R. J., & O’Connor, R. P. (2007) · Industrial Biotechnology · doi:10.1089/ind.2007.3.058 · Cited by 215
The Portuguese plastic carrier bag tax: The effects on consumers’ behavior
Martinho, G., Balaia, N., & Pires, A. (2017) · Waste Management · doi:10.1016/j.wasman.2017.01.023 · Cited by 214
Melt Rheology of High l-Content Poly(lactic acid)
Palade, L.-I., Lehermeier, H. J., & Dorgan, J. R. (2001) · Macromolecules · doi:10.1021/ma001173b · Cited by 209
Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review
Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016) · Materials · doi:10.3390/ma9060435 · Cited by 206
Biomass to biodegradable polymer (PLA)
Singhvi, M., & Gokhale, D. (2013) · RSC Advances · doi:10.1039/c3ra41592a · Cited by 198
Zhang, Q., Zhang, D., Xu, H., Lu, W., Ren, X., Cai, H., Lei, H., Huo, E., Zhao, Y., Qian, M., et al. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112185 · Cited by 195
Schmid, M., Dallmann, K., Bugnicourt, E., Cordoni, D., Wild, F., Lazzeri, A., & Noller, K. (2012) · International Journal of Polymer Science · doi:10.1155/2012/562381 · Cited by 193
Self-citationChemical Recycling of PLA: A Great Opportunity Towards the Sustainable Development?
Piemonte, V., Sabatini, S., & Gironi, F. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0608-9 · Cited by 193
Biodegradation of poly(l-lactide)
Tokiwa, Y., & Jarerat, A. (2004) · Biotechnology Letters · doi:10.1023/b:bile.0000025927.31028.e3 · Cited by 191
Biodegradable Poly(Lactic Acid): Synthesis, Modification, Processing and Applications
Ren, J. (2010) · doi:10.1007/978-3-642-17596-1 · Cited by 190
Recent progress in selected bio-nanomaterials and their engineering applications: An overview
Mishra, R. K., Ha, S. K., Verma, K., & Tiwari, S. K. (2018) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2018.05.003 · Cited by 190
Pierro, P. D., Chico, B., Villalonga, R., Mariniello, L., Damiao, A. E., Masi, P., & Porta, R. (2006) · Biomacromolecules · doi:10.1021/bm050661u · Cited by 187
Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PLA)
Aliotta, L., Cinelli, P., Coltelli, M. B., Righetti, M. C., Gazzano, M., & Lazzeri, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.041 · Cited by 183
Self-citationEnvironmentally Degradable Bio‐Based Polymeric Blends and Composites
Chiellini, E., Cinelli, P., Chiellini, E., & Imam, S. H. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300126 · Cited by 180
Self-citationMicrobial Succinic Acid, Its Polymer Poly(butylene succinate), and Applications
Xu, J., & Guo, B.-H. (2010) · Microbiology Monographs · doi:10.1007/978-3-642-03287-5_14 · Cited by 176
Hong, S.-I., & Krochta, J. M. (2006) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2005.07.034 · Cited by 169
Laboratory composting of extruded poly(lactic acid) sheets
Ghorpade, V (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00077-8 · Cited by 169
Perinelli, D. R., Cespi, M., Bonacucina, G., & Palmieri, G. F. (2019) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-019-00442-2 · Cited by 162
Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques
Badia, J. D., & Ribes-Greus, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.005 · Cited by 161
Chiellini, E., Cinelli, P., Imam, S. H., & Mao, L. (2001) · Biomacromolecules · doi:10.1021/bm010084j · Cited by 159
Self-citationProperties of Ultraviolet Irradiated Protein Films
Rhim, J., Gennadios, A., Fu, D., Weller, C. L., & Hanna, M. A. (1999) · LWT · doi:10.1006/fstl.1998.0516 · Cited by 151
Stloukal, P., Pekařová, S., Kalendová, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S. C., Maier, G., Šlouf, M., et al. (2015) · Waste Management · doi:10.1016/j.wasman.2015.04.006 · Cited by 144
Imam, S. H., Gordon, S. H., Shogren, R. L., Tosteson, T. R., Govind, N. S., & Greene, R. V. (1999) · Applied and Environmental Microbiology · doi:10.1128/aem.65.2.431-437.1999 · Cited by 144
Ultraviolet Radiation Affects Physical and Molecular Properties of Soy Protein Films
Gennadios, A., Rhim, J., Handa, A., Weller, C. L., & Hanna, M. A. (1998) · Journal of Food Science · doi:10.1111/j.1365-2621.1998.tb15714.x · Cited by 141
Poulose, A. M., Elnour, A. Y., Anis, A., Shaikh, H., Al-Zahrani, S. M., George, J., Al-Wabel, M. I., Usman, A. R. A., Ok, Y. S., Tsang, D. C. W., et al. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.11.076 · Cited by 141
Microbial and quality evaluation of green peppers stored in biodegradable film packaging
Koide, S., & Shi, J. (2006) · Food Control · doi:10.1016/j.foodcont.2006.07.013 · Cited by 138
Thermo-Mechanical Properties of PLA/Short Flax Fiber Biocomposites
Aliotta, L., Gigante, V., Coltelli, M., Cinelli, P., Lazzeri, A., & Seggiani, M. (2019) · Applied Sciences · doi:10.3390/app9183797 · Cited by 137
Self-citationMallegni, N., Phuong, T. V., Coltelli, M., Cinelli, P., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11010148 · Cited by 136
Self-citationCallegarin, F., Gallo, J. Q., Debeaufort, F., & Voilley, A. J. (1997) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-997-0044-x · Cited by 126
Whey Processing, Functionality and Health Benefits
(2008) · Wiley eBooks · doi:10.1002/9780813803845 · Cited by 125
Kijchavengkul, T., Auras, R. A., Rubino, M. I., Ngouajio, M., & Fernandez, R. T. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.01.037 · Cited by 125
Coltelli, M., Bronco, S., & Chinea, C. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.015 · Cited by 124
Self-citationBio-based films prepared with by-products and wastes: environmental assessment
Leceta, I., Etxabide, A., Cabezudo, S., de la Caba, K., & Guerrero, P. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.07.054 · Cited by 120
Cheng, C., Zhou, Y., Lin, M., Wei, P., & Yang, S. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.10.042 · Cited by 120
Aliotta, L., Gigante, V., Coltelli, M., Cinelli, P., & Lazzeri, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20040960 · Cited by 119
Self-citationCinelli, P., Schmid, M., Bugnicourt, E., Wildner, J., Bazzichi, A., Anguillesi, I., & Lazzeri, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.07.007 · Cited by 114
Self-citationBioplastics based on wheat gluten processed by extrusion
Jiménez‐Rosado, M., Zárate-Ramírez, L. S., Romero, A., Bengoechea, C., Partal, P., & Guerrero, A. F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117994 · Cited by 111
Identification of important abiotic and biotic factors in the biodegradation of poly(l-lactic acid)
Husárová, L., Pekařová, S., Stloukal, P., Kucharzcyk, P., Verney, V., Commereuc, S., Ramoné, A., & Koutný, M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.04.050 · Cited by 110
Packaging related properties of commercially available biopolymers – An overview of the status quo
Jost, V. (2018) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2018.36 · Cited by 110
Compatible blends of biorelated polyesters through catalytic transesterification in the melt
Coltelli, M., Toncelli, C., Ciardelli, F., & Bronco, S. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.01.028 · Cited by 107
Self-citationColtelli, M., Cinelli, P., Gigante, V., Aliotta, L., Morganti, P., Panariello, L., & Lazzeri, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20030504 · Cited by 107
Self-citationPrediction of Long-Term Municipal Solid Waste Landfill Settlement Using Constitutive Model
Babu, G. L. S., Reddy, K. R., Chouskey, S. K., & Kulkarni, H. S. (2009) · Practice Periodical of Hazardous Toxic and Radioactive Waste Management · doi:10.1061/(asce)hz.1944-8376.0000024 · Cited by 104
Lawton, J. W., & Fanta, G. F. (1994) · Carbohydrate Polymers · doi:10.1016/0144-8617(94)90190-2 · Cited by 100
Biodegradable trays of thermoplastic starch/poly (lactic acid) coated with beeswax
Reis, M. O., Olivato, J. B., Bilck, A. P., Zanela, J., Grossmann, M. V. E., & Yamashita, F. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.12.045 · Cited by 100
Bone-Conduction Thresholds for Sonic and Ultrasonic Frequencies
Corso, J. F. (1963) · The Journal of the Acoustical Society of America · doi:10.1121/1.1918804 · Cited by 99
Sood, S., Gupta, V. K., Agarwal, S., Dev, K., & Pathania, D. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.103 · Cited by 98
Processability and Degradability of PHA-Based Composites in Terrestrial Environments
Cinelli, P., Seggiani, M., Mallegni, N., Gigante, V., & Lazzeri, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20020284 · Cited by 96
Self-citationBioreactors for succinic acid production processes
Ferone, M., Raganati, F., Olivieri, G., & Marzocchella, A. (2019) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2019.1592105 · Cited by 90
Terzopoulou, Z. N., Tsanaktsis, V., Bikiaris, D. Ν., Exarhopoulos, S., Papageorgiou, D. G., & Papageorgiou, G. Z. (2016) · RSC Advances · doi:10.1039/c6ra15994j · Cited by 86
Bugnicourt, E., Schmid, M. C., McNerney, O., Wildner, J., Smykala, L., Lazzeri, A., & Cinelli, P. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/496207 · Cited by 78
Self-citationDeeth, H. C., & Bansal, N. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812124-5.00001-1 · Cited by 76
Singh, A. A., Sharma, S., Srivastava, M., & Majumdar, A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.246 · Cited by 71
Thermoplastic starch/poly(lactic acid) sheets coated with cross-linked chitosan
Soares, F. C., Yamashita, F., Müller, C. M. O., & Pires, A. T. N. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.09.005 · Cited by 70
Gupta, V. K., Sood, S., Agarwal, S., Saini, A. K., & Pathania, D. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.138 · Cited by 70
Poly(Lactic Acid) and Poly(Butylene Succinate) Blend Fibers Prepared by Melt Spinning Technique
Jompang, L., Thumsorn, S., Wongon, J., Surin, P., Apawet, C., Chaichalermvong, T., Kaabbuathong, N., O-Charoen, N., & Srisawat, N. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.777 · Cited by 68
Cadar, O., Paul, M., Roman, C., Miclean, M., & Majdik, C. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.006 · Cited by 66
Novel Properties of PLA Fibers
Dugan, J. S. (2001) · International Nonwovens Journal · doi:10.1177/1558925001os-01000308 · Cited by 62
Design and scaling of wheat dough extrusion by numerical simulation of flow and heat transfer
Dhanasekharan, K. M., & Kokini, J. L. (2003) · Journal of Food Engineering · doi:10.1016/s0260-8774(03)00065-7 · Cited by 61
Seggiani, M., Cinelli, P., Balestri, E., Mallegni, N., Stefanelli, E., Rossi, A., Lardicci, C., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11050772 · Cited by 60
Self-citationGigante, V., Aliotta, L., Phuong, V. T., Coltelli, M., Cinelli, P., & Lazzeri, A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.09.008 · Cited by 56
Self-citationIyyappan, J., Bharathiraja, B., Baskar, G., & Kamalanaban, E. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.02.067 · Cited by 56
Poulopoulou, N., Kasmi, N., Siampani, M., Terzopoulou, Z. N., Bikiaris, D. Ν., Achilias, D. S., Papageorgiou, D. G., & Papageorgiou, G. Z. (2019) · Polymers · doi:10.3390/polym11030556 · Cited by 53
Biopolymer-Based Lightweight Materials for Packaging Applications
Hu, B. S. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch013 · Cited by 52
Adenosine-Functionalized Biodegradable PLA-b-PEG Nanoparticles Ameliorate Osteoarthritis in Rats
Liu, X., Corciulo, C., Arabagian, S., Ulman, A., & Cronstein, B. N. (2019) · Scientific Reports · doi:10.1038/s41598-019-43834-y · Cited by 50
Coltelli, M., Aliotta, L., Vannozzi, A., Morganti, P., Panariello, L., Danti, S., Neri, S., Fernandez-Avila, C., Fusco, A., Donnarumma, G., et al. (2020) · Journal of Functional Biomaterials · doi:10.3390/jfb11020021 · Cited by 49
Self-citationBalada, E. H., Taylor, M. M., Phillips, J. G., Marmer, W. N., & Brown, E. M. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.02.039 · Cited by 48
Seggiani, M., Gigante, V., Cinelli, P., Coltelli, M., Sandroni, M., Anguillesi, I., & Lazzeri, A. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105900 · Cited by 48
Self-citationFachin, L., & Viotto, W. H. (2004) · International Dairy Journal · doi:10.1016/j.idairyj.2004.07.015 · Cited by 47
Scatto, M., Salmini, E., Castiello, S., Coltelli, M., Conzatti, L., Stagnaro, P., Andreotti, L., & Bronco, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38042 · Cited by 46
Self-citationNawab, A., Alam, F., Haq, M. A., Haider, M. S., Lutfi, Z., Kamaluddin, S., & Hasnain, A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.03.148 · Cited by 44
Righetti, M. C., Cinelli, P., Mallegni, N., Stäbler, A., & Lazzeri, A. (2019) · Polymers · doi:10.3390/polym11020308 · Cited by 42
Self-citationLee, G. S., Moon, B. R., Jeong, H., Shin, J., & Kim, J. G. (2018) · Polymer Chemistry · doi:10.1039/c8py01520a · Cited by 40
Righetti, M. C., Cinelli, P., Mallegni, N., Massa, C. A., Aliotta, L., & Lazzeri, A. (2019) · Materials · doi:10.3390/ma12060990 · Cited by 38
Self-citationNicorescu, I., Loisel, C., Vial, C., Riaublanc, A., Djelveh, G., Cuvelier, G., & Legrand, J. (2008) · Food Research International · doi:10.1016/j.foodres.2008.08.003 · Cited by 37
Preparation of Innovative Skin Compatible Films to Release Polysaccharides for Biobased Beauty Masks
Coltelli, M., Danti, S., Trombi, L., Morganti, P., Donnarumma, G., Baroni, A., Fusco, A., & Lazzeri, A. (2018) · Cosmetics · doi:10.3390/cosmetics5040070 · Cited by 35
Self-citationPhuong, V. T., Gigante, V., Aliotta, L., Coltelli, M., Cinelli, P., & Lazzeri, A. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.12.013 · Cited by 33
Self-citationLi, B., Chen, S., Qiu, Z., Yang, K., Tang, S.-P., Yu, W., & Wang, Y. (2008) · Polymer Bulletin · doi:10.1007/s00289-008-0939-1 · Cited by 26
Khakalo, A., Filpponen, I., & Rojas, O. J. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.013 · Cited by 26
Gazzotti, S., Todisco, S. A., Picozzi, C., Ortenzi, M. A., Farina, H., Lesma, G., & Silvani, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.001 · Cited by 23
Use of biodegradable materials as alternative packaging of typical Calabrian Provola cheese
Piscopo, A., Zappia, A., Bruno, A. D., Pozzo, S., Limbo, S., Piergiovanni, L., & Poiana, M. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100351 · Cited by 23
Yang, H., Gardner, D. J., & Nader, J. W. (2010) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-010-1147-4 · Cited by 22
High‐Strain Shape Memory Behavior of PLA–PEG Multiblock Copolymers and Its Microstructural Origin
Koosomsuan, W., Yamaguchi, M., Phinyocheep, P., & Sirisinha, K. (2018) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24775 · Cited by 20
Oyama, H. T., Tanishima, D., & Maekawa, S. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.10.016 · Cited by 18
Castiello, S., Coltelli, M., Conzatti, L., & Bronco, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36313 · Cited by 16
Self-citationPhysics-based prediction of biopolymer degradation
Abi-Akl, R., Ledieu, E., Enke, T. N., Cordero, O. X., & Cohen, T. (2019) · Soft Matter · doi:10.1039/c9sm00262f · Cited by 15
Whey Protein Films and Coatings
Dangaran, K. L., & Krochta, J. M. (2008) · Wiley eBooks · doi:10.1002/9780813803845.ch6 · Cited by 13
Diblock and triblock copolymers of polylactide and polyglycolide
Sharma, D., Lipp, L., Arora, S., & Singh, J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816874-5.00013-x · Cited by 10
Bajpai, P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-818404-2.00004-7 · Cited by 6
Processing and characterization of PLA/PBAT blends for toughened rigid and flexible items
Gigante, V. (2019) · Electronic Theses and Dissertations Repository (University of Pisa) · Cited by 1
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Cited by
Moshood, T. D., Nawanir, G., Mahmud, F., Mohamad, F., Ahmad, M. H., & AbdulGhani, A. (2022) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2022.100273 · Cited by 784
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
Yang, Y., & Mu, T. (2021) · Green Chemistry · doi:10.1039/d1gc00914a · Cited by 539
Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications
Perera, K. Y., Jaiswal, A. K., & Jaiswal, S. (2023) · Foods · doi:10.3390/foods12122422 · Cited by 440
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Metadata
- Authors
- Reichert, C. L., Bugnicourt, E., Coltelli, M.-B., Cinelli, P., Lazzeri, A., Canesi, I., Braca, F., Martínez, B. M., Alonso, R., Agostinis, L., Verstichel, S., Six, L., Mets, S. D., Gómez, E. C., Ißbrücker, C., Geerinck, R., Nettleton, D. F., Campos, I., Sauter, E., Pieczyk, P., & Schmid, M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-07-14
- Volume
- 12
- Issue
- 7
- Pages
- 1558
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3043148114
- Cited by
- 495
- References
- 147
- FWCI
- 12.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.